+2019-03-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * cpustate.c: Add 'libiberty.h' include.
+ * interp.c: Add 'sim-assert.h' include.
+
+2017-09-06 John Baldwin <jhb@FreeBSD.org>
+
+ * configure: Regenerate.
+
+2017-04-22 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (vec_load): Add M argument. Rewrite to iterate over
+ registers based on structure size.
+ (LD4, LD3, LD2, LD1_2, LD1_3, LD1_4): Pass new arg to vec_load.
+ (LD1_1): Replace with call to vec_load.
+ (vec_store): Add new M argument. Rewrite to iterate over registers
+ based on structure size.
+ (ST4, ST3, ST2, ST1_2, ST1_3, ST1_4): Pass new arg to vec_store.
+ (ST1_1): Replace with call to vec_store.
+
+2017-04-08 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_FCVTL): New.
+ (do_vec_op1): Call do_vec_FCVTL.
+
+ * simulator.c (do_scalar_FCMGE_zero, do_scalar_FCMLE_zero,
+ do_scalar_FCMGT_zero, do_scalar_FCMEQ_zero, do_scalar_FCMLT_zero): New.
+ (do_scalar_vec): Add calls to new functions.
+
+2017-03-25 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (set_flags_for_add32): Cast result to uint32_t in carry
+ flag check.
+
+2017-03-03 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (mul64hi): Shift carry left by 32.
+ (smulh): Change signum to negate. If negate, invert result, and add
+ carry bit if low part of multiply result is zero.
+
+2017-02-25 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_SMOV_into_scalar): New.
+ (do_vec_UMOV_into_scalar): Renamed from do_vec_MOV_into_scalar.
+ Rewritten.
+ (do_vec_UMOV): Merged into do_vec_UMOV_into_scalar and deleted.
+ (do_vec_op1): Move do_vec_TRN call and do_vec_UZP call. Add
+ do_vec_SMOV_into_scalar call. Delete do_vec_MOV_into_scalar and
+ do_vec_UMOV calls. Add do_vec_UMOV_into_scalar call.
+
+ * simulator.c (popcount): New.
+ (do_vec_CNT): New.
+ (do_vec_op1): Add do_vec_CNT call.
+
+2017-02-19 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_ADDV): Mov val declaration inside each case,
+ with type set to input type size.
+ (do_vec_xtl): Change bias from 3 to 4 for byte case.
+
+2017-02-14 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_MLA): Rewrite switch body.
+
+ * simulator.c (do_vec_bit): Change loop limits from 16 and 8 to 4 and
+ 2. Move test_false if inside loop. Fix logic for computing result
+ stored to vd.
+
+ * simulator.c: (LDn_STn_SINGLE_LANE_AND_SIZE): New.
+ (do_vec_LDn_single, do_vec_STn_single): New.
+ (do_vec_LDnR): Add and set new nregs var. Replace switch on nregs with
+ loop over nregs using new var n. Add n times size to address in loop.
+ Add n to vd in loop.
+ (do_vec_load_store): Add comment for instruction bit 24. New var
+ single to hold instruction bit 24. Add new code to use single. Move
+ ldnr support inside single if statements. Fix ldnr register counts
+ inside post if statement. Change HALT_NYI calls to HALT_UNALLOC.
+
+2017-01-23 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_compare): Add case 0x23 for CMTST.
+
+2017-01-17 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_ADDV): Call aarch64_set_vec_u64 instead of
+ aarch64_set_reg_u64. In case 2, call HALT_UNALLOC if not full. In
+ case 3, call HALT_UNALLOC unconditionally.
+ (do_vec_XTN): Delete shifts. In case 2, change index from i + 4 to
+ i + 2. Delete if on bias, change index to i + bias * X.
+
+2017-01-09 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (do_vec_UZP): Rewrite.
+
+2017-01-04 Jim Wilson <jim.wilson@linaro.org>
+
+ * cpustate.c: Include math.h.
+ (aarch64_set_FP_float): Use signbit to check for signed zero.
+ (aarch64_set_FP_double): Likewise.
+ * simulator.c (do_vec_MOV_immediate, case 0x8): Add missing break.
+ (do_vec_mul): In all DO_VEC_WIDENING_MUL calls, make second and fourth
+ args same size as third arg.
+ (fmaxnm): Use isnan instead of fpclassify.
+ (fminnm, dmaxnm, dminnm): Likewise.
+ (do_vec_MLS): Reverse order of subtraction operands.
+ (dexSimpleFPCondSelect): Call aarch64_get_FP_double or
+ aarch64_get_FP_float to get source register contents.
+ (UINT_MIN, ULONG_MIN, FLOAT_UINT_MAX, FLOAT_UINT_MIN,
+ DOUBLE_UINT_MAX, DOUBLE_UINT_MIN, FLOAT_ULONG_MAX, FLOAT_ULONG_MIN,
+ DOUBLE_ULONG_MAX, DOUBLE_ULONG_MIN): New.
+ (do_fcvtzu): Use ULONG instead of LONG, and UINT instead of INT in
+ raise_exception calls.
+
+2016-12-21 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (set_flags_for_float_compare): Add code to handle Inf.
+ Add comment to document NaN issue.
+ (set_flags_for_double_compare): Likewise.
+
+2016-12-13 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (NEG, POS): Move before set_flags_for_add64.
+ (set_flags_for_add64): Replace with a modified copy of
+ set_flags_for_sub64.
+
+2016-12-03 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (tbnz, tbz): Cast 1 to uint64_t before shifting.
+ (dexTestBranchImmediate): Shift high bit of pos by 5 not 4.
+
+2016-12-01 Jim Wilson <jim.wilson@linaro.org>
+
+ * simulator.c (fsturs): Switch use of rn and st variables.
+ (fsturd, fsturq): Likewise
+
+2016-08-15 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c: Include bfd.h.
+ (symcount, symtab, aarch64_get_sym_value): Delete.
+ (remove_useless_symbols): Change count type to long.
+ (aarch64_get_func): Add SIM_DESC to arg list. Add symcount
+ and symtab local variables.
+ (sim_create_inferior): Delete storage. Replace symbol code
+ with a call to trace_load_symbols.
+ * memory.c: Delete bfd.h, elf/internal.h, and elf/common.h
+ includes.
+ (aarch64_get_heap_start): Change aarch64_get_sym_value to
+ trace_sym_value.
+ * memory.h: Delete bfd.h include.
+ (mem_add_blk): Delete unused prototype.
+ * simulator.c (bl, blr): Pass SIM_DESC to aarch64_get_func.
+ * simulator.c (aarch64_get_func): Add SIM_DESC to arg list.
+ (aarch64_get_sym_value): Delete.
+
+2016-08-12 Nick Clifton <nickc@redhat.com>
+
+ * simulator.c (aarch64_step): Revert pervious delta.
+ (aarch64_run): Call sim_events_tick after each
+ instruction is simulated, and if necessary call
+ sim_events_process.
+ * simulator.h: Revert previous delta.
+
+2016-08-11 Nick Clifton <nickc@redhat.com>
+
+ * interp.c (sim_create_inferior): Allow for being called with a
+ NULL abfd parameter. If a bfd is provided, initialise the sim
+ with that start address.
+ * simulator.c (HALT_NYI): Just print out the numeric value of the
+ instruction when not tracing.
+ (aarch64_step): Change from static to global.
+ * simulator.h: Add a prototype for aarch64_step().
+
+2016-07-27 Alan Modra <amodra@gmail.com>
+
+ * memory.c: Don't include libbfd.h.
+
+2016-07-21 Nick Clifton <nickc@redhat.com>
+
+ * simulator.c (fsqrts): Use sqrtf rather than sqrt.
+
+2016-06-30 Jim Wilson <jim.wilson@linaro.org>
+
+ * cpustate.h: Include config.h.
+ (union GRegisterValue): Add WORDS_BIGENDIAN check. For big endian code
+ use anonymous structs to align members.
+ * simulator.c (aarch64_step): Use sim_core_read_buffer and
+ endian_le2h_4 to read instruction from pc.
+
2016-05-06 Nick Clifton <nickc@redhat.com>
* simulator.c (do_FMLA_by_element): New function.
projects / deliverable / binutils-gdb.git / blobdiff