ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --with-target-subdir=SUBDIR Configuring in a subdirectory"
+ --with-target-subdir=SUBDIR Configuring in a subdirectory for target"
+ac_help="$ac_help
+ --with-build-subdir=SUBDIR Configuring in a subdirectory for build"
ac_help="$ac_help
--with-cross-host=HOST Configuring with a cross compiler"
ac_help="$ac_help
--with-newlib Configuring with newlib"
+ac_help="$ac_help
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-install-libiberty Install headers for end users"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=pexecute.c
+ac_unique_file=xmalloc.c
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported. We don't use libtool yet, but some day we might, so...
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
# Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir"
:
fi
+# Check whether --with-build-subdir or --without-build-subdir was given.
+if test "${with_build_subdir+set}" = set; then
+ withval="$with_build_subdir"
+ :
+fi
+
# Check whether --with-cross-host or --without-cross-host was given.
if test "${with_cross_host+set}" = set; then
withval="$with_cross_host"
if test "${srcdir}" = "."; then
- if test -z "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}"; then
+ libiberty_topdir="${srcdir}/../.."
+ with_target_subdir=
+ elif test -z "${with_target_subdir}"; then
libiberty_topdir="${srcdir}/.."
else
if test "${with_target_subdir}" != "."; then
else
libiberty_topdir="${srcdir}/.."
fi
+
ac_aux_dir=
for ac_dir in $libiberty_topdir $srcdir/$libiberty_topdir; do
if test -f $ac_dir/install-sh; then
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:610: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ maintainer_mode=$enableval
+else
+ maintainer_mode=no
+fi
+
+
+echo "$ac_t""$maintainer_mode" 1>&6
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+ NOTMAINT='#'
+else
+ MAINT='#'
+ NOTMAINT=''
+fi
+
+# Do we have a single-tree copy of texinfo? Even if we do, we can't
+# rely on it - libiberty is built before texinfo.
+# Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:635: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "x$MAKEINFO" = "x"; then
+ MAKEINFO="@echo makeinfo missing; true"
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+ case x"`$MAKEINFO --version | grep 'GNU texinfo'`" in
+ x*\ [1-3].* )
+ MAKEINFO="@echo $MAKEINFO is too old, 4.0 or newer required; true"
+ BUILD_INFO=
+ echo "configure: warning:
+*** Makeinfo is too old. Info documentation will not be built." 1>&2
+ ;;
+ esac
+fi
+
+
+
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:681: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$PERL"; then
+ ac_cv_prog_PERL="$PERL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_PERL="perl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+PERL="$ac_cv_prog_PERL"
+if test -n "$PERL"; then
+ echo "$ac_t""$PERL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test x"$PERL" = x""; then
+ HAVE_PERL='#'
+else
+ HAVE_PERL=''
+fi
+
+
+
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:591: checking host system type" >&5
+echo "configure:721: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:614: checking build system type" >&5
+echo "configure:744: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:640: checking for $ac_word" >&5
+echo "configure:770: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:672: checking for $ac_word" >&5
+echo "configure:802: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:704: checking for $ac_word" >&5
+echo "configure:834: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-# FIXME: We temporarily define our own version of AC_PROG_CC. This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable. This should really be fixed in autoconf
-# itself.
-
-
-
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:750: checking for $ac_word" >&5
+echo "configure:871: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:780: checking for $ac_word" >&5
+echo "configure:901: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:829: checking whether we are using GNU C" >&5
+echo "configure:950: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:959: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:854: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:975: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+
+if test "x$CC" != xcc; then
+ echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
+echo "configure:1007: checking whether $CC and cc understand -c and -o together" >&5
+else
+ echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
+echo "configure:1010: checking whether cc understands -c and -o together" >&5
+fi
+set dummy $CC; ac_cc="`echo $2 |
+ sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
+if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'foo(){}' > conftest.c
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
+if { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ ac_try='cc -c conftest.c -o conftest.o 1>&5'
+ if { (eval echo configure:1030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1031: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ cat >> confdefs.h <<\EOF
+#define NO_MINUS_C_MINUS_O 1
+EOF
+
+fi
+
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+ NO_MINUS_C_MINUS_O=yes
+else
+ OUTPUT_OPTION='-o $@'
+fi
+
+
+
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:884: checking for POSIXized ISC" >&5
+echo "configure:1067: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
ISC=
fi
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:1088: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1093 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1163: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1170 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1177: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:1203: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 1210 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1221: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 1225 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1236: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_bigendian=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+ echo $ac_n "cross-compiling... " 2>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1256 "configure"
+#include "confdefs.h"
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:1269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_bigendian=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = unknown; then
+echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
+echo "configure:1287: checking to probe for byte ordering" >&5
+
+cat >conftest.c <<EOF
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
+int main() { _ascii (); _ebcdic (); return 0; }
+EOF
+ if test -f conftest.c ; then
+ if ${CC-cc} ${CFLAGS} conftest.c -o conftest.o && test -f conftest.o ; then
+ if test `grep -l BIGenDianSyS conftest.o` ; then
+ echo $ac_n ' big endian probe OK, ' 1>&6
+ ac_cv_c_bigendian=yes
+ fi
+ if test `grep -l LiTTleEnDian conftest.o` ; then
+ echo $ac_n ' little endian probe OK, ' 1>&6
+ if test $ac_cv_c_bigendian = yes ; then
+ ac_cv_c_bigendian=unknown;
+ else
+ ac_cv_c_bigendian=no
+ fi
+ fi
+ echo $ac_n 'guessing bigendian ... ' >&6
+ fi
+ fi
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+fi
+if test $ac_cv_c_bigendian = yes; then
+ cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HOST_WORDS_BIG_ENDIAN 1
+EOF
+
+ BYTEORDER=4321
+else
+ BYTEORDER=1234
+fi
+cat >> confdefs.h <<EOF
+#define BYTEORDER $BYTEORDER
+EOF
+
+if test $ac_cv_c_bigendian = unknown; then
+ { echo "configure: error: unknown endianess - sorry" 1>&2; exit 1; }
+fi
+
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:922: checking for a BSD compatible install" >&5
+echo "configure:1356: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# able to link anything, it had better be able to at least compile
# something.
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:983: checking how to run the C preprocessor" >&5
+echo "configure:1417: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 998 "configure"
+#line 1432 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1004: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1438: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1015 "configure"
+#line 1449 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1455: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1032 "configure"
+#line 1466 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1038: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
echo "$ac_t""$CPP" 1>&6
-for ac_hdr in sys/file.h sys/param.h stdlib.h string.h unistd.h strings.h sys/time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h
+for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h alloca.h sys/pstat.h sys/sysmp.h sys/sysinfo.h machine/hal_sysinfo.h sys/table.h sys/sysctl.h sys/systemcfg.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1066: checking for $ac_hdr" >&5
+echo "configure:1500: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1071 "configure"
+#line 1505 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1076: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1103: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1537: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1108 "configure"
+#line 1542 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1124: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1558: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
+echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
+echo "configure:1579: checking whether time.h and sys/time.h may both be included" >&5
+if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1584 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+int main() {
+struct tm *tp;
+; return 0; }
+EOF
+if { (eval echo configure:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_header_time=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_time=no
+fi
+rm -f conftest*
+fi
-# This is the list of functions which libiberty will provide if they
-# are not available on the host.
+echo "$ac_t""$ac_cv_header_time" 1>&6
+if test $ac_cv_header_time = yes; then
+ cat >> confdefs.h <<\EOF
+#define TIME_WITH_SYS_TIME 1
+EOF
-funcs="asprintf"
-funcs="$funcs atexit"
-funcs="$funcs basename"
-funcs="$funcs bcmp"
-funcs="$funcs bcopy"
-funcs="$funcs bzero"
-funcs="$funcs calloc"
-funcs="$funcs clock"
-funcs="$funcs getcwd"
-funcs="$funcs getpagesize"
-funcs="$funcs index"
-funcs="$funcs insque"
-funcs="$funcs memchr"
-funcs="$funcs memcmp"
-funcs="$funcs memcpy"
-funcs="$funcs memmove"
-funcs="$funcs memset"
-funcs="$funcs mkstemps"
-funcs="$funcs putenv"
-funcs="$funcs random"
-funcs="$funcs rename"
-funcs="$funcs rindex"
-funcs="$funcs setenv"
-funcs="$funcs sigsetmask"
-funcs="$funcs strcasecmp"
-funcs="$funcs strchr"
-funcs="$funcs strdup"
-funcs="$funcs strncasecmp"
-funcs="$funcs strrchr"
-funcs="$funcs strstr"
-funcs="$funcs strtod"
-funcs="$funcs strtol"
-funcs="$funcs strtoul"
-funcs="$funcs tmpnam"
-funcs="$funcs vasprintf"
-funcs="$funcs vfprintf"
-funcs="$funcs vprintf"
-funcs="$funcs vsprintf"
-funcs="$funcs waitpid"
-
-# Also in the old function.def file: alloca, vfork, getopt.
+fi
-vars="sys_errlist sys_nerr sys_siglist"
-checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday"
-
-# These are neither executed nor required, but they help keep
-# autoheader happy without adding a bunch of text to acconfig.h.
-if test "x" = "y"; then
- for ac_func in asprintf atexit basename bcmp bcopy bzero calloc clock getcwd
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1200: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+echo $ac_n "checking whether errno must be declared""... $ac_c" 1>&6
+echo "configure:1615: checking whether errno must be declared" >&5
+if eval "test \"`echo '$''{'libiberty_cv_declare_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1205 "configure"
+#line 1620 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
+#include <errno.h>
int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
+int x = errno;
; return 0; }
EOF
-if { (eval echo configure:1228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ libiberty_cv_declare_errno=no
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ libiberty_cv_declare_errno=yes
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+echo "$ac_t""$libiberty_cv_declare_errno" 1>&6
+if test $libiberty_cv_declare_errno = yes
+then cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_ERRNO 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
+
fi
-done
- for ac_func in getpagesize index insque mkstemps memchr memcmp memcpy memmove
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1255: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1649: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1260 "configure"
+#line 1654 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
EOF
-if { (eval echo configure:1283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ ac_cv_header_stdc=yes
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ ac_cv_header_stdc=no
fi
rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1679 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
fi
+rm -f conftest*
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1697 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
EOF
-
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
else
- echo "$ac_t""no" 1>&6
+ rm -rf conftest*
+ ac_cv_header_stdc=no
fi
-done
+rm -f conftest*
- for ac_func in memset putenv random rename rindex sigsetmask strcasecmp
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1310: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
else
cat > conftest.$ac_ext <<EOF
-#line 1315 "configure"
+#line 1718 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
-; return 0; }
EOF
-if { (eval echo configure:1338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+if { (eval echo configure:1729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ rm -fr conftest*
+ ac_cv_header_stdc=no
fi
-rm -f conftest*
+rm -fr conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
+
fi
-done
- for ac_func in setenv strchr strdup strncasecmp strrchr strstr strtod strtol
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1365: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+echo $ac_n "checking for uintptr_t""... $ac_c" 1>&6
+echo "configure:1753: checking for uintptr_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uintptr_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1370 "configure"
+#line 1758 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
#endif
-
-; return 0; }
EOF
-if { (eval echo configure:1393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])uintptr_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ ac_cv_type_uintptr_t=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ ac_cv_type_uintptr_t=no
fi
rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+fi
+echo "$ac_t""$ac_cv_type_uintptr_t" 1>&6
+if test $ac_cv_type_uintptr_t = no; then
+ cat >> confdefs.h <<\EOF
+#define uintptr_t unsigned long
EOF
-
-else
- echo "$ac_t""no" 1>&6
+
fi
-done
- for ac_func in strtoul tmpnam vasprintf vfprintf vprintf vsprintf waitpid
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1420: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+# Given the above check, we always have uintptr_t or a fallback
+# definition. So define HAVE_UINTPTR_T in case any imported code
+# relies on it.
+cat >> confdefs.h <<\EOF
+#define HAVE_UINTPTR_T 1
+EOF
+
+
+echo $ac_n "checking for pid_t""... $ac_c" 1>&6
+echo "configure:1794: checking for pid_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1425 "configure"
+#line 1799 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
#endif
-
-; return 0; }
EOF
-if { (eval echo configure:1448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ ac_cv_type_pid_t=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ ac_cv_type_pid_t=no
fi
rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
fi
-done
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
-
+echo "$ac_t""$ac_cv_type_pid_t" 1>&6
+if test $ac_cv_type_pid_t = no; then
cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
+#define pid_t int
EOF
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_SIGLIST 1
-EOF
+fi
- for ac_func in getrusage on_exit psignal strerror strsignal sysconf times
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1487: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1492 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-int main() {
+# This is the list of functions which libiberty will provide if they
+# are not available on the host.
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
+funcs="asprintf"
+funcs="$funcs atexit"
+funcs="$funcs basename"
+funcs="$funcs bcmp"
+funcs="$funcs bcopy"
+funcs="$funcs bsearch"
+funcs="$funcs bzero"
+funcs="$funcs calloc"
+funcs="$funcs clock"
+funcs="$funcs ffs"
+funcs="$funcs getcwd"
+funcs="$funcs getpagesize"
+funcs="$funcs index"
+funcs="$funcs insque"
+funcs="$funcs memchr"
+funcs="$funcs memcmp"
+funcs="$funcs memcpy"
+funcs="$funcs memmove"
+funcs="$funcs mempcpy"
+funcs="$funcs memset"
+funcs="$funcs mkstemps"
+funcs="$funcs putenv"
+funcs="$funcs random"
+funcs="$funcs rename"
+funcs="$funcs rindex"
+funcs="$funcs setenv"
+funcs="$funcs snprintf"
+funcs="$funcs sigsetmask"
+funcs="$funcs stpcpy"
+funcs="$funcs stpncpy"
+funcs="$funcs strcasecmp"
+funcs="$funcs strchr"
+funcs="$funcs strdup"
+funcs="$funcs strncasecmp"
+funcs="$funcs strrchr"
+funcs="$funcs strstr"
+funcs="$funcs strtod"
+funcs="$funcs strtol"
+funcs="$funcs strtoul"
+funcs="$funcs tmpnam"
+funcs="$funcs vasprintf"
+funcs="$funcs vfprintf"
+funcs="$funcs vprintf"
+funcs="$funcs vsnprintf"
+funcs="$funcs vsprintf"
+funcs="$funcs waitpid"
-; return 0; }
-EOF
-if { (eval echo configure:1515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
+# Also in the old function.def file: alloca, vfork, getopt.
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
+vars="sys_errlist sys_nerr sys_siglist _system_configuration"
+
+checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday"
+checkfuncs="$checkfuncs realpath canonicalize_file_name pstat_getstatic pstat_getdynamic sysmp"
+checkfuncs="$checkfuncs getsysinfo table sysctl"
- for ac_func in sbrk gettimeofday
+# These are neither executed nor required, but they help keep
+# autoheader happy without adding a bunch of text to acconfig.h.
+if test "x" = "y"; then
+ for ac_func in asprintf atexit basename bcmp bcopy bsearch bzero calloc clock \
+ getcwd getpagesize index insque mkstemps memchr memcmp memcpy \
+ memmove mempcpy memset putenv random rename rindex sigsetmask \
+ strcasecmp setenv stpcpy stpncpy strchr strdup strncasecmp strrchr strstr \
+ strtod strtol strtoul tmpnam vasprintf vfprintf vprintf \
+ vsprintf waitpid getrusage on_exit psignal strerror strsignal \
+ sysconf times sbrk gettimeofday ffs snprintf vsnprintf \
+ pstat_getstatic pstat_getdynamic sysmp getsysinfo table sysctl \
+ realpath canonicalize_file_name
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1542: checking for $ac_func" >&5
+echo "configure:1899: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1547 "configure"
+#line 1904 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_ERRLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_NERR 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_SIGLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE__SYSTEM_CONFIGURATION 1
+EOF
+
fi
# For each of these functions, if the host does not provide the
# function we want to put FN.o in LIBOBJS, and if the host does
-# provide the function, we want to define HAVE_FN in config.h. Also,
-# if the host does not provide alloca, we set ALLOCA to alloca.o
+# provide the function, we want to define HAVE_FN in config.h.
setobjs=
CHECK=
+target_header_dir=
if test -n "${with_target_subdir}"; then
# We are being configured as a target library. AC_REPLACE_FUNCS
# newlib provide and which ones we will be expected to provide.
if test "x${with_newlib}" = "xyes"; then
- ALLOCA="alloca.o"
LIBOBJS="asprintf.o basename.o insque.o random.o strdup.o vasprintf.o"
for f in $funcs; do
fi
+ # We may wish to install the target headers somewhere.
+ # Check whether --enable-install-libiberty or --disable-install-libiberty was given.
+if test "${enable_install_libiberty+set}" = set; then
+ enableval="$enable_install_libiberty"
+ enable_install_libiberty=$enableval
+else
+ enable_install_libiberty=no
+fi
+
+ # Option parsed, now set things appropriately.
+ case x"$enable_install_libiberty" in
+ xyes|x)
+ target_header_dir=libiberty
+ ;;
+ xno)
+ target_header_dir=
+ ;;
+ *)
+ # This could be sanity-checked in various ways...
+ target_header_dir="${enable_install_libiberty}"
+ ;;
+ esac
+
+
else
# Not a target library, so we set things up to run the test suite.
+
+case "${host}" in
+ *-*-cygwin* | *-*-mingw*)
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_ERRLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_NERR 1
+EOF
+
+ ;;
+esac
+
if test -z "${setobjs}"; then
case "${host}" in
# provides from our shell variables, so that they appear to be
# missing.
- funcs="`echo $funcs | sed -e 's/random//'`"
- LIBOBJS="$LIBOBJS random.o"
- vars="`echo $vars | sed -e 's/sys_siglist//'`"
- checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`"
+ # DJ - only if we're *building* cygwin, not just building *with* cygwin
+
+ if test -n "${with_target_subdir}"
+ then
+ funcs="`echo $funcs | sed -e 's/random//'`"
+ LIBOBJS="$LIBOBJS random.o"
+ vars="`echo $vars | sed -e 's/sys_siglist//'`"
+ checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`"
+ fi
;;
*-*-mingw32*)
# Under mingw32, sys_nerr and sys_errlist exist, but they are
# macros, so the test below won't find them.
- vars="`echo $vars | sed -e 's/sys_nerr//' -e 's/sys_errlist//'`"
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
-
+ libiberty_cv_var_sys_nerr=yes
+ libiberty_cv_var_sys_errlist=yes
;;
*-*-uwin*)
# Under uwin 2.0+, sys_nerr and sys_errlist exist, but they are
# macros (actually, these are imported from a DLL, but the end effect
# is the same), so the test below won't find them.
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
+ libiberty_cv_var_sys_nerr=yes
+ libiberty_cv_var_sys_errlist=yes
+ ;;
+ *-*-*vms*)
+ # Under VMS, vfork works very different than on Unix. The standard test
+ # won't work, and it isn't easily adaptable. It makes more sense to
+ # just force it.
+ ac_cv_func_vfork_works=yes
;;
esac
# We haven't set the list of objects yet. Use the standard autoconf
# tests. This will only work if the compiler works.
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1752: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2161: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1763 "configure"
+#line 2172 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1794: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2203: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
for ac_func in $funcs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1801: checking for $ac_func" >&5
+echo "configure:2210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1806 "configure"
+#line 2215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
-
- case "${host}" in
- *-*-interix)
- # On Interix, it wrongly concludes that the MSVC compiler supports alloca.
- # (MSVC does on Win32, not on Interix.)
- # This should be temporary.
-
- ac_cv_header_alloca_h=no
- ac_cv_func_alloca_works=no
- ALLOCA=alloca.o
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
-EOF
- cat >> confdefs.h <<EOF
-#define STACK_DIRECTION -1
-EOF
- ;;
- *)
- # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1876: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1881 "configure"
-#include "confdefs.h"
-#include <alloca.h>
-int main() {
-char *p = alloca(2 * sizeof(int));
-; return 0; }
-EOF
-if { (eval echo configure:1888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_header_alloca_h=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_alloca_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA_H 1
-EOF
-
-fi
-
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1909: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1914 "configure"
-#include "confdefs.h"
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-# endif
-# endif
-# endif
-# endif
-#endif
-
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:1942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_alloca_works=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_alloca_works=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
-if test $ac_cv_func_alloca_works = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
-
-fi
-
-if test $ac_cv_func_alloca_works = no; then
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
- # that cause trouble. Some versions do not even contain alloca or
- # contain a buggy version. If you still want to use their alloca,
- # use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.${ac_objext}
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
-EOF
-
-
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1974: checking whether alloca needs Cray hooks" >&5
+ echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:2265: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1979 "configure"
+#line 2270 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2004: checking for $ac_func" >&5
+ for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2295: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2009 "configure"
+#line 2300 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:2032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<EOF
-#define CRAY_STACKSEG_END $ac_func
-EOF
-
- break
-else
- echo "$ac_t""no" 1>&6
-fi
-
-done
-fi
-
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2059: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_c_stack_direction=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 2067 "configure"
-#include "confdefs.h"
-find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}
-EOF
-if { (eval echo configure:2086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_stack_direction=1
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_stack_direction=-1
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-EOF
-
-fi
-
- ;;
- esac
-
- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2111: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2124: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2141 "configure"
-#include "confdefs.h"
-#include <string.h>
+$ac_func();
+#endif
+
+; return 0; }
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
+if { (eval echo configure:2323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_header_stdc=no
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2159 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
+ break
else
- rm -rf conftest*
- ac_cv_header_stdc=no
+ echo "$ac_t""no" 1>&6
fi
-rm -f conftest*
+ done
fi
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:2349: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2180 "configure"
+#line 2357 "configure"
#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
+}
EOF
-if { (eval echo configure:2191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
- :
+ ac_cv_c_stack_direction=1
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_header_stdc=no
+ ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi
fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2215: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2220 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_pid_t=yes
-else
- rm -rf conftest*
- ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
- cat >> confdefs.h <<\EOF
-#define pid_t int
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF
-fi
-ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
+ ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2249: checking for vfork.h" >&5
+echo "configure:2398: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2254 "configure"
+#line 2403 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2259: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2408: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2284: checking for working vfork" >&5
+echo "configure:2433: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2290: checking for vfork" >&5
+echo "configure:2439: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2295 "configure"
+#line 2444 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2340 "configure"
+#line 2489 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
if test $ac_cv_func_vfork_works = no; then
LIBOBJS="$LIBOBJS vfork.o"
fi
+ # We only need _doprnt if we might use it to implement v*printf.
+ if test $ac_cv_func_vprintf != yes \
+ || test $ac_cv_func_vfprintf != yes \
+ || test $ac_cv_func_vsprintf != yes; then
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2616: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2621 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
+fi
+done
+
+
+ else
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2674: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2679 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+
for v in $vars; do
echo $ac_n "checking for $v""... $ac_c" 1>&6
-echo "configure:2462: checking for $v" >&5
+echo "configure:2730: checking for $v" >&5
if eval "test \"`echo '$''{'libiberty_cv_var_$v'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2467 "configure"
+#line 2735 "configure"
#include "confdefs.h"
int *p;
int main() {
-extern int $v; p = &$v;
+extern int $v []; p = $v;
; return 0; }
EOF
-if { (eval echo configure:2474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "libiberty_cv_var_$v=yes"
else
for ac_func in $checkfuncs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2500: checking for $ac_func" >&5
+echo "configure:2768: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2505 "configure"
+#line 2773 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
+ echo $ac_n "checking whether canonicalize_file_name must be declared""... $ac_c" 1>&6
+echo "configure:2821: checking whether canonicalize_file_name must be declared" >&5
+if eval "test \"`echo '$''{'libiberty_cv_decl_needed_canonicalize_file_name'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2826 "configure"
+#include "confdefs.h"
+
+#include "confdefs.h"
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) canonicalize_file_name
+; return 0; }
+EOF
+if { (eval echo configure:2848: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ libiberty_cv_decl_needed_canonicalize_file_name=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ libiberty_cv_decl_needed_canonicalize_file_name=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$libiberty_cv_decl_needed_canonicalize_file_name" 1>&6
+if test $libiberty_cv_decl_needed_canonicalize_file_name = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_CANONICALIZE_FILE_NAME 1
+EOF
+
fi
+fi
+
+# Figure out which version of pexecute to use.
+case "${host}" in
+ *-*-mingw* | *-*-winnt*) pexecute=pex-win32.o ;;
+ *-*-msdosdjgpp*) pexecute=pex-djgpp.o ;;
+ *-*-msdos*) pexecute=pex-msdos.o ;;
+ *-*-os2-emx*) pexecute=pex-os2.o ;;
+ *) pexecute=pex-unix.o ;;
+esac
+
+
for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2558: checking for $ac_hdr" >&5
+echo "configure:2884: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2563 "configure"
+#line 2889 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2597: checking for $ac_func" >&5
+echo "configure:2923: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2602 "configure"
+#line 2928 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2650: checking for working mmap" >&5
+echo "configure:2976: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2658 "configure"
+#line 2984 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2798: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
echo $ac_n "checking for working strncmp""... $ac_c" 1>&6
-echo "configure:2822: checking for working strncmp" >&5
+echo "configure:3148: checking for working strncmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_strncmp_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_strncmp_works=no
else
cat > conftest.$ac_ext <<EOF
-#line 2830 "configure"
+#line 3156 "configure"
#include "confdefs.h"
/* Test by Jim Wilson and Kaveh Ghazi.
p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, dev_zero, 0);
+ if (p == (char *)-1)
+ p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
+ MAP_ANON|MAP_PRIVATE, -1, 0);
if (p == (char *)-1)
exit (2);
else
}
EOF
-if { (eval echo configure:2891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_strncmp_works=yes
else
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@libiberty_topdir@%$libiberty_topdir%g
+s%@MAINT@%$MAINT%g
+s%@NOTMAINT@%$NOTMAINT%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@BUILD_INFO@%$BUILD_INFO%g
+s%@PERL@%$PERL%g
+s%@HAVE_PERL@%$HAVE_PERL%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_os@%$build_os%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
s%@CC@%$CC%g
+s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
+s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
+s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@host_makefile_frag@%%g
s%@CPP@%$CPP%g
s%@CHECK@%$CHECK%g
+s%@target_header_dir@%$target_header_dir%g
s%@LIBOBJS@%$LIBOBJS%g
-s%@ALLOCA@%$ALLOCA%g
+s%@pexecute@%$pexecute%g
s%@INSTALL_DEST@%$INSTALL_DEST%g
CEOF
host=${host}
target=${target}
with_target_subdir=${with_target_subdir}
+with_build_subdir=${with_build_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
libiberty_topdir=${libiberty_topdir}
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
- if test -n "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
. ${libiberty_topdir}/config-ml.in
fi
fi