dnl Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.5)dnl
+AC_PREREQ(2.13)
AC_INIT(gprof.c)
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared BFD library],
-[case "${enableval}" in
- yes) shared=true ;;
- no) shared=false ;;
- *bfd*) shared=true ;;
- *) shared=false ;;
-esac])dnl
+AC_CANONICAL_SYSTEM
+AC_ISC_POSIX
+
+changequote(,)dnl
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+changequote([,])dnl
+AM_INIT_AUTOMAKE(gprof, ${BFD_VERSION})
+
+AM_PROG_LIBTOOL
+
+dnl For simplicity, we use the BFD configuration file for most
+dnl things. However, we also need our own configuration file for
+dnl the automake PACKAGE and VERSION macros. We don't name it
+dnl config.h, to avoid any possible confusion with the bfd config.h.
+AM_CONFIG_HEADER(gconfig.h:gconfig.in)
AC_PROG_CC
AC_PROG_INSTALL
-AC_ISC_POSIX
+AC_CHECK_FUNCS(setmode)
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
+ALL_LINGUAS=
+CY_GNU_GETTEXT
-case "${target}" in
-alpha-*-*) MY_TARGET=alpha ;;
-changequote(,)dnl
-i[3456]86-*-*) MY_TARGET=i386 ;;
-changequote([,])dnl
-sparc-*-*) MY_TARGET=sparc ;;
-tahoe-*-*) MY_TARGET=tahoe ;;
-vax-*-*) MY_TARGET=vax ;;
-ns32k-*-*) MY_TARGET=ns532;;
-*-*-*) MY_TARGET=dummy ;;
-esac
+AM_MAINTAINER_MODE
+AC_EXEEXT
-AC_SUBST(MY_TARGET)
+AC_CHECK_HEADERS(sys/gmon_out.h)
-dnl We need to set BSD44_FORMAT on a host which uses the additional
-dnl header fields. This is an attempt to do that. I can't think of a
-dnl good feature test for this.
-case "${target}" in
-*-*-bsd4.4* | *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
- AC_DEFINE(BSD44_FORMAT)
- ;;
-esac
+AC_MSG_CHECKING(the size of gmon pointers)
+AC_TRY_RUN([#include <stdio.h>
+#include <stdlib.h>
+#if HAVE_SYS_GMON_OUT_H
+#include <sys/gmon_out.h>
+#endif
+main()
+{
+#if HAVE_SYS_GMON_OUT_H
+ struct gmon_cg_arc_record arc;
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(arc.from_pc));
+ exit(0);
+#else
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", (int) sizeof(char *));
+ exit(1);
+#endif
+}], gmon_ptr_size=`cat conftestval`, gmon_ptr_size=4, gmon_ptr_size=4)
+AC_MSG_RESULT($gmon_ptr_size)
-BFDLIB='-L../bfd -lbfd'
+AC_DEFINE_UNQUOTED(GMON_PTR_SIZE, $gmon_ptr_size)
-# We need to handle some special cases if BFD was built shared.
-case "${host}" in
- *-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- if test "${shared}" = "true"; then
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- ;;
-alpha*-*-osf*)
- # On Alpha OSF/1, the native linker searches all the -L
- # directories for any LIB.so files, and only then searches for any
- # LIB.a files. That means that if there is an installed
- # libbfd.so, but this build is not done with --enable-shared, the
- # link will wind up being against the install libbfd.so rather
- # than the newly built libbfd. To avoid this, we must explicitly
- # link against libbfd.a when --enable-shared is not used.
- if test "${shared}" != "true"; then
- BFDLIB='../bfd/libbfd.a'
- fi
- ;;
+build_warnings="-W -Wall"
+AC_ARG_ENABLE(build-warnings,
+[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
-AC_SUBST(BFDLIB)
-
-HLDFLAGS=
-HLDENV=
-# If we have shared libraries, try to set rpath reasonably.
-if test "${shared}" = "true"; then
- case "${host}" in
- *-*-hpux*)
- HLDFLAGS='-Wl,+s,+b,$(libdir)'
- ;;
- *-*-irix5*)
- HLDFLAGS='-Wl,-rpath,$(libdir)'
- ;;
- *-*-linux*aout*)
- ;;
- *-*-linux*)
- HLDFLAGS='-Wl,-rpath,$(libdir)'
- ;;
- *-*-solaris*)
- HLDFLAGS='-R $(libdir)'
- ;;
- *-*-sysv4*)
- HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
- ;;
- esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi])dnl
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
fi
+AC_SUBST(WARN_CFLAGS)
-# On SunOS, if the linker supports the -rpath option, use it to
-# prevent ../bfd and ../opcodes from being included in the run time
-# search path.
-case "${host}" in
- *-*-sunos*)
- echo 'main () { }' > conftest.c
- ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
- if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
- :
- elif grep 'No such file' conftest.t >/dev/null 2>&1; then
- :
- elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
- :
- elif test "${shared}" = "true"; then
- HLDFLAGS='-Wl,-rpath=$(libdir)'
- else
- HLDFLAGS='-Wl,-rpath='
- fi
- rm -f conftest.t conftest.c conftest
- ;;
-esac
-AC_SUBST(HLDFLAGS)
-AC_SUBST(HLDENV)
-
-AC_OUTPUT(Makefile)
+AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
+[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])
projects / deliverable / binutils-gdb.git / blobdiff