fi
-gnulib_extra_configure_args=
-# If large-file support is disabled, make sure gnulib does the same.
-if test "$enable_largefile" = no; then
-gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
-fi
-
-# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect
-# to find the the source subdir to be configured directly under
-# gdbserver/. We need to build gnulib under some other directory not
-# "gnulib", to avoid the problem of both GDB and GDBserver wanting to
-# build it in the same directory, when building in the source dir.
-
- in_src="../gnulib"
- in_build="build-gnulib-gdbserver"
- in_extra_args="$gnulib_extra_configure_args"
-
- # Remove --cache-file, --srcdir, and --disable-option-checking arguments
- # so they do not pile up.
- ac_sub_configure_args=
- ac_prev=
- eval "set x $ac_configure_args"
- shift
- for ac_arg
- do
- if test -n "$ac_prev"; then
- ac_prev=
- continue
- fi
- case $ac_arg in
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
- | --c=*)
- ;;
- --config-cache | -C)
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- ;;
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- ;;
- --disable-option-checking)
- ;;
- *)
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
- esac
- done
-
- # Always prepend --prefix to ensure using the same prefix
- # in subdir configurations.
- ac_arg="--prefix=$prefix"
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
- # Pass --silent
- if test "$silent" = yes; then
- ac_sub_configure_args="--silent $ac_sub_configure_args"
- fi
-
- # Always prepend --disable-option-checking to silence warnings, since
- # different subdirs can have different --enable and --with options.
- ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
- ac_popdir=`pwd`
- ac_dir=$in_build
-
- ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
- $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
- $as_echo "$ac_msg" >&6
- as_dir="$ac_dir"; as_fn_mkdir_p
-
- case $srcdir in
- [\\/]* | ?:[\\/]* )
- ac_srcdir=$srcdir/$in_src ;;
- *) # Relative name.
- ac_srcdir=../$srcdir/$in_src ;;
- esac
-
- cd "$ac_dir"
-
- ac_sub_configure=$ac_srcdir/configure
-
- # Make the cache file name correct relative to the subdirectory.
- case $cache_file in
- [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
- *) # Relative name.
- ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
- esac
-
- if test -n "$in_extra_args"; then
- # Add the extra args at the end.
- ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
- # The eval makes quoting arguments work.
- eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
- --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
- as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
- cd "$ac_popdir"
-
-
-
- in_src="../libiberty"
- in_build="build-libiberty-gdbserver"
- in_extra_args=
-
- # Remove --cache-file, --srcdir, and --disable-option-checking arguments
- # so they do not pile up.
- ac_sub_configure_args=
- ac_prev=
- eval "set x $ac_configure_args"
- shift
- for ac_arg
- do
- if test -n "$ac_prev"; then
- ac_prev=
- continue
- fi
- case $ac_arg in
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
- | --c=*)
- ;;
- --config-cache | -C)
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- ;;
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- ;;
- --disable-option-checking)
- ;;
- *)
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
- esac
- done
-
- # Always prepend --prefix to ensure using the same prefix
- # in subdir configurations.
- ac_arg="--prefix=$prefix"
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
- # Pass --silent
- if test "$silent" = yes; then
- ac_sub_configure_args="--silent $ac_sub_configure_args"
- fi
-
- # Always prepend --disable-option-checking to silence warnings, since
- # different subdirs can have different --enable and --with options.
- ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
- ac_popdir=`pwd`
- ac_dir=$in_build
-
- ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
- $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
- $as_echo "$ac_msg" >&6
- as_dir="$ac_dir"; as_fn_mkdir_p
-
- case $srcdir in
- [\\/]* | ?:[\\/]* )
- ac_srcdir=$srcdir/$in_src ;;
- *) # Relative name.
- ac_srcdir=../$srcdir/$in_src ;;
- esac
-
- cd "$ac_dir"
-
- ac_sub_configure=$ac_srcdir/configure
-
- # Make the cache file name correct relative to the subdirectory.
- case $cache_file in
- [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
- *) # Relative name.
- ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
- esac
-
- if test -n "$in_extra_args"; then
- # Add the extra args at the end.
- ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
- # The eval makes quoting arguments work.
- eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
- --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
- as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
- cd "$ac_popdir"
-
-
for ac_header in termios.h sys/reg.h string.h sys/procfs.h linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-GNULIB=build-gnulib-gdbserver/import
+GNULIB=../gnulib/import
GNULIB_STDINT_H=
if test x"$STDINT_H" != x; then
projects / deliverable / binutils-gdb.git / blobdiff