+start-sanitize-tic80
+Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
+ New macros for building vector instruction opcodes.
+ (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
+ FMT_LI, which were unused. The field is now a flags field.
+ Remove some opcodes that are possible, but illegal, such
+ as long immediate instructions with doubles for immediate
+ values. Add "vadd" and "vld" instructions.
+
+Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-opc.c (tic80_operands): Reorder some table entries to make
+ the order more logical. Move the shift alias instructions ("rotl",
+ "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
+ interspersed with the regular sr.x and sl.x instructions. Add
+ and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
+ "sub", "subu", "swcr", and "trap".
+
+Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
+ (OFF_SL_PC): Renamed from OFF_SL.
+ (OFF_SS_BR): New operand type for base relative operand.
+ (OFF_SL_BR): New operand type for base relative operand.
+ (REG_BASE): New operand type for base register operand.
+ (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
+ "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
+ "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
+ instructions.
+ * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
+ 10 char field, padded with spaces on rhs, rather than a string
+ followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
+ than old TIC80_OPERAND_RELATIVE. Add support for new
+ TIC80_OPERAND_BASEREL flag bit.
+
+Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-dis.c (print_insn_tic80): Print floating point operands
+ as floats.
+ * tic80-opc.c (SPFI): Add single precision floating point
+ immediate operand type.
+ (ROTATE): Add rotate operand type for shifts.
+ (ENDMASK): Add for shifts.
+ (n): Macro for the 'n' bit.
+ (i): Macro for the 'i' bit.
+ (PD): Macro for the 'PD' field.
+ (P2): Macro for the 'P2' field.
+ (P1): Macro for the 'P1' field.
+ (tic80_opcodes): Add entries for "exts", "extu", "fadd",
+ "fcmp", and "fdiv".
+
+end-sanitize-tic80
+Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-dis.c (disassemble): Mask off unwanted bits after
+ adding in current address for pc-relative operands.
+
+start-sanitize-tic80
+Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
+ (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
+ * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
+ changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
+ (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
+ REG_BASE_M_SI, REG_BASE_M_LI respectively.
+ (REG_SCALED, LSI_SCALED): New operand types.
+ (E): New macro for 'E' bit at bit 27.
+ (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
+ opcodes, including the various size flavors (b,h,w,d) for
+ the direct load and store instructions.
+
+Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
+ in an instruction.
+ * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
+ Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
+ * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
+ (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
+ (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
+ masks with "MASK_* & ~M_*" to get the M bit reset.
+ (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
+
+Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
+
+ * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
+ correctly. Add support for printing TIC80_OPERAND_BITNUM and
+ TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
+ form.
+ * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
+ CC, SICR, and LICR table entries.
+ (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
+ "bcnd", and "brcr" opcodes.
+
+end-sanitize-tic80
+Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
+
+ * ppc-opc.c (powerpc_operands): Make comment match the
+ actual fields (no shift field).
+ * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
+start-sanitize-tic80
+ * tic80-dis.c (print_insn_tic80): Replace abort stub with a
+ partial implementation, work in progress.
+ * tic80-opc.c (tic80_operands): Begin construction operands table.
+ (tic80_opcodes): Continue populating opcodes table and start
+ filling in the operand indices.
+ (tic80_num_opcodes): Add this.
+end-sanitize-tic80
+
+Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Add #B case for moveq.
+
+Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c (disassemble): Make sure all variables are initialized
+ before they are used.
+
+start-sanitize-v850
+Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Put curly-braces around operands
+ for "breakpoint" instruction.
+
+end-sanitize-v850
+Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
+ (dep): Use ALL_CFLAGS rather than CFLAGS.
+
+start-sanitize-v850
+Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
+ flag.
+
+end-sanitize-v850
+Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
+start-sanitize-tic80
+ (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
+end-sanitize-tic80
+
+Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips16-opc.c: Add "abs".
+
+start-sanitize-tic80
+Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
+ * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
+ (disassembler): Add bfd_arch_tic80 support to set disassemble
+ to print_insn_tic80.
+ * tic80-dis.c (print_insn_tic80): Add stub.
+
+Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
+
+ * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
+ * configure: Regenerate with autoconf.
+ * tic80-dis.c: Add file.
+ * tic80-opc.c: Add file.
+
+end-sanitize-tic80
+start-sanitize-d10v
+Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
+
+end-sanitize-d10v
+Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-opc.c (mn10200_operands): Add SIMM16N.
+ (mn10200_opcodes): Use it for some logicals and btst insns.
+ Add "break" and "trap" instructions.
+
+ * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
+
+ * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
+
+Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_mips16_insn_arg): The base address of a PC
+ relative load or add now depends upon whether the instruction is
+ in a delay slot.
+
+Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10200-dis.c: Finish writing disassembler.
+ * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
+ Fix mask for "jmp (an)".
+
+ * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
+ handle endianness issues for mn10300.
+
+ * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
+
Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
* mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
projects / deliverable / binutils-gdb.git / blobdiff