# NOP - four byte opcode for no-op (defaults to 0)
# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
# empty.
+# SMALL_DATA_CTOR - .ctors contains small data.
+# SMALL_DATA_DTOR - .dtors contains small data.
# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
# INITIAL_READONLY_SECTIONS - at start of text segment
# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
+# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
+# (e.g. PPC32 .fixup, .got[12])
# OTHER_BSS_SECTIONS - other than .bss .sbss ...
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
+# TEXT_START_ADDR - the first byte of the text segment, after any
+# headers.
+# TEXT_BASE_ADDRESS - the first byte of the text segment.
# TEXT_START_SYMBOLS - symbols that appear at the start of the
# .text section.
# DATA_START_SYMBOLS - symbols that appear at the start of the
# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
# .bss section besides __bss_start.
# DATA_PLT - .plt should be in data segment, not text segment.
+# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
# BSS_PLT - .plt should be in bss segment
# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
# EMBEDDED - whether this is for an embedded system.
# combination of .fini sections.
# STACK_ADDR - start of a .stack section.
# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
+# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
+# so that .got can be in the RELRO area. It should be set to
+# the number of bytes in the beginning of .got.plt which can be
+# in the RELRO area as well.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-test -n "$CREATE_SHLIB" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
-test -z "$CREATE_SHLIB" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+DATA_SEGMENT_RELRO_END=""
+DATA_SEGMENT_RELRO_GOTPLT_END=""
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
+ if test -n "${SEPARATE_GOTPLT}"; then
+ DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
+ else
+ DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
+ fi
fi
INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+if test -z "$GOT"; then
+ if test -z "$SEPARATE_GOTPLT"; then
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
+ else
+ GOT=".got ${RELOCATING-0} : { *(.got) }"
+ GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
+ .got.plt ${RELOCATING-0} : { *(.got.plt) }"
+ fi
+fi
DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
if test -z "${NO_SMALL_DATA}"; then
SBSS=".sbss ${RELOCATING-0} :
{
- ${RELOCATING+PROVIDE (__sbss_start = .);}
- ${RELOCATING+PROVIDE (___sbss_start = .);}
+ ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
*(.dynsbss)
*(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
*(.scommon)
- ${RELOCATING+PROVIDE (__sbss_end = .);}
- ${RELOCATING+PROVIDE (___sbss_end = .);}
}"
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
.sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
+ ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
.rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
.rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+else
+ NO_SMALL_DATA=" "
fi
+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
SECTIONS
{
/* Read-only sections, merged into text segment: */
- ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}}
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
${CREATE_SHLIB-${INTERP}}
.rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
.rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
.rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
.rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
.rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
+ KEEP (*(.text.*personality*))
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
- ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
- .preinit_array ${RELOCATING-0} : { *(.preinit_array) }
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
+ /* Exception handling */
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+
+ /* Thread Local Storage sections */
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+
+ .preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
+ .init_array ${RELOCATING-0} : { KEEP (*(.init_array)) }
+ .fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) }
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
- .init_array ${RELOCATING-0} : { *(.init_array) }
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
+ ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
+
+ ${RELOCATING+${DATARELRO}}
+ ${OTHER_RELRO_SECTIONS}
+ ${TEXT_DYNAMIC-${DYNAMIC}}
+ ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
+ ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
- .fini_array ${RELOCATING-0} : { *(.fini_array) }
- ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
+ ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
.data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
+ KEEP (*(.gnu.linkonce.d.*personality*))
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
- .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
- .eh_frame ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
- .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
- ${TEXT_DYNAMIC-${DYNAMIC}}
- ${RELOCATING+${CTOR}}
- ${RELOCATING+${DTOR}}
- .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
- ${DATA_PLT+${PLT}}
+ ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
+ ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ ${NO_SMALL_DATA-${GOT}}
${OTHER_GOT_SECTIONS}
- ${CREATE_SHLIB+${SDATA2}}
- ${CREATE_SHLIB+${SBSS2}}
${SDATA}
${OTHER_SDATA_SECTIONS}
${RELOCATING+_edata = .;}
projects / deliverable / binutils-gdb.git / blobdiff