+2019-12-19 Tom Tromey <tromey@adacore.com>
+
+ PR build/24572:
+ * Makefile.in (install-strip): New target.
+
+2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ * MAINTAINERS: Add myself as PRU maintainer.
+ * configure: Regenerated.
+ * configure.tgt: Add PRU.
+
+2019-09-20 Alan Modra <amodra@gmail.com>
+
+ * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
+
+2019-09-18 Alan Modra <amodra@gmail.com>
+
+ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
+ * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
+ * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
+ * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
+ * rx/trace.c: Update throughout for bfd section macro changes.
+
+2019-06-13 Stafford Horne <shorne@gmail.com>
+
+ * or1k/cpu.c: Regenerate.
+ * or1k/cpu.h: Regenerate.
+ * or1k/decode.c: Regenerate.
+ * or1k/decode.h: Regenerate.
+ * or1k/model.c: Regenerate.
+ * or1k/sem-switch.c: Regenerate.
+ * or1k/sem.c: Regenerate.
+
+2019-02-28 Joel Brobecker <brobecker@adacore.com>
+
+ * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
+
+2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
+
+ * MAINTAINERS: Add Andrew Burgess as global maintainer.
+
+2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
+
+ * sim-base.h: Add 'extern C' if header is compiled with C++.
+
+2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * common/acinclude.m4 (enable-cgen-maint): Support passing path to
+ cgen source tree.
+ * cris/configure: Regenerate.
+ * frv/configure: Regenerate.
+ * iq2000/configure: Regenerate.
+ * lm32/configure: Regenerate.
+ * m32r/configure: Regenerate.
+ * or1k/configure: Regenerate.
+ * sh64/configure: Regenerate.
+
+2018-10-05 Stafford Horne <shorne@gmail.com>
+
+ * or1k/cpu.h: Regenerate.
+ * or1k/decode.c: Regenerate.
+ * or1k/decode.h: Regenerate.
+ * or1k/model.c: Regenerate.
+ * or1k/sem-switch.c: Regenerate.
+ * or1k/sem.c: Regenerate:
+
+2018-07-20 Maciej W. Rozycki <macro@mips.com>
+
+ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
+ ISA maintenance.
+
+2018-07-19 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
+
+2018-07-14 Stafford Horne <shorne@gmail.com>
+
+ * MAINTAINERS (or1k): Add myself as or1k maintainer.
+
+2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
+
+ * All configure.ac: Remove AC_PREREQ.
+ * All configure: Re-generate.
+
+2018-01-22 Maciej W. Rozycki <macro@mips.com>
+
+ * MAINTAINERS: Update my company e-mail address.
+
+2017-12-12 Stafford Horne <shorne@gmail.com>
+ Peter Gavin <pgavin@gmail.com>
+
+ * configure: Regenerated.
+ * or1k/aclocal.m4: Generated.
+ * or1k/config.in: Generated.
+ * or1k/configure: Generated.
+
+2017-12-12 Stafford Horne <shorne@gmail.com>
+ Peter Gavin <pgavin@gmail.com>
+
+ * or1k/arch.c: Generated.
+ * or1k/arch.h: Generated.
+ * or1k/cpu.c: Generated.
+ * or1k/cpu.h: Generated.
+ * or1k/cpuall.h: Generated.
+ * or1k/decode.c: Generated.
+ * or1k/decode.h: Generated.
+ * or1k/model.c: Generated.
+ * or1k/sem-switch.c: Generated.
+ * or1k/sem.c: Generated.
+
+2017-12-12 Stafford Horne <shorne@gmail.com>
+ Peter Gavin <pgavin@gmail.com>
+
+ * configure.tgt: Add or1k sim.
+ * or1k/README: New file.
+ * or1k/Makefile.in: New file.
+ * or1k/configure.ac: New file.
+ * or1k/mloop.in: New file.
+ * or1k/or1k-sim.h: New file.
+ * or1k/or1k.c: New file.
+ * or1k/sim-if.c: New file.
+ * or1k/sim-main.h: New file.
+ * or1k/traps.c: New file.
+
+2017-11-01 James Bowman <james.bowman@ftdichip.com>
+
+ * ft32/interp.c (step_once): Add ft32 shortcode decoder.
+
+2017-10-12 James Bowman <james.bowman@ftdichip.com>
+
+ * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
+
+2017-10-12 James Bowman <james.bowman@ftdichip.com>
+
+ * MAINTAINERS (ft32): Add myself.
+
+2017-10-03 Jim Wilson <wilson@tuliptree.org>
+
+ * MAINTAINERS (aarch64): Update my email address.
+
+2017-09-06 John Baldwin <jhb@FreeBSD.org>
+
+ * configure.ac: Honor existing CC_FOR_BUILD in environment.
+ * configure: Regenerate.
+
+2017-02-14 Jim Wilson <jim.wilson@linaro.org>
+
+ * MAINTAINTERS (aarch64): Add myself.
+
+2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
+
+ * MAINTAINERS (Maintainers for particular sims): Add myself as
+ a MIPS maintainer.
+
+2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
+
+ * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
+
+2016-01-09 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete sim_common check and the
+ AC_CONFIG_SUBDIRS(common) call.
+ * configure: Regenerate.
+ * configure.tgt (sim_common): Delete the variable.
+
+2016-01-09 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: Delete /common/cconfig.h entry.
+
+2016-01-05 Nick Clifton <nickc@redhat.com>
+
+ * MAINTAINERS: Add myself as AArch64 sim maintainer.
+
+2015-12-09 Tristan Gingold <gingold@adacore.com>
+
+ * aarch64/simulator.c: Remove syscall.h include.
+
+2015-12-26 Mike Frysinger <vapier@gentoo.org>
+
+ * README-HACKING: Delete mention of tconfig.h.
+
+2015-11-24 Nick Clifton <nickc@redhat.com>
+
+ * configure.tgt: Add aarch64 entry.
+ * configure: Regenerate.
+
+2015-06-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
+ * configure: Regenerate.
+
+2015-06-12 Mike Frysinger <vapier@gentoo.org>
+
+ * README-HACKING: Change configure.in to configure.ac.
+
+2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
+
+ * arm/configure: Regenerated.
+ * avr/configure: Likewise.
+ * bfin/configure: Likewise.
+ * common/configure: Likewise.
+ * cr16/configure: Likewise.
+ * cris/configure: Likewise.
+ * d10v/configure: Likewise.
+ * erc32/configure: Likewise.
+ * frv/configure: Likewise.
+ * ft32/configure: Likewise.
+ * h8300/configure: Likewise.
+ * igen/configure: Likewise.
+ * iq2000/configure: Likewise.
+ * lm32/configure: Likewise.
+ * m32c/configure: Likewise.
+ * m32r/configure: Likewise.
+ * m68hc11/configure: Likewise.
+ * mcore/configure: Likewise.
+ * microblaze/configure: Likewise.
+ * mips/configure: Likewise.
+ * mn10300/configure: Likewise.
+ * moxie/configure: Likewise.
+ * msp430/configure: Likewise.
+ * ppc/configure: Likewise.
+ * rl78/configure: Likewise.
+ * rx/configure: Likewise.
+ * sh/configure: Likewise.
+ * sh64/configure: Likewise.
+ * v850/configure: Likewise.
+
+2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
+ (BFD_LIB): Remove $(ZLIB).
+ (CONFIG_LIBS): Add $(ZLIB).
+ * ppc/Makefile.in (ZLIBINC): Removed.
+ (INCLUDES): Remove $(ZLIBINC).
+ (BFD_LIB): Remove $(ZLIB).
+
+2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ * arm/configure: Regenerated.
+ * avr/configure: Likewise.
+ * bfin/configure: Likewise.
+ * common/configure: Likewise.
+ * cr16/configure: Likewise.
+ * cris/configure: Likewise.
+ * d10v/configure: Likewise.
+ * erc32/configure: Likewise.
+ * frv/configure: Likewise.
+ * ft32/configure: Likewise.
+ * h8300/configure: Likewise.
+ * igen/configure: Likewise.
+ * iq2000/configure: Likewise.
+ * lm32/configure: Likewise.
+ * m32c/configure: Likewise.
+ * m32r/configure: Likewise.
+ * m68hc11/configure: Likewise.
+ * mcore/configure: Likewise.
+ * microblaze/configure: Likewise.
+ * mips/configure: Likewise.
+ * mn10300/configure: Likewise.
+ * moxie/configure: Likewise.
+ * msp430/configure: Likewise.
+ * ppc/configure: Likewise.
+ * rl78/configure: Likewise.
+ * rx/configure: Likewise.
+ * sh/configure: Likewise.
+ * sh64/configure: Likewise.
+ * v850/configure: Likewise.
+
+2015-03-29 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * configure.ac: Delete sim_testsuite check and config in testsuite.
+ * configure.tgt (sim_testsuite): Delete everywhere.
+
+2015-03-28 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
+
+2015-03-28 James Bowman <james.bowman@ftdichip.com>
+
+ * configure.tgt: Add FT32 entry.
+ * configure: Regenerate.
+
+2015-03-16 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: Delete tconfig.h.
+ * README-HACKING: Change tconfig.in to tconfig.h.
+
+2014-03-12 Nick Clifton <nickc@redhat.com>
+
+ * MAINTAINERS: Add myself as the maintainer for the MSP430.
+
+2014-03-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
+ * configure: Regenerate.
+
+2014-01-06 Tom Tromey <tromey@redhat.com>
+
+ * common/cgen-trace.c: Don't use old VA_* macros.
+ * common/sim-load.c (xprintf): Likewise.
+ * common/sim-trace.c (trace_printf, debug_printf): Likewise.
+
+2014-01-06 Tom Tromey <tromey@redhat.com>
+
+ * README-HACKING: Don't use PARAMS.
+ * arm/wrapper.c: Don't use PARAMS.
+ * bfin/sim-main.h: Don't use PARAMS.
+ * common/callback.c: Don't use PARAMS.
+ * common/cgen-trace.c: Don't use PARAMS.
+ * common/run-sim.h: Don't use PARAMS.
+ * common/run.c: Don't use PARAMS.
+ * common/sim-base.h: Don't use PARAMS.
+ * common/sim-load.c: Don't use PARAMS.
+ * common/sim-options.h: Don't use PARAMS.
+ * common/sim-trace.c: Don't use PARAMS.
+ * common/sim-trace.h: Don't use PARAMS.
+ * common/sim-utils.h: Don't use PARAMS.
+ * cr16/cr16_sim.h: Don't use PARAMS.
+ * cr16/gencode.c: Don't use PARAMS.
+ * cr16/interp.c: Don't use PARAMS.
+ * cr16/simops.c: Don't use PARAMS.
+ * d10v/d10v_sim.h: Don't use PARAMS.
+ * d10v/gencode.c: Don't use PARAMS.
+ * d10v/interp.c: Don't use PARAMS.
+ * d10v/simops.c: Don't use PARAMS.
+ * erc32/erc32.c: Don't use PARAMS.
+ * erc32/exec.c: Don't use PARAMS.
+ * erc32/float.c: Don't use PARAMS.
+ * erc32/func.c: Don't use PARAMS.
+ * erc32/sis.c: Don't use PARAMS.
+ * erc32/sis.h: Don't use PARAMS.
+ * mips/interp.c: Don't use PARAMS.
+ * mips/sim-main.h: Don't use PARAMS.
+ * sh/interp.c: Don't use PARAMS.
+ * v850/sim-main.h: Don't use PARAMS.
+ * v850/v850_sim.h: Don't use PARAMS.
+
+2013-11-07 Will Newton <will.newton@linaro.org>
+
+ PR gdb/15508
+ * arm/wrapper.c (sim_create_inferior): Call init before
+ accessing STATE.
+
+2013-11-07 Will Newton <will.newton@linaro.org>
+
+ PR gdb/8989
+ * arm/wrapper.c (sim_create_inferior): Avoid calling
+ bfd_get_mach with a NULL bfd.
+
+2013-06-21 Nick Clifton <nickc@redhat.com>
+
+ * msp430: New Directory.
+ * configure.tgt: Add it.
+ * configure: Regenerate.
+
+2013-03-15 Steve Ellcey <sellcey@mips.com>
+
+ * arm/wrapper.c (sim_complete_command): Make char arguments const.
+ * avr/interp.c (sim_complete_command): Ditto.
+ * common/sim-options.c (sim_complete_command): Ditto.
+ * cr16/interp.c (sim_complete_command): Ditto.
+ * erc32/interf.c (sim_complete_command): Ditto.
+ * m32c/gdb-if.c (sim_complete_command): Ditto.
+ * microblaze/interp.c (sim_complete_command): Ditto.
+ * ppc/sim_calls.c (sim_complete_command): Ditto.
+ * rl78/gdb-if.c (sim_complete_command): Ditto.
+ * rx/gdb-if.c (sim_complete_command): Ditto.
+ * sh/interp.c (sim_complete_command): Ditto.
+
+2013-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update year range in copyright notice of all files.
+
+2012-12-19 Joel Brobecker <brobecker@adacore.com>
+
+ Update old contact info in GPL license notices.
+
+2012-12-19 Joel Brobecker <brobecker@adacore.com>
+
+ Update the non-FSF-copyrighted files in sim to GPLv3 or later.
+
+2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
+
+ * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
+ condition.
+ * common/acinclude.m4: Define lt_cv_dlopen_libs.
+ * arm/configure: Regenerate.
+ * avr/configure: Regenerate.
+ * bfin/configure: Regenerate.
+ * common/configure: Regenerate.
+ * cr16/configure: Regenerate.
+ * cris/configure: Regenerate.
+ * d10v/configure: Regenerate.
+ * erc32/configure: Regenerate.
+ * frv/configure: Regenerate.
+ * h8300/configure: Regenerate.
+ * igen/configure: Regenerate.
+ * iq2000/configure: Regenerate.
+ * lm32/configure: Regenerate.
+ * m32c/configure: Regenerate.
+ * m32r/configure: Regenerate.
+ * m68hc11/configure: Regenerate.
+ * mcore/configure: Regenerate.
+ * microblaze/configure: Regenerate.
+ * mips/configure: Regenerate.
+ * mn10300/configure: Regenerate.
+ * moxie/configure: Regenerate.
+ * ppc/configure: Regenerate.
+ * rl78/configure: Regenerate.
+ * rx/configure: Regenerate.
+ * sh/configure: Regenerate.
+ * sh64/configure: Regenerate.
+ * testsuite/configure: Regenerate.
+ * v850/configure: Regenerate.
+
+2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
+
+ * MAINTAINERS: Update my email address.
+
+2012-09-24 Steve Ellcey <sellcey@mips.com>
+
+ * mips/basic.exp: Add mips*-mti-elf* target.
+ * configure.ac: Add mips*-mti-elf* target.
+ * configure: Regenerate.
+
+2012-06-15 Joel Brobecker <brobecker@adacore.com>
+
+ * configure: Regenerate.
+
+2012-06-06 Michael Eager <eager@eagercon.com>
+
+ * microblaze/interp.c (config.h): Add #include.
+
+2011-11-29 Joel Brobecker <brobecker@adacore.com>
+
+ * MAINTAINERS (Global Maintainers): New section. Add Mike
+ Frysinger.
+
+2011-11-28 DJ Delorie <dj@redhat.com>
+
+ * configure.tgt: Add rl78 support.
+ * configure: Regenerate.
+ * rl78: New directory.
+ * MAINTAINERS: Add myself as RL78 maintainer.
+
+2011-07-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * MAINTAINERS: Remove Thiemo Seufer.
+
+2011-06-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
+ * configure: Regenerate.
+
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
+ handle targets.
+ * configure: Regenerate.
+
+2011-03-05 Mike Frysinger <vapier@gentoo.org>
+
+ * MAINTAINERS: Add bfin entry.
+ * configure.tgt (bfin-*-*): Handle bfin targets.
+ * configure: Regenerate.
+
+2011-01-05 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: Add /*/hw-config.h.
+
+2010-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: New file.
+
+2010-07-28 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Add self as RX maintainer. Sort list.
+
+2010-06-08 Nick Clifton <nickc@redhat.com>
+
+ * reg.c (set_oszc): Use unsigned int for the mask.
+ (set_szc, set_osz, set_sz): Likewise.
+
+2010-04-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Target logic moved out to and included from ...
+ * configure.tgt: ... this new file.
+ * configure: Regenerated.
+
+2010-04-12 Mike Frysinger <vapier@gentoo.org>
+
+ * README-HACKING: Add more sections.
+
+2010-02-11 Doug Evans <dje@sebabeach.org>
+
+ * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
+ * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
+ * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * avr/configure: Regenerate.
+ * cris/configure: Regenerate.
+ * microblaze/configure: Regenerate.
+
+2010-01-02 Doug Evans <dje@sebabeach.org>
+
+ * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
+ * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
+ * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
+ * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
+ * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
+ * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
+
+2010-01-01 Doug Evans <dje@sebabeach.org>
+
+ * cris/mloop.in: Fix copyright year update snafu.
+
+2009-11-24 Joel Brobecker <brobecker@adacore.com>
+
+ * common/aclocal.m4: Add include of ../../config/zlib.m4.
+ * common/common.m4: Use AM_ZLIB to check for zlib support.
+ * ppc/configure.ac: Likewise.
+ * arm/configure, avr/configure, common/configure, cr16/configure,
+ cris/configure, d10v/configure, erc32/configure, frv/configure,
+ h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
+ m32r/configure, m68hc11/configure, mcore/configure,
+ microblaze/configure, mips/configure, mn10300/configure,
+ moxie/configure, ppc/configure, sh/configure, sh64/configure,
+ v850/configure: Regenerate.
+
+2009-11-24 DJ Delorie <dj@redhat.com>
+
+ * rx: New directory.
+ * configure.ac: Add entry for Renesas RX.
+ * configure: Regenerate.
+
+2009-11-22 Doug Evans <dje@sebabeach.org>
+
+ * cris/cpuall.h: Regenerate.
+ * cris/cpuv10.h: Regenerate.
+ * cris/cpuv32.h: Regenerate.
+ * cris/decodev10.c: Regenerate.
+ * cris/decodev10.h: Regenerate.
+ * cris/decodev32.c: Regenerate.
+ * cris/decodev32.h: Regenerate.
+
+2009-11-12 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_write): Allow byte access.
+ (sim_read): Ditto.
+
+2009-11-12 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_load): Clear memory before loading.
+
+2009-11-09 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_resume): Fix typo for OP_ret.
+
+2009-10-23 Doug Evans <dje@sebabeach.org>
+
+ * cris/arch.c: Regenerate.
+ * cris/arch.h: Regenerate.
+ * cris/cpuall.h: Regenerate.
+ * cris/cpuv10.c: Regenerate.
+ * cris/cpuv10.h: Regenerate.
+ * cris/cpuv32.c: Regenerate.
+ * cris/cpuv32.h: Regenerate.
+ * cris/cris-desc.c: Regenerate.
+ * cris/cris-desc.h: Regenerate.
+ * cris/cris-opc.h: Regenerate.
+ * cris/decodev10.c: Regenerate.
+ * cris/decodev10.h: Regenerate.
+ * cris/decodev32.c: Regenerate.
+ * cris/decodev32.h: Regenerate.
+ * cris/modelv10.c: Regenerate.
+ * cris/modelv32.c: Regenerate.
+ * cris/semcrisv10f-switch.c: Regenerate.
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2009-10-22 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_stop): Return 1.
+
+2009-10-16 Doug Evans <dje@sebabeach.org>
+
+ * MAINTAINERS: Add myself as m32r maintainer.
+
+2009-10-15 Michael Egaer <eager@eagercon.com>
+
+ * MAINTAINERS: Add self as MicroBlaze maintainer.
+
+2009-10-14 Ben Elliston <bje@gnu.org>
+
+ * MAINTAINERS (common): Move myself to "past maintainers" section.
+
+2009-10-06 Michael Eager <eager@eagercon.com>
+
+ * microblaze/interp.c: Add include microblaze-dis.h.
+
+2009-09-23 Michael Eager <eager@eagercon.com>
+
+ * configure: Add microblaze-*.* (not regenerated).
+ * configure.ac: Likewise.
+ * microblaze/config.in: New.
+ * microblaze/configure: Generate.
+ * microblaze/configure.ac: New.
+ * microblaze/interp.c: New.
+ * microblaze/Makefile.in: New.
+ * microblaze/microblaze.h: New.
+ * microblaze/microblaze.isa: New.
+ * microblaze/sim-main.h: New.
+ * microblaze/sysdep.h: New.
+
+2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * avr/config.in: Regenerate.
+ * avr/configure: Likewise.
+ * configure: Likewise.
+ * cris/config.in: Likewise.
+ * cris/configure: Likewise.
+
+ * configure.ac: m4_include toplevel config/override.m4.
+ * configure: Regenerate.
+ * avr/configure: Regenerate.
+ * cris/configure: Regenerate.
+
+2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * Makefile.in (datarootdir): New variable.
+
+2009-05-18 Jon Beniston <jon@beniston.com>
+
+ * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
+ * configure.ac: Add lm32 target.
+ * lm32: New directory.
+
+2009-05-11 Andrew Cagney <cagney@gnu.org>
+
+ * MAINTAINERS: Orphan ppc.
+
+2009-05-08 Kevin Buettner <kevinb@redhat.com>
+
+ * m32c/gdb-if.c (m32c_signal_to_host): Rename to
+ m32c_signal_to_target. Change signal return values from SIGILL,
+ SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
+ TARGET_SIGNAL_SEGV, etc. Fix all callers.
+
+2009-04-30 Anthony Green <green@moxielogic.com>
+
+ * MAINTAINERS: Add myself for the moxie port.
+ * moxie: New directory.
+ * configure.ac: Add entry for moxie.
+ * configure: Regenerate.
+
+2009-04-27 Tristan Gingold <gingold@adacore.com>
+
+ * avr: New directory.
+ * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
+ * avr/config.in: New file, generated by autoheader.
+ * avr/configure: New file generated by autoconf.
+ * configure.ac: Add avr.
+ * configure: Regenerated.
+
+2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
+
+ * Makefile.in: Add dummy install-pdf, html, and
+ install-html targets.
+
+2009-01-18 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c: Include errno.h.
+ (cris_start_address, cris_program_offset): New variables.
+ (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
+ enums.
+ (cris_options): New options --cris-program-offset and
+ --cris-start-address.
+ (cris_option_handler): Handle new options.
+ (cris_program_offset_write, cris_set_section_offset_iterator)
+ (cris_offset_sections, cris_offset_sections): New functions.
+ (sim_load): Use cris_program_offset_write as function argument to
+ cris_load_elf_file, not sim_write.
+ (struct offsetinfo): New struct.
+ (cris_handle_interpreter): Fix typo in comment.
+ (sim_open): Call cris_offset_sections as soon as the bfd of the
+ infile is available. Gate bfd validity checks on abfd non-NULL.
+ (sim_create_inferior): Let cris_start_address when != -1 override
+ other start-address choices.
+
+2009-01-06 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (abort): Define to call sim_io_error.
+ (create_map): Make -1 imply a non-fixed address, not 0. All
+ callers changed. Only prefer the next higher unmapped address if
+ the last mapped address is no less than 0x40000000. Check that
+ the address to be mapped is not already mapped. Update head
+ comment.
+ (unmap_pages): Don't call abort when recursive call fails, just
+ note and return an error if a page in the range couldn't be unmapped.
+ (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
+ (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
+ non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
+ don't abort on page not being mapped. Handle non-anon filemap
+ with length padded to pagesize.
+
+2009-01-03 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
+ (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
+ (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
+ (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
+ (TARGET_AT_CLKTCK): Remove redundant macros.
+ (AUX_ENT): Adjust to use standard ELF AT_* macros.
+ (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
+ callers.
+ (sim_open): Also pass AT_SECURE.
+
+ * cris/sim-main.h (struct _sim_cpu): New member
+ set_target_thread_data.
+ * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
+ * cris/crisv10f.c: Ditto.
+ * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
+ (MY (f_specific_init)): Set new _sim_cpu member to new function.
+ * cris/traps.c (TARGET_SYS_set_thread_area): Define.
+ (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
+ case.
+
+ * cris/traps.c (TARGET_SYS_exit_group): Define.
+ (cris_break_13_handler): Handle it like the exit for the last
+ thread.
+
+ * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
+ (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
+ (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
+ 2.6.27. Set machine field to the BFD printable name of the
+ machine.
+
+ * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
+ TARGET_MAP_DENYWRITE.
+
+ * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
+ (TARGET_X_OK, TARGET_F_OK): Define.
+ (cris_break_13_handler) <case TARGET_SYS_access>: New case.
+
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2008-12-30 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
+ just a short CRIS-specific notice. Tweak the wording for a
+ failing architecture test.
+
+ * cris/traps.c (TARGET_SYS_writev): New macro.
+ (is_mapped_only, cris_dump_map): New functions.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
+ and prot combinations and a non-zero page-offset. If
+ TARGET_MAP_FIXED, unmap pages before mapping them.
+ <case TARGET_SYS_mprotect>: When checking, allow any length
+ argument. Don't actually do anything.
+ <case TARGET_SYS_writev>: New case.
+
+ * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
+ * cris/sim-if.c: Include elf-bfd.h.
+ (struct progbounds): New members end_loadmem, start_nonloadmem.
+ (xprintf, eprintf): New functions, copied from common/sim-load.c.
+ (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
+ (get_progbounds_iterator): Renamed from get_progbounds. Make
+ static. Update head comment. Set new struct progbounds members.
+ (exec_load_addr, interp_load_addr, interp_start_addr): New static
+ variables.
+ (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
+ (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
+ functions.
+ (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
+ handling to use auxv_entries. Improve error message and checking
+ for invalid programs. Use new variable abfd for the program
+ instead of for each access reaching into sd to get it.
+ (sim_create_inferior): If non-zero, use interp_start_addr instead
+ of the program start address.
+ (cris_disassemble_insn): Remove incorrect and unclear, supposedly
+ stale comment. Always specify little-endian.
+
+2008-07-29 Nick Clifton <nickc@redhat.com>
+
+ * common/genmloop.sh: Add new parameter: -shell to specify the
+ command interpreter to use to run the input file. This is
+ necessary because otherwise SHELL is taken from the user's
+ environment, and not from the makefile that invoked this script
+ and the user might not be running an sh-like shell.
+ * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
+ * fr30/Makefile.in: Likewise.
+ * frv/Makefile.in: Likewise.
+ * i960/Makefile.in: Likewise.
+ * iq2000/Makefile.in: Likewise.
+ * m32r/Makefile.in: Likewise.
+
+ * frv/mloop.in: Add missing start of line comment marker.
+
+2008-07-11 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/configure: Regenerate to track ../common/common.m4 changes.
+ * cris/config.in: Ditto.
+
+2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+ Joseph Myers <joseph@codesourcery.com>
+
+ * cris/configure: Regenerate.
+
+2008-05-09 Olivier Hainque <hainque@adacore.com>
+
+ * ppc/altivec.igen (vperm): Latch inputs into temporaries.
+
+2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+ * MAINTAINERS: Add myself as maintainer of cr16 port.
+
+2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+ Add simulator for National cr16 processor.
+ * cr16: New directory.
+ * configure.ac: Add entry for National cr16.
+ * configure: Regenerate.
+
+2008-02-05 DJ Delorie <dj@redhat.com>
+
+ * configure.ac (v850): V850 now has a testsuite.
+ * configure (v850): Likewise.
+
+2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
+
+ Updated copyright notices for most files.
+
+2007-12-19 DJ Delorie <dj@redhat.com>
+
+ * frv/frv.c (frvbf_cut): Only look at the six LSBs of
+ cut_point.
+
+2007-10-22 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
+ cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
+ cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
+ cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
+ cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
+ cris/semcrisv32f-switch.c: Regenerate.
+
+2007-08-24 Joel Brobecker <brobecker@adacore.com>
+
+ Switch the license of all files explicitly copyright the FSF
+ to GPLv3.
+
+2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
+
+ * Makefile.in: Add dummy "pdf" target.
+
+2007-02-20 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (dump_statistics): Change format for cycle numbers
+ to %llu and cast parameters to unsigned long long.
+
+2007-02-16 Thiemo Seufer <ths@mips.com>
+
+ * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
+
+2007-01-28 Manuel Lauss <slauss@resi.at>
+
+ * configure.ac (sh64-*-*): Change to sh64*-*-*.
+ (sh-*-*): Change to sh*-*-*.
+ * configure: Regenerated.
+
+2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
+
+ Updated copyright notices for most files.
+
2006-12-20 Hans-Peter Nilsson <hp@axis.com>
+ * Makefile.in (autoconf-common autoheader-common): Only run
+ autoheader on subdirs with a file config.in.
+
+ * configure.ac (common): Make the default "yes" for all targets
+ with sim subdirs.
+ * configure: Regenerate.
+
* Makefile.in (autoconf-common autoheader-common): In documented
usage, say SHELL=/bin/sh.
(.PHONY): Add autoheader-common.
* cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
- implemented. In call to create_map, pad length argument to 8k.
+ implemented. In call to create_map, pad length argument to 8k.
2005-04-15 Corinna Vinschen <vinschen@redhat.com>
* configure.ac: For mips*-*-* and mn10300*-*-* configure the
common directory. Remove sparc*-*-* from list.
-
+
2005-01-11 Andrew Cagney <cagney@gnu.org>
* Makefile.in (autoconf-common autoheader-common): Add --force to
* MAINTAINERS: Add myself as maintainer of the FRV port.
2003-08-20 Michael Snyder <msnyder@redhat.com>
- Dave Brolley <brolley@redhat.com>
+ Dave Brolley <brolley@redhat.com>
* frv/: New directory, simulator for the Fujitsu FRV.
* configure.in: Add frv configury.
* configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
* configure: Re-generate.
-
+
2002-06-16 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (autoconf-changelog autoheader-changelog): Let name,
2000-04-20 Nick Clifton <nickc@cygnus.com>
* configure.in (extra_subdirs): Add testsuite to strongarm
- directories.
+ directories.
* configure: Regenerate.
Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (extra_subdirs): Add IGEN directory when MIPS
target.
* configure: Regenerate.
-
+
Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (extra_subdirs): v850ea needs igen.
* configure: Re-generate.
-
+
Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (testdir): When a testsuite directory, add that to
* configure.in (w65-*-*, only_if_enabled): Set.
* configure: Re-generate.
-
+
Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (sparc*-*-*, only_if_enabled): Set
only_if_enabled=yes. Check only_if_enabled before enabling a
simulator.
* configure: Regenerate.
-
+
Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
* configure.in (extra_subdirs): Add v850e target.
* configure.in (extra_subdirs): Include testsuite for d30v.
* configure: Regenerate.
-
+
* Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
../gdb/Makefile.in
(check): New rules - drive the testsuite.
* configure.in (d30v): New target.
* configure: Regenerated.
-
+
Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
* configure.in: Don't require GCC to build the mn10200