-dnl aclocal.m4 generated automatically by aclocal 1.2
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
sinclude(../bfd/acinclude.m4)
+dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_DEFUN([AM_DISABLE_SHARED],)
+AC_SUBST(LIBTOOL)
+])
+
+dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
+])
+
+#serial 1
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN(AC_ISC_POSIX,
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AM_PROG_INSTALL])
+[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
-AM_SANITY_CHECK
-AC_ARG_PROGRAM
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_PROG_MAKE_SET])
-
-
-# serial 1
-
-AC_DEFUN(AM_PROG_INSTALL,
-[AC_REQUIRE([AC_PROG_INSTALL])
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-AC_SUBST(INSTALL_SCRIPT)dnl
-])
+AC_REQUIRE([AC_PROG_MAKE_SET])])
#
# Check to make sure that the build environment is sane.
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$@" = "X"; then
+ if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
test "[$]2" = conftestfile
)
then
fi
AC_SUBST($1)])
-
-# serial 9 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AC_PROG_LN_S])
-
-# Always use our own libtool.
-LIBTOOL='$(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)
-
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared libraries [default=yes]],
-[case "$enableval" in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *opcodes*) enable_shared=yes ;;
- *) shared=no ;;
-esac])
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[ --enable-static build static libraries [default=yes]],
-[if test "$enableval" = no; then
- enable_static=no
-else
- enable_static=yes
-fi])
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
-
-libtool_flags="$libtool_shared$libtool_static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-[case "$host" in
-*-*-irix6*)
- ac_save_CFLAGS="$CFLAGS"
- # -n32 always needs to be added to the linker when using GCC.
- test "$ac_cv_prog_gcc" = yes && CFLAGS="$CFLAGS -n32"
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
- CFLAGS="$ac_save_CFLAGS"
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- CFLAGS="$CFLAGS -belf"
- ;;
-esac]
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-])
-
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-if test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[case "$LD" in
- "")
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/ld"; then
- ac_cv_path_LD="$ac_dir/ld"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- test "$with_gnu_ld" = yes && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- ;;
- *)
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
- ;;
-esac])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
-])
-
-AC_DEFUN(AM_PROG_LD_GNU,
-[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+ MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
-# Check to see if we're running under Cygwin32, without using
-# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes".
-# Otherwise set it to "no".
-
-dnl AM_CYGWIN32()
-AC_DEFUN(AM_CYGWIN32,
-[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32,
-[AC_TRY_COMPILE(,[return __CYGWIN32__;],
-am_cv_cygwin32=yes, am_cv_cygwin32=no)
-rm -f conftest*])
-CYGWIN32=
-test "$am_cv_cygwin32" = yes && CYGWIN32=yes])
+# Define a conditional.
-# Check to see if we're running under Win32, without using
-# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe".
-# Otherwise set it to "".
-
-dnl AM_EXEEXT()
-dnl This knows we add .exe if we're building in the Cygwin32
-dnl environment. But if we're not, then it compiles a test program
-dnl to see if there is a suffix for executables.
-AC_DEFUN(AM_EXEEXT,
-[AC_REQUIRE([AM_CYGWIN32])
-AC_REQUIRE([AM_MINGW32])
-AC_MSG_CHECKING([for executable suffix])
-AC_CACHE_VAL(am_cv_exeext,[
-if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then
-am_cv_exeext=.exe
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
-rm -f am_c_test*])
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
-fi
-EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-AC_MSG_RESULT(${am_cv_exeext})
-AC_SUBST(EXEEXT)])
-
-# Check to see if we're running under Mingw, without using
-# AC_CANONICAL_*. If so, set output variable MINGW32 to "yes".
-# Otherwise set it to "no".
-
-dnl AM_MINGW32()
-AC_DEFUN(AM_MINGW32,
-[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32,
-[AC_TRY_COMPILE(,[return __MINGW32__;],
-am_cv_mingw32=yes, am_cv_mingw32=no)
-rm -f conftest*])
-MINGW32=
-test "$am_cv_mingw32" = yes && MINGW32=yes])
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
projects / deliverable / binutils-gdb.git / blobdiff