/* Target-dependent code for the Xtensa port of GDB, the GNU debugger.
- Copyright (C) 2003, 2005, 2006, 2007, 2008, 2009, 2010, 2011
- Free Software Foundation, Inc.
+ Copyright (C) 2003, 2005-2012 Free Software Foundation, Inc.
This file is part of GDB.
#define PS_WOE (1<<18)
#define PS_EXC (1<<4)
-static inline int
+static int
windowing_enabled (struct gdbarch *gdbarch, unsigned int ps)
{
/* If we know CALL0 ABI is set explicitly, say it is Call0. */
return (areg > 15) ? -1 : areg;
}
-static inline unsigned long
+/* Read Xtensa register directly from the hardware. */
+static unsigned long
xtensa_read_register (int regnum)
{
ULONGEST value;
return (unsigned long) value;
}
-static inline void
+/* Write Xtensa register directly to the hardware. */
+static void
xtensa_write_register (int regnum, ULONGEST value)
{
regcache_raw_write_unsigned (get_current_regcache (), regnum, value);
if (tp == NULL)
{
- char *name = xmalloc (16);
+ char *name = xstrprintf ("int%d", size * 8);
tp = xmalloc (sizeof (struct ctype_cache));
tp->next = tdep->type_entries;
tdep->type_entries = tp;
tp->size = size;
-
- sprintf (name, "int%d", size * 8);
tp->virtual_type
- = arch_integer_type (gdbarch, size * 8, 1, xstrdup (name));
+ = arch_integer_type (gdbarch, size * 8, 1, name);
+ xfree (name);
}
reg->ctype = tp->virtual_type;
/* Read a tie state or mapped registers. Read the masked areas
of the registers and assemble them into a single value. */
-static void
+static enum register_status
xtensa_register_read_masked (struct regcache *regcache,
xtensa_register_t *reg, gdb_byte *buffer)
{
int r = mask->mask[i].reg_num;
if (r >= 0)
{
+ enum register_status status;
ULONGEST val;
- regcache_cooked_read_unsigned (regcache, r, &val);
+
+ status = regcache_cooked_read_unsigned (regcache, r, &val);
+ if (status != REG_VALID)
+ return status;
regval = (unsigned int) val;
}
else
buffer[i] = mem & 0xff;
mem >>= 8;
}
+
+ return REG_VALID;
}
/* Read pseudo registers. */
-static void
+static enum register_status
xtensa_pseudo_register_read (struct gdbarch *gdbarch,
struct regcache *regcache,
int regnum,
&& (regnum <= gdbarch_tdep (gdbarch)->a0_base + 15))
{
gdb_byte *buf = (gdb_byte *) alloca (MAX_REGISTER_SIZE);
+ enum register_status status;
- regcache_raw_read (regcache, gdbarch_tdep (gdbarch)->wb_regnum, buf);
+ status = regcache_raw_read (regcache,
+ gdbarch_tdep (gdbarch)->wb_regnum,
+ buf);
+ if (status != REG_VALID)
+ return status;
regnum = arreg_number (gdbarch, regnum,
extract_unsigned_integer (buf, 4, byte_order));
}
/* We can always read non-pseudo registers. */
if (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch))
- regcache_raw_read (regcache, regnum, buffer);
-
+ return regcache_raw_read (regcache, regnum, buffer);
/* We have to find out how to deal with priveleged registers.
Let's treat them as pseudo-registers, but we cannot read/write them. */
buffer[1] = (gdb_byte)0;
buffer[2] = (gdb_byte)0;
buffer[3] = (gdb_byte)0;
+ return REG_VALID;
}
/* Pseudo registers. */
else if (regnum >= 0
{
warning (_("cannot read register %s"),
xtensa_register_name (gdbarch, regnum));
- return;
+ return REG_VALID;
}
}
if (flags & xtTargetFlagsUseFetchStore)
{
warning (_("cannot read register"));
- return;
+ return REG_VALID;
}
/* On some targets (esp. simulators), we can always read the reg. */
else if ((flags & xtTargetFlagsNonVisibleRegs) == 0)
{
warning (_("cannot read register"));
- return;
+ return REG_VALID;
}
}
/* We can always read mapped registers. */
else if (type == xtRegisterTypeMapped || type == xtRegisterTypeTieState)
- {
- xtensa_register_read_masked (regcache, reg, buffer);
- return;
- }
+ return xtensa_register_read_masked (regcache, reg, buffer);
/* Assume that we can read the register. */
- regcache_raw_read (regcache, regnum, buffer);
+ return regcache_raw_read (regcache, regnum, buffer);
}
else
internal_error (__FILE__, __LINE__,
&& (regnum <= gdbarch_tdep (gdbarch)->a0_base + 15))
{
gdb_byte *buf = (gdb_byte *) alloca (MAX_REGISTER_SIZE);
- unsigned int wb;
regcache_raw_read (regcache,
gdbarch_tdep (gdbarch)->wb_regnum, buf);
_("invalid register number %d"), regnum);
}
-static inline char xtensa_hextochar (int xdigit)
-{
- static char hex[]="0123456789abcdef";
-
- return hex[xdigit & 0x0f];
-}
-
static struct reggroup *xtensa_ar_reggroup;
static struct reggroup *xtensa_user_reggroup;
static struct reggroup *xtensa_vectra_reggroup;
for (i = 0; i < XTENSA_MAX_COPROCESSOR; i++)
{
- cpname[2] = xtensa_hextochar (i);
+ cpname[2] = '0' + i;
xtensa_cp[i] = reggroup_new (cpname, USER_REGGROUP);
}
}
xtensa_register_group_t rg = reg->group;
int cp_number;
+ if (group == save_reggroup)
+ /* Every single register should be included into the list of registers
+ to be watched for changes while using -data-list-changed-registers. */
+ return 1;
+
/* First, skip registers that are not visible to this target
(unknown and unmapped registers when not using ISS). */
return rg & xtRegisterGroupFloat;
if (group == general_reggroup)
return rg & xtRegisterGroupGeneral;
- if (group == float_reggroup)
- return rg & xtRegisterGroupFloat;
if (group == system_reggroup)
return rg & xtRegisterGroupState;
if (group == vector_reggroup || group == xtensa_vectra_reggroup)
return rg & xtRegisterGroupVectra;
- if (group == save_reggroup || group == restore_reggroup)
+ if (group == restore_reggroup)
return (regnum < gdbarch_num_regs (gdbarch)
&& (reg->flags & SAVE_REST_FLAGS) == SAVE_REST_VALID);
- if ((cp_number = xtensa_coprocessor_register_group (group)) >= 0)
+ cp_number = xtensa_coprocessor_register_group (group);
+ if (cp_number >= 0)
return rg & (xtRegisterGroupCP0 << cp_number);
else
return 1;
typedef struct xtensa_c0reg
{
- int fr_reg; /* original register from which register content
- is derived, or C0_CONST, or C0_INEXP. */
- int fr_ofs; /* constant offset from reg, or immediate value. */
- int to_stk; /* offset from original SP to register (4-byte
- aligned), or C0_NOSTK if register has not
- been saved. */
+ int fr_reg; /* original register from which register content
+ is derived, or C0_CONST, or C0_INEXP. */
+ int fr_ofs; /* constant offset from reg, or immediate value. */
+ int to_stk; /* offset from original SP to register (4-byte aligned),
+ or C0_NOSTK if register has not been saved. */
} xtensa_c0reg_t;
-
/* Frame cache part for Call0 ABI. */
typedef struct xtensa_call0_frame_cache
{
- int c0_frmsz; /* Stack frame size. */
- int c0_hasfp; /* Current frame uses frame
- pointer. */
- int fp_regnum; /* A-register used as FP. */
- int c0_fp; /* Actual value of frame pointer. */
- xtensa_c0reg_t c0_rt[C0_NREGS]; /* Register tracking information. */
+ int c0_frmsz; /* Stack frame size. */
+ int c0_hasfp; /* Current frame uses frame pointer. */
+ int fp_regnum; /* A-register used as FP. */
+ int c0_fp; /* Actual value of frame pointer. */
+ int c0_fpalign; /* Dinamic adjustment for the stack
+ pointer. It's an AND mask. Zero,
+ if alignment was not adjusted. */
+ int c0_old_sp; /* In case of dynamic adjustment, it is
+ a register holding unaligned sp.
+ C0_INEXP, when undefined. */
+ int c0_sp_ofs; /* If "c0_old_sp" was spilled it's a
+ stack offset. C0_NOSTK otherwise. */
+
+ xtensa_c0reg_t c0_rt[C0_NREGS]; /* Register tracking information. */
} xtensa_call0_frame_cache_t;
typedef struct xtensa_frame_cache
cache->c0.c0_hasfp = 0;
cache->c0.fp_regnum = -1;
cache->c0.c0_fp = -1;
+ cache->c0.c0_fpalign = 0;
+ cache->c0.c0_old_sp = C0_INEXP;
+ cache->c0.c0_sp_ofs = C0_NOSTK;
for (i = 0; i < C0_NREGS; i++)
{
static void
call0_frame_cache (struct frame_info *this_frame,
- xtensa_frame_cache_t *cache,
- CORE_ADDR pc, CORE_ADDR litbase);
+ xtensa_frame_cache_t *cache, CORE_ADDR pc);
static void
xtensa_window_interrupt_frame_cache (struct frame_info *this_frame,
pc = get_frame_register_unsigned (this_frame, gdbarch_pc_regnum (gdbarch));
ps_regnum = gdbarch_ps_regnum (gdbarch);
- ps = (ps_regnum >= 0)
- ? get_frame_register_unsigned (this_frame, ps_regnum) : TX_PS;
+ ps = (ps_regnum >= 0
+ ? get_frame_register_unsigned (this_frame, ps_regnum) : TX_PS);
windowed = windowing_enabled (gdbarch, ps);
}
else /* Call0 framework. */
{
- unsigned int litbase_regnum = gdbarch_tdep (gdbarch)->litbase_regnum;
- CORE_ADDR litbase = (litbase_regnum == -1)
- ? 0 : get_frame_register_unsigned (this_frame, litbase_regnum);
-
- call0_frame_cache (this_frame, cache, pc, litbase);
+ call0_frame_cache (this_frame, cache, pc);
fp_regnum = cache->c0.fp_regnum;
}
return cache;
}
+static int xtensa_session_once_reported = 1;
+
+/* Report a problem with prologue analysis while doing backtracing.
+ But, do it only once to avoid annoyng repeated messages. */
+
+static void
+warning_once (void)
+{
+ if (xtensa_session_once_reported == 0)
+ warning (_("\
+\nUnrecognised function prologue. Stack trace cannot be resolved. \
+This message will not be repeated in this session.\n"));
+
+ xtensa_session_once_reported = 1;
+}
+
+
static void
xtensa_frame_this_id (struct frame_info *this_frame,
void **this_cache,
xtensa_unwind =
{
NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
xtensa_frame_this_id,
xtensa_frame_prev_register,
NULL,
static enum return_value_convention
xtensa_return_value (struct gdbarch *gdbarch,
- struct type *func_type,
+ struct value *function,
struct type *valtype,
struct regcache *regcache,
gdb_byte *readbuf,
if (gdbarch_tdep (gdbarch)->call_abi != CallAbiCall0Only)
{
ULONGEST val;
+
ra = (bp_addr & 0x3fffffff) | 0x40000000;
regcache_raw_read_unsigned (regcache, gdbarch_ps_regnum (gdbarch), &val);
ps = (unsigned long) val & ~0x00030000;
/* Call0 ABI support routines. */
+/* Return true, if PC points to "ret" or "ret.n". */
+
+static int
+call0_ret (CORE_ADDR start_pc, CORE_ADDR finish_pc)
+{
+#define RETURN_RET goto done
+ xtensa_isa isa;
+ xtensa_insnbuf ins, slot;
+ char ibuf[XTENSA_ISA_BSZ];
+ CORE_ADDR ia, bt, ba;
+ xtensa_format ifmt;
+ int ilen, islots, is;
+ xtensa_opcode opc;
+ const char *opcname;
+ int found_ret = 0;
+
+ isa = xtensa_default_isa;
+ gdb_assert (XTENSA_ISA_BSZ >= xtensa_isa_maxlength (isa));
+ ins = xtensa_insnbuf_alloc (isa);
+ slot = xtensa_insnbuf_alloc (isa);
+ ba = 0;
+
+ for (ia = start_pc, bt = ia; ia < finish_pc ; ia += ilen)
+ {
+ if (ia + xtensa_isa_maxlength (isa) > bt)
+ {
+ ba = ia;
+ bt = (ba + XTENSA_ISA_BSZ) < finish_pc
+ ? ba + XTENSA_ISA_BSZ : finish_pc;
+ if (target_read_memory (ba, ibuf, bt - ba) != 0 )
+ RETURN_RET;
+ }
+
+ xtensa_insnbuf_from_chars (isa, ins, &ibuf[ia-ba], 0);
+ ifmt = xtensa_format_decode (isa, ins);
+ if (ifmt == XTENSA_UNDEFINED)
+ RETURN_RET;
+ ilen = xtensa_format_length (isa, ifmt);
+ if (ilen == XTENSA_UNDEFINED)
+ RETURN_RET;
+ islots = xtensa_format_num_slots (isa, ifmt);
+ if (islots == XTENSA_UNDEFINED)
+ RETURN_RET;
+
+ for (is = 0; is < islots; ++is)
+ {
+ if (xtensa_format_get_slot (isa, ifmt, is, ins, slot))
+ RETURN_RET;
+
+ opc = xtensa_opcode_decode (isa, ifmt, is, slot);
+ if (opc == XTENSA_UNDEFINED)
+ RETURN_RET;
+
+ opcname = xtensa_opcode_name (isa, opc);
+
+ if ((strcasecmp (opcname, "ret.n") == 0)
+ || (strcasecmp (opcname, "ret") == 0))
+ {
+ found_ret = 1;
+ RETURN_RET;
+ }
+ }
+ }
+ done:
+ xtensa_insnbuf_free(isa, slot);
+ xtensa_insnbuf_free(isa, ins);
+ return found_ret;
+}
+
/* Call0 opcode class. Opcodes are preclassified according to what they
mean for Call0 prologue analysis, and their number of significant operands.
The purpose of this is to simplify prologue analysis by separating
instruction decoding (libisa) from the semantics of prologue analysis. */
-typedef enum {
+typedef enum
+{
c0opc_illegal, /* Unknown to libisa (invalid) or 'ill' opcode. */
c0opc_uninteresting, /* Not interesting for Call0 prologue analysis. */
c0opc_flow, /* Flow control insn. */
c0opc_break, /* Debugger software breakpoints. */
c0opc_add, /* Adding two registers. */
c0opc_addi, /* Adding a register and an immediate. */
+ c0opc_and, /* Bitwise "and"-ing two registers. */
c0opc_sub, /* Subtracting a register from a register. */
c0opc_mov, /* Moving a register to a register. */
c0opc_movi, /* Moving an immediate to a register. */
else if (strcasecmp (opcname, "add") == 0
|| strcasecmp (opcname, "add.n") == 0)
opclass = c0opc_add;
+ else if (strcasecmp (opcname, "and") == 0)
+ opclass = c0opc_and;
else if (strcasecmp (opcname, "addi") == 0
|| strcasecmp (opcname, "addi.n") == 0
|| strcasecmp (opcname, "addmi") == 0)
be within a bundle. Updates the destination register tracking info
accordingly. The pc is needed only for pc-relative load instructions
(eg. l32r). The SP register number is needed to identify stores to
- the stack frame. */
+ the stack frame. Returns 0, if analysis was succesfull, non-zero
+ otherwise. */
-static void
-call0_track_op (struct gdbarch *gdbarch,
- xtensa_c0reg_t dst[], xtensa_c0reg_t src[],
+static int
+call0_track_op (struct gdbarch *gdbarch, xtensa_c0reg_t dst[], xtensa_c0reg_t src[],
xtensa_insn_kind opclass, int nods, unsigned odv[],
- CORE_ADDR pc, CORE_ADDR litbase, int spreg)
+ CORE_ADDR pc, int spreg, xtensa_frame_cache_t *cache)
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- unsigned litaddr, litval;
+ unsigned litbase, litaddr, litval;
switch (opclass)
{
}
else dst[odv[0]].fr_reg = C0_INEXP;
break;
+ case c0opc_and:
+ /* 3 operands: dst, src1, src2. */
+ gdb_assert (nods == 3);
+ if (cache->c0.c0_fpalign == 0)
+ {
+ /* Handle dynamic stack alignment. */
+ if ((src[odv[0]].fr_reg == spreg) && (src[odv[1]].fr_reg == spreg))
+ {
+ if (src[odv[2]].fr_reg == C0_CONST)
+ cache->c0.c0_fpalign = src[odv[2]].fr_ofs;
+ break;
+ }
+ else if ((src[odv[0]].fr_reg == spreg)
+ && (src[odv[2]].fr_reg == spreg))
+ {
+ if (src[odv[1]].fr_reg == C0_CONST)
+ cache->c0.c0_fpalign = src[odv[1]].fr_ofs;
+ break;
+ }
+ /* else fall through. */
+ }
+ if (src[odv[1]].fr_reg == C0_CONST)
+ {
+ dst[odv[0]].fr_reg = src[odv[2]].fr_reg;
+ dst[odv[0]].fr_ofs = src[odv[2]].fr_ofs & src[odv[1]].fr_ofs;
+ }
+ else if (src[odv[2]].fr_reg == C0_CONST)
+ {
+ dst[odv[0]].fr_reg = src[odv[1]].fr_reg;
+ dst[odv[0]].fr_ofs = src[odv[1]].fr_ofs & src[odv[2]].fr_ofs;
+ }
+ else dst[odv[0]].fr_reg = C0_INEXP;
+ break;
case c0opc_sub:
/* 3 operands: dst, src1, src2. */
gdb_assert (nods == 3);
case c0opc_mov:
/* 2 operands: dst, src [, src]. */
gdb_assert (nods == 2);
+ /* First, check if it's a special case of saving unaligned SP
+ to a spare register in case of dynamic stack adjustment.
+ But, only do it one time. The second time could be initializing
+ frame pointer. We don't want to overwrite the first one. */
+ if ((odv[1] == spreg) && (cache->c0.c0_old_sp == C0_INEXP))
+ cache->c0.c0_old_sp = odv[0];
+
dst[odv[0]].fr_reg = src[odv[1]].fr_reg;
dst[odv[0]].fr_ofs = src[odv[1]].fr_ofs;
break;
case c0opc_l32r:
/* 2 operands: dst, literal offset. */
gdb_assert (nods == 2);
+ /* litbase = xtensa_get_litbase (pc); can be also used. */
+ litbase = (gdbarch_tdep (gdbarch)->litbase_regnum == -1)
+ ? 0 : xtensa_read_register
+ (gdbarch_tdep (gdbarch)->litbase_regnum);
litaddr = litbase & 1
? (litbase & ~1) + (signed)odv[1]
: (pc + 3 + (signed)odv[1]) & ~3;
case c0opc_s32i:
/* 3 operands: value, base, offset. */
gdb_assert (nods == 3 && spreg >= 0 && spreg < C0_NREGS);
+ /* First, check if it's a spill for saved unaligned SP,
+ when dynamic stack adjustment was applied to this frame. */
+ if ((cache->c0.c0_fpalign != 0) /* Dynamic stack adjustment. */
+ && (odv[1] == spreg) /* SP usage indicates spill. */
+ && (odv[0] == cache->c0.c0_old_sp)) /* Old SP register spilled. */
+ cache->c0.c0_sp_ofs = odv[2];
+
if (src[odv[1]].fr_reg == spreg /* Store to stack frame. */
&& (src[odv[1]].fr_ofs & 3) == 0 /* Alignment preserved. */
&& src[odv[0]].fr_reg >= 0 /* Value is from a register. */
dst[src[odv[0]].fr_reg].to_stk = src[odv[1]].fr_ofs + odv[2];
}
break;
+ /* If we end up inside Window Overflow / Underflow interrupt handler
+ report an error because these handlers should have been handled
+ already in a different way. */
+ case c0opc_l32e:
+ case c0opc_s32e:
+ case c0opc_rfwo:
+ case c0opc_rfwu:
+ return 1;
default:
- gdb_assert_not_reached ("unexpected instruction kind");
+ return 1;
}
+ return 0;
}
-/* Analyze prologue of the function at start address to determine if it uses
+/* Analyze prologue of the function at start address to determine if it uses
the Call0 ABI, and if so track register moves and linear modifications
- in the prologue up to the PC or just beyond the prologue, whichever is first.
- An 'entry' instruction indicates non-Call0 ABI and the end of the prologue.
- The prologue may overlap non-prologue instructions but is guaranteed to end
- by the first flow-control instruction (jump, branch, call or return).
- Since an optimized function may move information around and change the
- stack frame arbitrarily during the prologue, the information is guaranteed
- valid only at the point in the function indicated by the PC.
+ in the prologue up to the PC or just beyond the prologue, whichever is
+ first. An 'entry' instruction indicates non-Call0 ABI and the end of the
+ prologue. The prologue may overlap non-prologue instructions but is
+ guaranteed to end by the first flow-control instruction (jump, branch,
+ call or return). Since an optimized function may move information around
+ and change the stack frame arbitrarily during the prologue, the information
+ is guaranteed valid only at the point in the function indicated by the PC.
May be used to skip the prologue or identify the ABI, w/o tracking.
Returns: Address of first instruction after prologue, or PC (whichever
pc Program counter to stop at. Use 0 to continue to end of prologue.
If 0, avoids infinite run-on in corrupt code memory by bounding
the scan to the end of the function if that can be determined.
- nregs Number of general registers to track (size of rt[] array).
+ nregs Number of general registers to track.
InOut args:
- rt[] Array[nregs] of xtensa_c0reg structures for register tracking info.
- If NULL, registers are not tracked.
- Output args:
- call0 If != NULL, *call0 is set non-zero if Call0 ABI used, else 0
- (more accurately, non-zero until 'entry' insn is encountered).
+ cache Xtensa frame cache.
Note that these may produce useful results even if decoding fails
because they begin with default assumptions that analysis may change. */
static CORE_ADDR
call0_analyze_prologue (struct gdbarch *gdbarch,
- CORE_ADDR start, CORE_ADDR pc, CORE_ADDR litbase,
- int nregs, xtensa_c0reg_t rt[], int *call0)
+ CORE_ADDR start, CORE_ADDR pc,
+ int nregs, xtensa_frame_cache_t *cache)
{
CORE_ADDR ia; /* Current insn address in prologue. */
CORE_ADDR ba = 0; /* Current address at base of insn buffer. */
else
body_pc = min (pc, body_pc);
- if (call0 != NULL)
- *call0 = 1;
-
- if (rt != NULL)
- {
- rtmp = (xtensa_c0reg_t*) alloca(nregs * sizeof(xtensa_c0reg_t));
- /* rt is already initialized in xtensa_alloc_frame_cache(). */
- }
- else nregs = 0;
+ cache->call0 = 1;
+ rtmp = (xtensa_c0reg_t*) alloca(nregs * sizeof(xtensa_c0reg_t));
if (!xtensa_default_isa)
xtensa_default_isa = xtensa_isa_init (0, 0);
{
ba = ia;
bt = (ba + XTENSA_ISA_BSZ) < body_pc ? ba + XTENSA_ISA_BSZ : body_pc;
- read_memory (ba, ibuf, bt - ba);
- /* If there is a memory reading error read_memory () will report it
- and then throw an exception, stopping command execution. */
+ if (target_read_memory (ba, ibuf, bt - ba) != 0 )
+ error (_("Unable to read target memory ..."));
}
/* Decode format information. */
register changes do not take effect within this bundle. */
for (j = 0; j < nregs; ++j)
- rtmp[j] = rt[j];
+ rtmp[j] = cache->c0.c0_rt[j];
for (is = 0; is < islots; ++is)
{
goto done;
opc = xtensa_opcode_decode (isa, ifmt, is, slot);
- DEBUGVERB ("[call0_analyze_prologue] instr "
- "addr = 0x%08x, opc = %d\n",
+ DEBUGVERB ("[call0_analyze_prologue] instr addr = 0x%08x, opc = %d\n",
(unsigned)ia, opc);
if (opc == XTENSA_UNDEFINED)
opclass = c0opc_illegal;
case c0opc_uninteresting:
continue;
- case c0opc_flow:
+ case c0opc_flow: /* Flow control instructions stop analysis. */
+ case c0opc_rwxsr: /* RSR, WSR, XSR instructions stop analysis. */
goto done;
case c0opc_entry:
- if (call0 != NULL)
- *call0 = 0;
+ cache->call0 = 0;
ia += ilen; /* Skip over 'entry' insn. */
goto done;
default:
- if (call0 != NULL)
- *call0 = 1;
+ cache->call0 = 1;
}
/* Only expected opcodes should get this far. */
- if (rt == NULL)
- continue;
/* Extract and decode the operands. */
nods = xtensa_opcode_num_operands (isa, opc);
if (opclass == c0opc_mov && nods == 3)
{
if (odv[2] == odv[1])
- nods = 2;
+ {
+ nods = 2;
+ if ((odv[0] == 1) && (odv[1] != 1))
+ /* OR A1, An, An , where n != 1.
+ This means we are inside epilogue already. */
+ goto done;
+ }
else
{
opclass = c0opc_uninteresting;
}
/* Track register movement and modification for this operation. */
- call0_track_op (gdbarch, rt, rtmp, opclass,
- nods, odv, ia, litbase, 1);
+ fail = call0_track_op (gdbarch, cache->c0.c0_rt, rtmp,
+ opclass, nods, odv, ia, 1, cache);
+ if (fail)
+ goto done;
}
}
done:
static void
call0_frame_cache (struct frame_info *this_frame,
- xtensa_frame_cache_t *cache,
- CORE_ADDR pc, CORE_ADDR litbase)
+ xtensa_frame_cache_t *cache, CORE_ADDR pc)
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR start_pc; /* The beginning of the function. */
CORE_ADDR body_pc=UINT_MAX; /* PC, where prologue analysis stopped. */
CORE_ADDR sp, fp, ra;
- int fp_regnum, c0_hasfp, c0_frmsz, prev_sp, to_stk;
+ int fp_regnum = C0_SP, c0_hasfp = 0, c0_frmsz = 0, prev_sp = 0, to_stk;
+ sp = get_frame_register_unsigned
+ (this_frame, gdbarch_tdep (gdbarch)->a0_base + 1);
+ fp = sp; /* Assume FP == SP until proven otherwise. */
+
/* Find the beginning of the prologue of the function containing the PC
and analyze it up to the PC or the end of the prologue. */
if (find_pc_partial_function (pc, NULL, &start_pc, NULL))
{
- body_pc = call0_analyze_prologue (gdbarch, start_pc, pc, litbase,
- C0_NREGS,
- &cache->c0.c0_rt[0],
- &cache->call0);
+ body_pc = call0_analyze_prologue (gdbarch, start_pc, pc, C0_NREGS, cache);
if (body_pc == XTENSA_ISA_BADPC)
- error (_("Xtensa-specific internal error: CALL0 prologue \
-analysis failed in this frame. GDB command execution stopped."));
+ {
+ warning_once ();
+ ra = 0;
+ goto finish_frame_analysis;
+ }
}
- sp = get_frame_register_unsigned
- (this_frame, gdbarch_tdep (gdbarch)->a0_base + 1);
- fp = sp; /* Assume FP == SP until proven otherwise. */
-
/* Get the frame information and FP (if used) at the current PC.
If PC is in the prologue, the prologue analysis is more reliable
- than DWARF info. We don't not know for sure if PC is in the prologue,
- but we know no calls have yet taken place, so we can almost
+ than DWARF info. We don't not know for sure, if PC is in the prologue,
+ but we do know no calls have yet taken place, so we can almost
certainly rely on the prologue analysis. */
if (body_pc <= pc)
start_pc = pc;
}
- prev_sp = fp + c0_frmsz;
+ if (cache->c0.c0_fpalign)
+ {
+ /* This frame has a special prologue with a dynamic stack adjustment
+ to force an alignment, which is bigger than standard 16 bytes. */
+
+ CORE_ADDR unaligned_sp;
+
+ if (cache->c0.c0_old_sp == C0_INEXP)
+ /* This can't be. Prologue code should be consistent.
+ Unaligned stack pointer should be saved in a spare register. */
+ {
+ warning_once ();
+ ra = 0;
+ goto finish_frame_analysis;
+ }
+
+ if (cache->c0.c0_sp_ofs == C0_NOSTK)
+ /* Saved unaligned value of SP is kept in a register. */
+ unaligned_sp = get_frame_register_unsigned
+ (this_frame, gdbarch_tdep (gdbarch)->a0_base + cache->c0.c0_old_sp);
+ else
+ /* Get the value from stack. */
+ unaligned_sp = (CORE_ADDR)
+ read_memory_integer (fp + cache->c0.c0_sp_ofs, 4, byte_order);
+
+ prev_sp = unaligned_sp + c0_frmsz;
+ }
+ else
+ prev_sp = fp + c0_frmsz;
/* Frame size from debug info or prologue tracking does not account for
alloca() and other dynamic allocations. Adjust frame size by FP - SP. */
{
fp = get_frame_register_unsigned (this_frame, fp_regnum);
- /* Recalculate previous SP. */
- prev_sp = fp + c0_frmsz;
/* Update the stack frame size. */
c0_frmsz += fp - sp;
}
else if (cache->c0.c0_rt[C0_RA].fr_reg == C0_CONST
&& cache->c0.c0_rt[C0_RA].fr_ofs == 0)
{
- /* Special case for terminating backtrace at a function that
- wants to be seen as the outermost. Such a function will
- clear it's RA (A0) register to 0 in the prologue instead of
- saving its original value. */
+ /* Special case for terminating backtrace at a function that wants to
+ be seen as the outermost one. Such a function will clear it's RA (A0)
+ register to 0 in the prologue instead of saving its original value. */
ra = 0;
}
else
{
- /* RA was copied to another register or (before any function
- call) may still be in the original RA register. This is not
- always reliable: even in a leaf function, register tracking
- stops after prologue, and even in prologue, non-prologue
- instructions (not tracked) may overwrite RA or any register
- it was copied to. If likely in prologue or before any call,
- use retracking info and hope for the best (compiler should
- have saved RA in stack if not in a leaf function). If not in
- prologue, too bad. */
+ /* RA was copied to another register or (before any function call) may
+ still be in the original RA register. This is not always reliable:
+ even in a leaf function, register tracking stops after prologue, and
+ even in prologue, non-prologue instructions (not tracked) may overwrite
+ RA or any register it was copied to. If likely in prologue or before
+ any call, use retracking info and hope for the best (compiler should
+ have saved RA in stack if not in a leaf function). If not in prologue,
+ too bad. */
int i;
- for (i = 0;
- (i < C0_NREGS) &&
- (i == C0_RA || cache->c0.c0_rt[i].fr_reg != C0_RA);
+ for (i = 0;
+ (i < C0_NREGS)
+ && (i == C0_RA || cache->c0.c0_rt[i].fr_reg != C0_RA);
++i);
if (i >= C0_NREGS && cache->c0.c0_rt[C0_RA].fr_reg == C0_RA)
i = C0_RA;
else ra = 0;
}
+ finish_frame_analysis:
cache->pc = start_pc;
cache->ra = ra;
/* RA == 0 marks the outermost frame. Do not go past it. */
static int a7_was_saved;
static int a11_was_saved;
-/* Simulate L32E insn: AT <-- ref (AS + offset). */
+/* Simulate L32E instruction: AT <-- ref (AS + offset). */
static void
execute_l32e (struct gdbarch *gdbarch, int at, int as, int offset, CORE_ADDR wb)
{
xtensa_write_register (atreg, spilled_value);
}
-/* Simulate S32E insn: AT --> ref (AS + offset). */
+/* Simulate S32E instruction: AT --> ref (AS + offset). */
static void
execute_s32e (struct gdbarch *gdbarch, int at, int as, int offset, CORE_ADDR wb)
{
#define XTENSA_MAX_WINDOW_INTERRUPT_HANDLER_LEN 200
-typedef enum {
+typedef enum
+{
xtWindowOverflow,
xtWindowUnderflow,
xtNoExceptionHandler
} xtensa_exception_handler_t;
-/* Execute insn stream from current PC until hitting RFWU or RFWO.
+/* Execute instruction stream from current PC until hitting RFWU or RFWO.
Return type of Xtensa Window Interrupt Handler on success. */
static xtensa_exception_handler_t
execute_code (struct gdbarch *gdbarch, CORE_ADDR current_pc, CORE_ADDR wb)
void (*func) (struct gdbarch *, int, int, int, CORE_ADDR);
int at, as, offset;
- int num_operands;
/* WindowUnderflow12 = true, when inside _WindowUnderflow12. */
int WindowUnderflow12 = (current_pc & 0x1ff) >= 0x140;
prologue_sal = find_pc_line (start_pc, 0);
if (prologue_sal.line != 0) /* Found debug info. */
{
- /* In Call0, it is possible to have a function with only one instruction
- ('ret') resulting from a 1-line optimized function that does nothing.
- In that case, prologue_sal.end may actually point to the start of the
- next function in the text section, causing a breakpoint to be set at
- the wrong place. Check if the end address is in a different function,
- and if so return the start PC. We know we have symbol info. */
+ /* In Call0, it is possible to have a function with only one instruction
+ ('ret') resulting from a one-line optimized function that does nothing.
+ In that case, prologue_sal.end may actually point to the start of the
+ next function in the text section, causing a breakpoint to be set at
+ the wrong place. Check, if the end address is within a different
+ function, and if so return the start PC. We know we have symbol
+ information. */
CORE_ADDR end_func;
+ if ((gdbarch_tdep (gdbarch)->call_abi == CallAbiCall0Only)
+ && call0_ret (start_pc, prologue_sal.end))
+ return start_pc;
+
find_pc_partial_function (prologue_sal.end, NULL, &end_func, NULL);
if (end_func != start_pc)
return start_pc;
}
/* No debug line info. Analyze prologue for Call0 or simply skip ENTRY. */
- body_pc = call0_analyze_prologue (gdbarch, start_pc, 0, 0, 0, NULL, NULL);
+ body_pc = call0_analyze_prologue (gdbarch, start_pc, 0, 0,
+ xtensa_alloc_frame_cache (0));
return body_pc != 0 ? body_pc : start_pc;
}
/* Verify our configuration. */
xtensa_verify_config (gdbarch);
+ xtensa_session_once_reported = 0;
/* Pseudo-Register read/write. */
set_gdbarch_pseudo_register_read (gdbarch, xtensa_pseudo_register_read);
projects / deliverable / binutils-gdb.git / blobdiff