/* Instruction printing code for the ARC.
- Copyright (C) 1994-2016 Free Software Foundation, Inc.
+ Copyright (C) 1994-2020 Free Software Foundation, Inc.
Contributed by Claudiu Zissulescu (claziss@synopsys.com)
struct arc_operand_iterator
{
- enum
- {
- OPERAND_ITERATOR_STANDARD,
- OPERAND_ITERATOR_LONG
- } mode;
-
- /* The array of 32-bit values that make up this instruction. All
- required values have been pre-loaded into this array during the
- find_format call. */
- unsigned *insn;
-
- union
- {
- struct
- {
- /* The opcode this iterator is operating on. */
- const struct arc_opcode *opcode;
+ /* The complete instruction value to extract operands from. */
+ unsigned long long insn;
- /* The index into the opcodes operand index list. */
- const unsigned char *opidx;
- } standard;
+ /* The LIMM if this is being tracked separately. This field is only
+ valid if we find the LIMM operand in the operand list. */
+ unsigned limm;
- struct
- {
- /* The long instruction opcode this iterator is operating on. */
- const struct arc_long_opcode *long_opcode;
+ /* The opcode this iterator is operating on. */
+ const struct arc_opcode *opcode;
+
+ /* The index into the opcodes operand index list. */
+ const unsigned char *opidx;
+};
+
+/* A private data used by ARC decoder. */
+struct arc_disassemble_info
+{
+ /* The current disassembled arc opcode. */
+ const struct arc_opcode *opcode;
+
+ /* Instruction length w/o limm field. */
+ unsigned insn_len;
- /* Two indexes into the opcodes operand index lists. */
- const unsigned char *opidx_base, *opidx_limm;
- } long_insn;
- } state;
+ /* TRUE if we have limm. */
+ bfd_boolean limm_p;
+
+ /* LIMM value, if exists. */
+ unsigned limm;
+
+ /* Condition code, if exists. */
+ unsigned condition_code;
+
+ /* Writeback mode. */
+ unsigned writeback_mode;
+
+ /* Number of operands. */
+ unsigned operands_count;
+
+ struct arc_insn_operand operands[MAX_INSN_ARGS];
};
/* Globals variables. */
"r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39",
"r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47",
"r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55",
- "r56", "r57", "ACCL", "ACCH", "lp_count", "rezerved", "LIMM", "pcl"
+ "r56", "r57", "r58", "r59", "lp_count", "reserved", "LIMM", "pcl"
};
+static const char * const addrtypenames[ARC_NUM_ADDRTYPES] =
+{
+ "bd", "jid", "lbd", "mbd", "sd", "sm", "xa", "xd",
+ "cd", "cbd", "cjid", "clbd", "cm", "csd", "cxa", "cxd"
+};
+
+static int addrtypenames_max = ARC_NUM_ADDRTYPES - 1;
+
+static const char * const addrtypeunknown = "unknown";
+
/* This structure keeps track which instruction class(es)
should be ignored durring disassembling. */
disassembling. */
static linkclass decodelist = NULL;
+/* ISA mask value enforced via disassembler info options. ARC_OPCODE_NONE
+ value means that no CPU is enforced. */
+
+static unsigned enforced_isa_mask = ARC_OPCODE_NONE;
+
+/* True if we want to print using only hex numbers. */
+static bfd_boolean print_hex = FALSE;
+
/* Macros section. */
#ifdef DEBUG
(info->endian == BFD_ENDIAN_LITTLE ? bfd_getm32 (bfd_getl32 (buf)) \
: bfd_getb32 (buf))
-#define BITS(word,s,e) (((word) << (sizeof (word) * 8 - 1 - e)) >> \
- (s + (sizeof (word) * 8 - 1 - e)))
-#define OPCODE(word) (BITS ((word), 27, 31))
-
-#define OPCODE_AC(word) (BITS ((word), 11, 15))
+#define BITS(word,s,e) (((word) >> (s)) & ((1ull << ((e) - (s)) << 1) - 1))
+#define OPCODE_32BIT_INSN(word) (BITS ((word), 27, 31))
/* Functions implementation. */
-/* Return TRUE when two classes are not opcode conflicting. */
-
+/* Initialize private data. */
static bfd_boolean
-is_compatible_p (insn_class_t classA,
- insn_subclass_t sclassA,
- insn_class_t classB,
- insn_subclass_t sclassB)
+init_arc_disasm_info (struct disassemble_info *info)
{
- if (classA == DSP && sclassB == DPX)
- return FALSE;
- if (sclassA == DPX && classB == DSP)
+ struct arc_disassemble_info *arc_infop
+ = calloc (sizeof (*arc_infop), 1);
+
+ if (arc_infop == NULL)
return FALSE;
+
+ info->private_data = arc_infop;
return TRUE;
}
disassembled. */
static bfd_boolean
-skip_this_opcode (const struct arc_opcode * opcode,
- struct disassemble_info * info)
+skip_this_opcode (const struct arc_opcode *opcode)
{
linkclass t = decodelist;
- bfd_boolean addme = TRUE;
/* Check opcode for major 0x06, return if it is not in. */
- if (OPCODE (opcode->opcode) != 0x06)
+ if (arc_opcode_len (opcode) == 4
+ && (OPCODE_32BIT_INSN (opcode->opcode) != 0x06
+ /* Can be an APEX extensions. */
+ && OPCODE_32BIT_INSN (opcode->opcode) != 0x07))
return FALSE;
- while (t != NULL
- && is_compatible_p (t->insn_class, t->subclass,
- opcode->insn_class, opcode->subclass))
+ /* or not a known truble class. */
+ switch (opcode->insn_class)
+ {
+ case FLOAT:
+ case DSP:
+ case ARITH:
+ case MPY:
+ break;
+ default:
+ return FALSE;
+ }
+
+ while (t != NULL)
{
if ((t->insn_class == opcode->insn_class)
&& (t->subclass == opcode->subclass))
- addme = FALSE;
+ return FALSE;
t = t->nxt;
}
- /* If we found an incompatibility then we must skip. */
- if (t != NULL)
- return TRUE;
-
- /* Even if we do not precisely know the if the right mnemonics
- is correctly displayed, keep the disassmbled code class
- consistent. */
- if (addme)
- {
- switch (opcode->insn_class)
- {
- case DSP:
- case FLOAT:
- /* Add to the conflict list only the classes which
- counts. */
- add_to_decodelist (opcode->insn_class, opcode->subclass);
- /* Warn if we have to decode an opcode and no preferred
- classes have been chosen. */
- info->fprintf_func (info->stream, _("\n\
-Warning: disassembly may be wrong due to guessed opcode class choice.\n\
- Use -M<class[,class]> to select the correct opcode class(es).\n\t\t\t\t"));
- break;
- default:
- break;
- }
- }
- return FALSE;
+ return TRUE;
}
static bfd_vma
static const struct arc_opcode *
find_format_from_table (struct disassemble_info *info,
const struct arc_opcode *arc_table,
- unsigned *insn,
+ unsigned long long insn,
unsigned int insn_len,
unsigned isa_mask,
bfd_boolean *has_limm,
{
unsigned int i = 0;
const struct arc_opcode *opcode = NULL;
+ const struct arc_opcode *t_op = NULL;
const unsigned char *opidx;
const unsigned char *flgidx;
+ bfd_boolean warn_p = FALSE;
do
{
opcode = &arc_table[i++];
- if (ARC_SHORT (opcode->mask) && (insn_len == 2))
- {
- if (OPCODE_AC (opcode->opcode) != OPCODE_AC (insn[0]))
- continue;
- }
- else if (!ARC_SHORT (opcode->mask) && (insn_len == 4))
- {
- if (OPCODE (opcode->opcode) != OPCODE (insn[0]))
- continue;
- }
- else
+ if (!(opcode->cpu & isa_mask))
continue;
- if ((insn[0] ^ opcode->opcode) & opcode->mask)
+ if (arc_opcode_len (opcode) != (int) insn_len)
continue;
- if (!(opcode->cpu & isa_mask))
+ if ((insn & opcode->mask) != opcode->opcode)
continue;
*has_limm = FALSE;
/* Possible candidate, check the operands. */
for (opidx = opcode->operands; *opidx; opidx++)
{
- int value;
+ int value, limmind;
const struct arc_operand *operand = &arc_operands[*opidx];
if (operand->flags & ARC_OPERAND_FAKE)
continue;
if (operand->extract)
- value = (*operand->extract) (insn[0], &invalid);
+ value = (*operand->extract) (insn, &invalid);
else
- value = (insn[0] >> operand->shift) & ((1 << operand->bits) - 1);
+ value = (insn >> operand->shift) & ((1ull << operand->bits) - 1);
/* Check for LIMM indicator. If it is there, then make sure
we pick the right format. */
+ limmind = (isa_mask & ARC_OPCODE_ARCV2) ? 0x1E : 0x3E;
if (operand->flags & ARC_OPERAND_IR
&& !(operand->flags & ARC_OPERAND_LIMM))
{
if ((value == 0x3E && insn_len == 4)
- || (value == 0x1E && insn_len == 2))
+ || (value == limmind && insn_len == 2))
{
invalid = TRUE;
break;
/* Check first the extensions. */
if (cl_flags->flag_class & F_CLASS_EXTEND)
{
- value = (insn[0] & 0x1F);
+ value = (insn & 0x1F);
if (arcExtMap_condCodeName (value))
continue;
}
+ /* Check for the implicit flags. */
+ if (cl_flags->flag_class & F_CLASS_IMPLICIT)
+ continue;
+
for (flgopridx = cl_flags->flags; *flgopridx; ++flgopridx)
{
const struct arc_flag_operand *flg_operand =
&arc_flag_operands[*flgopridx];
- value = (insn[0] >> flg_operand->shift)
+ value = (insn >> flg_operand->shift)
& ((1 << flg_operand->bits) - 1);
if (value == flg_operand->code)
foundA = 1;
continue;
if (insn_len == 4
- && overlaps
- && skip_this_opcode (opcode, info))
- continue;
+ && overlaps)
+ {
+ warn_p = TRUE;
+ t_op = opcode;
+ if (skip_this_opcode (opcode))
+ continue;
+ }
/* The instruction is valid. */
return opcode;
}
while (opcode->mask);
- return NULL;
-}
-
-/* Find long instructions matching values in INSN array. */
-
-static const struct arc_long_opcode *
-find_format_long_instructions (unsigned *insn,
- unsigned int *insn_len,
- unsigned isa_mask,
- bfd_vma memaddr,
- struct disassemble_info *info)
-{
- unsigned int i;
- unsigned limm = 0;
- bfd_boolean limm_loaded = FALSE;
-
- for (i = 0; i < arc_num_long_opcodes; ++i)
+ if (warn_p)
{
- bfd_byte buffer[4];
- int status;
- const struct arc_opcode *opcode;
-
- opcode = &arc_long_opcodes[i].base_opcode;
-
- if (ARC_SHORT (opcode->mask) && (*insn_len == 2))
- {
- if (OPCODE_AC (opcode->opcode) != OPCODE_AC (insn[0]))
- continue;
- }
- else if (!ARC_SHORT (opcode->mask) && (*insn_len == 4))
- {
- if (OPCODE (opcode->opcode) != OPCODE (insn[0]))
- continue;
- }
- else
- continue;
-
- if ((insn[0] ^ opcode->opcode) & opcode->mask)
- continue;
-
- if (!(opcode->cpu & isa_mask))
- continue;
-
- if (!limm_loaded)
- {
- status = (*info->read_memory_func) (memaddr + *insn_len, buffer,
- 4, info);
- if (status != 0)
- return NULL;
-
- limm = ARRANGE_ENDIAN (info, buffer);
- limm_loaded = TRUE;
- }
-
- /* Check the second word using the mask and template. */
- if ((limm & arc_long_opcodes[i].limm_mask)
- != arc_long_opcodes[i].limm_template)
- continue;
-
- (*insn_len) += 4;
- insn[1] = limm;
- return &arc_long_opcodes[i];
+ info->fprintf_func (info->stream,
+ _("\nWarning: disassembly may be wrong due to "
+ "guessed opcode class choice.\n"
+ "Use -M<class[,class]> to select the correct "
+ "opcode class(es).\n\t\t\t\t"));
+ return t_op;
}
return NULL;
/* Find opcode for INSN, trying various different sources. The instruction
length in INSN_LEN will be updated if the instruction requires a LIMM
- extension, and the additional values loaded into the INSN array (which
- must be big enough).
+ extension.
A pointer to the opcode is placed into OPCODE_RESULT, and ITER is
- initialised, ready to iterate over the operands of the found opcode.
+ initialised, ready to iterate over the operands of the found opcode. If
+ the found opcode requires a LIMM then the LIMM value will be loaded into a
+ field of ITER.
This function returns TRUE in almost all cases, FALSE is reserved to
- indicate an error (failing to find an opcode is not an error) a
- returned result of FALSE would indicate that the disassembler can't
- continue.
+ indicate an error (failing to find an opcode is not an error) a returned
+ result of FALSE would indicate that the disassembler can't continue.
- If no matching opcode is found then the returned result will be TRUE,
- the value placed into OPCODE_RESULT will be NULL, ITER will be
- undefined, and INSN_LEN will be unchanged.
+ If no matching opcode is found then the returned result will be TRUE, the
+ value placed into OPCODE_RESULT will be NULL, ITER will be undefined, and
+ INSN_LEN will be unchanged.
- If a matching opcode is found, then the returned result will be TRUE,
- the opcode pointer is placed into OPCODE_RESULT, INSN_LEN will be
- increased by 4 if the instruction requires a LIMM, and the LIMM value
- will have been loaded into the INSN[1]. Finally, ITER will have been
- initialised so that calls to OPERAND_ITERATOR_NEXT will iterate over
- the opcode's operands. */
+ If a matching opcode is found, then the returned result will be TRUE, the
+ opcode pointer is placed into OPCODE_RESULT, INSN_LEN will be increased by
+ 4 if the instruction requires a LIMM, and the LIMM value will have been
+ loaded into a field of ITER. Finally, ITER will have been initialised so
+ that calls to OPERAND_ITERATOR_NEXT will iterate over the opcode's
+ operands. */
static bfd_boolean
find_format (bfd_vma memaddr,
- unsigned * insn,
+ unsigned long long insn,
unsigned int * insn_len,
unsigned isa_mask,
struct disassemble_info * info,
{
const struct arc_opcode *opcode = NULL;
bfd_boolean needs_limm;
- const extInstruction_t *einsn;
+ const extInstruction_t *einsn, *i;
+ unsigned limm = 0;
+ struct arc_disassemble_info *arc_infop = info->private_data;
/* First, try the extension instructions. */
- einsn = arcExtMap_insn (OPCODE (insn[0]), insn[0]);
- if (einsn != NULL)
+ if (*insn_len == 4)
{
- const char *errmsg = NULL;
-
- opcode = arcExtMap_genOpcode (einsn, isa_mask, &errmsg);
- if (opcode == NULL)
+ einsn = arcExtMap_insn (OPCODE_32BIT_INSN (insn), insn);
+ for (i = einsn; (i != NULL) && (opcode == NULL); i = i->next)
{
- (*info->fprintf_func) (info->stream, "\
+ const char *errmsg = NULL;
+
+ opcode = arcExtMap_genOpcode (i, isa_mask, &errmsg);
+ if (opcode == NULL)
+ {
+ (*info->fprintf_func) (info->stream, "\
An error occured while generating the extension instruction operations");
- *opcode_result = NULL;
- return FALSE;
- }
+ *opcode_result = NULL;
+ return FALSE;
+ }
- opcode = find_format_from_table (info, opcode, insn, *insn_len,
- isa_mask, &needs_limm, FALSE);
+ opcode = find_format_from_table (info, opcode, insn, *insn_len,
+ isa_mask, &needs_limm, FALSE);
+ }
}
/* Then, try finding the first match in the opcode table. */
}
else
{
- insn[1] = ARRANGE_ENDIAN (info, buffer);
+ limm = ARRANGE_ENDIAN (info, buffer);
*insn_len += 4;
}
}
- if (opcode == NULL)
- {
- const struct arc_long_opcode *long_opcode;
-
- /* No instruction found yet, try the long instructions. */
- long_opcode =
- find_format_long_instructions (insn, insn_len, isa_mask,
- memaddr, info);
-
- if (long_opcode != NULL)
- {
- iter->mode = OPERAND_ITERATOR_LONG;
- iter->insn = insn;
- iter->state.long_insn.long_opcode = long_opcode;
- iter->state.long_insn.opidx_base =
- long_opcode->base_opcode.operands;
- iter->state.long_insn.opidx_limm =
- long_opcode->operands;
- opcode = &long_opcode->base_opcode;
- }
- }
- else
+ if (opcode != NULL)
{
- iter->mode = OPERAND_ITERATOR_STANDARD;
iter->insn = insn;
- iter->state.standard.opcode = opcode;
- iter->state.standard.opidx = opcode->operands;
+ iter->limm = limm;
+ iter->opcode = opcode;
+ iter->opidx = opcode->operands;
}
*opcode_result = opcode;
+
+ /* Update private data. */
+ arc_infop->opcode = opcode;
+ arc_infop->limm = (needs_limm) ? limm : 0;
+ arc_infop->limm_p = needs_limm;
+
return TRUE;
}
static void
print_flags (const struct arc_opcode *opcode,
- unsigned *insn,
+ unsigned long long *insn,
struct disassemble_info *info)
{
const unsigned char *flgidx;
unsigned int value;
+ struct arc_disassemble_info *arc_infop = info->private_data;
/* Now extract and print the flags. */
for (flgidx = opcode->flags; *flgidx; flgidx++)
const struct arc_flag_operand *flg_operand =
&arc_flag_operands[*flgopridx];
+ /* Implicit flags are only used for the insn decoder. */
+ if (cl_flags->flag_class & F_CLASS_IMPLICIT)
+ {
+ if (cl_flags->flag_class & F_CLASS_COND)
+ arc_infop->condition_code = flg_operand->code;
+ else if (cl_flags->flag_class & F_CLASS_WB)
+ arc_infop->writeback_mode = flg_operand->code;
+ else if (cl_flags->flag_class & F_CLASS_ZZ)
+ info->data_size = flg_operand->code;
+ continue;
+ }
+
if (!flg_operand->favail)
continue;
info->insn_type = dis_condjsr;
else if (info->insn_type == dis_branch)
info->insn_type = dis_condbranch;
+ arc_infop->condition_code = flg_operand->code;
}
+ /* Check for the write back modes. */
+ if (cl_flags->flag_class & F_CLASS_WB)
+ arc_infop->writeback_mode = flg_operand->code;
+
(*info->fprintf_func) (info->stream, "%s", flg_operand->name);
}
}
return NULL;
}
+/* Convert a value representing an address type to a string used to refer to
+ the address type in assembly code. */
+
+static const char *
+get_addrtype (int value)
+{
+ if (value < 0 || value > addrtypenames_max)
+ return addrtypeunknown;
+
+ return addrtypenames[value];
+}
+
/* Calculate the instruction length for an instruction starting with MSB
and LSB, the most and least significant byte. The ISA_MASK is used to
filter the instructions considered to only those that are part of the
{
bfd_byte minor_opcode = lsb & 0x1f;
- if (minor_opcode < 4)
- return 2;
+ if (minor_opcode < 4)
+ return 6;
+ else if (minor_opcode == 0x10 || minor_opcode == 0x11)
+ return 8;
+ }
+ if (major_opcode == 0xa)
+ {
+ return 8;
}
+ /* Fall through. */
case bfd_mach_arc_arc600:
return (major_opcode > 0xb) ? 2 : 4;
break;
break;
default:
- abort ();
+ return 0;
}
}
is held in the array INSN. */
static int
-extract_operand_value (const struct arc_operand *operand, unsigned *insn)
+extract_operand_value (const struct arc_operand *operand,
+ unsigned long long insn,
+ unsigned limm)
{
int value;
if (operand->flags & ARC_OPERAND_LIMM)
/* The second part of the instruction value will have been loaded as
part of the find_format call made earlier. */
- value = insn[1];
+ value = limm;
else
{
if (operand->extract)
- value = (*operand->extract) (insn[0], (int *) NULL);
+ value = (*operand->extract) (insn, (int *) NULL);
else
{
if (operand->flags & ARC_OPERAND_ALIGNED32)
{
- value = (insn[0] >> operand->shift)
+ value = (insn >> operand->shift)
& ((1 << (operand->bits - 2)) - 1);
value = value << 2;
}
else
{
- value = (insn[0] >> operand->shift) & ((1 << operand->bits) - 1);
+ value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
}
if (operand->flags & ARC_OPERAND_SIGNED)
{
const struct arc_operand **operand,
int *value)
{
- if (iter->mode == OPERAND_ITERATOR_STANDARD)
+ if (*iter->opidx == 0)
{
- if (*iter->state.standard.opidx == 0)
- {
- *operand = NULL;
- return FALSE;
- }
-
- *operand = &arc_operands[*iter->state.standard.opidx];
- *value = extract_operand_value (*operand, iter->insn);
- iter->state.standard.opidx++;
+ *operand = NULL;
+ return FALSE;
}
- else
- {
- const struct arc_operand *operand_base, *operand_limm;
- int value_base, value_limm;
- if (*iter->state.long_insn.opidx_limm == 0)
- {
- *operand = NULL;
- return FALSE;
- }
-
- operand_base = &arc_operands[*iter->state.long_insn.opidx_base];
- operand_limm = &arc_operands[*iter->state.long_insn.opidx_limm];
+ *operand = &arc_operands[*iter->opidx];
+ *value = extract_operand_value (*operand, iter->insn, iter->limm);
+ iter->opidx++;
- if (operand_base->flags & ARC_OPERAND_LIMM)
- {
- /* We've reached the end of the operand list. */
- *operand = NULL;
- return FALSE;
- }
-
- value_base = value_limm = 0;
- if (!(operand_limm->flags & ARC_OPERAND_IGNORE))
- {
- /* This should never happen. If it does then the use of
- extract_operand_value below will access memory beyond
- the insn array. */
- assert ((operand_limm->flags & ARC_OPERAND_LIMM) == 0);
-
- *operand = operand_limm;
- value_limm = extract_operand_value (*operand, &iter->insn[1]);
- }
-
- if (!(operand_base->flags & ARC_OPERAND_IGNORE))
- {
- *operand = operand_base;
- value_base = extract_operand_value (*operand, iter->insn);
- }
-
- /* This is a bit of a fudge. There's no reason why simply ORing
- together the two values is the right thing to do, however, for all
- the cases we currently have, it is the right thing, so, for now,
- I've put off solving the more complex problem. */
- *value = value_base | value_limm;
-
- iter->state.long_insn.opidx_base++;
- iter->state.long_insn.opidx_limm++;
- }
return TRUE;
}
/* Helper for parsing the options. */
static void
-parse_option (char *option)
+parse_option (const char *option)
{
- if (CONST_STRNEQ (option, "dsp"))
+ if (disassembler_options_cmp (option, "dsp") == 0)
add_to_decodelist (DSP, NONE);
- else if (CONST_STRNEQ (option, "spfp"))
+ else if (disassembler_options_cmp (option, "spfp") == 0)
add_to_decodelist (FLOAT, SPX);
- else if (CONST_STRNEQ (option, "dpfp"))
+ else if (disassembler_options_cmp (option, "dpfp") == 0)
add_to_decodelist (FLOAT, DPX);
- else if (CONST_STRNEQ (option, "quarkse_em"))
- add_to_decodelist (FLOAT, QUARKSE);
+ else if (disassembler_options_cmp (option, "quarkse_em") == 0)
+ {
+ add_to_decodelist (FLOAT, DPX);
+ add_to_decodelist (FLOAT, SPX);
+ add_to_decodelist (FLOAT, QUARKSE1);
+ add_to_decodelist (FLOAT, QUARKSE2);
+ }
- else if (CONST_STRNEQ (option, "fpuda"))
+ else if (disassembler_options_cmp (option, "fpuda") == 0)
add_to_decodelist (FLOAT, DPA);
- else if (CONST_STRNEQ (option, "fpud"))
+ else if (disassembler_options_cmp (option, "nps400") == 0)
+ {
+ add_to_decodelist (ACL, NPS400);
+ add_to_decodelist (ARITH, NPS400);
+ add_to_decodelist (BITOP, NPS400);
+ add_to_decodelist (BMU, NPS400);
+ add_to_decodelist (CONTROL, NPS400);
+ add_to_decodelist (DMA, NPS400);
+ add_to_decodelist (DPI, NPS400);
+ add_to_decodelist (MEMORY, NPS400);
+ add_to_decodelist (MISC, NPS400);
+ add_to_decodelist (NET, NPS400);
+ add_to_decodelist (PMU, NPS400);
+ add_to_decodelist (PROTOCOL_DECODE, NPS400);
+ add_to_decodelist (ULTRAIP, NPS400);
+ }
+
+ else if (disassembler_options_cmp (option, "fpus") == 0)
{
add_to_decodelist (FLOAT, SP);
add_to_decodelist (FLOAT, CVT);
}
- else if (CONST_STRNEQ (option, "fpus"))
+ else if (disassembler_options_cmp (option, "fpud") == 0)
{
add_to_decodelist (FLOAT, DP);
add_to_decodelist (FLOAT, CVT);
}
+ else if (CONST_STRNEQ (option, "hex"))
+ print_hex = TRUE;
else
- fprintf (stderr, _("Unrecognised disassembler option: %s\n"), option);
+ /* xgettext:c-format */
+ opcodes_error_handler (_("unrecognised disassembler option: %s"), option);
+}
+
+#define ARC_CPU_TYPE_A6xx(NAME,EXTRA) \
+ { #NAME, ARC_OPCODE_ARC600, "ARC600" }
+#define ARC_CPU_TYPE_A7xx(NAME,EXTRA) \
+ { #NAME, ARC_OPCODE_ARC700, "ARC700" }
+#define ARC_CPU_TYPE_AV2EM(NAME,EXTRA) \
+ { #NAME, ARC_OPCODE_ARCv2EM, "ARC EM" }
+#define ARC_CPU_TYPE_AV2HS(NAME,EXTRA) \
+ { #NAME, ARC_OPCODE_ARCv2HS, "ARC HS" }
+#define ARC_CPU_TYPE_NONE \
+ { 0, 0, 0 }
+
+/* A table of CPU names and opcode sets. */
+static const struct cpu_type
+{
+ const char *name;
+ unsigned flags;
+ const char *isa;
+}
+ cpu_types[] =
+{
+ #include "elf/arc-cpu.def"
+};
+
+/* Helper for parsing the CPU options. Accept any of the ARC architectures
+ values. OPTION should be a value passed to cpu=. */
+
+static unsigned
+parse_cpu_option (const char *option)
+{
+ int i;
+
+ for (i = 0; cpu_types[i].name; ++i)
+ {
+ if (!disassembler_options_cmp (cpu_types[i].name, option))
+ {
+ return cpu_types[i].flags;
+ }
+ }
+
+ /* xgettext:c-format */
+ opcodes_error_handler (_("unrecognised disassembler CPU option: %s"), option);
+ return ARC_OPCODE_NONE;
}
/* Go over the options list and parse it. */
static void
-parse_disassembler_options (char *options)
+parse_disassembler_options (const char *options)
{
+ const char *option;
+
if (options == NULL)
return;
- while (*options)
+ /* Disassembler might be reused for difference CPU's, and cpu option set for
+ the first one shouldn't be applied to second (which might not have
+ explicit cpu in its options. Therefore it is required to reset enforced
+ CPU when new options are being parsed. */
+ enforced_isa_mask = ARC_OPCODE_NONE;
+
+ FOR_EACH_DISASSEMBLER_OPTION (option, options)
{
- /* Skip empty options. */
- if (*options == ',')
- {
- ++ options;
- continue;
- }
+ /* A CPU option? Cannot use STRING_COMMA_LEN because strncmp is also a
+ preprocessor macro. */
+ if (strncmp (option, "cpu=", 4) == 0)
+ /* Strip leading `cpu=`. */
+ enforced_isa_mask = parse_cpu_option (option + 4);
+ else
+ parse_option (option);
+ }
+}
- parse_option (options);
+/* Return the instruction type for an instruction described by OPCODE. */
- while (*options != ',' && *options != '\0')
- ++ options;
+static enum dis_insn_type
+arc_opcode_to_insn_type (const struct arc_opcode *opcode)
+{
+ enum dis_insn_type insn_type;
+
+ switch (opcode->insn_class)
+ {
+ case BRANCH:
+ case BBIT0:
+ case BBIT1:
+ case BI:
+ case BIH:
+ case BRCC:
+ case EI:
+ case JLI:
+ case JUMP:
+ case LOOP:
+ if (!strncmp (opcode->name, "bl", 2)
+ || !strncmp (opcode->name, "jl", 2))
+ {
+ if (opcode->subclass == COND)
+ insn_type = dis_condjsr;
+ else
+ insn_type = dis_jsr;
+ }
+ else
+ {
+ if (opcode->subclass == COND)
+ insn_type = dis_condbranch;
+ else
+ insn_type = dis_branch;
+ }
+ break;
+ case LOAD:
+ case STORE:
+ case MEMORY:
+ case ENTER:
+ case PUSH:
+ case POP:
+ insn_type = dis_dref;
+ break;
+ case LEAVE:
+ insn_type = dis_branch;
+ break;
+ default:
+ insn_type = dis_nonbranch;
+ break;
}
+
+ return insn_type;
}
/* Disassemble ARC instructions. */
print_insn_arc (bfd_vma memaddr,
struct disassemble_info *info)
{
- bfd_byte buffer[4];
- unsigned int lowbyte, highbyte;
+ bfd_byte buffer[8];
+ unsigned int highbyte, lowbyte;
int status;
unsigned int insn_len;
- unsigned insn[2] = { 0, 0 };
- unsigned isa_mask;
+ unsigned long long insn = 0;
+ unsigned isa_mask = ARC_OPCODE_NONE;
const struct arc_opcode *opcode;
bfd_boolean need_comma;
bfd_boolean open_braket;
int size;
const struct arc_operand *operand;
- int value;
+ int value, vpcl;
struct arc_operand_iterator iter;
- Elf_Internal_Ehdr *header = NULL;
+ struct arc_disassemble_info *arc_infop;
+ bfd_boolean rpcl = FALSE, rset = FALSE;
if (info->disassembler_options)
{
info->disassembler_options = NULL;
}
- memset (&iter, 0, sizeof (iter));
- lowbyte = ((info->endian == BFD_ENDIAN_LITTLE) ? 1 : 0);
- highbyte = ((info->endian == BFD_ENDIAN_LITTLE) ? 0 : 1);
+ if (info->private_data == NULL && !init_arc_disasm_info (info))
+ return -1;
- if (info->section && info->section->owner)
- header = elf_elfheader (info->section->owner);
+ memset (&iter, 0, sizeof (iter));
+ highbyte = ((info->endian == BFD_ENDIAN_LITTLE) ? 1 : 0);
+ lowbyte = ((info->endian == BFD_ENDIAN_LITTLE) ? 0 : 1);
- switch (info->mach)
+ /* Figure out CPU type, unless it was enforced via disassembler options. */
+ if (enforced_isa_mask == ARC_OPCODE_NONE)
{
- case bfd_mach_arc_arc700:
- isa_mask = ARC_OPCODE_ARC700;
- break;
+ Elf_Internal_Ehdr *header = NULL;
- case bfd_mach_arc_arc600:
- isa_mask = ARC_OPCODE_ARC600;
- break;
+ if (info->section && info->section->owner)
+ header = elf_elfheader (info->section->owner);
- case bfd_mach_arc_arcv2:
- default:
- isa_mask = ARC_OPCODE_ARCv2EM;
- if ((header->e_flags & EF_ARC_MACH_MSK) == EF_ARC_CPU_ARCV2HS)
+ switch (info->mach)
{
- isa_mask = ARC_OPCODE_ARCv2HS;
- /* FPU instructions are not extensions for HS. */
- add_to_decodelist (FLOAT, SP);
- add_to_decodelist (FLOAT, DP);
- add_to_decodelist (FLOAT, CVT);
+ case bfd_mach_arc_arc700:
+ isa_mask = ARC_OPCODE_ARC700;
+ break;
+
+ case bfd_mach_arc_arc600:
+ isa_mask = ARC_OPCODE_ARC600;
+ break;
+
+ case bfd_mach_arc_arcv2:
+ default:
+ isa_mask = ARC_OPCODE_ARCv2EM;
+ /* TODO: Perhaps remove definition of header since it is only used at
+ this location. */
+ if (header != NULL
+ && (header->e_flags & EF_ARC_MACH_MSK) == EF_ARC_CPU_ARCV2HS)
+ isa_mask = ARC_OPCODE_ARCv2HS;
+ break;
}
- break;
+ }
+ else
+ isa_mask = enforced_isa_mask;
+
+ if (isa_mask == ARC_OPCODE_ARCv2HS)
+ {
+ /* FPU instructions are not extensions for HS. */
+ add_to_decodelist (FLOAT, SP);
+ add_to_decodelist (FLOAT, DP);
+ add_to_decodelist (FLOAT, CVT);
}
/* This variable may be set by the instruction decoder. It suggests
the number of bytes objdump should display on a single line. If
the instruction decoder sets this, it should always set it to
the same value in order to get reasonable looking output. */
-
info->bytes_per_line = 8;
/* In the next lines, we set two info variables control the way
8 and bytes_per_chunk is 4, the output will look like this:
00: 00000000 00000000
with the chunks displayed according to "display_endian". */
-
if (info->section
&& !(info->section->flags & SEC_CODE))
{
/* Read the insn into a host word. */
status = (*info->read_memory_func) (memaddr, buffer, size, info);
+
if (status != 0)
{
(*info->memory_error_func) (status, memaddr, info);
(*info->fprintf_func) (info->stream, ".word\t0x%08lx", data);
break;
default:
- abort ();
+ return -1;
}
return size;
}
- insn_len = arc_insn_length (buffer[lowbyte], buffer[highbyte], info);
+ insn_len = arc_insn_length (buffer[highbyte], buffer[lowbyte], info);
pr_debug ("instruction length = %d bytes\n", insn_len);
+ if (insn_len == 0)
+ return -1;
+
+ arc_infop = info->private_data;
+ arc_infop->insn_len = insn_len;
switch (insn_len)
{
case 2:
- insn[0] = (buffer[lowbyte] << 8) | buffer[highbyte];
+ insn = (buffer[highbyte] << 8) | buffer[lowbyte];
break;
- default:
- /* An unknown instruction is treated as being length 4. This is
- possibly not the best solution, but matches the behaviour that was
- in place before the table based instruction length look-up was
- introduced. */
case 4:
- /* This is a long instruction: Read the remaning 2 bytes. */
- status = (*info->read_memory_func) (memaddr + 2, &buffer[2], 2, info);
- if (status != 0)
- {
- (*info->memory_error_func) (status, memaddr + 2, info);
- return -1;
- }
- insn[0] = ARRANGE_ENDIAN (info, buffer);
+ {
+ /* This is a long instruction: Read the remaning 2 bytes. */
+ status = (*info->read_memory_func) (memaddr + 2, &buffer[2], 2, info);
+ if (status != 0)
+ {
+ (*info->memory_error_func) (status, memaddr + 2, info);
+ return -1;
+ }
+ insn = (unsigned long long) ARRANGE_ENDIAN (info, buffer);
+ }
+ break;
+
+ case 6:
+ {
+ status = (*info->read_memory_func) (memaddr + 2, &buffer[2], 4, info);
+ if (status != 0)
+ {
+ (*info->memory_error_func) (status, memaddr + 2, info);
+ return -1;
+ }
+ insn = (unsigned long long) ARRANGE_ENDIAN (info, &buffer[2]);
+ insn |= ((unsigned long long) buffer[highbyte] << 40)
+ | ((unsigned long long) buffer[lowbyte] << 32);
+ }
break;
+
+ case 8:
+ {
+ status = (*info->read_memory_func) (memaddr + 2, &buffer[2], 6, info);
+ if (status != 0)
+ {
+ (*info->memory_error_func) (status, memaddr + 2, info);
+ return -1;
+ }
+ insn =
+ ((((unsigned long long) ARRANGE_ENDIAN (info, buffer)) << 32)
+ | ((unsigned long long) ARRANGE_ENDIAN (info, &buffer[4])));
+ }
+ break;
+
+ default:
+ /* There is no instruction whose length is not 2, 4, 6, or 8. */
+ return -1;
}
+ pr_debug ("instruction value = %llx\n", insn);
+
/* Set some defaults for the insn info. */
info->insn_info_valid = 1;
info->branch_delay_insns = 0;
- info->data_size = 0;
+ info->data_size = 4;
info->insn_type = dis_nonbranch;
info->target = 0;
info->target2 = 0;
if (!opcode)
{
- if (insn_len == 2)
- (*info->fprintf_func) (info->stream, ".long %#04x", insn[0]);
- else
- (*info->fprintf_func) (info->stream, ".long %#08x", insn[0]);
+ switch (insn_len)
+ {
+ case 2:
+ (*info->fprintf_func) (info->stream, ".shor\t%#04llx",
+ insn & 0xffff);
+ break;
+
+ case 4:
+ (*info->fprintf_func) (info->stream, ".word\t%#08llx",
+ insn & 0xffffffff);
+ break;
+
+ case 6:
+ (*info->fprintf_func) (info->stream, ".long\t%#08llx",
+ insn & 0xffffffff);
+ (*info->fprintf_func) (info->stream, ".long\t%#04llx",
+ (insn >> 32) & 0xffff);
+ break;
+
+ case 8:
+ (*info->fprintf_func) (info->stream, ".long\t%#08llx",
+ insn & 0xffffffff);
+ (*info->fprintf_func) (info->stream, ".long\t%#08llx",
+ insn >> 32);
+ break;
+
+ default:
+ return -1;
+ }
info->insn_type = dis_noninsn;
return insn_len;
(*info->fprintf_func) (info->stream, "%s", opcode->name);
/* Preselect the insn class. */
- switch (opcode->insn_class)
- {
- case BRANCH:
- case JUMP:
- if (!strncmp (opcode->name, "bl", 2)
- || !strncmp (opcode->name, "jl", 2))
- {
- if (opcode->subclass == COND)
- info->insn_type = dis_condjsr;
- else
- info->insn_type = dis_jsr;
- }
- else
- {
- if (opcode->subclass == COND)
- info->insn_type = dis_condbranch;
- else
- info->insn_type = dis_branch;
- }
- break;
- case MEMORY:
- info->insn_type = dis_dref; /* FIXME! DB indicates mov as memory! */
- break;
- default:
- info->insn_type = dis_nonbranch;
- break;
- }
+ info->insn_type = arc_opcode_to_insn_type (opcode);
- pr_debug ("%s: 0x%08x\n", opcode->name, opcode->opcode);
+ pr_debug ("%s: 0x%08llx\n", opcode->name, opcode->opcode);
- print_flags (opcode, insn, info);
+ print_flags (opcode, &insn, info);
if (opcode->operands[0] != 0)
(*info->fprintf_func) (info->stream, "\t");
need_comma = FALSE;
open_braket = FALSE;
+ arc_infop->operands_count = 0;
/* Now extract and print the operands. */
operand = NULL;
+ vpcl = 0;
while (operand_iterator_next (&iter, &operand, &value))
{
if (open_braket && (operand->flags & ARC_OPERAND_BRAKET))
}
/* Only take input from real operands. */
- if ((operand->flags & ARC_OPERAND_FAKE)
- && !(operand->flags & ARC_OPERAND_BRAKET))
+ if (ARC_OPERAND_IS_FAKE (operand))
continue;
if ((operand->flags & ARC_OPERAND_IGNORE)
&& (operand->flags & ARC_OPERAND_IR)
- && value == -1)
+ && value == -1)
continue;
+ if (operand->flags & ARC_OPERAND_COLON)
+ {
+ (*info->fprintf_func) (info->stream, ":");
+ continue;
+ }
+
if (need_comma)
(*info->fprintf_func) (info->stream, ",");
continue;
}
+ need_comma = TRUE;
+
+ if (operand->flags & ARC_OPERAND_PCREL)
+ {
+ rpcl = TRUE;
+ vpcl = value;
+ rset = TRUE;
+
+ info->target = (bfd_vma) (memaddr & ~3) + value;
+ }
+ else if (!(operand->flags & ARC_OPERAND_IR))
+ {
+ vpcl = value;
+ rset = TRUE;
+ }
+
/* Print the operand as directed by the flags. */
if (operand->flags & ARC_OPERAND_IR)
{
rname = regnames[value + 1];
(*info->fprintf_func) (info->stream, "%s", rname);
}
+ if (value == 63)
+ rpcl = TRUE;
+ else
+ rpcl = FALSE;
}
else if (operand->flags & ARC_OPERAND_LIMM)
{
const char *rname = get_auxreg (opcode, value, isa_mask);
+
if (rname && open_braket)
(*info->fprintf_func) (info->stream, "%s", rname);
else
info->target = (bfd_vma) value;
}
}
- else if (operand->flags & ARC_OPERAND_PCREL)
- {
- /* PCL relative. */
- if (info->flags & INSN_HAS_RELOC)
- memaddr = 0;
- (*info->print_address_func) ((memaddr & ~3) + value, info);
-
- info->target = (bfd_vma) (memaddr & ~3) + value;
- }
else if (operand->flags & ARC_OPERAND_SIGNED)
{
const char *rname = get_auxreg (opcode, value, isa_mask);
if (rname && open_braket)
(*info->fprintf_func) (info->stream, "%s", rname);
else
- (*info->fprintf_func) (info->stream, "%d", value);
+ {
+ if (print_hex)
+ (*info->fprintf_func) (info->stream, "%#x", value);
+ else
+ (*info->fprintf_func) (info->stream, "%d", value);
+ }
+ }
+ else if (operand->flags & ARC_OPERAND_ADDRTYPE)
+ {
+ const char *addrtype = get_addrtype (value);
+ (*info->fprintf_func) (info->stream, "%s", addrtype);
+ /* A colon follow an address type. */
+ need_comma = FALSE;
}
else
{
if (operand->flags & ARC_OPERAND_TRUNCATE
&& !(operand->flags & ARC_OPERAND_ALIGNED32)
&& !(operand->flags & ARC_OPERAND_ALIGNED16)
- && value > 0 && value <= 14)
- (*info->fprintf_func) (info->stream, "r13-%s",
- regnames[13 + value - 1]);
+ && value >= 0 && value <= 14)
+ {
+ /* Leave/Enter mnemonics. */
+ switch (value)
+ {
+ case 0:
+ need_comma = FALSE;
+ break;
+ case 1:
+ (*info->fprintf_func) (info->stream, "r13");
+ break;
+ default:
+ (*info->fprintf_func) (info->stream, "r13-%s",
+ regnames[13 + value - 1]);
+ break;
+ }
+ rpcl = FALSE;
+ rset = FALSE;
+ }
else
{
const char *rname = get_auxreg (opcode, value, isa_mask);
}
}
- need_comma = TRUE;
+ if (operand->flags & ARC_OPERAND_LIMM)
+ {
+ arc_infop->operands[arc_infop->operands_count].kind
+ = ARC_OPERAND_KIND_LIMM;
+ /* It is not important to have exactly the LIMM indicator
+ here. */
+ arc_infop->operands[arc_infop->operands_count].value = 63;
+ }
+ else
+ {
+ arc_infop->operands[arc_infop->operands_count].value = value;
+ arc_infop->operands[arc_infop->operands_count].kind
+ = (operand->flags & ARC_OPERAND_IR
+ ? ARC_OPERAND_KIND_REG
+ : ARC_OPERAND_KIND_SHIMM);
+ }
+ arc_infop->operands_count ++;
+ }
+
+ /* Pretty print extra info for pc-relative operands. */
+ if (rpcl && rset)
+ {
+ if (info->flags & INSN_HAS_RELOC)
+ /* If the instruction has a reloc associated with it, then the
+ offset field in the instruction will actually be the addend
+ for the reloc. (We are using REL type relocs). In such
+ cases, we can ignore the pc when computing addresses, since
+ the addend is not currently pc-relative. */
+ memaddr = 0;
+
+ (*info->fprintf_func) (info->stream, "\t;");
+ (*info->print_address_func) ((memaddr & ~3) + vpcl, info);
}
return insn_len;
disassembler_ftype
arc_get_disassembler (bfd *abfd)
{
- /* Read the extenssion insns and registers, if any. */
- build_ARC_extmap (abfd);
+ /* BFD my be absent, if opcodes is invoked from the debugger that
+ has connected to remote target and doesn't have an ELF file. */
+ if (abfd != NULL)
+ {
+ /* Read the extension insns and registers, if any. */
+ build_ARC_extmap (abfd);
#ifdef DEBUG
- dump_ARC_extmap ();
+ dump_ARC_extmap ();
#endif
+ }
return print_insn_arc;
}
-/* Disassemble ARC instructions. Used by debugger. */
-
-struct arcDisState
-arcAnalyzeInstr (bfd_vma memaddr,
- struct disassemble_info *info)
-{
- struct arcDisState ret;
- memset (&ret, 0, sizeof (struct arcDisState));
-
- ret.instructionLen = print_insn_arc (memaddr, info);
-
-#if 0
- ret.words[0] = insn[0];
- ret.words[1] = insn[1];
- ret._this = &ret;
- ret.coreRegName = _coreRegName;
- ret.auxRegName = _auxRegName;
- ret.condCodeName = _condCodeName;
- ret.instName = _instName;
-#endif
-
- return ret;
-}
-
void
print_arc_disassembler_options (FILE *stream)
{
+ int i;
+
fprintf (stream, _("\n\
The following ARC specific disassembler options are supported for use \n\
with -M switch (multiple options should be separated by commas):\n"));
+ /* cpu=... options. */
+ for (i = 0; cpu_types[i].name; ++i)
+ {
+ /* As of now all value CPU values are less than 16 characters. */
+ fprintf (stream, " cpu=%-16s\tEnforce %s ISA.\n",
+ cpu_types[i].name, cpu_types[i].isa);
+ }
+
fprintf (stream, _("\
dsp Recognize DSP instructions.\n"));
fprintf (stream, _("\
fpus Recognize single precision FPU instructions.\n"));
fprintf (stream, _("\
fpud Recognize double precision FPU instructions.\n"));
+ fprintf (stream, _("\
+ nps400 Recognize NPS400 instructions.\n"));
+ fprintf (stream, _("\
+ hex Use only hexadecimal number to print immediates.\n"));
}
+void arc_insn_decode (bfd_vma addr,
+ struct disassemble_info *info,
+ disassembler_ftype disasm_func,
+ struct arc_instruction *insn)
+{
+ const struct arc_opcode *opcode;
+ struct arc_disassemble_info *arc_infop;
+
+ /* Ensure that insn would be in the reset state. */
+ memset (insn, 0, sizeof (struct arc_instruction));
+
+ /* There was an error when disassembling, for example memory read error. */
+ if (disasm_func (addr, info) < 0)
+ {
+ insn->valid = FALSE;
+ return;
+ }
+
+ assert (info->private_data != NULL);
+ arc_infop = info->private_data;
+
+ insn->length = arc_infop->insn_len;;
+ insn->address = addr;
+
+ /* Quick exit if memory at this address is not an instruction. */
+ if (info->insn_type == dis_noninsn)
+ {
+ insn->valid = FALSE;
+ return;
+ }
+
+ insn->valid = TRUE;
+
+ opcode = (const struct arc_opcode *) arc_infop->opcode;
+ insn->insn_class = opcode->insn_class;
+ insn->limm_value = arc_infop->limm;
+ insn->limm_p = arc_infop->limm_p;
+
+ insn->is_control_flow = (info->insn_type == dis_branch
+ || info->insn_type == dis_condbranch
+ || info->insn_type == dis_jsr
+ || info->insn_type == dis_condjsr);
+
+ insn->has_delay_slot = info->branch_delay_insns;
+ insn->writeback_mode
+ = (enum arc_ldst_writeback_mode) arc_infop->writeback_mode;
+ insn->data_size_mode = info->data_size;
+ insn->condition_code = arc_infop->condition_code;
+ memcpy (insn->operands, arc_infop->operands,
+ sizeof (struct arc_insn_operand) * MAX_INSN_ARGS);
+ insn->operands_count = arc_infop->operands_count;
+}
/* Local variables:
eval: (c-set-style "gnu")