-*- text -*-
+* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
+
+* Add support for ELF GNU program properties.
+
+* Add support for the Texas Instruments PRU processor.
+
+* When configuring for arc*-*-linux* targets the default linker emulation will
+ change if --with-cpu=nps400 is used at configure time.
+
+* Improve assignment of LMAs to orphan sections in some edge cases where a
+ mixture of both AT>LMA_REGION and AT(LMA) are used.
+
+* Orphan sections placed after an empty section that has an AT(LMA) will now
+ take an load memory address starting from LMA.
+
+* Section groups can now be resolved (the group deleted and the group members
+ placed like normal sections) at partial link time either using the new linker
+ option --force-group-allocation or by placing FORCE_GROUP_ALLOCATION into the
+ linker script.
+
+Changes in 2.28:
+
+* The EXCLUDE_FILE linker script construct can now be applied outside of the
+ section list in order for the exclusions to apply over all input sections in
+ the list.
+
+* Add support for the RISC-V architecture.
+
+* The command line option --no-eh-frame-hdr can now be used in ELF based
+ linkers to disable the automatic generation of .eh_frame_hdr sections.
+
+* Add --in-implib=<infile> to the ARM linker to enable specifying a set of
+ Secure Gateway veneers that must exist in the output import library specified
+ by --out-implib=<outfile> and the address they must have. As such,
+ --in-implib is only supported in combination with --cmse-implib.
+
+* Extended the --out-implib=<file> option, previously restricted to x86 PE
+ targets, to any ELF based target. This allows the generation of an import
+ library for an ELF executable, which can then be used by another application
+ to link against the executable.
+
+Changes in 2.27:
+
+* Add a configure option --enable-relro to decide whether -z relro should
+ be enabled in ELF linker by default. Default to yes for all Linux
+ targets except FRV, HPPA, IA64 and MIPS.
+
+* Support for -z noreloc-overflow in the x86-64 ELF linker to disable
+ relocation overflow check.
+
+* Add -z common/-z nocommon options for ELF targets to control whether to
+ convert common symbols to the STT_COMMON type during a relocatable link.
+
+* Support for -z nodynamic-undefined-weak in the x86 ELF linker, which
+ avoids dynamic relocations against undefined weak symbols in executable.
+
+* The NOCROSSREFSTO command was added to the linker script language.
+
+* Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply link-time
+ values for dynamic relocations.
+
+Changes in 2.26:
+
+* Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time
+ workaround for a bug in the bus matrix / memory controller for some of
+ the STM32 Cortex-M4 based products (STM32L4xx)
+
+* Add a configure option --enable-compressed-debug-sections={all,ld} to
+ decide whether DWARF debug sections should be compressed by default.
+
+* Add support for the ARC EM/HS, and ARC600/700 architectures.
+
+* Experimental support for linker garbage collection (--gc-sections)
+ has been enabled for COFF and PE based targets.
+
+* New command line option for ELF targets to compress DWARF debug
+ sections, --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
+
+* New command line option, --orphan-handling=[place|warn|error|discard], to
+ adjust how orphan sections are handled. The default is 'place' which gives
+ the current behaviour, 'warn' and 'error' issue a warning or error
+ respectively when orphan sections are found, and 'discard' will discard all
+ orphan sections.
+
+* Add support for LLVM plugin.
+
+* Add --print-memory-usage option to report memory blocks usage.
+
+* Add --require-defined option, it's like --undefined except the new symbol
+ must be defined by the end of the link.
+
+Changes in 2.25:
+
+* PE binaries now once again contain real timestamps by default. To disable
+ the inclusion of a timestamp in a PE binary, use the --no-insert-timestamp
+ command line option.
+
+* Replace support for openrisc and or32 with support for or1k.
+
+* Add support for the --build-id command line option to COFF based targets.
+
+* x86/x86_64 pe-coff now supports the --build-id option.
+
+* Add support for the Andes NDS32.
+
+Changes in 2.24:
+
+* Add LOG2CEIL() builtin function to the linker script language
+
+* Add support for the Texas Instruments MSP430X processor.
+
+* Add support for Altera Nios II.
+
+* Add support for the V850E3V5 architecture.
+
+* Add support for the Imagination Technologies Meta processor.
+
+* --enable-new-dtags no longer generates old dtags in addition to new dtags.
+
+* Remove linker support for MIPS ECOFF targets.
+
+* Add ALIGN_WITH_INPUT to the linker script language to force the alignment of
+ an output section to use the maximum alignment of all its input sections.
+
+Changes in 2.23:
+
+* Enable compressed debug section feature for x86/x86_64 pe-coff.
+
+* Add support for the 64-bit ARM architecture: AArch64.
+
+* Added SORT_NONE to the linker script language to disable section sorting.
+
+* Add a linker-provided symbol when producing ELF output, '__ehdr_start'
+ to point to the ELF file header (and nearby program headers) in the
+ program's memory image.
+
+* Add support for S12X processor.
+
+* Add support for the VLE extension to the PowerPC architecture.
+
+* Add support for the Freescale XGATE architecture.
+
+* Add option -f FILE on AIX (for response file).
+
+* Add support for the Renesas RL78 architecture.
+
+* Add support for the Adapteva EPIPHANY architecture.
+
+Changes in 2.22:
+
+* --copy-dt-needed-entries is no longer enabled by default. Instead
+ --no-copy-dt-needed-entries is the default.
+
+* INPUT_SECTION_FLAGS has been added to the linker script language
+ to allow selection of input sections by section header section flags.
+
+* Add support for the Tilera TILEPro and TILE-Gx architectures.
+
+* Added SORT_BY_INIT_PRIORITY to the linker script language to permit
+ sorting sections by numerical value of the GCC init_priority attribute
+ encoded in the section name.
+
+Changes in 2.21:
+
+* Linker script expression evaluation is somewhat more sane. This may
+ break scripts that depend on quirks of the old expression evaluation.
+
* Turn off underscoring for x86_64 PE+-COFF targets. For old behavior the
option --enable-leading-mingw64-underscores can be used on configure of
bfd.
* Extend .def file syntax by '== <ID>' for imports and exports. This allows
to alias the import/export table name written in PE image.
-* Add --exlcude-all-symbols option to PE based linkers. This prevents all
+* Add --exclude-all-symbols option to PE based linkers. This prevents all
symbols from automatically being exported.
* Add support for the Renesas RX processor.
+* Add support for alpha-vms target.
+
Changes in 2.20:
* GNU/Linux targets now support the STB_GNU_UNIQUE symbol binding. This is a
* Add support for Lattice Mico32 (lm32) architecture.
-* Add CR16 ELF --embedded-relocs (used to embedded relocations into binaries
+* Add CR16 ELF --embedded-relocs (used to embedded relocations into binaries
for Embedded-PIC code) option.
* Add to the PE/PE+ targets the support of two different kinds of
other utilities should work on Risc/Ultrix and Irix.
\f
+Copyright (C) 2012-2017 Free Software Foundation, Inc.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.
+
Local variables:
fill-column: 79
End:
projects / deliverable / binutils-gdb.git / blobdiff