+Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c: Add some comments explaining the various
+ operands and such.
+
+ * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
+
+Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * m68k-dis.c (print_insn_arg): Handle new < and > operand
+ specifiers.
+
+ * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
+ operand specifiers in fmovm* instructions.
+
+Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * ppc-opc.c (insert_li): Give an error if the offset has the two
+ least significant bits set.
+
+Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_mips16): Separate the instruction from
+ the arguments with a tab, not a space.
+
+Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c (disasemble): Finish conversion to '$' as
+ register prefix.
+
+ * mn10300-opc.c (mn10300_opcodes): Fix mask field for
+ mov am,(imm32,sp).
+
+Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.12.
+
+ Add support for mips16 (16 bit MIPS implementation):
+ * mips16-opc.c: New file.
+ * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
+ (mips16_reg_names): New static array.
+ (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
+ after seeing a 16 bit symbol.
+ (print_insn_little_mips): Likewise.
+ (print_insn_mips16): New static function.
+ (print_mips16_insn_arg): New static function.
+ * mips-opc.c: Add jalx instruction.
+ * Makefile.in (mips16-opc.o): New target.
+ * configure.in: Use mips16-opc.o for bfd_mips_arch.
+ * configure: Rebuild.
+
+Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
+ operand specifiers in *save, *restore and movem* instructions.
+
+ * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
+ the coldfire.
+
+ * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
+ register operands for immediate arithmetic, not, neg, negx, and
+ set according to condition instructions.
+
+ * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
+ specifier of the effective-address operand in immediate forms of
+ arithmetic instructions. The specifier for the immediate operand
+ notes how and where the constant will be stored.
+
+Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
+ opcode.
+
+ * mn10300-dis.c (disassemble): Use '$' instead of '%' for
+ register prefix.
+
+ * mn10300-dis.c (disassemble): Prefix registers with '%'.
+
+Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c (disassemble): Handle register lists.
+
+ * mn10300-opc.c: Fix handling of register list operand for
+ "call", "ret", and "rets" instructions.
+
+ * mn10300-dis.c (disassemble): Print PC-relative and memory
+ addresses symbolically if possible.
+ * mn10300-opc.c: Distinguish between absolute memory addresses,
+ pc-relative offsets & random immediates.
+
+ * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
+ in 7 byte insns.
+ (disassemble): Handle SPLIT and EXTENDED operands.
+
+Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c: Rough cut at printing some operands.
+
+ * mn10300-dis.c: Start working on disassembler support.
+ * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
+
+ * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
+ list.
+ (mn10300_opcodes): Use REGS for register list in "movm" instructions.
+
+start-sanitize-d10v
+Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
+
+end-sanitize-d10v
+Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Demand parens around
+ register argument is calls and jmp instructions.
+
+Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
+ getx operand. Fix opcode for mulqu imm,dn.
+
+Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Hijack "bits" field
+ in MN10300_OPERAND_SPLIT operands for how many bits
+ appear in the basic insn word. Add IMM32_HIGH24,
+ IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
+ (mn10300_opcodes): Use new operands as needed.
+
+ * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
+ for bset, bclr, btst instructions.
+ (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
+
+ * mn10300-opc.c (mn10300_operands): Remove many redundant
+ operands. Update opcode table as appropriate.
+ (IMM32): Add MN10300_OPERAND_SPLIT flag.
+ (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
+
+Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
+ operands (for indexed load/stores). Fix bitpos for DI
+ operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
+ few instructions that insert immediates/displacements in the
+ middle of the instruction. Add IMM8E for 8 bit immediate in
+ the extended part of an instruction.
+ (mn10300_operands): Use new opcodes as appropriate.
+
+start-sanitize-d10v
+Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Declare the trap instruction
+ sequential so the assembler never parallelizes it with
+ other instructions.
+
+end-sanitize-d10v
+Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
+ a data/address register that appears in register field 0
+ and register field 1.
+ (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
+
+Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
+ standard disassembly.
+
+ * alpha-opc.c (alpha_operands): Rearrange flags slot.
+ (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
+ Recategorize PALcode instructions.
+
+start-sanitize-v850
+Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Add relaxing "jbr".
+
+end-sanitize-v850
+Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
+ there are no operand types.
+
+start-sanitize-v850
+Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (D9_RELAX): Renamed from D9, all references
+ changed.
+ (v850_operands): Make sure D22 immediately follows D9_RELAX.
+
+end-sanitize-v850
+Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
+
+start-sanitize-v850
+Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
+ and sst.w instructions.
+
+ * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
+ "bCC"instructions).
+
+end-sanitize-v850
+Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Use a tab between the instruction
+ and the arguments.
+
+Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * ppc-opc.c (PPCPWR2): Define.
+ (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
+ it.
+
+Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
+ field for movhu instruction.
+start-sanitize-v850
+
+ * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
+ cast value to "long" not "signed long" to keep hpux10
+ compiler quiet.
+end-sanitize-v850
+
+Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
+ for mov (abs16),DN.
+
+ * mn10300-opc.c (FMT*): Remove definitions.
+
+ * mn10300-opc.c (mn10300_opcodes): Fix destination register
+ for shift-by-register opcodes.
+
+ * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
+ into [AD][MN][01] for encoding the position of the register
+ in the opcode.
+
+Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
+ "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
+
+Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
+ Fix various typos. Add "PAREN" operand.
+ (MEM, MEM2): Define.
+ (mn10300_opcodes): Surround all memory addresses with "PAREN"
+ operands. Fix several typos.
+
+ * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
+ changes.
+
+Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (FMT_XX): Renumber starting at one.
+ (mn10300_operands): Rough cut. Enough to parse "mov" instructions
+ at this time.
+ (mn10300_opcodes): Break opcode format out into its own field.
+ Update many operand fields to deal with signed vs unsigned
+ issues. Fix one or two typos in the "mov" instruction
+ opcode, mask and/or operand fields.
+
+Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
+ m68851 wasn't reset.
+
+Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
+ all opcodes. Very rough cut at operands for all opcodes.
+
+ * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
+ opcode table.
+
+Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-opc.c, mn10300-opc.c: New files.
+ * mn10200-dis.c, mn10300-dis.c: New files.
+ * mn10x00-opc.c, mn10x00-dis.c: Deleted.
+ * disassemble.c: Break mn10x00 support into 10200 and 10300
+ support.
+ * configure.in: Likewise.
+ * configure: Rebuilt.
+
+Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
+
+Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
+ MN10x00 processors.
+ * disassemble (ARCH_mn10x00): Define.
+ (disassembler): Handle bfd_arch_mn10x00.
+ * configure.in: Recognize bfd_mn10x00_arch.
+ * configure: Rebuilt.
+
+Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
+ accordingly. Don't declare functions using op_rtn.
+
+start-sanitize-v850
+Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
+ params to be more standard.
+ * (disassemble): Print absolute addresses and symbolic names for
+ branch and jump targets.
+ * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
+ bit operands.
+ * (v850_opcodes): Add breakpoint insn.
+
+end-sanitize-v850
+Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Move the fmovemx data register cases before the
+ other cases, so that they get recognized before the data register
+ does gets treated as a degenerate register list.
+
+Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-opc.c: Add a case for "div" and "divu" with two registers
+ and a destination of $0.
+
+Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
+
+ * mips-dis.c (print_insn_arg): Add prototype.
+ (_print_insn_mips): Ditto.
+
+Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_arg): Print condition code registers as
+ $fccN.
+
+Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
+
start-sanitize-v850
+Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-dis.c (disassemble): Make static. Provide prototype.
+
+Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (insert_d9, insert_d22): Fix boundary case
+ in range checks.
+
Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
+ * v850-dis.c (disassemble): Handle insertion of ',', '[' and
+ ']' characters into the output stream.
+ * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
+ Add "memop" field to all opcodes (for the disassembler).
+ Reorder opcodes so that "nop" comes before "mov" and "jr"
+ comes before "jarl".
+
+ * v850-dis.c (print_insn_v850): Fix typo in last change.
+
+ * v850-dis.c (print_insn_v850): Properly handle disassembling
+ a two byte insn at the end of a memory region when the memory
+ region's size is only two byte aligned.
+
+ * v850-dis.c (v850_cc_names): Fix stupid thinkos.
+
+ * v850-dis.c (v850_reg_names): Define.
+ (v850_sreg_names, v850_cc_names): Likewise.
+ (disassemble): Very rough cut at printing operands (unformatted).
+
+ * v850-opc.c (BOP_MASK): Fix.
+ (v850_opcodes): Fix mask for jarl and jr.
+
+ * v850-dis.c: New file. Skeleton for disassembler support.
+ * Makefile.in Remove v850 references, they're not needed here
+ and they weren't being sanitized away.
+ * configure.in: Add v850-dis.o when building v850 toolchains.
+ * configure: Rebuilt.
+ * disassemble.c (disassembler): Call v850 disassembler.
+
* v850-opc.c (insert_d8_7, extract_d8_7): New functions.
(insert_d8_6, extract_d8_6): New functions.
(v850_operands): Rename D7S to D7; operand for D7 is unsigned.