AC_DEFUN(SIM_AC_COMMON,
[
# autoconf.info says this should be called right after AC_INIT.
-AC_CONFIG_HEADER(config.h:config.in)
+AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
AC_CANONICAL_SYSTEM
AC_SUBST(AR)
AC_PROG_RANLIB
+dnl We don't use gettext, but bfd does. So we do the appropriate checks
+dnl to see if there are intl libraries we should link against.
+ALL_LINGUAS=
+CY_GNU_GETTEXT
+
# Check for common headers.
# FIXME: Seems to me this can cause problems for i386-windows hosts.
# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h)
-AC_CHECK_FUNCS(getrusage time)
+AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)
+AC_CHECK_HEADERS(sys/time.h sys/resource.h)
+AC_CHECK_HEADERS(fcntl.h fpu_control.h)
+AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)
+AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
+
+# Check for socket libraries
+AC_CHECK_LIB(socket, bind)
+AC_CHECK_LIB(nsl, gethostbyname)
. ${srcdir}/../../bfd/configure.host
dnl all shall eventually behave the same way.
+dnl We don't use automake, but we still want to support
+dnl --enable-maintainer-mode.
+USE_MAINTAINER_MODE=no
+AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode Enable developer functionality.],
+[case "${enableval}" in
+ yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
+ no) MAINT="#" ;;
+ *) AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;;
+esac
+if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
+ echo "Setting maintainer mode" 6>&1
+fi],[MAINT="#"])dnl
+AC_SUBST(MAINT)
+
+
dnl This is a generic option to enable special byte swapping
dnl insns on *any* cpu.
AC_ARG_ENABLE(sim-bswap,
AC_ARG_ENABLE(sim-cflags,
[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
[case "${enableval}" in
- yes) sim_cflags="-O2";;
+ yes) sim_cflags="-O2 -fomit-frame-pointer";;
trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;
no) sim_cflags="";;
*) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
echo "Setting sim profile = $sim_profile" 6>&1
-fi],[sim_profile=""])dnl
+fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl
AC_SUBST(sim_profile)
dnl Types used by common code
AC_TYPE_SIGNAL
+dnl Detect exe extension
+AC_EXEEXT
dnl These are available to append to as desired.
sim_link_files=
dnl and SIM_AC_OUTPUT lines.
+dnl Specify the running environment.
+dnl If the simulator invokes this in its configure.in then without this option
+dnl the default is the user environment and all are runtime selectable.
+dnl If the simulator doesn't invoke this, only the user environment is
+dnl supported.
+dnl ??? Until there is demonstrable value in doing something more complicated,
+dnl let's not.
+AC_DEFUN(SIM_AC_OPTION_ENVIRONMENT,
+[
+AC_ARG_ENABLE(sim-environment,
+[ --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.],
+[case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-environment");
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi],
+[sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"])dnl
+])
+AC_SUBST(sim_environment)
+
+
dnl Specify the alignment restrictions of the target architecture.
-dnl Without this option all possible alignment restrictions are accomidated.
+dnl Without this option all possible alignment restrictions are accommodated.
+dnl arg[1] is hardwired target alignment
+dnl arg[2] is default target alignment
AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
+wire_alignment="[$1]"
+default_alignment="[$2]"
[
AC_ARG_ENABLE(sim-alignment,
-[ --enable-sim-alignment=align Specify strict or nonstrict alignment.],
+[ --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses.],
[case "${enableval}" in
- yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
- no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
- 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
+ strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+ nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+ forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+ yes) if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
+ else
+ echo "No hard-wired alignment for target $target" 1>&6
+ sim_alignment="-DWITH_ALIGNMENT=0"
+ fi
+ fi;;
+ no) if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+ else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
+ else
+ echo "No default alignment for target $target" 1>&6
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+ fi
+ fi;;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
echo "Setting alignment flags = $sim_alignment" 6>&1
-fi],[sim_alignment=""])dnl
-AC_SUBST(sim_alignment)
+fi],
+[if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ sim_alignment=
+ fi
+fi])dnl
])dnl
+AC_SUBST(sim_alignment)
dnl Conditionally compile in assertion statements.
if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
echo "Setting assert flags = $sim_assert" 6>&1
fi],[sim_assert=""])dnl
+])
AC_SUBST(sim_assert)
+
+
+
+dnl --enable-sim-bitsize is for developers of the simulator
+dnl It specifies the number of BITS in the target.
+dnl arg[1] is the number of bits in a word
+dnl arg[2] is the number assigned to the most significant bit
+dnl arg[3] is the number of bits in an address
+dnl arg[4] is the number of bits in an OpenFirmware cell.
+dnl FIXME: this information should be obtained from bfd/archure
+AC_DEFUN(SIM_AC_OPTION_BITSIZE,
+wire_word_bitsize="[$1]"
+wire_word_msb="[$2]"
+wire_address_bitsize="[$3]"
+wire_cell_bitsize="[$4]"
+[AC_ARG_ENABLE(sim-bitsize,
+[ --enable-sim-bitsize=N Specify target bitsize (32 or 64).],
+[sim_bitsize=
+case "${enableval}" in
+ 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
+ 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
+ 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64") ;;
+esac
+# address bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
+ * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval. Expected 32 or 64") ;;
+esac
+# cell bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
+ * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64") ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
+ echo "Setting bitsize flags = $sim_bitsize" 6>&1
+fi],
+[sim_bitsize=""
+if test x"$wire_word_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
+fi
+if test x"$wire_word_msb" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
+fi
+if test x"$wire_address_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
+fi
+if test x"$wire_cell_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
+fi])dnl
])
+AC_SUBST(sim_bitsize)
+
dnl --enable-sim-endian={yes,no,big,little} is for simulators
dnl arg[2] is default target endianness.
AC_DEFUN(SIM_AC_OPTION_ENDIAN,
[
-wire_endian="ifelse([$1],,ifelse([$2],,,[$2]),[$1])"
-default_endian="ifelse([$2],,ifelse([$1],,,[$1]),[$2])"
-default_sim_endian="ifelse([$1],,ifelse([$2],,,-DWITH_DEFAULT_TARGET_BYTE_ORDER=[$2]),-DWITH_TARGET_BYTE_ORDER=[$1])"
+wire_endian="[$1]"
+default_endian="[$2]"
AC_ARG_ENABLE(sim-endian,
[ --enable-sim-endian=endian Specify target byte endian orientation.],
[case "${enableval}" in
yes) if test x"$wire_endian" != x; then
sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+ else
+ echo "No hard-wired endian for target $target" 1>&6
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+ fi
fi;;
no) if test x"$default_endian" != x; then
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+ else
+ echo "No default endian for target $target" 1>&6
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+ fi
fi;;
*) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
-fi],[sim_endian="${default_sim_endian}"])dnl
-AC_SUBST(sim_endian)
+fi],
+[if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+ else
+ sim_endian=
+ fi
+fi])dnl
])
+AC_SUBST(sim_endian)
dnl --enable-sim-hostendian is for users of the simulator when
AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
[
AC_ARG_ENABLE(sim-hostendian,
-[ --enable-sim-hostendain=end Specify host byte endian orientation.],
+[ --enable-sim-hostendian=end Specify host byte endian orientation.],
[case "${enableval}" in
no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
else
sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
fi])dnl
-AC_SUBST(sim_hostendian)
])
+AC_SUBST(sim_hostendian)
+dnl --enable-sim-float is for developers of the simulator
+dnl It specifies the presence of hardware floating point
+dnl And optionally the bitsize of the floating point register.
+dnl arg[1] specifies the presence (or absence) of floating point hardware
+dnl arg[2] specifies the number of bits in a floating point register
AC_DEFUN(SIM_AC_OPTION_FLOAT,
[
-default_sim_floating_point="ifelse([$1],,0,[$1])"
+default_sim_float="[$1]"
+default_sim_float_bitsize="[$2]"
AC_ARG_ENABLE(sim-float,
[ --enable-sim-float Specify that the target processor has floating point hardware.],
[case "${enableval}" in
yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+ 32) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
+ 64) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
*) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
esac
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
echo "Setting float flags = $sim_float" 6>&1
-fi],[sim_float="-DWITH_FLOATING_POINT=${default_sim_floating_point}"])dnl
-AC_SUBST(sim_float)
+fi],[
+sim_float=
+if test x"${default_sim_float}" != x""; then
+ sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
+fi
+if test x"${default_sim_float_bitsize}" != x""; then
+ sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
+fi
+])dnl
])
+AC_SUBST(sim_float)
dnl The argument is the default cache size if none is specified.
[ --enable-sim-scache=size Specify simulator execution cache size.],
[case "${enableval}" in
yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
- no) sim_scace= ;;
+ no) sim_scache="-DWITH_SCACHE=0" ;;
[[0-9]]*) sim_cache=${enableval};;
*) AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
sim_scache="";;
if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
echo "Setting scache size = $sim_scache" 6>&1
fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
-AC_SUBST(sim_scache)
])
+AC_SUBST(sim_scache)
dnl The argument is the default model if none is specified.
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
echo "Setting default model = $sim_default_model" 6>&1
fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
-AC_SUBST(sim_default_model)
])
+AC_SUBST(sim_default_model)
+dnl --enable-sim-hardware is for users of the simulator
+dnl arg[1] Enable sim-hw by default? ("yes" or "no")
+dnl arg[2] is a space separated list of devices that override the defaults
+dnl arg[3] is a space separated list of extra target specific devices.
AC_DEFUN(SIM_AC_OPTION_HARDWARE,
[
+if test x"[$1]" = x"yes"; then
+ sim_hw_p=yes
+else
+ sim_hw_p=no
+fi
+if test "[$2]"; then
+ hardware="core pal glue"
+else
+ hardware="core pal glue [$3]"
+fi
+sim_hw_cflags="-DWITH_HW=1"
+sim_hw="$hardware"
+sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
AC_ARG_ENABLE(sim-hardware,
-[ --enable-sim-hardware=list Specify the hardware to be included in the build.],
-[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+[ --enable-sim-hardware=LIST Specify the hardware to be included in the build.],
+[
case "${enableval}" in
- yes) ;;
- no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
- ,*) hardware="${hardware}${enableval}";;
- *,) hardware="${enableval}${hardware}";;
- *) hardware="${enableval}"'';;
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
+ ,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
+ *,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
-sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
-sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes" && test x"$hardware" != x""; then
- echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
-fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
-sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
-sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test "$sim_hw_p" != yes; then
+ sim_hw_objs=
+ sim_hw_cflags="-DWITH_HW=0"
+ sim_hw=
+else
+ sim_hw_cflags="-DWITH_HW=1"
+ # remove duplicates
+ sim_hw=""
+ sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
+ for i in x $hardware ; do
+ case " $f " in
+ x) ;;
+ *" $i "*) ;;
+ *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
+ esac
+ done
+fi
+if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+fi],[
+if test "$sim_hw_p" != yes; then
+ sim_hw_objs=
+ sim_hw_cflags="-DWITH_HW=0"
+ sim_hw=
+fi
if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi])dnl
-AC_SUBST(sim_hardware)
])
+AC_SUBST(sim_hw_cflags)
+AC_SUBST(sim_hw_objs)
+AC_SUBST(sim_hw)
dnl --enable-sim-inline is for users that wish to ramp up the simulator's
dnl performance by inlining functions.
+dnl Guarantee that unconfigured simulators do not do any inlining
+sim_inline="-DDEFAULT_INLINE=0"
AC_DEFUN(SIM_AC_OPTION_INLINE,
[
default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
case "$enableval" in
no) sim_inline="-DDEFAULT_INLINE=0";;
0) sim_inline="-DDEFAULT_INLINE=0";;
- yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
+ yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
*) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
new_flag=""
case "$x" in
*_INLINE=*) new_flag="-D$x";;
*=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
- *_INLINE) new_flag="-D$x=ALL_INLINE";;
- *) new_flag="-D$x""_INLINE=ALL_INLINE";;
+ *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
+ *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
esac
if test x"$sim_inline" = x""; then
sim_inline="$new_flag"
esac
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
echo "Setting inline flags = $sim_inline" 6>&1
-fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
- sim_inline="${default_sim_inline}"
- if test x"$silent" != x"yes"; then
- echo "Setting inline flags = $sim_inline" 6>&1
+fi],[
+if test "x$cross_compiling" = "xno"; then
+ if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
+ sim_inline="${default_sim_inline}"
+ if test x"$silent" != x"yes"; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+ fi
+ else
+ sim_inline=""
fi
else
- sim_inline=""
+ sim_inline="-DDEFAULT_INLINE=0"
fi])dnl
-AC_SUBST(sim_inline)
])
+AC_SUBST(sim_inline)
AC_DEFUN(SIM_AC_OPTION_PACKAGES,
if test x"$silent" != x"yes"; then
echo "Setting packages to $sim_pk_src, $sim_pk_obj"
fi])dnl
-AC_SUBST(sim_packages)
])
+AC_SUBST(sim_packages)
AC_DEFUN(SIM_AC_OPTION_REGPARM,
if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
echo "Setting regparm flags = $sim_regparm" 6>&1
fi],[sim_regparm=""])dnl
-AC_SUBST(sim_regparm)
])
+AC_SUBST(sim_regparm)
AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
echo "Setting reserved flags = $sim_reserved_bits" 6>&1
fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
-AC_SUBST(sim_reserved_bits)
])
+AC_SUBST(sim_reserved_bits)
AC_DEFUN(SIM_AC_OPTION_SMP,
if test x"$silent" != x"yes"; then
echo "Setting smp flags = $sim_smp" 6>&1
fi])dnl
-AC_SUBST(sim_smp)
])
+AC_SUBST(sim_smp)
AC_DEFUN(SIM_AC_OPTION_STDCALL,
if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
echo "Setting function call flags = $sim_stdcall" 6>&1
fi],[sim_stdcall=""])dnl
-AC_SUBST(sim_stdcall)
])
+AC_SUBST(sim_stdcall)
AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl
-AC_SUBST(sim_xor_endian)
])
+AC_SUBST(sim_xor_endian)
-dnl --enable-sim-warnings is for developers of the simulator.
+dnl --enable-build-warnings is for developers of the simulator.
dnl it enables extra GCC specific warnings.
AC_DEFUN(SIM_AC_OPTION_WARNINGS,
[
-AC_ARG_ENABLE(sim-warnings,
-[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings],
-[case "${enableval}" in
- yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
- no) sim_warnings="-w";;
- *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+AC_ARG_ENABLE(build-warnings,
+[ --enable-build-warnings[=LIST] Enable build-time compiler warnings],
+[build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations"
+case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
-if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
- echo "Setting warning flags = $sim_warnings" 6>&1
-fi],[sim_warnings=""])dnl
-AC_SUBST(sim_warnings)
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+WARN_CFLAGS=""
+WERROR_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) WARN_CFLAGS="${WARN_CFLAGS} $w"
+ esac
+ done
+fi],[build_warnings=""])dnl
])
+AC_SUBST(WARN_CFLAGS)
+AC_SUBST(WERROR_CFLAGS)
dnl Generate the Makefile in a target specific directory.
AC_DEFUN(SIM_AC_OUTPUT,
[
AC_LINK_FILES($sim_link_files, $sim_link_links)
-AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in,
-[case "x$CONFIG_FILES" in xMakefile*)
+AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in,
+[case "x$CONFIG_FILES" in
+ xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
])
])
+
+# This file is derived from `gettext.m4'. The difference is that the
+# included macros assume Cygnus-style source and build trees.
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+AC_DEFUN(CY_WITH_NLS,
+ [AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ USE_INCLUDED_LIBINTL=no
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ AC_DEFINE(ENABLE_NLS)
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If gettext or catgets are available (in this order) we
+ dnl use this. Else we have to fall back to GNU NLS library.
+ dnl catgets is only used if permitted by option --with-catgets.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ AC_CHECK_HEADER(libintl.h,
+ [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+ gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ AC_CHECK_LIB(intl, bindtextdomain,
+ [AC_CACHE_CHECK([for gettext in libintl],
+ gt_cv_func_gettext_libintl,
+ [AC_TRY_LINK([], [return (int) gettext ("")],
+ gt_cv_func_gettext_libintl=yes,
+ gt_cv_func_gettext_libintl=no)])])
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT)
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ AC_CHECK_FUNCS(dcgettext)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [CATOBJEXT=.mo
+ DATADIRNAME=lib])
+ INSTOBJEXT=.mo
+ fi
+ fi
+ ])
+
+ dnl In the standard gettext, we would now check for catgets.
+ dnl However, we never want to use catgets for our releases.
+
+ if test "$CATOBJEXT" = "NONE"; then
+ dnl Neither gettext nor catgets in included in the C library.
+ dnl Fall back on GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_SUBST(MSGFMT)
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/../intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext programs is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl These rules are solely for the distribution goal. While doing this
+ dnl we only have to keep exactly one list of the available catalogs
+ dnl in configure.in.
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATALOGS)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(DATADIRNAME)
+ AC_SUBST(GMOFILES)
+ AC_SUBST(INSTOBJEXT)
+ AC_SUBST(INTLDEPS)
+ AC_SUBST(INTLLIBS)
+ AC_SUBST(INTLOBJS)
+ AC_SUBST(POFILES)
+ AC_SUBST(POSUB)
+ ])
+
+AC_DEFUN(CY_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ AC_CHECK_FUNCS(stpcpy)
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ AC_DEFINE(HAVE_STPCPY)
+ fi
+
+ AM_LC_MESSAGES
+ CY_WITH_NLS
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ dnl The reference to <locale.h> in the installed <libintl.h> file
+ dnl must be resolved because we cannot expect the users of this
+ dnl to define HAVE_LOCALE_H.
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+ AC_SUBST(INCLUDE_LOCALE_H)
+
+ dnl Determine which catalog format we have (if any is needed)
+ dnl For now we know about two different formats:
+ dnl Linux libc-5 and the normal X/Open format
+ if test -f $srcdir/po2tbl.sed.in; then
+ if test "$CATOBJEXT" = ".cat"; then
+ AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+ dnl Transform the SED scripts while copying because some dumb SEDs
+ dnl cannot handle comments.
+ sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+ fi
+ dnl po2tbl.sed is always needed.
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/po2tbl.sed.in > po2tbl.sed
+ fi
+
+ dnl In the intl/Makefile.in we have a special dependency which makes
+ dnl only sense for gettext. We comment this out for non-gettext
+ dnl packages.
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+ AC_SUBST(GT_NO)
+ AC_SUBST(GT_YES)
+
+ MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+ AC_SUBST(MKINSTALLDIRS)
+
+ dnl *** For now the libtool support in intl/Makefile is not for real.
+ l=
+ AC_SUBST(l)
+
+ dnl Generate list of files to be processed by xgettext which will
+ dnl be included in po/Makefile. But only do this if the po directory
+ dnl exists in srcdir.
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ fi
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES)
+ fi
+ fi])
+
+
+dnl --enable-cgen-maint support
+AC_DEFUN(SIM_AC_OPTION_CGEN_MAINT,
+[
+cgen_maint=no
+dnl Default is to use one in build tree.
+cgen=guile
+cgendir='$(srcdir)/../../cgen'
+dnl Having --enable-maintainer-mode take arguments is another way to go.
+dnl ??? One can argue --with is more appropriate if one wants to specify
+dnl a directory name, but what we're doing here is an enable/disable kind
+dnl of thing and specifying both --enable and --with is klunky.
+dnl If you reeely want this to be --with, go ahead and change it.
+AC_ARG_ENABLE(cgen-maint,
+[ --enable-cgen-maint[=DIR] build cgen generated files],
+[case "${enableval}" in
+ yes) cgen_maint=yes ;;
+ no) cgen_maint=no ;;
+ *)
+ # argument is cgen install directory (not implemented yet).
+ # Having a `share' directory might be more appropriate for the .scm,
+ # .cpu, etc. files.
+ cgendir=${cgen_maint}/lib/cgen
+ cgen=guile
+ ;;
+esac])dnl
+dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
+if test x${cgen_maint} != xno ; then
+ CGEN_MAINT=''
+else
+ CGEN_MAINT='#'
+fi
+AC_SUBST(CGEN_MAINT)
+AC_SUBST(cgendir)
+AC_SUBST(cgen)
+])
projects / deliverable / binutils-gdb.git / blobdiff