+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * configure: Regenerate.
+
+2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * config.in: Regenerate.
+ * configure: Likewise.
+
+ * configure: Regenerate.
+
+2008-11-10 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * erc32.c, exec.c: Fix warnings.
+
+2008-07-11 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate to track ../common/common.m4 changes.
+ * config.in: Ditto.
+
+2008-06-09 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * sis.c: Correct spelling error.
+
+2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+ Joseph Myers <joseph@codesourcery.com>
+
+ * configure: Regenerate.
+
+2006-12-21 Hans-Peter Nilsson <hp@axis.com>
+
+ * acconfig.h: Remove.
+ * config.in: Regenerate.
+
+2006-12-20 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure.ac: Add test for readline, substitute READLINE.
+ * Makefile.in (READLINE_LIB): New substituted-contents variable.
+ (SIM_EXTRA_LIBDEPS): Don't set.
+ (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of
+ ../../readline/libreadline.a.
+ * configure: Regenerate.
+
+2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * Makefile.in (func.o, help.o): Correct dependencies.
+
+2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * Makefile.in (install-sis): Honor DESTDIR.
+
+2006-06-13 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure: Regenerated.
+
+2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure: Regenerated.
+
+2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure: Regenerated.
+
+2005-11-28 Mark Mitchell <mark@codesourcery.com>
+
+ * interf.c: (gdb/signals.h): Include it.
+ (sim_stop_reason): Use TARGET_SIGNAL_*.
+
+2005-07-08 Ben Elliston <bje@au.ibm.com>
+
+ * func.c: Remove ANSI_PROTOTYPES conditional code.
+
+2005-03-23 Mark Kettenis <kettenis@gnu.org>
+
+ * configure: Regenerate.
+
+2005-03-07 Jerome Guitton <guitton@gnat.com>
+
+ * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
+ strings.
+ (clear_accex): Ditto.
+ * sim/erc32/interf.c: Remove the redeclaration of fprintf.
+ * sim/erc32/sis.c: Ditto.
+ * sim/erc32/exec.c: Add missing semicolon.
+ * sim/erc32/func.c: Remove definitions of generic_print_address,
+ generic_symbol_at_address, buffer_read_memory and perror_memory, as
+ they are already defined in opcodes/dis-buf.c.
+
+2005-01-14 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Sinclude aclocal.m4 before common.m4. Add
+ explicit call to AC_CONFIG_HEADER.
+ * configure: Regenerate.
+
+2005-01-12 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Update to use ../common/common.m4.
+ * configure: Re-generate.
+
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2005-01-07 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Rename configure.in, require autoconf 2.59.
+ * configure: Re-generate.
+
+2004-12-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate for ../common/aclocal.m4 update.
+
+2004-11-11 Andreas Schwab <schwab@suse.de>
+
+ * interf.c: Include "libiberty.h" instead of declaring buildargv
+ ourselves.
+
+2003-02-27 Andrew Cagney <cagney@redhat.com>
+
+ * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
+
+2002-06-16 Andrew Cagney <ac131313@redhat.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2002-06-08 Andrew Cagney <cagney@redhat.com>
+
+ * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h".
+ * interf.c: Include "gdb/remote-sim.h".
+
+Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2000-03-07 Frank Ch. Eigler <fche@redhat.com>
+
+ From John Dallaway <jld@redhat.co.uk>:
+ * Makefile.in (install-sis): Add $(EXEEXT) for Windows host.
+
+2000-03-03 Jonathan Larmour <jlarmour@redhat.co.uk>
+
+ * func.c (buffer_read_memory): Change type of size to unsigned to
+ match prototype
+
+Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-05-08 Felix Lee <flee@cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-03-03 DJ Delorie <dj@cygnus.com>
+
+ * configure.in: add termcap and -luser32 for host=cygwin
+ * configure: regenerate
+
+1999-02-11 Hugo Tyson <hmt@cygnus.co.uk>
+
+ * exec.c (dispatch_instruction):
+ Correct the sense of the
+ if (!sparclite) {
+ sregs->trap = TRAP_UNIMP;
+ break;
+ }
+ clause that has been pasted around: it's correct in the SCAN and
+ DIVScc (divide step) cases (where it was probably originally
+ written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases
+ ie. instructions only in the SPARC V8 or SPARClite 86x
+ architectures. It was also present when not required for SMUL,
+ SMULcc, UMUL, UMULcc instructions that are present in all
+ architectures.
+
+1999-01-25 Hugo Tyson <hmt@cygnus.co.uk>
+
+ * interf.c (run_sim): Fix a bug in the main loop's handling of
+ annulled delay slot instructions. There is precedent for this
+ change; the _other_ main loop in sis.c gets it right according to
+ my reading of the code.
+
+ The bug is: if an interrupt happens when the next instruction
+ (at sregs->pc) is annulled, the trap is taken (by execute_trap())
+ with the current values of PC and NPC, so when the trap returns,
+ the annulled instruction is indeed executed. Another giveaway is
+ that the annul flag is cleared in execute_trap(): the information
+ is demonstrably discarded.
+
+ The solution is: perform annulling before looking for traps, in
+ fact it's neater to do annulling, see if there's an interrupt and
+ if not, do the instruction, then handle traps be they generated by
+ interrupts pending or by the instruction we might just have done.
+ That's what the sis.c one does.
+
+1999-01-20 Hugo Tyson <hmt@cygnus.co.uk>
+
+ * sis.h: Add asr17 register for support of SparcLITE (at least the
+ Hitachi ones I find before me)
+
+ * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if
+ sparclite. Other ASR numbers than 17 or 0 (Y) trap out.
+ Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto.
+ (execute_trap): Do single-vector-trapping if asr17 bit 0 is set.
+ (init_regs): Initialize y and asr17.
+ NB: In instruction-set space, the Y register is asr0; the
+ instructions have different names for human reasons only.
+
+ * sis.c:
+ * interf.c: Set boolean mode variable dumbio if invoked with
+ argument "-dumbio" and mention it of verbose.
+ * erc32.c: if "dumbio" is set, do not assume that there is a
+ terminal type device attached to stdin/stdout. Do not set
+ buffering or mess with tcsetattr or do any read operations in
+ order to make UART interrupts; not input data is supported.
+ This is necessary to allow the sim to be used within the eCos
+ testing infrastructure where stdin/stdout are pipes to a TCL
+ program; the sim hangs otherwise.
+
+Thu Jul 23 07:17:03 1998 Mark Alexander <marka@cygnus.com>
+
+ * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction.
+
+Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com>
+
+ * func.c (bfd_load): Add special handling of a.out executables.
+
+Sat Jun 13 08:33:25 1998 Mark Alexander <marka@cygnus.com>
+
+ * func.c (bfd_load): Print correct endianness.
+ * interf.c (run_sim): Print debugging information if verbosity level
+ is greater than 2.
+ (sim_open): Repeated -v options now increment verbosity level.
+ (sim_store_register): Handle little-endian case.
+ (flush_window): Print debugging information if verbosity level
+ is greater then 2.
+
+Tue Jun 2 15:20:35 1998 Mark Alexander <marka@cygnus.com>
+
+ * interf.c (sim_open): Use revamped memory_read, which makes
+ byte-swapping unnecessary. Add -sparclite-board option for
+ emulating RAM found on typical SPARClite boards. Print
+ error message for unrecognized option.
+ * erc32.c: Change RAM address and size from constants to variables,
+ to allow emulation of SPARClite board RAM.
+ (fetch_bytes, store_bytes): New helper functions for revamped
+ mememory_read and memory_write.
+ (memory_read, memory_write): Rewrite to store bytes in target
+ byte order instead of storing words in host byte order; this
+ greatly simplifies support of little-endian programs.
+ (get_mem_ptr): Remove unnecessary byte parameter.
+ (sis_memory_write, sis_memory_read): Store words in target
+ byte order instead of host byte order.
+ (byte_swap_words): Remove, no longer needed.
+ * sis.h ((byte_swap_words): Remove declaration, no longer needed.
+ (memory_read): Add new sz parameter.
+ * sis.c (run_sim): Use revamped memory_read, which makes
+ byte-swapping unnecessary.
+ * exec.c (dispatch_instruction): Use revamped memory_read, which
+ makes byte-swapping and double-word fetching unnecessary.
+ * func.c (sparclite_board): Declare new variable.
+ (get_regi): Handle little-endian data.
+ (bfd_load): Recognize little-endian SPARClite as having
+ little-endian data.
+
+Fri May 22 14:23:16 1998 Mark Alexander <marka@cygnus.com>
+
+ * erc32.c (port_init): Print messages only if sis_verbose is true.
+ * func.c (bfd_load): Ditto.
+ * interf.c (sim_open): Ditto.
+
+Thu May 14 23:10:48 1998 Mark Alexander <marka@cygnus.com>
+
+ * sis.h (uint64, int64): Define.
+ * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
+ * (mul64): Simplify calculation of negative result.
+ * (div64): New helper function for 64-bit division.
+ * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
+ and UDIVCC.
+
+Wed May 13 14:59:54 1998 Mark Alexander <marka@cygnus.com>
+
+ * erc32.c (close_port): Don't close stdin; it kills GDB.
+ (byte_swap_words): New function.
+ * sis.h: (byte_swap_words): Declare.
+ * interf.c (run_sim): Always fetch instructions as big-endian.
+ * sis.c (run_sim): Ditto.
+
+Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Sun Apr 26 15:20:17 1998 Tom Tromey <tromey@cygnus.com>
+
+ * acconfig.h: New file.
+ * configure.in: Reverted change of Apr 24; use sinclude again.
+
+Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Fri Apr 24 11:19:52 1998 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in: Don't call sinclude.
+
+Sat Apr 18 12:00:16 1998 Mark Alexander <marka@cygnus.com>
+
+ * func.c (disp_fpu): Fix build problem on big-endian hosts.
+
+Wed Apr 8 19:33:34 1998 Mark Alexander <marka@cygnus.com>
+
+ * erc32.c (sim_stop): Handle SIGINT gracefully.
+ * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us.
+
+Wed Apr 8 18:29:40 1998 Mark Alexander <marka@cygnus.com>
+
+ * exec.c (dispatch_instruction): Change how carry out is calculated
+ in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC.
+
+Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 1 21:19:18 1998 Mark Alexander <marka@cygnus.com>
+
+ * end.c: Update to version 2.7.5, fix compiler warnings and bugs.
+ * erc32.c: Ditto.
+ * exec.c: Ditto.
+ * float.c: Ditto.
+ * func.c: Ditto.
+ * help.c: Ditto.
+ * interf.c: Ditto.
+ * sis.c: Ditto.
+ * sis.h: Ditto.
+
+Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Feb 17 12:41:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interf.c (sim_store_register, sim_fetch_register): Pass in
+ length parameter. Return -1.
+
+Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Tue Aug 26 10:38:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * float.c (__setfpucw): Compile on any i386 target. Not just NT.
+
+ * interf.c (sim_kill): Delete.
+ (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD
+ argument.
+ (sim_load): Don't save start address.
+ (start_address): Delete variable.
+
+Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Mon Aug 25 16:19:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV.
+
+Mon Jun 30 11:45:25 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (install-sis): Change $(srcdir)/sis to sis.
+
+Wed May 28 09:46:13 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interf.c (sim_set_callbacks): Drop SD argument - not applicable.
+ (sim_open): Add callback arg, save it.
+
+Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Apr 22 11:05:01 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interf.c (sim_open): Undo patch to add -E support.
+
+Thu Apr 17 03:03:56 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interf.c (sim_open): Ignore -E arg.
+ (start_address): New static local.
+ (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
+ (sim_create_inferior): Return SIM_RC. Delete arg start_address.
+
+Tue Apr 15 15:16:11 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (install-sis): Depend upon installdirs. Use
+ $(program_transform_name) directly, rather than using
+ $(INSTALL_XFORM).
+
+Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interf.c (sim_open): New arg `kind'.
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
+Thu Mar 13 12:46:04 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interf.c (sim_open): New SIM_DESC result. Argument is now in
+ argv form.
+ (other sim_*): New SIM_DESC argument.
+
+Tue Feb 4 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
+ COMMON_{PRE,POST}_CONFIG_FRAG instead.
+ * configure.in: sinclude ../common/aclocal.m4.
+ * configure: Regenerated.
+
+Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * configure configure.in Makefile.in: Update to new configure
+ scheme which is more compatible with WinGDB builds.
+ * configure.in: Improve comment on how to run autoconf.
+ * configure: Re-run autoconf to get new ../common/aclocal.m4.
+ * Makefile.in: Use autoconf substitution to install common
+ makefile fragment.
+
+Wed Dec 4 18:25:04 1996 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * interf.c (run_sim): Stop the simulator and reset the stdio after
+ breakpoints.
+
+Tue Dec 3 11:54:37 1996 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * configure.in: Look for libtermcap.a.
+ * Makefile.in: Only link in -ltermcap if it exists.
+ * erc32.c: Update to version 2.6a. Fix uart handling.
+ * exec.c: Update to version 2.6a. Add sparclite support.
+ * float.c: Update to version 2.6a. Convert comments to
+ preprocessor warnings. Add __setfpucw() for i385 hosts so floating
+ point exceptions work on win32.
+ * func.c: Update to version 2.6a. Fix uart handling, add support
+ for user error traps.
+ * help.c: Update to version 2.6a. Add help note on user error
+ traps.
+ * interf.c: Update to version 2.6a. Fix uart handling, and add
+ sparclite support.
+ * examples/gccx: Use sparclite cross compiler, not native gcc.
+ * examples/srt0.S: Use "mov" rather than "wr" for manipulating
+ the psr register.
+
+Mon Nov 25 08:28:10 1996 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (run.o): Remove this rule, it hides the one in
+ ../common/Make-common.in that correctly references the source
+ in the sibling ../common directory.
+
Wed Nov 20 01:30:12 1996 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in: Delete stuff moved to ../common/Make-common.in.