-2014-08-13 Mike Frysinger <vapier@gentoo.org>
-
- * bfin-dis.c (ifetch): New function.
- (_print_insn_bfin, print_insn_bfin): Call new ifetch and return
- -1 when it errors.
-
-2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
-
- * micromips-opc.c (COD): Rename throughout to...
- (CM): New define, update to use INSN_COPROC_MOVE.
- (LCD): Rename throughout to...
- (LC): New define, update to use INSN_LOAD_COPROC.
- * mips-opc.c: Likewise.
-
-2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
-
- * micromips-opc.c (COD, LCD) New macros.
- (cfc1, ctc1): Remove FP_S attribute.
- (dmfc1, mfc1, mfhc1): Add LCD attribute.
- (dmtc1, mtc1, mthc1): Add COD attribute.
- * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute.
-
-2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
- Alexander Ivchenko <alexander.ivchenko@intel.com>
- Maxim Kuznetsov <maxim.kuznetsov@intel.com>
- Sergey Lega <sergey.s.lega@intel.com>
- Anna Tikhonova <anna.tikhonova@intel.com>
- Ilya Tocar <ilya.tocar@intel.com>
- Andrey Turetskiy <andrey.turetskiy@intel.com>
- Ilya Verbin <ilya.verbin@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis-evex.h: Updated.
- * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F54, PREFIX_EVEX_0F55,
- PREFIX_EVEX_0F56, PREFIX_EVEX_0F57, PREFIX_EVEX_0F3A16,
- PREFIX_EVEX_0F3A22, PREFIX_EVEX_0F3A50, PREFIX_EVEX_0F3A51,
- PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66,
- PREFIX_EVEX_0F3A67.
- (VEX_LEN enum): Add VEX_LEN_0F92_P_2, VEX_LEN_0F93_P_2,
- VEX_W_0F92_P_2_LEN_0, VEX_W_0F93_P_2_LEN_0.
- (VEX_W enum): Add EVEX_W_0F54_P_0, EVEX_W_0F54_P_2, EVEX_W_0F55_P_0,
- EVEX_W_0F55_P_2, EVEX_W_0F56_P_0, EVEX_W_0F56_P_2, EVEX_W_0F57_P_0,
- EVEX_W_0F57_P_2, EVEX_W_0F78_P_2, EVEX_W_0F79_P_2, EVEX_W_0F7A_P_2,
- EVEX_W_0F7B_P_2, EVEX_W_0F3838_P_1, EVEX_W_0F3839_P_1,
- EVEX_W_0F3A16_P_2, EVEX_W_0F3A22_P_2, EVEX_W_0F3A50_P_2,
- EVEX_W_0F3A51_P_2, EVEX_W_0F3A56_P_2, EVEX_W_0F3A57_P_2,
- EVEX_W_0F3A66_P_2, EVEX_W_0F3A67_P_2.
- (prefix_table): Add entries for new instructions.
+2015-04-29 Nick Clifton <nickc@redhat.com>
+
+ * po/fr.po: Updated French translation.
+
+2015-04-27 Peter Bergner <bergner@vnet.ibm.com>
+
+ * ppc-opc.c (DCBT_EO): New define.
+ (powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
+ <lharx>: Likewise.
+ <stbcx.>: Likewise.
+ <sthcx.>: Likewise.
+ <waitrsv>: Do not enable for POWER7 and later.
+ <waitimpl>: Likewise.
+ <dcbt>: Default to the two operand form of the instruction for all
+ "old" cpus. For "new" cpus, use the operand ordering that matches
+ whether the cpu is server or embedded.
+ <dcbtst>: Likewise.
+
+2015-04-27 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
+
+ * s390-opc.c: New instruction type VV0UU2.
+ * s390-opc.txt: Fix instruction types for VFCE, VLDE, VFSQ, WFK,
+ and WFC.
+
+2015-04-23 Jan Beulich <jbeulich@suse.com>
+
+ * i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
+ * i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
+ vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
+ (vfpclasspd, vfpclassps): Add %XZ.
+
+2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (PREFIX_UD_SHIFT): Removed.
+ (PREFIX_UD_REPZ): Likewise.
+ (PREFIX_UD_REPNZ): Likewise.
+ (PREFIX_UD_DATA): Likewise.
+ (PREFIX_UD_ADDR): Likewise.
+ (PREFIX_UD_LOCK): Likewise.
+
+2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (prefix_requirement): Removed.
+ (print_insn): Don't set prefix_requirement. Check
+ dp->prefix_requirement instead of prefix_requirement.
+
+2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/17898
+ * i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
+ (PREFIX_MOD_0_0FC7_REG_6): This.
+ (PREFIX_MOD_3_0FC7_REG_6): New.
+ (PREFIX_MOD_3_0FC7_REG_7): Likewise.
+ (prefix_table): Replace PREFIX_0FC7_REG_6 with
+ PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
+ PREFIX_MOD_3_0FC7_REG_7.
+ (mod_table): Replace PREFIX_0FC7_REG_6 with
+ PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
+ PREFIX_MOD_3_0FC7_REG_7.
+
+2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (PREFIX_MANDATORY_REPZ): Removed.
+ (PREFIX_MANDATORY_REPNZ): Likewise.
+ (PREFIX_MANDATORY_DATA): Likewise.
+ (PREFIX_MANDATORY_ADDR): Likewise.
+ (PREFIX_MANDATORY_LOCK): Likewise.
+ (PREFIX_MANDATORY): Likewise.
+ (PREFIX_UD_SHIFT): Set to 8
+ (PREFIX_UD_REPZ): Updated.
+ (PREFIX_UD_REPNZ): Likewise.
+ (PREFIX_UD_DATA): Likewise.
+ (PREFIX_UD_ADDR): Likewise.
+ (PREFIX_UD_LOCK): Likewise.
+ (PREFIX_IGNORED_SHIFT): New.
+ (PREFIX_IGNORED_REPZ): Likewise.
+ (PREFIX_IGNORED_REPNZ): Likewise.
+ (PREFIX_IGNORED_DATA): Likewise.
+ (PREFIX_IGNORED_ADDR): Likewise.
+ (PREFIX_IGNORED_LOCK): Likewise.
+ (PREFIX_OPCODE): Likewise.
+ (PREFIX_IGNORED): Likewise.
+ (Bad_Opcode): Replace PREFIX_MANDATORY with 0.
+ (dis386_twobyte): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
+ (three_byte_table): Likewise.
+ (mod_table): Likewise.
+ (mandatory_prefix): Renamed to ...
+ (prefix_requirement): This.
+ (prefix_table): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
+ Update PREFIX_90 entry.
+ (get_valid_dis386): Check prefix_requirement to see if a prefix
+ should be ignored.
+ (print_insn): Replace mandatory_prefix with prefix_requirement.
+
+2015-04-15 Renlin Li <renlin.li@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Define 'D' format control code,
+ use it for ssat and ssat16.
+ (print_insn_thumb32): Add handle case for 'D' control code.
+
+2015-04-06 Ilya Tocar <ilya.tocar@intel.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis-evex.h (evex_table): Fill prefix_requirement field.
+ * i386-dis.c (PREFIX_MANDATORY_REPZ, PREFIX_MANDATORY_REPNZ,
+ PREFIX_MANDATORY_DATA, PREFIX_MANDATORY_ADDR, PREFIX_MANDATORY_LOCK,
+ PREFIX_UD_SHIFT, PREFIX_UD_REPZ, REFIX_UD_REPNZ, PREFIX_UD_DATA,
+ PREFIX_UD_ADDR, PREFIX_UD_LOCK, PREFIX_MANDATORY): Define.
+ (Bad_Opcode, FLOAT, DIS386, DIS386_PREFIX, THREE_BYTE_TABLE_PREFIX):
+ Fill prefix_requirement field.
+ (struct dis386): Add prefix_requirement field.
+ (dis386): Fill prefix_requirement field.
+ (dis386_twobyte): Ditto.
+ (twobyte_has_mandatory_prefix_: Remove.
+ (reg_table): Fill prefix_requirement field.
+ (prefix_table): Ditto.
+ (x86_64_table): Ditto.
+ (three_byte_table): Ditto.
+ (xop_table): Ditto.
+ (vex_table): Ditto.
(vex_len_table): Ditto.
(vex_w_table): Ditto.
- (OP_E_memory): Update xmmq_mode handling.
- * i386-gen.c (cpu_flag_init): Add CPU_AVX512DQ_FLAGS.
- (cpu_flags): Add CpuAVX512DQ.
- * i386-init.h: Regenerared.
- * i386-opc.h (CpuAVX512DQ): New.
- (i386_cpu_flags): Add cpuavx512dq.
- * i386-opc.tbl: Add AVX512DQ instructions.
- * i386-tbl.h: Regenerate.
-
-2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
- Alexander Ivchenko <alexander.ivchenko@intel.com>
- Maxim Kuznetsov <maxim.kuznetsov@intel.com>
- Sergey Lega <sergey.s.lega@intel.com>
- Anna Tikhonova <anna.tikhonova@intel.com>
- Ilya Tocar <ilya.tocar@intel.com>
- Andrey Turetskiy <andrey.turetskiy@intel.com>
- Ilya Verbin <ilya.verbin@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis-evex.h: Add new instructions (prefixes bellow).
- * i386-dis.c (fetch_data): Add EdqwS, Edb, Edw, MaskBDE.
- (enum): Add dqw_swap_mode, db_mode, dw_mode, mask_bd_mode, REG_EVEX_0F71.
- (PREFIX enum): Add PREFIX_VEX_0F4A, PREFIX_VEX_0F99, PREFIX_VEX_0F3A31,
- PREFIX_VEX_0F3A33, PREFIX_EVEX_0F60, PREFIX_EVEX_0F61, PREFIX_EVEX_0F63,
- PREFIX_EVEX_0F64, PREFIX_EVEX_0F65, PREFIX_EVEX_0F67, PREFIX_EVEX_0F68,
- PREFIX_EVEX_0F69, PREFIX_EVEX_0F6B, PREFIX_EVEX_0F71_REG_2, PREFIX_EVEX_0F71_REG_4,
- PREFIX_EVEX_0F71_REG_6, PREFIX_EVEX_0F73_REG_3, PREFIX_EVEX_0F73_REG_7,
- PREFIX_EVEX_0F74, PREFIX_EVEX_0F75, PREFIX_EVEX_0FC4, PREFIX_EVEX_0FC5,
- PREFIX_EVEX_0FD1, PREFIX_EVEX_0FD5, PREFIX_EVEX_0FD8, PREFIX_EVEX_0FD9,
- PREFIX_EVEX_0FDA, PREFIX_EVEX_0FDC, PREFIX_EVEX_0FDD, PREFIX_EVEX_0FDE,
- PREFIX_EVEX_0FE0, PREFIX_EVEX_0FE1, PREFIX_EVEX_0FE3, PREFIX_EVEX_0FE4,
- PREFIX_EVEX_0FE5, PREFIX_EVEX_0FE8, PREFIX_EVEX_0FE9, PREFIX_EVEX_0FEA,
- PREFIX_EVEX_0FEC, PREFIX_EVEX_0FED, PREFIX_EVEX_0FEE, PREFIX_EVEX_0FF1,
- PREFIX_EVEX_0FF5, PREFIX_EVEX_0FF6, PREFIX_EVEX_0FF8, PREFIX_EVEX_0FF9,
- PREFIX_EVEX_0FFC, PREFIX_EVEX_0FFD, PREFIX_EVEX_0F3800, PREFIX_EVEX_0F3804,
- PREFIX_EVEX_0F380B, PREFIX_EVEX_0F3810, PREFIX_EVEX_0F381C, PREFIX_EVEX_0F381D,
- PREFIX_EVEX_0F3820, PREFIX_EVEX_0F3826, PREFIX_EVEX_0F382B, PREFIX_EVEX_0F3830,
- PREFIX_EVEX_0F3838, PREFIX_EVEX_0F383C, PREFIX_EVEX_0F383E, PREFIX_EVEX_0F3866,
- PREFIX_EVEX_0F3875, PREFIX_EVEX_0F3878, PREFIX_EVEX_0F3879, PREFIX_EVEX_0F387A,
- PREFIX_EVEX_0F387B, PREFIX_EVEX_0F387D, PREFIX_EVEX_0F388D, PREFIX_EVEX_0F3A0F,
- PREFIX_EVEX_0F3A14, PREFIX_EVEX_0F3A15, PREFIX_EVEX_0F3A20, PREFIX_EVEX_0F3A3E,
- PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A42.
- (VEX_LEN enum): Add VEX_LEN_0F41_P_2, VEX_LEN_0F42_P_2, VEX_LEN_0F44_P_2,
- VEX_LEN_0F45_P_2, VEX_LEN_0F46_P_2, VEX_LEN_0F47_P_2, VEX_LEN_0F4A_P_0,
- VEX_LEN_0F4A_P_2, VEX_LEN_0F4B_P_0, VEX_LEN_0F90_P_2, VEX_LEN_0F91_P_2,
- VEX_LEN_0F92_P_3, VEX_LEN_0F93_P_3, VEX_LEN_0F98_P_2, VEX_LEN_0F99_P_0,
- VEX_LEN_0F99_P_2, VEX_LEN_0F3A31_P_2, VEX_LEN_0F3A33_P_2, VEX_W_0F41_P_2_LEN_1,
- VEX_W_0F42_P_2_LEN_1, VEX_W_0F44_P_2_LEN_0, VEX_W_0F45_P_2_LEN_1,
- VEX_W_0F46_P_2_LEN_1, VEX_W_0F47_P_2_LEN_1, VEX_W_0F4A_P_0_LEN_1,
- VEX_W_0F4A_P_2_LEN_1, VEX_W_0F4B_P_0_LEN_1, VEX_W_0F90_P_2_LEN_0,
- VEX_W_0F91_P_2_LEN_0, VEX_W_0F92_P_3_LEN_0, VEX_W_0F93_P_3_LEN_0,
- VEX_W_0F98_P_2_LEN_0, VEX_W_0F99_P_0_LEN_0, VEX_W_0F99_P_2_LEN_0,
- VEX_W_0F3A31_P_2_LEN_0, VEX_W_0F3A33_P_2_LEN_0.
- (VEX_W enum): Add EVEX_W_0F6B_P_2, EVEX_W_0F6F_P_3, EVEX_W_0F7F_P_3,
- EVEX_W_0F3810_P_1, EVEX_W_0F3810_P_2, EVEX_W_0F3811_P_2, EVEX_W_0F3812_P_2,
- EVEX_W_0F3820_P_1, EVEX_W_0F3826_P_1, EVEX_W_0F3826_P_2, EVEX_W_0F3828_P_1,
- EVEX_W_0F3829_P_1, EVEX_W_0F382B_P_2, EVEX_W_0F3830_P_1, EVEX_W_0F3866_P_2,
- EVEX_W_0F3875_P_2, EVEX_W_0F3878_P_2, EVEX_W_0F3879_P_2, EVEX_W_0F387A_P_2,
- EVEX_W_0F387B_P_2, EVEX_W_0F387D_P_2, EVEX_W_0F388D_P_2, EVEX_W_0F3A3E_P_2,
- EVEX_W_0F3A3F_P_2, EVEX_W_0F3A42_P_2.
- (prefix_table): Add entries for new instructions.
- (vex_table) : Ditto.
- (vex_len_table): Ditto.
- (vex_w_table): Ditto.
- (intel_operand_size): Add db_mode, dw_mode, dqw_swap_mode,
- mask_bd_mode handling.
- (OP_E_register): Add dqw_swap_mode, dw_mode, db_mode, mask_bd_mode
- handling.
- (OP_E_memory): Add dqw_mode, dw_mode, dqw_swap_mode, dqb_mode, db_mode
- handling.
- (OP_G): Add db_mode, dw_mode, dqw_swap_mode, mask_bd_mode handling.
- (OP_EX): Add dqw_swap_mode handling.
- (OP_VEX): Add mask_bd_mode handling.
- (OP_Mask): Add mask_bd_mode handling.
- * i386-gen.c (cpu_flag_init): Add CPU_AVX512BW_FLAGS.
- (cpu_flags): Add CpuAVX512BW.
- * i386-init.h: Regenerated.
- * i386-opc.h (CpuAVX512BW): New.
- (i386_cpu_flags): Add cpuavx512bw.
- * i386-opc.tbl: Add AVX512BW instructions.
- * i386-tbl.h: Regenerate.
-
-2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
- Alexander Ivchenko <alexander.ivchenko@intel.com>
- Maxim Kuznetsov <maxim.kuznetsov@intel.com>
- Sergey Lega <sergey.s.lega@intel.com>
- Anna Tikhonova <anna.tikhonova@intel.com>
- Ilya Tocar <ilya.tocar@intel.com>
- Andrey Turetskiy <andrey.turetskiy@intel.com>
- Ilya Verbin <ilya.verbin@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-opc.tbl: Add AVX512VL and AVX512CD instructions.
- * i386-tbl.h: Regenerate.
-
-2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
- Alexander Ivchenko <alexander.ivchenko@intel.com>
- Maxim Kuznetsov <maxim.kuznetsov@intel.com>
- Sergey Lega <sergey.s.lega@intel.com>
- Anna Tikhonova <anna.tikhonova@intel.com>
- Ilya Tocar <ilya.tocar@intel.com>
- Andrey Turetskiy <andrey.turetskiy@intel.com>
- Ilya Verbin <ilya.verbin@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis.c (intel_operand_size): Support 128/256 length in
- vex_vsib_q_w_dq_mode.
- (OP_E_memory): Add ymmq_mode handling, handle new broadcast.
- * i386-gen.c (cpu_flag_init): Add CPU_AVX512VL_FLAGS.
- (cpu_flags): Add CpuAVX512VL.
- * i386-init.h: Regenerated.
- * i386-opc.h (CpuAVX512VL): New.
- (i386_cpu_flags): Add cpuavx512vl.
- (BROADCAST_1TO4, BROADCAST_1TO2): Define.
- * i386-opc.tbl: Add AVX512VL instructions.
- * i386-tbl.h: Regenerate.
-
-2014-07-20 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
- * or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h,
- * or1k-opinst.c: Regenerate.
-
-2014-07-08 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-dis-evex.h (EVEX_W_0F10_P_1_M_1): Fix vmovss.
- (EVEX_W_0F10_P_3_M_1): Fix vmovsd.
-
-2014-07-04 Alan Modra <amodra@gmail.com>
-
- * configure.ac: Rename from configure.in.
- * Makefile.in: Regenerate.
- * config.in: Regenerate.
+ (mod_table): Ditto.
+ (bad_opcode): Ditto.
+ (print_insn): Use prefix_requirement.
+ (FGRPd9_2, FGRPd9_4, FGRPd9_5, FGRPd9_6, FGRPd9_7, FGRPda_5, FGRPdb_4,
+ FGRPde_3, FGRPdf_4): Fill prefix_requirement field.
+ (float_reg): Ditto.
-2014-07-04 Alan Modra <amodra@gmail.com>
+2015-03-30 Mike Frysinger <vapier@gentoo.org>
- * configure.in: Include bfd/version.m4.
- (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
- (BFD_VERSION): Delete.
- * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
- * configure: Regenerate.
- * Makefile.in: Regenerate.
+ * d10v-opc.c (d10v_reg_name_cnt): Convert old style prototype.
-2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
- Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
- Pitchumani Sivanupandi <pitchumani.s@atmel.com>
- Soundararajan <Sounderarajan.D@atmel.com>
+2015-03-29 H.J. Lu <hongjiu.lu@intel.com>
- * avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
- (print_insn_avr): Do not select opcode if insn ISA is avrtiny and
- machine is not avrtiny.
+ * Makefile.in: Regenerated.
-2014-06-26 Philippe De Muyter <phdm@macqel.be>
+2015-03-25 Anton Blanchard <anton@samba.org>
- * or1k-desc.h (spr_field_masks): Add U suffix to the end of long
- constants.
+ * ppc-dis.c (disassemble_init_powerpc): Only initialise
+ powerpc_opcd_indices and vle_opcd_indices once.
-2014-06-12 Alan Modra <amodra@gmail.com>
+2015-03-25 Anton Blanchard <anton@samba.org>
- * or1k-asm.c, * or1k-desc.c, * or1k-desc.h, * or1k-dis.c,
- * or1k-ibld.c, * or1k-opc.c, * or1k-opc.h, * or1k-opinst.c: Regenerate.
+ * ppc-opc.c (powerpc_opcodes): Add slbfee.
-2014-06-10 H.J. Lu <hongjiu.lu@intel.com>
+2015-03-24 Terry Guo <terry.guo@arm.com>
- * i386-dis.c (fwait_prefix): New.
- (ckprefix): Set fwait_prefix.
- (print_insn): Properly print prefixes before fwait.
-
-2014-06-07 Alan Modra <amodra@gmail.com>
-
- * ppc-opc.c (UISIGNOPT): Define and use with cmpli.
-
-2014-06-05 Joel Brobecker <brobecker@adacore.com>
-
- * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
- bfd's development.sh.
- * Makefile.in, configure: Regenerate.
-
-2014-06-03 Nick Clifton <nickc@redhat.com>
-
- * msp430-dis.c (msp430_doubleoperand): Use extension_word to
- decide when extended addressing is being used.
-
-2014-06-02 Eric Botcazou <ebotcazou@adacore.com>
-
- * sparc-opc.c (cas): Disable for LEON.
- (casl): Likewise.
-
-2014-05-20 Alan Modra <amodra@gmail.com>
-
- * m68k-dis.c: Don't include setjmp.h.
-
-2014-05-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (ADDR16_PREFIX): Removed.
- (ADDR32_PREFIX): Likewise.
- (DATA16_PREFIX): Likewise.
- (DATA32_PREFIX): Likewise.
- (prefix_name): Updated.
- (print_insn): Simplify data and address size prefixes processing.
-
-2014-05-08 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
- * or1k-desc.c: Regenerated.
- * or1k-desc.h: Likewise.
- * or1k-opc.c: Likewise.
- * or1k-opc.h: Likewise.
- * or1k-opinst.c: Likewise.
-
-2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
-
- * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
- (I34): New define.
- (I36): New define.
- (I66): New define.
- (I68): New define.
- * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
- mips64r5.
- (parse_mips_dis_option): Update MSA and virtualization support to
- allow mips64r3 and mips64r5.
-
-2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
-
- * mips-opc.c (G3): Remove I4.
-
-2014-05-05 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/16893
- * i386-dis.c (twobyte_has_mandatory_prefix): New variable.
- (end_codep): Likewise.
- (mandatory_prefix): Likewise.
- (active_seg_prefix): Likewise.
- (ckprefix): Set active_seg_prefix to the active segment register
- prefix.
- (seg_prefix): Removed.
- (get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
- for prefix index. Ignore the index if it is invalid and the
- mandatory prefix isn't required.
- (print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
- mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
- in used_prefixes here. Don't print unused prefixes. Check
- active_seg_prefix for the active segment register prefix.
- Restore the DFLAG bit in sizeflag if the data size prefix is
- unused. Check the unused mandatory PREFIX_XXX prefixes
- (append_seg): Only print the segment register which gets used.
- (OP_E_memory): Check active_seg_prefix for the segment register
- prefix.
- (OP_OFF): Likewise.
- (OP_OFF64): Likewise.
- (OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
-
-2014-05-02 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/16886
- * config.in: Regenerated.
- * configure: Likewise.
- * configure.in: Check if sigsetjmp is available.
- * h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP.
- * i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn): Replace setjmp with OPCODES_SIGSETJMP.
- * ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP.
- * sysdep.h (OPCODES_SIGJMP_BUF): New macro.
- (OPCODES_SIGSETJMP): Likewise.
- (OPCODES_SIGLONGJMP): Likewise.
- * vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP.
- * xtensa-dis.c (dis_private): Replace jmp_buf with
- OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP.
- * z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF.
- (fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
- (print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP.
-
-2014-05-01 H.J. Lu <hongjiu.lu@intel.com>
-
- PR binutils/16891
- * i386-dis.c (print_insn): Handle prefixes before fwait.
-
-2014-04-26 Alan Modra <amodra@gmail.com>
+ * arm-dis.c (opcode32): Updated to use new arm feature struct.
+ (opcode16): Likewise.
+ (coprocessor_opcodes): Replace bit with feature struct.
+ (neon_opcodes): Likewise.
+ (arm_opcodes): Likewise.
+ (thumb_opcodes): Likewise.
+ (thumb32_opcodes): Likewise.
+ (print_insn_coprocessor): Likewise.
+ (print_insn_arm): Likewise.
+ (select_arm_features): Follow new feature struct.
- * po/POTFILES.in: Regenerate.
-
-2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
-
- * mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
- to allow the MIPS XPA ASE.
- (parse_mips_dis_option): Process the -Mxpa option.
- * mips-opc.c (XPA): New define.
- (mips_builtin_opcodes): Add MIPS XPA instructions and move the
- locations of the ctc0 and cfc0 instructions.
-
-2014-04-22 Christian Svensson <blue@cmd.nu>
-
- * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
- * configure.in: Likewise.
- * disassemble.c: Likewise.
- * or1k-asm.c: New file.
- * or1k-desc.c: New file.
- * or1k-desc.h: New file.
- * or1k-dis.c: New file.
- * or1k-ibld.c: New file.
- * or1k-opc.c: New file.
- * or1k-opc.h: New file.
- * or1k-opinst.c: New file.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
- * openrisc-asm.c: Delete.
- * openrisc-desc.c: Delete.
- * openrisc-desc.h: Delete.
- * openrisc-dis.c: Delete.
- * openrisc-ibld.c: Delete.
- * openrisc-opc.c: Delete.
- * openrisc-opc.h: Delete.
- * or32-dis.c: Delete.
- * or32-opc.c: Delete.
+2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
-2014-04-04 Ilya Tocar <ilya.tocar@intel.com>
+ * i386-dis.c (rm_table): Add clzero.
+ * i386-gen.c (cpu_flag_init): Add new CPU_ZNVER1_FLAGS.
+ Add CPU_CLZERO_FLAGS.
+ (cpu_flags): Add CpuCLZERO.
+ * i386-opc.h: Add CpuCLZERO.
+ * i386-opc.tbl: Add clzero.
+ * i386-init.h: Re-generated.
+ * i386-tbl.h: Re-generated.
- * i386-dis.c (rm_table): Add encls, enclu.
- * i386-gen.c (cpu_flag_init): Add CPU_SE1_FLAGS,
- (cpu_flags): Add CpuSE1.
- * i386-opc.h (enum): Add CpuSE1.
- (i386_cpu_flags): Add cpuse1.
- * i386-opc.tbl: Add encls, enclu.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
+2015-03-13 Andrew Bennett <andrew.bennett@imgtec.com>
-2014-04-02 Anthony Green <green@moxielogic.com>
+ * mips-opc.c (decode_mips_operand): Fix constraint issues
+ with u and y operands.
- * moxie-opc.c (moxie_form1_opc_info): Add sign-extension
- instructions, sex.b and sex.s.
+2015-03-13 Andrew Bennett <andrew.bennett@imgtec.com>
-2014-03-26 Jiong Wang <jiong.wang@arm.com>
+ * mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions.
- * aarch64-dis.c (aarch64_ext_ldst_elemlist): Check H/S undefined
- instructions.
+2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
-2014-03-20 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps,
- vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd,
- vscatterqps.
- * i386-tbl.h: Regenerate.
-
-2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
-
- * sparc-dis.c (v9_hpriv_reg_names): Names for %hstick_offset and
- %hstick_enable added.
-
-2014-03-19 Nick Clifton <nickc@redhat.com>
-
- * rx-decode.opc (bwl): Allow for bogus instructions with a size
- field of 3.
- (sbwl, ubwl, SCALE): Likewise.
- * rx-decode.c: Regenerate.
-
-2014-03-12 Alan Modra <amodra@gmail.com>
-
- * Makefile.in: Regenerate.
+ * s390-opc.c: Add new IBM z13 instructions.
+ * s390-opc.txt: Likewise.
-2014-03-05 Alan Modra <amodra@gmail.com>
+2015-03-10 Renlin Li <renlin.li@arm.com>
- Update copyright years.
+ * aarch64-tbl.h (aarch64_opcode_table): Remove strub, ldurb, ldursb,
+ stur, ldur, sturh, ldurh, ldursh, ldursw, prfum F_HAS_ALIAS flag and
+ related alias.
+ * aarch64-asm-2.c: Regenerate.
+ * aarch64-dis-2.c: Likewise.
+ * aarch64-opc-2.c: Likewise.
-2014-03-04 Heiher <r@hev.cc>
+2015-03-03 Jiong Wang <jiong.wang@arm.com>
- * mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
+ * arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
-2014-03-04 Richard Sandiford <rdsandiford@googlemail.com>
+2015-02-25 Oleg Endo <olegendo@gcc.gnu.org>
- * mips-opc.c (mips_builtin_opcodes): Move the udi* instructions
- so that they come after the Loongson extensions.
+ * sh-opc.h (clrs, sets): Mark as arch_sh3_nommu_up instead of
+ arch_sh_up.
+ (pref): Mark as arch_sh2a_nofpu_or_sh3_nommu_up instead of
+ arch_sh2a_nofpu_or_sh4_nommu_nofpu_up.
-2014-03-03 Alan Modra <amodra@gmail.com>
+2015-02-23 Vinay <Vinay.G@kpit.com>
- * i386-gen.c (process_copyright): Emit copyright notice on one line.
+ * rl78-decode.opc (MOV): Added space between two operands for
+ 'mov' instruction in index addressing mode.
+ * rl78-decode.c: Regenerate.
-2014-02-28 Alan Modra <amodra@gmail.com>
+2015-02-19 Pedro Alves <palves@redhat.com>
- * msp430-decode.c: Regenerate.
+ * microblaze-dis.h [__cplusplus]: Wrap in extern "C".
-2014-02-27 Jiong Wang <jiong.wang@arm.com>
+2015-02-10 Pedro Alves <palves@redhat.com>
+ Tom Tromey <tromey@redhat.com>
- * aarch64-tbl.h (aarch64_opcode_table): Replace IMM0 with
- FPIMM0 for fcmeq, fcmgt, fcmge, fcmlt and fcmle.
+ * microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
+ microblaze_and, microblaze_xor.
+ * microblaze-opc.h (opcodes): Adjust.
-2014-02-27 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-opc.c (print_register_offset_address): Call
- get_int_reg_name to prepare the register name.
-
-2014-02-25 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-opc.tbl: Remove wrong variant of vcvtps2ph
- * i386-tbl.h: Regenerate.
-
-2014-02-20 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-gen.c (cpu_flag_init): Add CPU_PREFETCHWT1_FLAGS/
- (cpu_flags): Add CpuPREFETCHWT1.
- * i386-init.h: Regenerate.
- * i386-opc.h (CpuPREFETCHWT1): New.
- (i386_cpu_flags): Add cpuprefetchwt1.
- * i386-opc.tbl: Cahnge CPU of prefetchwt1 from CpuAVX512PF to CpuPREFETCHWT1.
- * i386-tbl.h: Regenerate.
-
-2014-02-20 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-opc.tbl: Change CPU of vptestnmq, vptestnmd from CpuAVX512CD,
- to CpuAVX512F.
- * i386-tbl.h: Regenerate.
-
-2014-02-19 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (output_cpu_flags): Don't output trailing space.
- (output_opcode_modifier): Likewise.
- (output_operand_type): Likewise.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
-
- * i386-dis.c (MOD enum): Add MOD_0FC7_REG_3, MOD_0FC7_REG_4,
- MOD_0FC7_REG_5.
- (PREFIX enum): Add PREFIX_0FAE_REG_7.
- (reg_table): Add MOD_0FC7_REG_3, MOD_0FC7_REG_4 MOD_0FC7_REG_5.
- (prefix_table): Add clflusopt.
- (mod_table): Add xrstors, xsavec, xsaves.
- * i386-gen.c (cpu_flag_init): Add CPU_CLFLUSHOPT_FLAGS,
- CPU_XSAVES_FLAGS, CPU_XSAVEC_FLAGS.
- (cpu_flags): Add CpuClflushOpt, CpuXSAVES, CpuXSAVEC.
- * i386-init.h: Regenerate.
- * i386-opc.tbl: Add clflushopt, xrstors, xrstors64, xsaves,
- xsaves64, xsavec, xsavec64.
- * i386-tbl.h: Regenerate.
-
-2014-02-10 Alan Modra <amodra@gmail.com>
+2015-01-28 James Bowman <james.bowman@ftdichip.com>
+ * Makefile.am: Add FT32 files.
+ * configure.ac: Handle FT32.
+ * disassemble.c (disassembler): Call print_insn_ft32.
+ * ft32-dis.c: New file.
+ * ft32-opc.c: New file.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
* po/POTFILES.in: Regenerate.
- * po/opcodes.pot: Regenerate.
-
-2014-01-30 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
- Jan Beulich <jbeulich@suse.com>
-
- PR binutils/16490
- * i386-dis.c (OP_E_memory): Fix shift computation for
- vex_vsib_q_w_dq_mode.
-2014-01-09 Bradley Nelson <bradnelson@google.com>
- Roland McGrath <mcgrathr@google.com>
+2015-01-28 Kuan-Lin Chen <kuanlinchentw@gmail.com>
- * i386-dis.c (print_insn): Do not touch all_prefixes[-1] when
- last_rex_prefix is -1.
+ * nds32-asm.c (keyword_sr): Add new system registers.
-2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
+2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
- * i386-gen.c (process_copyright): Update copyright year to 2014.
+ * s390-dis.c (s390_extract_operand): Support vector register
+ operands.
+ (s390_print_insn_with_opcode): Support new operands types and add
+ new handling of optional operands.
+ * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
+ and include opcode/s390.h instead.
+ (struct op_struct): New field `flags'.
+ (insertOpcode, insertExpandedMnemonic): New parameter `flags'.
+ (dumpTable): Dump flags.
+ (main): Parse flags from the s390-opc.txt file. Add z13 as cpu
+ string.
+ * s390-opc.c: Add new operands types, instruction formats, and
+ instruction masks.
+ (s390_opformats): Add new formats for .insn.
+ * s390-opc.txt: Add new instructions.
-2014-01-03 Maciej W. Rozycki <macro@codesourcery.com>
+2015-01-01 Alan Modra <amodra@gmail.com>
- * nds32-asm.c (parse_operand): Fix out-of-range integer constant.
+ Update year range in copyright notice of all files.
-For older changes see ChangeLog-2013
+For older changes see ChangeLog-2014
\f
-Copyright (C) 2014 Free Software Foundation, Inc.
+Copyright (C) 2015 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
projects / deliverable / binutils-gdb.git / blobdiff