-/* Native-dependent code for Linux/x86-64.
+/* Native-dependent code for GNU/Linux x86-64.
Copyright 2001, 2002 Free Software Foundation, Inc.
#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
-#include "i387-nat.h"
#include "gdb_assert.h"
+#include "gdb_string.h"
#include "x86-64-tdep.h"
#include <sys/ptrace.h>
#include <sys/debugreg.h>
#include <sys/syscall.h>
#include <sys/procfs.h>
+#include <sys/reg.h>
+
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register array layout. */
+
+static int x86_64_regmap[] = {
+ RAX, RBX, RCX, RDX,
+ RSI, RDI, RBP, RSP,
+ R8, R9, R10, R11,
+ R12, R13, R14, R15,
+ RIP, EFLAGS, CS, SS,
+ DS, ES, FS, GS
+};
static unsigned long
x86_64_linux_dr_get (int regnum)
tid = PIDGET (inferior_ptid);
errno = 0;
- ptrace (PT_WRITE_U, tid,
- offsetof (struct user, u_debugreg[regnum]), value);
+ ptrace (PT_WRITE_U, tid, offsetof (struct user, u_debugreg[regnum]), value);
if (errno != 0)
perror_with_name ("Couldn't write debug register");
}
}
\f
-/* The register sets used in Linux ELF core-dumps are identical to the
- register sets used by `ptrace'. */
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets used by `ptrace'. */
#define GETREGS_SUPPLIES(regno) \
- (0 <= (regno) && (regno) <= 17)
+ (0 <= (regno) && (regno) < x86_64_num_gregs)
#define GETFPREGS_SUPPLIES(regno) \
(FP0_REGNUM <= (regno) && (regno) <= MXCSR_REGNUM)
-
-#define PTRACE_XFER_TYPE unsigned long
\f
/* Transfering the general-purpose registers between GDB, inferiors
elf_greg_t *regp = (elf_greg_t *) gregsetp;
int i;
- for (i = 0; i < X86_64_NUM_GREGS; i++)
+ for (i = 0; i < x86_64_num_gregs; i++)
supply_register (i, (char *) (regp + x86_64_regmap[i]));
}
elf_greg_t *regp = (elf_greg_t *) gregsetp;
int i;
- for (i = 0; i < X86_64_NUM_GREGS; i++)
+ for (i = 0; i < x86_64_num_gregs; i++)
if ((regno == -1 || regno == i))
- read_register_gen (i, regp + x86_64_regmap[i]);
+ deprecated_read_register_gen (i, (char *) (regp + x86_64_regmap[i]));
}
/* Fetch all general-purpose registers from process/thread TID and
elf_gregset_t regs;
if (ptrace (PTRACE_GETREGS, tid, 0, (long) ®s) < 0)
- perror_with_name ("Couldn't get registers");
+ perror_with_name ("Couldn't get registers");
supply_gregset (®s);
}
/* Transfering floating-point registers between GDB, inferiors and cores. */
-/* Fill GDB's register array with the floating-point register values in
- *FPREGSETP. */
+static void *
+x86_64_fxsave_offset (elf_fpregset_t * fxsave, int regnum)
+{
+ const char *reg_name;
+ int reg_index;
+
+ gdb_assert (x86_64_num_gregs - 1 < regnum && regnum < x86_64_num_regs);
+
+ reg_name = x86_64_register_name (regnum);
+
+ if (reg_name[0] == 's' && reg_name[1] == 't')
+ {
+ reg_index = reg_name[2] - '0';
+ return &fxsave->st_space[reg_index * 2];
+ }
+
+ if (reg_name[0] == 'x' && reg_name[1] == 'm' && reg_name[2] == 'm')
+ {
+ reg_index = reg_name[3] - '0';
+ return &fxsave->xmm_space[reg_index * 4];
+ }
+
+ if (strcmp (reg_name, "mxcsr") == 0)
+ return &fxsave->mxcsr;
+
+ return NULL;
+}
+
+/* Fill GDB's register array with the floating-point and SSE register
+ values in *FXSAVE. This function masks off any of the reserved
+ bits in *FXSAVE. */
void
-supply_fpregset (elf_fpregset_t * fpregsetp)
+supply_fpregset (elf_fpregset_t * fxsave)
{
- i387_supply_fxsave ((char *) fpregsetp);
+ int i, reg_st0, reg_mxcsr;
+
+ reg_st0 = x86_64_register_number ("st0");
+ reg_mxcsr = x86_64_register_number ("mxcsr");
+
+ gdb_assert (reg_st0 > 0 && reg_mxcsr > reg_st0);
+
+ for (i = reg_st0; i <= reg_mxcsr; i++)
+ supply_register (i, x86_64_fxsave_offset (fxsave, i));
}
-/* Fill register REGNO (if it is a floating-point register) in
- *FPREGSETP with the value in GDB's register array. If REGNO is -1,
- do this for all registers. */
+/* Fill register REGNUM (if it is a floating-point or SSE register) in
+ *FXSAVE with the value in GDB's register array. If REGNUM is -1, do
+ this for all registers. This function doesn't touch any of the
+ reserved bits in *FXSAVE. */
void
-fill_fpregset (elf_fpregset_t * fpregsetp, int regno)
+fill_fpregset (elf_fpregset_t * fxsave, int regnum)
{
- i387_fill_fxsave ((char *) fpregsetp, regno);
+ int i, last_regnum = MXCSR_REGNUM;
+ void *ptr;
+
+ if (gdbarch_tdep (current_gdbarch)->num_xmm_regs == 0)
+ last_regnum = FOP_REGNUM;
+
+ for (i = FP0_REGNUM; i <= last_regnum; i++)
+ if (regnum == -1 || regnum == i)
+ {
+ ptr = x86_64_fxsave_offset (fxsave, i);
+ if (ptr)
+ regcache_collect (i, ptr);
+ }
}
/* Fetch all floating-point registers from process/thread TID and store
{
int tid;
- /* Linux LWP ID's are process ID's. */
+ /* GNU/Linux LWP ID's are process ID's. */
if ((tid = TIDGET (inferior_ptid)) == 0)
tid = PIDGET (inferior_ptid); /* Not a threaded program. */
{
int tid;
- /* Linux LWP ID's are process ID's. */
+ /* GNU/Linux LWP ID's are process ID's. */
if ((tid = TIDGET (inferior_ptid)) == 0)
tid = PIDGET (inferior_ptid); /* Not a threaded program. */
/* Offset to saved processor registers from <asm/ucontext.h> */
#define LINUX_UCONTEXT_SIGCONTEXT_OFFSET (36)
-/* Resume execution of the inferior process.
- If STEP is nonzero, single-step it.
- If SIGNAL is nonzero, give it that signal. */
-
-void
-child_resume (ptid_t ptid, int step, enum target_signal signal)
-{
- int pid = PIDGET (ptid);
- int request = PTRACE_CONT;
-
- if (pid == -1)
- /* Resume all threads. */
- /* I think this only gets used in the non-threaded case, where "resume
- all threads" and "resume inferior_ptid" are the same. */
- pid = PIDGET (inferior_ptid);
-
- if (step)
- {
- CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid));
- unsigned char buf[LINUX_SYSCALL_LEN];
-
- request = PTRACE_SINGLESTEP;
-
- /* Returning from a signal trampoline is done by calling a
- special system call (sigreturn or rt_sigreturn, see
- i386-linux-tdep.c for more information). This system call
- restores the registers that were saved when the signal was
- raised, including %eflags. That means that single-stepping
- won't work. Instead, we'll have to modify the signal context
- that's about to be restored, and set the trace flag there. */
-
- /* First check if PC is at a system call. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
- && memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
- {
- int syscall =
- read_register_pid (LINUX_SYSCALL_REGNUM, pid_to_ptid (pid));
-
- /* Then check the system call number. */
- if (syscall == SYS_rt_sigreturn)
- {
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR addr = sp;
- unsigned long int eflags;
-
- addr +=
- sizeof (struct siginfo) + LINUX_UCONTEXT_SIGCONTEXT_OFFSET;
-
- /* Set the trace flag in the context that's about to be
- restored. */
- addr += LINUX_SIGCONTEXT_EFLAGS_OFFSET;
- read_memory (addr, (char *) &eflags, 8);
- eflags |= 0x0100;
- write_memory (addr, (char *) &eflags, 8);
- }
- }
- }
-
- if (ptrace (request, pid, 0, target_signal_to_host (signal)) == -1)
- perror_with_name ("ptrace");
-}
-\f
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
- to debugger memory starting at MYADDR. Copy to inferior if
- WRITE is nonzero. TARGET is ignored.
-
- Returns the length copied, which is either the LEN argument or zero.
- This xfer function does not do partial moves, since child_ops
- doesn't allow memory operations to cross below us in the target stack
- anyway. */
-
-int
-child_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
- struct mem_attrib *attrib, struct target_ops *target)
-{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & -sizeof (PTRACE_XFER_TYPE);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
- / sizeof (PTRACE_XFER_TYPE);
- /* Allocate buffer of that many longwords. */
- /* FIXME (alloca): This code, cloned from infptrace.c, is unsafe
- because it uses alloca to allocate a buffer of arbitrary size.
- For very large xfers, this could crash GDB's stack. */
- register PTRACE_XFER_TYPE *buffer
- = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
-
- if (write)
- {
- /* Fill start and end extra bytes of buffer with existing memory data. */
- if (addr != memaddr || len < (int) sizeof (PTRACE_XFER_TYPE))
- {
- /* Need part of initial word -- fetch it. */
- ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer);
- }
-
- if (count > 1) /* FIXME, avoid if even boundary */
- {
- ptrace (PT_READ_I, PIDGET (inferior_ptid),
- ((PTRACE_ARG3_TYPE)
- (addr + (count - 1) * sizeof (PTRACE_XFER_TYPE))),
- buffer + count - 1);
- }
-
- /* Copy data to be written over corresponding part of buffer */
-
- memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
- myaddr, len);
-
- /* Write the entire buffer. */
-
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
- {
- errno = 0;
- ptrace (PT_WRITE_D, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer[i]);
- if (errno)
- {
- /* Using the appropriate one (I or D) is necessary for
- Gould NP1, at least. */
- errno = 0;
- ptrace (PT_WRITE_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer[i]);
- }
- if (errno)
- return 0;
- }
-#ifdef CLEAR_INSN_CACHE
- CLEAR_INSN_CACHE ();
-#endif
- }
- else
- {
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
- {
- errno = 0;
- ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer + i);
- if (errno)
- return 0;
- }
-
- /* Copy appropriate bytes out of the buffer. */
- memcpy (myaddr,
- (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
- len);
- }
- return len;
-}
-
/* Interpreting register set info found in core files. */
-
/* Provide registers to GDB from a core file.
CORE_REG_SECT points to an array of bytes, which are the contents
0 --- the general-purpose register set, in elf_gregset_t format
2 --- the floating-point register set, in elf_fpregset_t format
- REG_ADDR isn't used on Linux. */
+ REG_ADDR isn't used on GNU/Linux. */
static void
fetch_core_registers (char *core_reg_sect, unsigned core_reg_size,
}
}
-/* Register that we are able to handle Linux ELF core file formats. */
+/* Register that we are able to handle GNU/Linux ELF core file formats. */
static struct core_fns linux_elf_core_fns = {
bfd_target_elf_flavour, /* core_flavour */
#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
#endif
-/* Record the value of the debug control register. */
-static long debug_control_mirror;
-
-/* Record which address associates with which register. */
-static CORE_ADDR address_lookup[DR_LASTADDR - DR_FIRSTADDR + 1];
+/* Return the address of register REGNUM. BLOCKEND is the value of
+ u.u_ar0, which should point to the registers. */
+CORE_ADDR
+x86_64_register_u_addr (CORE_ADDR blockend, int regnum)
+{
+ struct user u;
+ CORE_ADDR fpstate;
+ CORE_ADDR ubase;
+ ubase = blockend;
+ if (IS_FP_REGNUM (regnum))
+ {
+ fpstate = ubase + ((char *) &u.i387.st_space - (char *) &u);
+ return (fpstate + 16 * (regnum - FP0_REGNUM));
+ }
+ else if (IS_SSE_REGNUM (regnum))
+ {
+ fpstate = ubase + ((char *) &u.i387.xmm_space - (char *) &u);
+ return (fpstate + 16 * (regnum - XMM0_REGNUM));
+ }
+ else
+ return (ubase + 8 * x86_64_regmap[regnum]);
+}
void
_initialize_x86_64_linux_nat (void)
{
add_core_fns (&linux_elf_core_fns);
}
+
+int
+kernel_u_size (void)
+{
+ return (sizeof (struct user));
+}
projects / deliverable / binutils-gdb.git / blobdiff