+start-sanitize-fr30
+Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
+end-sanitize-fr30
+Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
+
+ * mips-opc.c (sync.p,sync.l): Swap insn values.
+
+start-sanitize-fr30
+1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+
+end-sanitize-fr30
+1998-11-18 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
+ (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
+ to hold value.
+ (insert_insn_normal): Fix typo.
+ * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
+ * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
+ Rewrite ! CGEN_INT_INSN_P case.
+ (extract_insn_normal): Ditto.
+ (extract_1): New arg `pc'. All callers updated.
+ Replace calls to bfd_getb8.
+ (fill_cache): New fn.
+ * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
+ * cgen-opc.in: ... from here.
+ (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
+start-sanitize-fr30
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
+end-sanitize-fr30
+
+start-sanitize-fr30
+Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+
+Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
+Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
+
+ * po/opcodes.pot: Regenerated.
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
+Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
+
+ * disassemble.c (disassembler): Add support for FR30 target.
+
+end-sanitize-fr30
+Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
+ CGEN_OPERAND_SEM_ONLY.
+end-sanitize-cygnus
+ * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
+start-sanitize-fr30
+ * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
+
+Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
+
+ * po/opcodes.pot: Regenerate.
+ * po/POTFILES.in: Regenerate.
+ * fr30-opc.c: Regenerate.
+ * fr30-opc.h: Regenerate.
+end-sanitize-fr30
+Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-asm.c: Regenerate.
+
+start-sanitize-fr30
+Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
+
+ * configure.in: Added case for bfd_fr30_arch.
+ * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
+ (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
+ (CLEANFILES): Added stamp-fr30.
+ (FR30_DEPS): Added.
+ * fr30-asm.c: New file.
+ * fr30-dis.c: New file.
+ * fr30-opc.c: New file.
+ * fr30-opc.h: New file.
+ * po/POTFILES.in: Regenerated
+ * po/opcodes.pot: Regenerated
+
+end-sanitize-fr30
+start-sanitize-m32rx
+Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
+ to bcl8,bncl8 entries.
+ (macro_insn_table_entries): Add FILL_SLOT attribute
+ to bcl8r,bncl8r entries.
+
+end-sanitize-m32rx
+Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * configure.in: detect cygwin* instead of cygwin32*
+ * configure: regenerate
+
+Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips-opc.c (IS_M): Added.
+
+start-sanitize-r5900
+Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
+ and masks.
+
+end-sanitize-r5900
+Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-asm.in (insert_1): New function.
+ (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
+ (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
+ (@arch@_cgen_assemble_insn): Update type of `buf' arg.
+ * cgen-dis.in (extract_1): New function.
+ (extract_normal): buf_ctrl renamed to ex_info, update type.
+ Progress on handling of CGEN_INT_INSN_P.
+ (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
+ Update handling of CGEN_INT_INSN_P. Handle errors from
+ @arch@_cgen_extract_operand.
+ (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
+ (default_print_insn): Renamed from print_insn.
+ Handle ! CGEN_INT_INSN_P.
+ (print_insn_@arch@): Handle error returns from print_insn.
+ * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
+ (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
+ (@arch@_cgen_lookup_get_insn_operands): Ditto.
+end-sanitize-cygnus
+ * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
+
+start-sanitize-am33
+Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Allow autoincrement stores using the same register
+ for source and destination operands.
+
+Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: DSP instrutions which only write to one general
+ register have no restrictions on matching operands.
+
+ * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
+
+end-sanitize-am33
+Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-opc.h,m32r-opc.c: Regenerate.
+
+start-sanitize-am33
+Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
+
+end-sanitize-am33
+Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (OP_3DNowSuffix): New static function.
+ (OPSUF): Define.
+ (GRP14): Define.
+ (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
+ (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
+ (insn_codep): New static variable.
+ (print_insn_x86): Init insn_codep after prefixes.
+ (grps): Add GRP14 entries for prefetch, prefetchw.
+ (OP_REG): Reformat.
+
+ From Jeff B Epler <jepler@usgs.gov>
+ * i386-dis.c (Suffix3DNow): New table.
+
+Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
+
+Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * d10v-dis.c (print_operand): If num is nonzero, then
+ add OPERAND_ACC1, not OPERAND_ACC0.
+
+Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
+ insns.
+
+Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
+ class.
+
+start-sanitize-sky
+Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
+
+end-sanitize-sky
+Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
+
+start-sanitize-nortel-ppc750
+1998-09-09 Michael Meissner <meissner@cygnus.com>
+
+ * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
+ to/from SPRs.
+
+end-sanitize-nortel-ppc750
+Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
+ object files.
+ (print_insn_little_arm): Detect Thumb symbols in elf object
+ files.
+
+Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
+
+ * alpha-dis.c (print_insn_alpha): Use the machine type to
+ decide which PALcode set to include.
+
+Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
+
+ * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
+
+Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
+ MSUB and MSUBS instructions.
+
+start-sanitize-r5900
+Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-opc.c: Insert contents of vu0.h, rather than including it.
+ * vu0.h: Remove.
+ * Makefile.am: Rebuild dependencies.
+ * Makefile: Rebuild.
+
+end-sanitize-r5900
+Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * ppc-opc.c (powerpc_operands): Omit parens around additions in
+ operand name macros.
+
+Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
+
+start-sanitize-coldfire
+ * m68k-opc.c: Correct divsl, divul, remsl, and remul for
+ ColdFire, as below for mulsl and mulul.
+
+end-sanitize-coldfire
+ From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
+ * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
+ +, -, and d for ColdFire.
+
+ From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
+ * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
+ (extract_mbe): Likewise.
+
+Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
+
+ * m10300-opc.c: First cut at UDF instructions.
+
+Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.c: Regenerate (remove semantic descriptions).
+
+Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
+
+ * arm-dis.c (print_insn_big_arm): Fix indentation.
+ (print_insn_little_arm): Likewise.
+
+Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
+
+ * arm-dis.c (print_insn_big_arm): Check for thumb symbol
+ attributes.
+ (print_insn_little_arm): Likewise.
+
+Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
+
+ Move all global state data into opcode table struct, and treat
+ opcode table as something that is "opened/closed".
+ * cgen-asm.c (all fns): New first arg of opcode table descriptor.
+ (cgen_asm_init): Delete.
+ (cgen_set_parse_operand_fn): New function.
+ * cgen-dis.c (all fns): New first arg of opcode table descriptor.
+ (cgen_dis_init): Delete.
+ * cgen-opc.c (all fns): New first arg of opcode table descriptor.
+ (cgen_current_{opcode_table_mach,endian}): Delete.
+start-sanitize-cygnus
+ * cgen-asm.in (all fns): New first arg of opcode table descriptor.
+ * cgen-dis.in (all fns): Ditto.
+ * cgen-opc.in (all fns): Ditto.
+end-sanitize-cygnus
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
+
+start-sanitize-cygnus
+ * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
+
+ * cgen-dis.in (print_normal): Split into two.
+ (print_address): New function.
+ (extract_insn_normal): Clarify insn_value arg.
+ (print_int_insn): Renamed from print_insn.
+ (print_insn): New arg.
+ (print_insn_@arch@): Open opcode table if not already done so.
+ Move reading of insn into print_insn.
+
+end-sanitize-cygnus
+Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
+ instructions.
+
+start-sanitize-m32rx
+Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
+ accept an accumulator choice.
+ * m32r-opc.c,m32r-opc.h: Regenerate.
+
+end-sanitize-m32rx
+Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Add entries for "no_match_operands" field in
+ the opcode table.
+
+start-sanitize-am33
+Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
+ operand.
+
+end-sanitize-am33
+Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
+
+start-sanitize-am33
+Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Add DSP autoincrement memory loads/stores.
+
+ * m10300-opc.c: Add autoincrement memory loads/stores.
+
+end-sanitize-am33
+start-sanitize-r5900
+Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
+ phmsubh respectively.
+
+end-sanitize-r5900
+Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
+ CGEN_EXTRACT_FN.
+ (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
+ @arch_cgen_get_int_operand.
+ * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
+ Update call to @arch@_cgen_insert_operand.
+ (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
+ * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
+ (extract_insn_normal): New arg `pc', callers updated.
+ Update call to @arch@_cgen_extract_operand.
+ (print_insn): Update call to CGEN_EXTRACT_FN.
+end-sanitize-cygnus
+ * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
+
+start-sanitize-am33
+Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Fix load to sp and store from sp for the am33.
+ Add more multimedia instructions.
+
+Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
+ "mulu".
+
+end-sanitize-am33
+start-sanitize-r5900
+Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mips-opc.c (pref): Enabled for the r5900.
+
+end-sanitize-r5900
+Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
+ the first prefix.
+ (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
+ than `fnstsw %eax'.
+ (OP_J): Remove unnecessary subtraction when 16-bit displacement
+ will be masked later.
+
+start-sanitize-am33
+Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
+ instructions.
+
+Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
+ from raw register #s to symbolic names to make debugging easier.
+
+end-sanitize-am33
+Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
+
+Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
+start-sanitize-cygnus
+ * Makefile.am (CGENDIR): Set via configure.
+ (CGEN): New variable.
+ (CGENFILES): object.scm renamed to cos.scm.
+ (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
+ (stamp-m32r): Pass prefix to run-cgen.
+ * Makefile.in: Regenerate.
+ * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
+ * cgen-dis.in: Ditto.
+ * cgen-opc.in: Ditto.
+ * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
+ * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
+ * configure: Regenerate.
+end-sanitize-cygnus
+
+start-sanitize-am33
+Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
+
+Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Reorder more instructions so that we do not
+ accidentally match a mn10300 instruction when we really
+ wanted an am33 instruction.
+
+end-sanitize-am33
+Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c: Only recognize instructions from the currently
+ selected machine.
+ * m10300-opc.c: Add field indicating the particular variant of
+ the mn10300 each instruction is available on.
+
+Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: For bfd_vax_arch, build vax-dis.lo.
+ * Makefile.am: Rebuild dependencies.
+ (CFILES): Add vax-dis.c.
+ (ALL_MACHINES): Add vax-dis.lo.
+ * aclocal.m4: Rebuild with current libtool.
+ * configure, Makefile.in: Rebuild.
+
+Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
+
+ * vax-dis.c: New file, from work by Pauline Middelink
+ <middelin@polyware.iaf.nl>.
+ * disassemble.c (ARCH_vax): Define if ARCH_all.
+ (disassembler): Add case for ARCH_vax.
+ * makefile.vms: Support compilation on vms/vax.
+
+start-sanitize-sky
+Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
+ the DVP_OPERAND_RELOC_11_S4 relocation.
+
+end-sanitize-sky
+start-sanitize-am33
+Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
+ 4 byte instructions.
+ (disassemble): Correctly handle FMT_D10 instructions.
+
+ * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
+ am33 shift instructions.
+
+ * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
+ 3 byte instructions.
+ (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
+ FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
+
+ * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
+ (mn10300_opcodes): Reorder so as to try and select opcodes from
+ the core chip when multiple alternatives exist. Change several
+ am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
+ "macbu" instructions. Fix typos in a couple DSP instructions too.
+
+end-sanitize-am33
+Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
+
+ * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
+ related to sign extension and the size of ints.
+
+Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
+ instructions. Support (sp) addressing mode by expanding it into
+ (0,sp).
+
+start-sanitize-sky
+Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * dvp-opc.c (LIMM11, LUIMM15): New symbol types
+ DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
+ be used as immediate values.
+
+end-sanitize-sky
+start-sanitize-am33
+Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Support 4 byte DSP instructions.
+
+end-sanitize-am33
+Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
+
+start-sanitize-am33
+Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Support 6 and 7 byte am33 instructions.
+
+end-sanitize-am33
+Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
+
+ * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
+
+start-sanitize-am33
+Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
+ found on the mn10300.
+
+end-sanitize-am33
1998-06-18 Ulrich Drepper <drepper@cygnus.com>
* i386-dis.c: Add support for fxsave, fxrstor, sysenter and
(sqrt.s): Likewise.
end-sanitize-r5900
-start-sanitize-vr5400
+start-sanitize-cygnus
Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
* mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
Change pinfo to use WR_HILO.
-end-sanitize-vr5400
-start-sanitize-d30v
+end-sanitize-cygnus
Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
LONG_2, LONG_2b formats to use this new operand.
-end-sanitize-d30v
Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
* sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
* sparc-dis.c (print_insn_sparc): big endian instruction / little
endian data support.
-start-sanitize-d30v
Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
to existing 1.1.1 parallelisation prohibition procedure.
-end-sanitize-d30v
Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
* cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
insns.
end-sanitize-m32rx
-start-sanitize-d30v
Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
* d30v-opc.c (pre_defined_register): Remove alias for r0.
-end-sanitize-d30v
start-sanitize-r5900
Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
* arc-opc.c: Internationalised.
* arm-dis.c: Internationalised.
* cgen-asm.c: Internationalised.
-start-sanitize-d30v
* d30v-dis.c: Internationalised.
-end-sanitize-d30v
* dis-buf.c: Internationalised.
start-sanitize-sky
* dvp-dis.c: Internationalised.
* Branched binutils 2.9.
-start-sanitize-d30v
Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
* d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
disassembling last 4 bytes of a section.
-end-sanitize-d30v
Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
Fix some gcc -Wall warnings:
* cgen-dis.c (build_dis_hash_table): Remove used local variables.
* cgen-opc.c (cgen_keyword_search_next): Likewise.
* d10v-dis.c (dis_long, dis_2_short): Likewise.
-start-sanitize-d30v
* d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
-end-sanitize-d30v
start-sanitize-sky
* dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
* dvp-opc.c (parse_dest1, print_uflags): Likewise.
* a29k-dis.c: Add return type for find_byte_func_type.
* arc-opc.c: Include <stdio.h>. Remove declarations of
insert_multshift and extract_multshift.
-start-sanitize-d30v
* d30v-dis.c (lookup_opcode): Parenthesize assignments in
conditionals.
(extract_value): Fully parenthesize expression.
-end-sanitize-d30v
start-sanitize-sky
* dvp-opc.c: Include <ctype.h>.
(print_sdest): Add default case to switch.
(r5900/msub.s): Takes three operands, not four. Fix opcode.
end-sanitize-r5900
-start-sanitize-d30v
Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Indicate which instructions are
delayed branches or jumps.
-end-sanitize-d30v
start-sanitize-sky
Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
* configure, aclocal.m4: Rebuild with new libtool.
-start-sanitize-d30v
Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (repeat{,i} instructions): Repeat/repeati
instructions use a PC relative branch, not absolute.
-end-sanitize-d30v
Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Set libtool_enable_shared rather than
* mips-opc.c: Add many missing r5900 instructions.
end-sanitize-r5900
-start-sanitize-d30v
Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Set new flags bits
FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
-end-sanitize-d30v
1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
* configure: Only build libopcodes shared if --enable-shared's value
* m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
which has a two word opcode with a one word argument.
-start-sanitize-d30v
Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
unsigned, not signed.
(d30v_format_table): Add SHORT_CMPU cases for cmpu.
-end-sanitize-d30v
Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
* sh-dis.c (print_insn_shx): Recognize all sh4 additions.
sh-opc.h (sh_table): Remove ftst/nan.
-start-sanitize-vr5400
+start-sanitize-cygnus
Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
* mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
last.
* mips-dis.c (print_insn_arg): Handle VR5400 operand types.
-end-sanitize-vr5400
+end-sanitize-cygnus
start-sanitize-tx49
Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
* mips-opc.c (ffc, ffs): Fix mask.
-start-sanitize-d30v
Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
control registers.
-end-sanitize-d30v
Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
* mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
-start-sanitize-vr5400
+start-sanitize-cygnus
Added VR5400 instructions.
(N5): New cpu-id macro.
-end-sanitize-vr5400
+end-sanitize-cygnus
(WR_HILO, RD_HILO, MOD_HILO): New macros.
Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
* v850-opc.c (v850_opcodes): Further rearrangements.
-start-sanitize-d30v
Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
* d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
-end-sanitize-d30v
Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (v850_opcodes): Fields reordered to allow assembler
* v850-opc.c: Initialise processors field of v850_opcode structure.
-start-sanitize-d30v
Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
Merge changes from Martin Hunt:
* d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
-end-sanitize-d30v
start-sanitize-v850e
Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
* mips-opc.c: Add dctr and dctw.
-start-sanitize-d30v
Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d30v-dis.c (print_insn): Change the way signed constants
are displayed.
-end-sanitize-d30v
+
Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (BFD_H): New variable.
* tic80-dis.c (print_operand_bitnum): Ditto.
end-sanitize-tic80
-start-sanitize-d30v
Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d30v-opc.c: Removed references to FLAG_X.
-end-sanitize-d30v
Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in: Add dependencies on ../bfd/bfd.h as required.
-start-sanitize-d30v
Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in: Added d30v object files.
* d30v-opc.c: New file.
* disassemble.c (disassembler) Add entry for d30v.
-end-sanitize-d30v
start-sanitize-tic80
Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
projects / deliverable / binutils-gdb.git / blobdiff