+Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
+
+ * configure.bat: update to latest makefile.in
+
+Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
+
+ * a29k-dis.c (print_insn): Print 'x' type operand in hex.
+ * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
+ * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
+ slot insn is in a delay slot.
+ * z8k-opc.h: (resflg): Fix patterns.
+ * h8500-opc.h Fix CR insn patterns.
+
+Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
+ "cmpl" before POWER versions, so that gas -many uses them.
+
+Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
+
+ * disassemble.c: New file.
+ * Makefile.in (OFILES): Add disassemble.o.
+ (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
+ * configure.in: Define ARCHDEFS in Makefile. Code taken from
+ binutils/configure.in.
+
+ * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
+ opcode being examined.
+
+Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
+ (insert_ral, insert_ram, insert_ras): New functions.
+ (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
+ RAS for store with update.
+
+Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
+ (edelsohn@npac.syr.edu).
+
+Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
+ immediate argument.
+
+Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
+
+ * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
+
+Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_operands): The signedp field has been
+ removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
+ instead. Add new operand SISIGNOPT.
+ (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
+ Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
+ * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
+ than signedp field.
+
+Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * i386-dis.c (struct private): Renamed to dis_private. `private'
+ is a reserved word for dynix cc.
+
+Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * configure.in: Change error message to refer to bfd/config.bfd
+ rather than bfd/configure.in.
+
+Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
+
+ * ppc-opc.c: Define POWER2 as short alias flag.
+ (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
+ fsqrt.
+
+Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * i960-dis.c (print_insn_i960): Don't read a second word for
+ opcodes 0, 1, 2 and 3.
+
+Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
+
+Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * m68881-ext.c: Removed; no longer used.
+ * Makefile.in: Changed accordingly.
+
+ * m68k-dis.c (ext_format_68881): Don't declare.
+ (print_insn_m68k): If an instruction uses place 'i', it uses at
+ least four fixed bytes.
+ (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
+ extended float, convert to double using floatformat_to_double, not
+ ieee_extended_to_double, and fetch the data before converting it.
+
+Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: It's sqrt.s, not sqrt.w. From
+ davidj@ICSI.Berkeley.EDU (David Johnson).
+
+Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
+ PowerPC uses bdnz[l][a].
+
+Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dis-buf.c, i386-dis.c: Include sysdep.h.
+
+Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
+
+ * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
+ by Motorola PowerPC 601 with PPC_OPCODE_601.
+ * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
+ Disassemble Motorola PowerPC 601 instructions as well as normal
+ PowerPC instructions.
+
+Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * i960-dis.c (reg, mem): Just use a static array instead of
+ calling xmalloc.
+
+Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
+
+ * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
+ condition name index if this is for a negated condition.
+
+ * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
+ Floating point format for 'H' operand is backwards from normal
+ case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
+ operands (fmpyadd and fmpysub), handle bizarre register
+ translation correctly for single precision format.
+
+ * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
+ or 'I' operands if the next format specifier is 'M' (fcmp
+ condition completer).
+
+Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
+ single number giving a bitmask for the MB and ME fields of an M
+ form instruction. Change NB to accept 32, and turn it into 0;
+ also turn 0 into 32 when disassembling. Seperated SH from NB.
+ (insert_mbe, extract_mbe): New functions.
+ (insert_nb, extract_nb): New functions.
+ (SC_MASK): Mask out SA and LK bits.
+ (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
+ RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
+ "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
+ "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
+ "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
+ use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
+ (powerpc_macros): Define table of macro definitions.
+ (powerpc_num_macros): Define.
+
+ * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
+ if PPC_OPERAND_NEXT is set.
+
+Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
+ char. Retrieve contents using bfd_getl32 instead of shifting.
+
+Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * ppc-opc.c: New file. Opcode table for PowerPC, including
+ opcodes for POWER (RS/6000).
+ * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
+ * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
+ (CFILES): Add ppc-dis.c.
+ (ppc-dis.o, ppc-opc.o): New targets.
+ * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
+
+Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
+
+ * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
+ No space before 'u', 'f', or 'N'.
+
+Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
+ farther than we should.
+
+ * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
+
+Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
+
+ * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
+
+Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
+
+ * i960-dis.c (print_insn_i960): Only read word2 if the instruction
+ needs it, to prevent reading past the end of a section.
+
+Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
+ Removed t,A case for la; always use t,A(b) case.
+
+Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ From Ted Lemen <mellon@pepper.ncd.com>
+ * mips-dis.c (print_insn_arg): Handle 'k'.
+ * mips-opc.c: Make cache use k, not t.
+
+Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
+ FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
+ FLOAT_FORMAT_CODE to put out floating point register names.
+
+Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
+
+Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
+
+Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
+ larger than 32. Moved dsxx32 variants first for disassembler.
+
+Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * z8kgen.c, z8k-opc.h: Add full lda information.
+
+Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
+
+ * hppa-dis.c (print_insn_hppa): Do not emit a space after
+ movb instructions. Any necessary space will be emitted by
+ the code to handle nullification completers.
+
+Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
+
+Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
+ * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
+
+Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Correct lwu opcode value (book had it wrong).
+
+Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * z8k-dis.c (FETCH_DATA): get just the right amount of data.
+ (unpack_instr): Cope with ARG_IMM4M1 type instructions.
+
+Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * m88k-dis.c (m88kdis): comment change. Remove space after
+ printing mnemonic.
+ (printop): handle new arg types DEC and XREG for m88110.
+
+Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
+
+ * hppa-dis.c (print_insn_hppa): Handle 'z' operand
+ type for absolute branch addresses. Delete special
+ "ble" and "be" code in 'W' operand code.
+
+Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Set hazard information correctly for branch
+ likely instructions.
+
+Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
+ info->fprintf_func for printing and info->print_address_func for
+ address output.
+
+Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Set INSN_TRAP for tXX instructions.
+
+Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
+ Corrected second case of "b" for disassembler.
+
+Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
+ to BFD swapping routines to correspond to BFD name changes.
+
+Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Change div machine instruction to be z,s,t rather
+ than s,t. Change div macro to be d,v,t rather than d,s,t.
+ Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
+ rem and remu which generates only the corresponding div
+ instruction. This is for compatibility with the MIPS assembler,
+ which only generates the simple machine instruction when an
+ explicit destination of $0 is used.
+ * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
+
+Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
+ WR_31 hazard for bal, bgezal, bltzal.
+
+Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * hppa-dis.c (print_insn_hppa): Use print function
+ from within the disassemble_info, not fprintf_filtered.
+
+Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
+
+ * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
+ Law, law@cs.utah.edu.)
+
+Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c ("absu"): Removed.
+ ("dabs"): Added.
+
+Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Added r6000 and r4000 instructions and macros.
+ Changed hazard information to distinguish between memory load
+ delays and coprocessor load delays.
+
+Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
+
+Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
+
+ * configure.in: Don't pass cpu to config.bfd.
+
+Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * m88k-dis.c (m88kdis): Make class unsigned.
+
+Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * alpha-dis.c (print_insn_alpha): One branch format case was
+ missing the instruction name.
+
+Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
+
+ * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
+ Add the arch-specific auxiliary files.
+ (OFILES): Remove the arch-specific auxiliary files
+ and use BFD_MACHINES instead of DIS_LIBS.
+ * configure.in: Set BFD_MACHINES based on --with-targets option.
+
+Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
+ for swc1.
+
+Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * sparc-opc.c: Change CONST to const to deal with gcc
+ -Dconst=__const -traditional.
+
+Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
+ coprocessor instructions out of #if 0, and made them use new
+ argument type "C".
+
+Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
+
+Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
+
+ * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
+ instruction, for use by the disassembler.
+
+ * sparc-dis.c (SEX): Add sign extension macro. Replace many
+ hand-coded sign extensions that depended on 32-bit host ints.
+ FIXME, we still depend on big-endian host bitfield ordering.
+ (sparc_print_insn): Set the insn_info_valid field, and the
+ other fields that describe the instruction being printed.
+
+Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
+
+ * sparc-opc.c (call): Accept all 6 addressing modes valid for
+ `jmp' instead of just one of them.
+
+Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
+ (fput_fp_reg_r): Renamed from fput_reg_r.
+ (fput_fp_reg): New function.
+ (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
+
+ * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
+
+ * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
+
+Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
+
+ * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
+ don't output a space.
+
+ * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
+
+Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
+
+ * mips-opc.c: New file, containing opcode table from
+ ../include/opcode/mips.h.
+ * Makefile.in: Add it.
+
+Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * m88k-dis.c: New file, moved in from gdb and changed to use the
+ new dis-asm.h disassembler interface.
+ * Makefile.in (DIS_LIBS): Added m88k-dis.o.
+ (m88k-dis.o): New target.
+
+Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
+ argument string const char * to correspond to opcode/mips.h.
+
+Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * mips-dis.c: Updated to account for name changes in new version
+ of opcode/mips.h.
+ * Makefile.in: Added header file dependencies.
+
+Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
+
+Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
+ extend, rather than shifts.
+
+Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
+
+ * Makefile.in: Undo 15 June change.
+
+Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
+
+ * m68k-dis.c (print_insn_arg): Change return value to byte count
+ or error code.
+ * m68k-dis.c: Re-write to detect invalid operands before
+ printing anything, so we can handle this the same way we
+ handle invalid opcodes.
+
+Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * sh-dis.c, sh-opc.h: Understand some more opcodes.
+
+Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
+ header files.
+
+Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
+
+ * sparc-dis.c: Don't declare qsort, since sysdep.h might.
+
+ * configure.in: Do make sysdep.h link.
+ * Makefile.in: Search ../include. Don't search ../bfd.
+
+Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
+
+ Changes from Jeff Law, law@cs.utah.edu:
+ * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
+ Do not print a space before the completers specified by
+ 'a' and 'd'.
+
Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
* mips-dis.c: No longer need to bomb out if HOST_64_BIT is
* z8k-dis.c: knows how to disassemble z8k stuff
* z8k-opc.h: new file full of z8000 opcodes
-
-
+\f
+Local Variables:
+version-control: never
+End:
projects / deliverable / binutils-gdb.git / blobdiff