/* Print values for GDB, the GNU debugger.
Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
#include "doublest.h"
#include "exceptions.h"
#include "dfp.h"
+#include "python/python.h"
+#include "ada-lang.h"
#include <errno.h>
void _initialize_valprint (void);
-#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
+#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
struct value_print_options user_print_options =
{
0, /* print_array_indexes */
0, /* deref_ref */
1, /* static_field_print */
- 1 /* pascal_static_field_print */
+ 1, /* pascal_static_field_print */
+ 0, /* raw */
+ 0 /* summary */
};
/* Initialize *OPTS to be a copy of the user print options. */
show_print_max (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Limit on string chars or array elements to print is %s.\n"),
+ fprintf_filtered (file,
+ _("Limit on string chars or array "
+ "elements to print is %s.\n"),
value);
}
show_input_radix (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Default input radix for entering numbers is %s.\n"),
+ fprintf_filtered (file,
+ _("Default input radix for entering numbers is %s.\n"),
value);
}
show_output_radix (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Default output radix for printing of values is %s.\n"),
+ fprintf_filtered (file,
+ _("Default output radix for printing of values is %s.\n"),
value);
}
/* Print repeat counts if there are more than this many repetitions of an
element in an array. Referenced by the low level language dependent
- print routines. */
+ print routines. */
static void
show_repeat_count_threshold (struct ui_file *file, int from_tty,
value);
}
-/* If nonzero, stops printing of char arrays at first null. */
+/* If nonzero, stops printing of char arrays at first null. */
static void
show_stop_print_at_null (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Printing of char arrays to stop at first null char is %s.\n"),
+ fprintf_filtered (file,
+ _("Printing of char arrays to stop "
+ "at first null char is %s.\n"),
value);
}
-/* Controls pretty printing of structures. */
+/* Controls pretty printing of structures. */
static void
show_prettyprint_structs (struct ui_file *file, int from_tty,
}
/* If nonzero, causes unions inside structures or other unions to be
- printed. */
+ printed. */
static void
show_unionprint (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Printing of unions interior to structures is %s.\n"),
+ fprintf_filtered (file,
+ _("Printing of unions interior to structures is %s.\n"),
value);
}
-/* If nonzero, causes machine addresses to be printed in certain contexts. */
+/* If nonzero, causes machine addresses to be printed in certain contexts. */
static void
show_addressprint (struct ui_file *file, int from_tty,
}
\f
-/* Print using the given LANGUAGE the data of type TYPE located at VALADDR
- (within GDB), which came from the inferior at address ADDRESS, onto
- stdio stream STREAM according to OPTIONS.
+/* A helper function for val_print. When printing in "summary" mode,
+ we want to print scalar arguments, but not aggregate arguments.
+ This function distinguishes between the two. */
- If the data are a string pointer, returns the number of string characters
- printed.
+static int
+scalar_type_p (struct type *type)
+{
+ CHECK_TYPEDEF (type);
+ while (TYPE_CODE (type) == TYPE_CODE_REF)
+ {
+ type = TYPE_TARGET_TYPE (type);
+ CHECK_TYPEDEF (type);
+ }
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_ARRAY:
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ case TYPE_CODE_SET:
+ case TYPE_CODE_STRING:
+ case TYPE_CODE_BITSTRING:
+ return 0;
+ default:
+ return 1;
+ }
+}
+
+/* Helper function to check the validity of some bits of a value.
+
+ If TYPE represents some aggregate type (e.g., a structure), return 1.
+
+ Otherwise, any of the bytes starting at OFFSET and extending for
+ TYPE_LENGTH(TYPE) bytes are invalid, print a message to STREAM and
+ return 0. The checking is done using FUNCS.
+
+ Otherwise, return 1. */
+
+static int
+valprint_check_validity (struct ui_file *stream,
+ struct type *type,
+ int embedded_offset,
+ const struct value *val)
+{
+ CHECK_TYPEDEF (type);
+
+ if (TYPE_CODE (type) != TYPE_CODE_UNION
+ && TYPE_CODE (type) != TYPE_CODE_STRUCT
+ && TYPE_CODE (type) != TYPE_CODE_ARRAY)
+ {
+ if (!value_bits_valid (val, TARGET_CHAR_BIT * embedded_offset,
+ TARGET_CHAR_BIT * TYPE_LENGTH (type)))
+ {
+ val_print_optimized_out (stream);
+ return 0;
+ }
- FIXME: The data at VALADDR is in target byte order. If gdb is ever
- enhanced to be able to debug more than the single target it was compiled
- for (specific CPU type and thus specific target byte ordering), then
- either the print routines are going to have to take this into account,
- or the data is going to have to be passed into here already converted
- to the host byte ordering, whichever is more convenient. */
+ if (value_bits_synthetic_pointer (val, TARGET_CHAR_BIT * embedded_offset,
+ TARGET_CHAR_BIT * TYPE_LENGTH (type)))
+ {
+ fputs_filtered (_("<synthetic pointer>"), stream);
+ return 0;
+ }
+
+ if (!value_bytes_available (val, embedded_offset, TYPE_LENGTH (type)))
+ {
+ val_print_unavailable (stream);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+void
+val_print_optimized_out (struct ui_file *stream)
+{
+ fprintf_filtered (stream, _("<optimized out>"));
+}
+
+void
+val_print_unavailable (struct ui_file *stream)
+{
+ fprintf_filtered (stream, _("<unavailable>"));
+}
+
+void
+val_print_invalid_address (struct ui_file *stream)
+{
+ fprintf_filtered (stream, _("<invalid address>"));
+}
+/* Print using the given LANGUAGE the data of type TYPE located at
+ VALADDR + EMBEDDED_OFFSET (within GDB), which came from the
+ inferior at address ADDRESS + EMBEDDED_OFFSET, onto stdio stream
+ STREAM according to OPTIONS. VAL is the whole object that came
+ from ADDRESS. VALADDR must point to the head of VAL's contents
+ buffer.
+
+ The language printers will pass down an adjusted EMBEDDED_OFFSET to
+ further helper subroutines as subfields of TYPE are printed. In
+ such cases, VALADDR is passed down unadjusted, as well as VAL, so
+ that VAL can be queried for metadata about the contents data being
+ printed, using EMBEDDED_OFFSET as an offset into VAL's contents
+ buffer. For example: "has this field been optimized out", or "I'm
+ printing an object while inspecting a traceframe; has this
+ particular piece of data been collected?".
+
+ RECURSE indicates the amount of indentation to supply before
+ continuation lines; this amount is roughly twice the value of
+ RECURSE.
+
+ If the data is printed as a string, returns the number of string
+ characters printed. */
int
val_print (struct type *type, const gdb_byte *valaddr, int embedded_offset,
CORE_ADDR address, struct ui_file *stream, int recurse,
+ const struct value *val,
const struct value_print_options *options,
const struct language_defn *language)
{
if (TYPE_STUB (real_type))
{
- fprintf_filtered (stream, "<incomplete type>");
+ fprintf_filtered (stream, _("<incomplete type>"));
gdb_flush (stream);
return (0);
}
+ if (!valprint_check_validity (stream, real_type, embedded_offset, val))
+ return 0;
+
+ if (!options->raw)
+ {
+ ret = apply_val_pretty_printer (type, valaddr, embedded_offset,
+ address, stream, recurse,
+ val, options, language);
+ if (ret)
+ return ret;
+ }
+
+ /* Handle summary mode. If the value is a scalar, print it;
+ otherwise, print an ellipsis. */
+ if (options->summary && !scalar_type_p (type))
+ {
+ fprintf_filtered (stream, "...");
+ return 0;
+ }
+
TRY_CATCH (except, RETURN_MASK_ERROR)
{
ret = language->la_val_print (type, valaddr, embedded_offset, address,
- stream, recurse, &local_opts);
+ stream, recurse, val,
+ &local_opts);
}
if (except.reason < 0)
fprintf_filtered (stream, _("<error reading variable>"));
return 0;
}
- if (value_optimized_out (val))
+ if (value_entirely_optimized_out (val))
{
- fprintf_filtered (stream, _("<value optimized out>"));
+ val_print_optimized_out (stream);
+ return 0;
+ }
+
+ if (TYPE_CODE (value_type (val)) == TYPE_CODE_INTERNAL_FUNCTION)
+ {
+ fprintf_filtered (stream, _("<internal function %s>"),
+ value_internal_function_name (val));
return 0;
}
if (!value_check_printable (val, stream))
return 0;
- return val_print (value_type (val), value_contents_all (val),
- value_embedded_offset (val), VALUE_ADDRESS (val),
- stream, recurse, options, language);
+ if (language->la_language == language_ada)
+ /* The value might have a dynamic type, which would cause trouble
+ below when trying to extract the value contents (since the value
+ size is determined from the type size which is unknown). So
+ get a fixed representation of our value. */
+ val = ada_to_fixed_value (val);
+
+ return val_print (value_type (val), value_contents_for_printing (val),
+ value_embedded_offset (val), value_address (val),
+ stream, recurse,
+ val, options, language);
}
-/* Print the value VAL in C-ish syntax on stream STREAM according to
- OPTIONS.
- If the object printed is a string pointer, returns
- the number of string bytes printed. */
+/* Print on stream STREAM the value VAL according to OPTIONS. The value
+ is printed using the current_language syntax.
+
+ If the object printed is a string pointer, return the number of string
+ bytes printed. */
int
value_print (struct value *val, struct ui_file *stream,
if (!value_check_printable (val, stream))
return 0;
+ if (!options->raw)
+ {
+ int r = apply_val_pretty_printer (value_type (val),
+ value_contents_for_printing (val),
+ value_embedded_offset (val),
+ value_address (val),
+ stream, 0,
+ val, options, current_language);
+
+ if (r)
+ return r;
+ }
+
return LA_VALUE_PRINT (val, stream, options);
}
val_print_type_code_int (struct type *type, const gdb_byte *valaddr,
struct ui_file *stream)
{
- enum bfd_endian byte_order = gdbarch_byte_order (current_gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (get_type_arch (type));
if (TYPE_LENGTH (type) > sizeof (LONGEST))
{
if (TYPE_UNSIGNED (type)
&& extract_long_unsigned_integer (valaddr, TYPE_LENGTH (type),
- &val))
+ byte_order, &val))
{
print_longest (stream, 'u', 0, val);
}
}
}
fputs_filtered ("]", stream);
+
+/* Print a scalar of data of type TYPE, pointed to in GDB by VALADDR,
+ according to OPTIONS and SIZE on STREAM. Format i is not supported
+ at this level.
+
+ This is how the elements of an array or structure are printed
+ with a format. */
+}
+
+void
+val_print_scalar_formatted (struct type *type,
+ const gdb_byte *valaddr, int embedded_offset,
+ const struct value *val,
+ const struct value_print_options *options,
+ int size,
+ struct ui_file *stream)
+{
+ gdb_assert (val != NULL);
+ gdb_assert (valaddr == value_contents_for_printing_const (val));
+
+ /* If we get here with a string format, try again without it. Go
+ all the way back to the language printers, which may call us
+ again. */
+ if (options->format == 's')
+ {
+ struct value_print_options opts = *options;
+ opts.format = 0;
+ opts.deref_ref = 0;
+ val_print (type, valaddr, embedded_offset, 0, stream, 0, val, &opts,
+ current_language);
+ return;
+ }
+
+ /* A scalar object that does not have all bits available can't be
+ printed, because all bits contribute to its representation. */
+ if (!value_bits_valid (val, TARGET_CHAR_BIT * embedded_offset,
+ TARGET_CHAR_BIT * TYPE_LENGTH (type)))
+ val_print_optimized_out (stream);
+ else if (!value_bytes_available (val, embedded_offset, TYPE_LENGTH (type)))
+ val_print_unavailable (stream);
+ else
+ print_scalar_formatted (valaddr + embedded_offset, type,
+ options, size, stream);
}
/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
The raison d'etre of this function is to consolidate printing of
- LONG_LONG's into this one function. The format chars b,h,w,g are
+ LONG_LONG's into this one function. The format chars b,h,w,g are
from print_scalar_formatted(). Numbers are printed using C
- format.
+ format.
USE_C_FORMAT means to use C format in all cases. Without it,
'o' and 'x' format do not include the standard C radix prefix
the integer is a protocol thing, not a user-visible thing). The
parameter remains to preserve the information of what things might
be printed with language-specific format, should we ever resurrect
- that capability. */
+ that capability. */
void
print_longest (struct ui_file *stream, int format, int use_c_format,
case 'o':
val = int_string (val_long, 8, 0, 0, use_c_format); break;
default:
- internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
}
fputs_filtered (val, stream);
}
int
longest_to_int (LONGEST arg)
{
- /* Let the compiler do the work */
+ /* Let the compiler do the work. */
int rtnval = (int) arg;
- /* Check for overflows or underflows */
+ /* Check for overflows or underflows. */
if (sizeof (LONGEST) > sizeof (int))
{
if (rtnval != arg)
print_decimal_floating (const gdb_byte *valaddr, struct type *type,
struct ui_file *stream)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (get_type_arch (type));
char decstr[MAX_DECIMAL_STRING];
unsigned len = TYPE_LENGTH (type);
- decimal_to_string (valaddr, len, decstr);
+ decimal_to_string (valaddr, len, byte_order, decstr);
fputs_filtered (decstr, stream);
return;
}
int b;
/* Declared "int" so it will be signed.
- * This ensures that right shift will shift in zeros.
- */
+ This ensures that right shift will shift in zeros. */
+
const int mask = 0x080;
/* FIXME: We should be not printing leading zeroes in most cases. */
p++)
{
/* Every byte has 8 binary characters; peel off
- * and print from the MSB end.
- */
+ and print from the MSB end. */
+
for (i = 0; i < (BITS_IN_BYTES * sizeof (*p)); i++)
{
if (*p & (mask >> i))
}
/* VALADDR points to an integer of LEN bytes.
- * Print it in octal on stream or format it in buf.
- */
+ Print it in octal on stream or format it in buf. */
+
void
print_octal_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len, enum bfd_endian byte_order)
#define LOW_TWO 0007
/* For 32 we start in cycle 2, with two bits and one bit carry;
- * for 64 in cycle in cycle 1, with one bit and a two bit carry.
- */
+ for 64 in cycle in cycle 1, with one bit and a two bit carry. */
+
cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
carry = 0;
switch (cycle)
{
case 0:
- /* No carry in, carry out two bits.
- */
+ /* No carry in, carry out two bits. */
+
octa1 = (HIGH_ZERO & *p) >> 5;
octa2 = (LOW_ZERO & *p) >> 2;
carry = (CARRY_ZERO & *p);
break;
case 1:
- /* Carry in two bits, carry out one bit.
- */
+ /* Carry in two bits, carry out one bit. */
+
octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
octa2 = (MID_ONE & *p) >> 4;
octa3 = (LOW_ONE & *p) >> 1;
break;
case 2:
- /* Carry in one bit, no carry out.
- */
+ /* Carry in one bit, no carry out. */
+
octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
octa2 = (MID_TWO & *p) >> 3;
octa3 = (LOW_TWO & *p);
{
case 0:
/* Carry out, no carry in */
+
octa1 = (HIGH_ZERO & *p) >> 5;
octa2 = (LOW_ZERO & *p) >> 2;
carry = (CARRY_ZERO & *p);
case 1:
/* Carry in, carry out */
+
octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
octa2 = (MID_ONE & *p) >> 4;
octa3 = (LOW_ONE & *p) >> 1;
case 2:
/* Carry in, no carry out */
+
octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
octa2 = (MID_TWO & *p) >> 3;
octa3 = (LOW_TWO & *p);
}
/* VALADDR points to an integer of LEN bytes.
- * Print it in decimal on stream or format it in buf.
- */
+ Print it in decimal on stream or format it in buf. */
+
void
print_decimal_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len, enum bfd_endian byte_order)
int flip;
/* Base-ten number is less than twice as many digits
- * as the base 16 number, which is 2 digits per byte.
- */
+ as the base 16 number, which is 2 digits per byte. */
+
decimal_len = len * 2 * 2;
digits = xmalloc (decimal_len);
* the nibbles by 16, add Y and re-decimalize. Repeat with Z.
*
* The trick is that "digits" holds a base-10 number, but sometimes
- * the individual digits are > 10.
+ * the individual digits are > 10.
*
* Outer loop is per nibble (hex digit) of input, from MSD end to
* LSD end.
*/
if (flip == 0)
{
- /* Take top nibble.
- */
+ /* Take top nibble. */
+
digits[0] += HIGH_NIBBLE (*p);
flip = 1;
}
else
{
- /* Take low nibble and bump our pointer "p".
- */
+ /* Take low nibble and bump our pointer "p". */
+
digits[0] += LOW_NIBBLE (*p);
if (byte_order == BFD_ENDIAN_BIG)
p++;
}
/* Ok, now "digits" is the decimal representation, with
- * the "decimal_digits" actual digits. Print!
- */
+ the "decimal_digits" actual digits. Print! */
+
for (i = decimal_digits - 1; i >= 0; i--)
{
fprintf_filtered (stream, "%1d", digits[i]);
}
}
-/* VALADDR points to a char integer of LEN bytes. Print it out in appropriate language form on stream.
+/* VALADDR points to a char integer of LEN bytes.
+ Print it out in appropriate language form on stream.
Omit any leading zero chars. */
void
-print_char_chars (struct ui_file *stream, const gdb_byte *valaddr,
+print_char_chars (struct ui_file *stream, struct type *type,
+ const gdb_byte *valaddr,
unsigned len, enum bfd_endian byte_order)
{
const gdb_byte *p;
while (p < valaddr + len)
{
- LA_EMIT_CHAR (*p, stream, '\'');
+ LA_EMIT_CHAR (*p, type, stream, '\'');
++p;
}
}
while (p >= valaddr)
{
- LA_EMIT_CHAR (*p, stream, '\'');
+ LA_EMIT_CHAR (*p, type, stream, '\'');
--p;
}
}
}
-/* Assuming TYPE is a simple, non-empty array type, compute its upper
- and lower bound. Save the low bound into LOW_BOUND if not NULL.
- Save the high bound into HIGH_BOUND if not NULL.
-
- Return 1 if the operation was successful. Return zero otherwise,
- in which case the values of LOW_BOUND and HIGH_BOUNDS are unmodified.
-
- Computing the array upper and lower bounds is pretty easy, but this
- function does some additional verifications before returning them.
- If something incorrect is detected, it is better to return a status
- rather than throwing an error, making it easier for the caller to
- implement an error-recovery plan. For instance, it may decide to
- warn the user that the bounds were not found and then use some
- default values instead. */
-
-int
-get_array_bounds (struct type *type, long *low_bound, long *high_bound)
-{
- struct type *index = TYPE_INDEX_TYPE (type);
- long low = 0;
- long high = 0;
-
- if (index == NULL)
- return 0;
-
- if (TYPE_CODE (index) == TYPE_CODE_RANGE)
- {
- low = TYPE_LOW_BOUND (index);
- high = TYPE_HIGH_BOUND (index);
- }
- else if (TYPE_CODE (index) == TYPE_CODE_ENUM)
- {
- const int n_enums = TYPE_NFIELDS (index);
-
- low = TYPE_FIELD_BITPOS (index, 0);
- high = TYPE_FIELD_BITPOS (index, n_enums - 1);
- }
- else
- return 0;
-
- /* Abort if the lower bound is greater than the higher bound, except
- when low = high + 1. This is a very common idiom used in Ada when
- defining empty ranges (for instance "range 1 .. 0"). */
- if (low > high + 1)
- return 0;
-
- if (low_bound)
- *low_bound = low;
-
- if (high_bound)
- *high_bound = high;
-
- return 1;
-}
-
/* Print on STREAM using the given OPTIONS the index for the element
at INDEX of an array whose index type is INDEX_TYPE. */
(FIXME?) Assumes array element separator is a comma, which is correct
for all languages currently handled.
(FIXME?) Some languages have a notation for repeated array elements,
- perhaps we should try to use that notation when appropriate.
- */
+ perhaps we should try to use that notation when appropriate. */
void
-val_print_array_elements (struct type *type, const gdb_byte *valaddr,
+val_print_array_elements (struct type *type,
+ const gdb_byte *valaddr, int embedded_offset,
CORE_ADDR address, struct ui_file *stream,
int recurse,
+ const struct value *val,
const struct value_print_options *options,
unsigned int i)
{
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
- long low_bound_index = 0;
+ LONGEST low_bound, high_bound;
elttype = TYPE_TARGET_TYPE (type);
eltlen = TYPE_LENGTH (check_typedef (elttype));
index_type = TYPE_INDEX_TYPE (type);
- /* Compute the number of elements in the array. On most arrays,
- the size of its elements is not zero, and so the number of elements
- is simply the size of the array divided by the size of the elements.
- But for arrays of elements whose size is zero, we need to look at
- the bounds. */
- if (eltlen != 0)
- len = TYPE_LENGTH (type) / eltlen;
- else
+ if (get_array_bounds (type, &low_bound, &high_bound))
{
- long low, hi;
- if (get_array_bounds (type, &low, &hi))
- len = hi - low + 1;
+ /* The array length should normally be HIGH_BOUND - LOW_BOUND + 1.
+ But we have to be a little extra careful, because some languages
+ such as Ada allow LOW_BOUND to be greater than HIGH_BOUND for
+ empty arrays. In that situation, the array length is just zero,
+ not negative! */
+ if (low_bound > high_bound)
+ len = 0;
else
- {
- warning (_("unable to get bounds of array, assuming null array"));
- len = 0;
- }
+ len = high_bound - low_bound + 1;
}
-
- /* Get the array low bound. This only makes sense if the array
- has one or more element in it. */
- if (len > 0 && !get_array_bounds (type, &low_bound_index, NULL))
+ else
{
- warning (_("unable to get low bound of array, using zero as default"));
- low_bound_index = 0;
+ warning (_("unable to get bounds of array, assuming null array"));
+ low_bound = 0;
+ len = 0;
}
annotate_array_section_begin (i, elttype);
}
}
wrap_here (n_spaces (2 + 2 * recurse));
- maybe_print_array_index (index_type, i + low_bound_index,
+ maybe_print_array_index (index_type, i + low_bound,
stream, options);
rep1 = i + 1;
reps = 1;
- while ((rep1 < len) &&
- !memcmp (valaddr + i * eltlen, valaddr + rep1 * eltlen, eltlen))
+ while (rep1 < len
+ && value_available_contents_eq (val,
+ embedded_offset + i * eltlen,
+ val,
+ embedded_offset + rep1 * eltlen,
+ eltlen))
{
++reps;
++rep1;
if (reps > options->repeat_count_threshold)
{
- val_print (elttype, valaddr + i * eltlen, 0, address + i * eltlen,
- stream, recurse + 1, options, current_language);
+ val_print (elttype, valaddr, embedded_offset + i * eltlen,
+ address, stream, recurse + 1, val, options,
+ current_language);
annotate_elt_rep (reps);
fprintf_filtered (stream, " <repeats %u times>", reps);
annotate_elt_rep_end ();
}
else
{
- val_print (elttype, valaddr + i * eltlen, 0, address + i * eltlen,
- stream, recurse + 1, options, current_language);
+ val_print (elttype, valaddr, embedded_offset + i * eltlen,
+ address,
+ stream, recurse + 1, val, options, current_language);
annotate_elt ();
things_printed++;
}
/* Read LEN bytes of target memory at address MEMADDR, placing the
results in GDB's memory at MYADDR. Returns a count of the bytes
actually read, and optionally an errno value in the location
- pointed to by ERRNOPTR if ERRNOPTR is non-null. */
+ pointed to by ERRNOPTR if ERRNOPTR is non-null. */
/* FIXME: cagney/1999-10-14: Only used by val_print_string. Can this
function be eliminated. */
static int
-partial_memory_read (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int *errnoptr)
+partial_memory_read (CORE_ADDR memaddr, gdb_byte *myaddr,
+ int len, int *errnoptr)
{
- int nread; /* Number of bytes actually read. */
- int errcode; /* Error from last read. */
+ int nread; /* Number of bytes actually read. */
+ int errcode; /* Error from last read. */
- /* First try a complete read. */
+ /* First try a complete read. */
errcode = target_read_memory (memaddr, myaddr, len);
if (errcode == 0)
{
- /* Got it all. */
+ /* Got it all. */
nread = len;
}
else
{
- /* Loop, reading one byte at a time until we get as much as we can. */
+ /* Loop, reading one byte at a time until we get as much as we can. */
for (errcode = 0, nread = 0; len > 0 && errcode == 0; nread++, len--)
{
errcode = target_read_memory (memaddr++, myaddr++, 1);
}
- /* If an error, the last read was unsuccessful, so adjust count. */
+ /* If an error, the last read was unsuccessful, so adjust count. */
if (errcode != 0)
{
nread--;
return (nread);
}
-/* Print a string from the inferior, starting at ADDR and printing up to LEN
- characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
- stops at the first null byte, otherwise printing proceeds (including null
- bytes) until either print_max or LEN characters have been printed,
- whichever is smaller. */
+/* Read a string from the inferior, at ADDR, with LEN characters of WIDTH bytes
+ each. Fetch at most FETCHLIMIT characters. BUFFER will be set to a newly
+ allocated buffer containing the string, which the caller is responsible to
+ free, and BYTES_READ will be set to the number of bytes read. Returns 0 on
+ success, or errno on failure.
-/* FIXME: Use target_read_string. */
+ If LEN > 0, reads exactly LEN characters (including eventual NULs in
+ the middle or end of the string). If LEN is -1, stops at the first
+ null character (not necessarily the first null byte) up to a maximum
+ of FETCHLIMIT characters. Set FETCHLIMIT to UINT_MAX to read as many
+ characters as possible from the string.
-int
-val_print_string (CORE_ADDR addr, int len, int width, struct ui_file *stream,
- const struct value_print_options *options)
-{
- int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
- int errcode; /* Errno returned from bad reads. */
- unsigned int fetchlimit; /* Maximum number of chars to print. */
- unsigned int nfetch; /* Chars to fetch / chars fetched. */
- unsigned int chunksize; /* Size of each fetch, in chars. */
- gdb_byte *buffer = NULL; /* Dynamically growable fetch buffer. */
- gdb_byte *bufptr; /* Pointer to next available byte in buffer. */
- gdb_byte *limit; /* First location past end of fetch buffer. */
- struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
- int found_nul; /* Non-zero if we found the nul char */
+ Unless an exception is thrown, BUFFER will always be allocated, even on
+ failure. In this case, some characters might have been read before the
+ failure happened. Check BYTES_READ to recognize this situation.
- /* First we need to figure out the limit on the number of characters we are
- going to attempt to fetch and print. This is actually pretty simple. If
- LEN >= zero, then the limit is the minimum of LEN and print_max. If
- LEN is -1, then the limit is print_max. This is true regardless of
- whether print_max is zero, UINT_MAX (unlimited), or something in between,
- because finding the null byte (or available memory) is what actually
- limits the fetch. */
-
- fetchlimit = (len == -1 ? options->print_max : min (len, options->print_max));
+ Note: There was a FIXME asking to make this code use target_read_string,
+ but this function is more general (can read past null characters, up to
+ given LEN). Besides, it is used much more often than target_read_string
+ so it is more tested. Perhaps callers of target_read_string should use
+ this function instead? */
- /* Now decide how large of chunks to try to read in one operation. This
+int
+read_string (CORE_ADDR addr, int len, int width, unsigned int fetchlimit,
+ enum bfd_endian byte_order, gdb_byte **buffer, int *bytes_read)
+{
+ int found_nul; /* Non-zero if we found the nul char. */
+ int errcode; /* Errno returned from bad reads. */
+ unsigned int nfetch; /* Chars to fetch / chars fetched. */
+ unsigned int chunksize; /* Size of each fetch, in chars. */
+ gdb_byte *bufptr; /* Pointer to next available byte in
+ buffer. */
+ gdb_byte *limit; /* First location past end of fetch buffer. */
+ struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+
+ /* Decide how large of chunks to try to read in one operation. This
is also pretty simple. If LEN >= zero, then we want fetchlimit chars,
so we might as well read them all in one operation. If LEN is -1, we
- are looking for a null terminator to end the fetching, so we might as
+ are looking for a NUL terminator to end the fetching, so we might as
well read in blocks that are large enough to be efficient, but not so
large as to be slow if fetchlimit happens to be large. So we choose the
minimum of 8 and fetchlimit. We used to use 200 instead of 8 but
chunksize = (len == -1 ? min (8, fetchlimit) : fetchlimit);
- /* Loop until we either have all the characters to print, or we encounter
- some error, such as bumping into the end of the address space. */
+ /* Loop until we either have all the characters, or we encounter
+ some error, such as bumping into the end of the address space. */
found_nul = 0;
- old_chain = make_cleanup (null_cleanup, 0);
+ *buffer = NULL;
+
+ old_chain = make_cleanup (free_current_contents, buffer);
if (len > 0)
{
- buffer = (gdb_byte *) xmalloc (len * width);
- bufptr = buffer;
- old_chain = make_cleanup (xfree, buffer);
+ *buffer = (gdb_byte *) xmalloc (len * width);
+ bufptr = *buffer;
nfetch = partial_memory_read (addr, bufptr, len * width, &errcode)
/ width;
else if (len == -1)
{
unsigned long bufsize = 0;
+
do
{
QUIT;
nfetch = min (chunksize, fetchlimit - bufsize);
- if (buffer == NULL)
- buffer = (gdb_byte *) xmalloc (nfetch * width);
+ if (*buffer == NULL)
+ *buffer = (gdb_byte *) xmalloc (nfetch * width);
else
- {
- discard_cleanups (old_chain);
- buffer = (gdb_byte *) xrealloc (buffer, (nfetch + bufsize) * width);
- }
+ *buffer = (gdb_byte *) xrealloc (*buffer,
+ (nfetch + bufsize) * width);
- old_chain = make_cleanup (xfree, buffer);
- bufptr = buffer + bufsize * width;
+ bufptr = *buffer + bufsize * width;
bufsize += nfetch;
- /* Read as much as we can. */
+ /* Read as much as we can. */
nfetch = partial_memory_read (addr, bufptr, nfetch * width, &errcode)
- / width;
+ / width;
- /* Scan this chunk for the null byte that terminates the string
+ /* Scan this chunk for the null character that terminates the string
to print. If found, we don't need to fetch any more. Note
that bufptr is explicitly left pointing at the next character
- after the null byte, or at the next character after the end of
- the buffer. */
+ after the null character, or at the next character after the end
+ of the buffer. */
limit = bufptr + nfetch * width;
while (bufptr < limit)
{
unsigned long c;
- c = extract_unsigned_integer (bufptr, width);
+ c = extract_unsigned_integer (bufptr, width, byte_order);
addr += width;
bufptr += width;
if (c == 0)
{
/* We don't care about any error which happened after
- the NULL terminator. */
+ the NUL terminator. */
errcode = 0;
found_nul = 1;
break;
}
}
while (errcode == 0 /* no error */
- && bufptr - buffer < fetchlimit * width /* no overrun */
- && !found_nul); /* haven't found nul yet */
+ && bufptr - *buffer < fetchlimit * width /* no overrun */
+ && !found_nul); /* haven't found NUL yet */
}
else
- { /* length of string is really 0! */
- buffer = bufptr = NULL;
+ { /* Length of string is really 0! */
+ /* We always allocate *buffer. */
+ *buffer = bufptr = xmalloc (1);
errcode = 0;
}
/* bufptr and addr now point immediately beyond the last byte which we
consider part of the string (including a '\0' which ends the string). */
+ *bytes_read = bufptr - *buffer;
+
+ QUIT;
+
+ discard_cleanups (old_chain);
+
+ return errcode;
+}
+
+/* Print a string from the inferior, starting at ADDR and printing up to LEN
+ characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
+ stops at the first null byte, otherwise printing proceeds (including null
+ bytes) until either print_max or LEN characters have been printed,
+ whichever is smaller. ENCODING is the name of the string's
+ encoding. It can be NULL, in which case the target encoding is
+ assumed. */
- /* We now have either successfully filled the buffer to fetchlimit, or
- terminated early due to an error or finding a null char when LEN is -1. */
+int
+val_print_string (struct type *elttype, const char *encoding,
+ CORE_ADDR addr, int len,
+ struct ui_file *stream,
+ const struct value_print_options *options)
+{
+ int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
+ int errcode; /* Errno returned from bad reads. */
+ int found_nul; /* Non-zero if we found the nul char. */
+ unsigned int fetchlimit; /* Maximum number of chars to print. */
+ int bytes_read;
+ gdb_byte *buffer = NULL; /* Dynamically growable fetch buffer. */
+ struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+ struct gdbarch *gdbarch = get_type_arch (elttype);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int width = TYPE_LENGTH (elttype);
+ /* First we need to figure out the limit on the number of characters we are
+ going to attempt to fetch and print. This is actually pretty simple. If
+ LEN >= zero, then the limit is the minimum of LEN and print_max. If
+ LEN is -1, then the limit is print_max. This is true regardless of
+ whether print_max is zero, UINT_MAX (unlimited), or something in between,
+ because finding the null byte (or available memory) is what actually
+ limits the fetch. */
+
+ fetchlimit = (len == -1 ? options->print_max : min (len,
+ options->print_max));
+
+ errcode = read_string (addr, len, width, fetchlimit, byte_order,
+ &buffer, &bytes_read);
+ old_chain = make_cleanup (xfree, buffer);
+
+ addr += bytes_read;
+
+ /* We now have either successfully filled the buffer to fetchlimit,
+ or terminated early due to an error or finding a null char when
+ LEN is -1. */
+
+ /* Determine found_nul by looking at the last character read. */
+ found_nul = extract_unsigned_integer (buffer + bytes_read - width, width,
+ byte_order) == 0;
if (len == -1 && !found_nul)
{
gdb_byte *peekbuf;
- /* We didn't find a null terminator we were looking for. Attempt
+ /* We didn't find a NUL terminator we were looking for. Attempt
to peek at the next character. If not successful, or it is not
a null byte, then force ellipsis to be printed. */
peekbuf = (gdb_byte *) alloca (width);
if (target_read_memory (addr, peekbuf, width) == 0
- && extract_unsigned_integer (peekbuf, width) != 0)
+ && extract_unsigned_integer (peekbuf, width, byte_order) != 0)
force_ellipsis = 1;
}
- else if ((len >= 0 && errcode != 0) || (len > (bufptr - buffer) / width))
+ else if ((len >= 0 && errcode != 0) || (len > bytes_read / width))
{
/* Getting an error when we have a requested length, or fetching less
than the number of characters actually requested, always make us
- print ellipsis. */
+ print ellipsis. */
force_ellipsis = 1;
}
- QUIT;
-
/* If we get an error before fetching anything, don't print a string.
But if we fetch something and then get an error, print the string
and then the error message. */
- if (errcode == 0 || bufptr > buffer)
+ if (errcode == 0 || bytes_read > 0)
{
if (options->addressprint)
{
fputs_filtered (" ", stream);
}
- LA_PRINT_STRING (stream, buffer, (bufptr - buffer) / width, width, force_ellipsis, options);
+ LA_PRINT_STRING (stream, elttype, buffer, bytes_read / width,
+ encoding, force_ellipsis, options);
}
if (errcode != 0)
if (errcode == EIO)
{
fprintf_filtered (stream, " <Address ");
- fputs_filtered (paddress (addr), stream);
+ fputs_filtered (paddress (gdbarch, addr), stream);
fprintf_filtered (stream, " out of bounds>");
}
else
{
fprintf_filtered (stream, " <Error reading address ");
- fputs_filtered (paddress (addr), stream);
+ fputs_filtered (paddress (gdbarch, addr), stream);
fprintf_filtered (stream, ": %s>", safe_strerror (errcode));
}
}
+
gdb_flush (stream);
do_cleanups (old_chain);
- return ((bufptr - buffer) / width);
+
+ return (bytes_read / width);
}
\f
radix greater than 1, even if we don't have unique digits for every
value from 0 to radix-1, but in practice we lose on large radix values.
We should either fix the lossage or restrict the radix range more.
- (FIXME). */
+ (FIXME). */
if (radix < 2)
{
input_radix_1 = input_radix = radix;
if (from_tty)
{
- printf_filtered (_("Input radix now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input radix now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
set_output_radix_1 (int from_tty, unsigned radix)
{
/* Validate the radix and disallow ones that we aren't prepared to
- handle correctly, leaving the radix unchanged. */
+ handle correctly, leaving the radix unchanged. */
switch (radix)
{
case 16:
break;
default:
output_radix_1 = output_radix;
- error (_("Unsupported output radix ``decimal %u''; output radix unchanged."),
+ error (_("Unsupported output radix ``decimal %u''; "
+ "output radix unchanged."),
radix);
}
output_radix_1 = output_radix = radix;
if (from_tty)
{
- printf_filtered (_("Output radix now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Output radix now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
It may be useful to have an unusual input radix. If the user wishes to
set an input radix that is not valid as an output radix, he needs to use
- the 'set input-radix' command. */
+ the 'set input-radix' command. */
static void
set_radix (char *arg, int from_tty)
set_input_radix_1 (0, radix);
if (from_tty)
{
- printf_filtered (_("Input and output radices now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input and output radices now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
-/* Show both the input and output radices. */
+/* Show both the input and output radices. */
static void
show_radix (char *arg, int from_tty)
{
if (input_radix == output_radix)
{
- printf_filtered (_("Input and output radices set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input and output radices set to "
+ "decimal %u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
}
else
{
- printf_filtered (_("Input radix set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input radix set to decimal "
+ "%u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
- printf_filtered (_("Output radix set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Output radix set to decimal "
+ "%u, hex %x, octal %o.\n"),
output_radix, output_radix, output_radix);
}
}
void
_initialize_valprint (void)
{
- struct cmd_list_element *c;
-
add_prefix_cmd ("print", no_class, set_print,
_("Generic command for setting how things print."),
&setprintlist, "set print ", 0, &setlist);
add_alias_cmd ("p", "print", no_class, 1, &setlist);
- /* prefer set print to set prompt */
+ /* Prefer set print to set prompt. */
add_alias_cmd ("pr", "print", no_class, 1, &setlist);
add_prefix_cmd ("print", no_class, show_print,
show_addressprint,
&setprintlist, &showprintlist);
- add_setshow_uinteger_cmd ("input-radix", class_support, &input_radix_1,
- _("\
+ add_setshow_zuinteger_cmd ("input-radix", class_support, &input_radix_1,
+ _("\
Set default input radix for entering numbers."), _("\
Show default input radix for entering numbers."), NULL,
- set_input_radix,
- show_input_radix,
- &setlist, &showlist);
+ set_input_radix,
+ show_input_radix,
+ &setlist, &showlist);
- add_setshow_uinteger_cmd ("output-radix", class_support, &output_radix_1,
- _("\
+ add_setshow_zuinteger_cmd ("output-radix", class_support, &output_radix_1,
+ _("\
Set default output radix for printing of values."), _("\
Show default output radix for printing of values."), NULL,
- set_output_radix,
- show_output_radix,
- &setlist, &showlist);
+ set_output_radix,
+ show_output_radix,
+ &setlist, &showlist);
/* The "set radix" and "show radix" commands are special in that
they are like normal set and show commands but allow two normally
independent variables to be either set or shown with a single
command. So the usual deprecated_add_set_cmd() and [deleted]
- add_show_from_set() commands aren't really appropriate. */
+ add_show_from_set() commands aren't really appropriate. */
/* FIXME: i18n: With the new add_setshow_integer command, that is no
longer true - show can display anything. */
add_cmd ("radix", class_support, set_radix, _("\
projects / deliverable / binutils-gdb.git / blobdiff