/* Print values for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2005 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
-#include "obstack.h"
#include "language.h"
#include "annotate.h"
#include "valprint.h"
static int partial_memory_read (CORE_ADDR memaddr, char *myaddr,
int len, int *errnoptr);
-static void print_hex_chars (struct ui_file *, unsigned char *,
- unsigned int);
-
static void show_print (char *, int);
static void set_print (char *, int);
int
-val_print (struct type *type, char *valaddr, int embedded_offset,
- CORE_ADDR address, struct ui_file *stream, int format, int deref_ref,
- int recurse, enum val_prettyprint pretty)
+val_print (struct type *type, const bfd_byte *valaddr, int embedded_offset,
+ CORE_ADDR address, struct ui_file *stream, int format,
+ int deref_ref, int recurse, enum val_prettyprint pretty)
{
struct type *real_type = check_typedef (type);
if (pretty == Val_pretty_default)
only a stub and we can't find and substitute its complete type, then
print appropriate string and return. */
- if (TYPE_FLAGS (real_type) & TYPE_FLAG_STUB)
+ if (TYPE_STUB (real_type))
{
fprintf_filtered (stream, "<incomplete type>");
gdb_flush (stream);
{
if (val == 0)
{
- printf_filtered ("<address of value unknown>");
+ printf_filtered (_("<address of value unknown>"));
return 0;
}
- if (VALUE_OPTIMIZED_OUT (val))
+ if (value_optimized_out (val))
{
- printf_filtered ("<value optimized out>");
+ printf_filtered (_("<value optimized out>"));
return 0;
}
return LA_VALUE_PRINT (val, stream, format, pretty);
value. STREAM is where to print the value. */
void
-val_print_type_code_int (struct type *type, char *valaddr,
+val_print_type_code_int (struct type *type, const bfd_byte *valaddr,
struct ui_file *stream)
{
if (TYPE_LENGTH (type) > sizeof (LONGEST))
}
else
{
-#ifdef PRINT_TYPELESS_INTEGER
- PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
-#else
print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
unpack_long (type, valaddr));
-#endif
}
}
/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
The raison d'etre of this function is to consolidate printing of
- LONG_LONG's into this one function. Some platforms have long longs but
- don't have a printf() that supports "ll" in the format string. We handle
- these by seeing if the number is representable as either a signed or
- unsigned long, depending upon what format is desired, and if not we just
- bail out and print the number in hex.
-
- The format chars b,h,w,g are from print_scalar_formatted(). If USE_LOCAL,
- format it according to the current language (this should be used for most
- integers which GDB prints, the exception is things like protocols where
- the format of the integer is a protocol thing, not a user-visible thing).
- */
-
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
-static void print_decimal (struct ui_file * stream, char *sign,
- int use_local, ULONGEST val_ulong);
-static void
-print_decimal (struct ui_file *stream, char *sign, int use_local,
- ULONGEST val_ulong)
-{
- unsigned long temp[3];
- int i = 0;
- do
- {
- temp[i] = val_ulong % (1000 * 1000 * 1000);
- val_ulong /= (1000 * 1000 * 1000);
- i++;
- }
- while (val_ulong != 0 && i < (sizeof (temp) / sizeof (temp[0])));
- switch (i)
- {
- case 1:
- fprintf_filtered (stream, "%s%lu",
- sign, temp[0]);
- break;
- case 2:
- fprintf_filtered (stream, "%s%lu%09lu",
- sign, temp[1], temp[0]);
- break;
- case 3:
- fprintf_filtered (stream, "%s%lu%09lu%09lu",
- sign, temp[2], temp[1], temp[0]);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
- return;
-}
-#endif
+ LONG_LONG's into this one function. The format chars b,h,w,g are
+ from print_scalar_formatted(). Numbers are printed using C
+ format.
+
+ USE_C_FORMAT means to use C format in all cases. Without it,
+ 'o' and 'x' format do not include the standard C radix prefix
+ (leading 0 or 0x).
+
+ Hilfinger/2004-09-09: USE_C_FORMAT was originally called USE_LOCAL
+ and was intended to request formating according to the current
+ language and would be used for most integers that GDB prints. The
+ exceptional cases were things like protocols where the format of
+ the integer is a protocol thing, not a user-visible thing). The
+ parameter remains to preserve the information of what things might
+ be printed with language-specific format, should we ever resurrect
+ that capability. */
void
-print_longest (struct ui_file *stream, int format, int use_local,
+print_longest (struct ui_file *stream, int format, int use_c_format,
LONGEST val_long)
{
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
- if (sizeof (long) < sizeof (LONGEST))
- {
- switch (format)
- {
- case 'd':
- {
- /* Print a signed value, that doesn't fit in a long */
- if ((long) val_long != val_long)
- {
- if (val_long < 0)
- print_decimal (stream, "-", use_local, -val_long);
- else
- print_decimal (stream, "", use_local, val_long);
- return;
- }
- break;
- }
- case 'u':
- {
- /* Print an unsigned value, that doesn't fit in a long */
- if ((unsigned long) val_long != (ULONGEST) val_long)
- {
- print_decimal (stream, "", use_local, val_long);
- return;
- }
- break;
- }
- case 'x':
- case 'o':
- case 'b':
- case 'h':
- case 'w':
- case 'g':
- /* Print as unsigned value, must fit completely in unsigned long */
- {
- unsigned long temp = val_long;
- if (temp != val_long)
- {
- /* Urk, can't represent value in long so print in hex.
- Do shift in two operations so that if sizeof (long)
- == sizeof (LONGEST) we can avoid warnings from
- picky compilers about shifts >= the size of the
- shiftee in bits */
- unsigned long vbot = (unsigned long) val_long;
- LONGEST temp = (val_long >> (sizeof (long) * HOST_CHAR_BIT - 1));
- unsigned long vtop = temp >> 1;
- fprintf_filtered (stream, "0x%lx%08lx", vtop, vbot);
- return;
- }
- break;
- }
- }
- }
-#endif
-
-#if defined (CC_HAS_LONG_LONG) && defined (PRINTF_HAS_LONG_LONG)
- switch (format)
- {
- case 'd':
- fprintf_filtered (stream,
- use_local ? local_decimal_format_custom ("ll")
- : "%lld",
- val_long);
- break;
- case 'u':
- fprintf_filtered (stream, "%llu", val_long);
- break;
- case 'x':
- fprintf_filtered (stream,
- use_local ? local_hex_format_custom ("ll")
- : "%llx",
- val_long);
- break;
- case 'o':
- fprintf_filtered (stream,
- use_local ? local_octal_format_custom ("ll")
- : "%llo",
- val_long);
- break;
- case 'b':
- fprintf_filtered (stream, local_hex_format_custom ("02ll"), val_long);
- break;
- case 'h':
- fprintf_filtered (stream, local_hex_format_custom ("04ll"), val_long);
- break;
- case 'w':
- fprintf_filtered (stream, local_hex_format_custom ("08ll"), val_long);
- break;
- case 'g':
- fprintf_filtered (stream, local_hex_format_custom ("016ll"), val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#else /* !CC_HAS_LONG_LONG || !PRINTF_HAS_LONG_LONG */
- /* In the following it is important to coerce (val_long) to a long. It does
- nothing if !LONG_LONG, but it will chop off the top half (which we know
- we can ignore) if the host supports long longs. */
-
- switch (format)
- {
- case 'd':
- fprintf_filtered (stream,
- use_local ? local_decimal_format_custom ("l")
- : "%ld",
- (long) val_long);
- break;
- case 'u':
- fprintf_filtered (stream, "%lu", (unsigned long) val_long);
- break;
- case 'x':
- fprintf_filtered (stream,
- use_local ? local_hex_format_custom ("l")
- : "%lx",
- (unsigned long) val_long);
- break;
- case 'o':
- fprintf_filtered (stream,
- use_local ? local_octal_format_custom ("l")
- : "%lo",
- (unsigned long) val_long);
- break;
- case 'b':
- fprintf_filtered (stream, local_hex_format_custom ("02l"),
- (unsigned long) val_long);
- break;
- case 'h':
- fprintf_filtered (stream, local_hex_format_custom ("04l"),
- (unsigned long) val_long);
- break;
- case 'w':
- fprintf_filtered (stream, local_hex_format_custom ("08l"),
- (unsigned long) val_long);
- break;
- case 'g':
- fprintf_filtered (stream, local_hex_format_custom ("016l"),
- (unsigned long) val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#endif /* CC_HAS_LONG_LONG || PRINTF_HAS_LONG_LONG */
-}
-
-#if 0
-void
-strcat_longest (int format, int use_local, LONGEST val_long, char *buf,
- int buflen)
-{
-/* FIXME: Use buflen to avoid buffer overflow. */
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
- long vtop, vbot;
-
- vtop = val_long >> (sizeof (long) * HOST_CHAR_BIT);
- vbot = (long) val_long;
-
- if ((format == 'd' && (val_long < INT_MIN || val_long > INT_MAX))
- || ((format == 'u' || format == 'x') && (unsigned long long) val_long > UINT_MAX))
- {
- sprintf (buf, "0x%lx%08lx", vtop, vbot);
- return;
- }
-#endif
+ const char *val;
-#ifdef PRINTF_HAS_LONG_LONG
switch (format)
{
case 'd':
- sprintf (buf,
- (use_local ? local_decimal_format_custom ("ll") : "%lld"),
- val_long);
- break;
+ val = int_string (val_long, 10, 1, 0, 1); break;
case 'u':
- sprintf (buf, "%llu", val_long);
- break;
+ val = int_string (val_long, 10, 0, 0, 1); break;
case 'x':
- sprintf (buf,
- (use_local ? local_hex_format_custom ("ll") : "%llx"),
-
- val_long);
- break;
- case 'o':
- sprintf (buf,
- (use_local ? local_octal_format_custom ("ll") : "%llo"),
- val_long);
- break;
+ val = int_string (val_long, 16, 0, 0, use_c_format); break;
case 'b':
- sprintf (buf, local_hex_format_custom ("02ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 2, 1); break;
case 'h':
- sprintf (buf, local_hex_format_custom ("04ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 4, 1); break;
case 'w':
- sprintf (buf, local_hex_format_custom ("08ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 8, 1); break;
case 'g':
- sprintf (buf, local_hex_format_custom ("016ll"), val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#else /* !PRINTF_HAS_LONG_LONG */
- /* In the following it is important to coerce (val_long) to a long. It does
- nothing if !LONG_LONG, but it will chop off the top half (which we know
- we can ignore) if the host supports long longs. */
-
- switch (format)
- {
- case 'd':
- sprintf (buf, (use_local ? local_decimal_format_custom ("l") : "%ld"),
- ((long) val_long));
- break;
- case 'u':
- sprintf (buf, "%lu", ((unsigned long) val_long));
- break;
- case 'x':
- sprintf (buf, (use_local ? local_hex_format_custom ("l") : "%lx"),
- ((long) val_long));
+ val = int_string (val_long, 16, 0, 16, 1); break;
break;
case 'o':
- sprintf (buf, (use_local ? local_octal_format_custom ("l") : "%lo"),
- ((long) val_long));
- break;
- case 'b':
- sprintf (buf, local_hex_format_custom ("02l"),
- ((long) val_long));
- break;
- case 'h':
- sprintf (buf, local_hex_format_custom ("04l"),
- ((long) val_long));
- break;
- case 'w':
- sprintf (buf, local_hex_format_custom ("08l"),
- ((long) val_long));
- break;
- case 'g':
- sprintf (buf, local_hex_format_custom ("016l"),
- ((long) val_long));
- break;
+ val = int_string (val_long, 8, 0, 0, use_c_format); break;
default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-
-#endif /* !PRINTF_HAS_LONG_LONG */
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
+ }
+ fputs_filtered (val, stream);
}
-#endif
/* This used to be a macro, but I don't think it is called often enough
to merit such treatment. */
{
if (rtnval != arg)
{
- error ("Value out of range.");
+ error (_("Value out of range."));
}
}
return (rtnval);
}
-/* Print a floating point value of type TYPE, pointed to in GDB by
- VALADDR, on STREAM. */
+/* Print a floating point value of type TYPE (not always a
+ TYPE_CODE_FLT), pointed to in GDB by VALADDR, on STREAM. */
void
-print_floating (char *valaddr, struct type *type, struct ui_file *stream)
+print_floating (const bfd_byte *valaddr, struct type *type,
+ struct ui_file *stream)
{
DOUBLEST doub;
int inv;
- const struct floatformat *fmt = &floatformat_unknown;
+ const struct floatformat *fmt = NULL;
unsigned len = TYPE_LENGTH (type);
- /* FIXME: kettenis/2001-01-20: The check for IEEE_FLOAT is probably
- still necessary since GDB by default assumes that the target uses
- the IEEE 754 representation for its floats and doubles. Of
- course this is all crock and should be cleaned up. */
-
- if (len == TARGET_FLOAT_BIT / TARGET_CHAR_BIT && IEEE_FLOAT)
- fmt = TARGET_FLOAT_FORMAT;
- else if (len == TARGET_DOUBLE_BIT / TARGET_CHAR_BIT && IEEE_FLOAT)
- fmt = TARGET_DOUBLE_FORMAT;
- else if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT)
- fmt = TARGET_LONG_DOUBLE_FORMAT;
-
- if (floatformat_is_nan (fmt, valaddr))
+ /* If it is a floating-point, check for obvious problems. */
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+ fmt = floatformat_from_type (type);
+ if (fmt != NULL && floatformat_is_nan (fmt, valaddr))
{
if (floatformat_is_negative (fmt, valaddr))
fprintf_filtered (stream, "-");
fprintf_filtered (stream, "nan(");
- fprintf_filtered (stream, local_hex_format_prefix ());
- fprintf_filtered (stream, floatformat_mantissa (fmt, valaddr));
- fprintf_filtered (stream, local_hex_format_suffix ());
+ fputs_filtered ("0x", stream);
+ fputs_filtered (floatformat_mantissa (fmt, valaddr), stream);
fprintf_filtered (stream, ")");
return;
}
+ /* NOTE: cagney/2002-01-15: The TYPE passed into print_floating()
+ isn't necessarily a TYPE_CODE_FLT. Consequently, unpack_double
+ needs to be used as that takes care of any necessary type
+ conversions. Such conversions are of course direct to DOUBLEST
+ and disregard any possible target floating point limitations.
+ For instance, a u64 would be converted and displayed exactly on a
+ host with 80 bit DOUBLEST but with loss of information on a host
+ with 64 bit DOUBLEST. */
+
doub = unpack_double (type, valaddr, &inv);
if (inv)
{
/* FIXME: kettenis/2001-01-20: The following code makes too much
assumptions about the host and target floating point format. */
+ /* NOTE: cagney/2002-02-03: Since the TYPE of what was passed in may
+ not necessarially be a TYPE_CODE_FLT, the below ignores that and
+ instead uses the type's length to determine the precision of the
+ floating-point value being printed. */
+
if (len < sizeof (double))
fprintf_filtered (stream, "%.9g", (double) doub);
else if (len == sizeof (double))
}
void
-print_binary_chars (struct ui_file *stream, unsigned char *valaddr,
+print_binary_chars (struct ui_file *stream, const bfd_byte *valaddr,
unsigned len)
{
#define BITS_IN_BYTES 8
- unsigned char *p;
+ const bfd_byte *p;
unsigned int i;
int b;
/* FIXME: We should be not printing leading zeroes in most cases. */
- fprintf_filtered (stream, local_binary_format_prefix ());
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
p < valaddr + len;
}
}
}
- fprintf_filtered (stream, local_binary_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes.
* Print it in octal on stream or format it in buf.
*/
void
-print_octal_chars (struct ui_file *stream, unsigned char *valaddr, unsigned len)
+print_octal_chars (struct ui_file *stream, const bfd_byte *valaddr,
+ unsigned len)
{
- unsigned char *p;
+ const bfd_byte *p;
unsigned char octa1, octa2, octa3, carry;
int cycle;
cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
carry = 0;
- fprintf_filtered (stream, local_octal_format_prefix ());
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ fputs_filtered ("0", stream);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
p < valaddr + len;
break;
default:
- error ("Internal error in octal conversion;");
+ error (_("Internal error in octal conversion;"));
}
cycle++;
break;
default:
- error ("Internal error in octal conversion;");
+ error (_("Internal error in octal conversion;"));
}
cycle++;
}
}
- fprintf_filtered (stream, local_octal_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes.
* Print it in decimal on stream or format it in buf.
*/
void
-print_decimal_chars (struct ui_file *stream, unsigned char *valaddr,
+print_decimal_chars (struct ui_file *stream, const bfd_byte *valaddr,
unsigned len)
{
#define TEN 10
#define CARRY_LEFT( x ) ((x) % TEN)
#define SHIFT( x ) ((x) << 4)
#define START_P \
- ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? valaddr : valaddr + len - 1)
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? valaddr : valaddr + len - 1)
#define NOT_END_P \
- ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? (p < valaddr + len) : (p >= valaddr))
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? (p < valaddr + len) : (p >= valaddr))
#define NEXT_P \
- ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? p++ : p-- )
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? p++ : p-- )
#define LOW_NIBBLE( x ) ( (x) & 0x00F)
#define HIGH_NIBBLE( x ) (((x) & 0x0F0) >> 4)
- unsigned char *p;
+ const bfd_byte *p;
unsigned char *digits;
int carry;
int decimal_len;
digits[i] = 0;
}
- fprintf_filtered (stream, local_decimal_format_prefix ());
-
/* Ok, we have an unknown number of bytes of data to be printed in
* decimal.
*
fprintf_filtered (stream, "%1d", digits[i]);
}
xfree (digits);
-
- fprintf_filtered (stream, local_decimal_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes. Print it in hex on stream. */
-static void
-print_hex_chars (struct ui_file *stream, unsigned char *valaddr, unsigned len)
+void
+print_hex_chars (struct ui_file *stream, const bfd_byte *valaddr,
+ unsigned len)
{
- unsigned char *p;
+ const bfd_byte *p;
/* FIXME: We should be not printing leading zeroes in most cases. */
- fprintf_filtered (stream, local_hex_format_prefix ());
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ fputs_filtered ("0x", stream);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
p < valaddr + len;
fprintf_filtered (stream, "%02x", *p);
}
}
- fprintf_filtered (stream, local_hex_format_suffix ());
+}
+
+/* VALADDR points to a char integer of LEN bytes. Print it out in appropriate language form on stream.
+ Omit any leading zero chars. */
+
+void
+print_char_chars (struct ui_file *stream, const bfd_byte *valaddr,
+ unsigned len)
+{
+ const bfd_byte *p;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ p = valaddr;
+ while (p < valaddr + len - 1 && *p == 0)
+ ++p;
+
+ while (p < valaddr + len)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ ++p;
+ }
+ }
+ else
+ {
+ p = valaddr + len - 1;
+ while (p > valaddr && *p == 0)
+ --p;
+
+ while (p >= valaddr)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ --p;
+ }
+ }
}
/* Called by various <lang>_val_print routines to print elements of an
*/
void
-val_print_array_elements (struct type *type, char *valaddr, CORE_ADDR address,
- struct ui_file *stream, int format, int deref_ref,
+val_print_array_elements (struct type *type, const bfd_byte *valaddr,
+ CORE_ADDR address, struct ui_file *stream,
+ int format, int deref_ref,
int recurse, enum val_prettyprint pretty,
unsigned int i)
{
if (errcode == EIO)
{
fprintf_filtered (stream, " <Address ");
- print_address_numeric (addr, 1, stream);
+ deprecated_print_address_numeric (addr, 1, stream);
fprintf_filtered (stream, " out of bounds>");
}
else
{
fprintf_filtered (stream, " <Error reading address ");
- print_address_numeric (addr, 1, stream);
+ deprecated_print_address_numeric (addr, 1, stream);
fprintf_filtered (stream, ": %s>", safe_strerror (errcode));
}
}
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
-/* ARGSUSED */
static void
set_input_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- set_input_radix_1 (from_tty, *(unsigned *) c->var);
+ set_input_radix_1 (from_tty, input_radix);
}
-/* ARGSUSED */
static void
set_input_radix_1 (int from_tty, unsigned radix)
{
if (radix < 2)
{
- error ("Nonsense input radix ``decimal %u''; input radix unchanged.",
+ /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
+ value. */
+ error (_("Nonsense input radix ``decimal %u''; input radix unchanged."),
radix);
}
input_radix = radix;
if (from_tty)
{
- printf_filtered ("Input radix now set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Input radix now set to decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
-/* ARGSUSED */
static void
set_output_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- set_output_radix_1 (from_tty, *(unsigned *) c->var);
+ set_output_radix_1 (from_tty, output_radix);
}
static void
output_format = 'o'; /* octal */
break;
default:
- error ("Unsupported output radix ``decimal %u''; output radix unchanged.",
+ /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
+ value. */
+ error (_("Unsupported output radix ``decimal %u''; output radix unchanged."),
radix);
}
output_radix = radix;
if (from_tty)
{
- printf_filtered ("Output radix now set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Output radix now set to decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
set_input_radix_1 (0, radix);
if (from_tty)
{
- printf_filtered ("Input and output radices now set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Input and output radices now set to decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
/* Show both the input and output radices. */
-/*ARGSUSED */
static void
show_radix (char *arg, int from_tty)
{
{
if (input_radix == output_radix)
{
- printf_filtered ("Input and output radices set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Input and output radices set to decimal %u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
}
else
{
- printf_filtered ("Input radix set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Input radix set to decimal %u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
- printf_filtered ("Output radix set to decimal %u, hex %x, octal %o.\n",
+ printf_filtered (_("Output radix set to decimal %u, hex %x, octal %o.\n"),
output_radix, output_radix, output_radix);
}
}
}
\f
-/*ARGSUSED */
static void
set_print (char *arg, int from_tty)
{
help_list (setprintlist, "set print ", -1, gdb_stdout);
}
-/*ARGSUSED */
static void
show_print (char *args, int from_tty)
{
struct cmd_list_element *c;
add_prefix_cmd ("print", no_class, set_print,
- "Generic command for setting how things print.",
+ _("Generic command for setting how things print."),
&setprintlist, "set print ", 0, &setlist);
add_alias_cmd ("p", "print", no_class, 1, &setlist);
/* prefer set print to set prompt */
add_alias_cmd ("pr", "print", no_class, 1, &setlist);
add_prefix_cmd ("print", no_class, show_print,
- "Generic command for showing print settings.",
+ _("Generic command for showing print settings."),
&showprintlist, "show print ", 0, &showlist);
add_alias_cmd ("p", "print", no_class, 1, &showlist);
add_alias_cmd ("pr", "print", no_class, 1, &showlist);
- add_show_from_set
- (add_set_cmd ("elements", no_class, var_uinteger, (char *) &print_max,
- "Set limit on string chars or array elements to print.\n\
-\"set print elements 0\" causes there to be no limit.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("null-stop", no_class, var_boolean,
- (char *) &stop_print_at_null,
- "Set printing of char arrays to stop at first null char.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("repeats", no_class, var_uinteger,
- (char *) &repeat_count_threshold,
- "Set threshold for repeated print elements.\n\
-\"set print repeats 0\" causes all elements to be individually printed.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("pretty", class_support, var_boolean,
- (char *) &prettyprint_structs,
- "Set prettyprinting of structures.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("union", class_support, var_boolean, (char *) &unionprint,
- "Set printing of unions interior to structures.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("array", class_support, var_boolean,
- (char *) &prettyprint_arrays,
- "Set prettyprinting of arrays.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("address", class_support, var_boolean, (char *) &addressprint,
- "Set printing of addresses.",
- &setprintlist),
- &showprintlist);
-
- c = add_set_cmd ("input-radix", class_support, var_uinteger,
- (char *) &input_radix,
- "Set default input radix for entering numbers.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_input_radix;
-
- c = add_set_cmd ("output-radix", class_support, var_uinteger,
- (char *) &output_radix,
- "Set default output radix for printing of values.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_output_radix;
-
- /* The "set radix" and "show radix" commands are special in that they are
- like normal set and show commands but allow two normally independent
- variables to be either set or shown with a single command. So the
- usual add_set_cmd() and add_show_from_set() commands aren't really
- appropriate. */
- add_cmd ("radix", class_support, set_radix,
- "Set default input and output number radices.\n\
+ add_setshow_uinteger_cmd ("elements", no_class, &print_max, _("\
+Set limit on string chars or array elements to print."), _("\
+Show limit on string chars or array elements to print."), _("\
+\"set print elements 0\" causes there to be no limit."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("null-stop", no_class, &stop_print_at_null, _("\
+Set printing of char arrays to stop at first null char."), _("\
+Show printing of char arrays to stop at first null char."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_uinteger_cmd ("repeats", no_class,
+ &repeat_count_threshold, _("\
+Set threshold for repeated print elements."), _("\
+Show threshold for repeated print elements."), _("\
+\"set print repeats 0\" causes all elements to be individually printed."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("pretty", class_support, &prettyprint_structs, _("\
+Set prettyprinting of structures."), _("\
+Show prettyprinting of structures."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("union", class_support, &unionprint, _("\
+Set printing of unions interior to structures."), _("\
+Show printing of unions interior to structures."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("array", class_support, &prettyprint_arrays, _("\
+Set prettyprinting of arrays."), _("\
+Show prettyprinting of arrays."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("address", class_support, &addressprint, _("\
+Set printing of addresses."), _("\
+Show printing of addresses."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setprintlist, &showprintlist);
+
+ add_setshow_uinteger_cmd ("input-radix", class_support, &input_radix, _("\
+Set default input radix for entering numbers."), _("\
+Show default input radix for entering numbers."), NULL,
+ set_input_radix,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_uinteger_cmd ("output-radix", class_support, &output_radix, _("\
+Set default output radix for printing of values."), _("\
+Show default output radix for printing of values."), NULL,
+ set_output_radix,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ /* The "set radix" and "show radix" commands are special in that
+ they are like normal set and show commands but allow two normally
+ independent variables to be either set or shown with a single
+ command. So the usual deprecated_add_set_cmd() and [deleted]
+ add_show_from_set() commands aren't really appropriate. */
+ /* FIXME: i18n: With the new add_setshow_integer command, that is no
+ longer true - show can display anything. */
+ add_cmd ("radix", class_support, set_radix, _("\
+Set default input and output number radices.\n\
Use 'set input-radix' or 'set output-radix' to independently set each.\n\
-Without an argument, sets both radices back to the default value of 10.",
+Without an argument, sets both radices back to the default value of 10."),
&setlist);
- add_cmd ("radix", class_support, show_radix,
- "Show the default input and output number radices.\n\
-Use 'show input-radix' or 'show output-radix' to independently show each.",
+ add_cmd ("radix", class_support, show_radix, _("\
+Show the default input and output number radices.\n\
+Use 'show input-radix' or 'show output-radix' to independently show each."),
&showlist);
/* Give people the defaults which they are used to. */
projects / deliverable / binutils-gdb.git / blobdiff