#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-sim-bswap Use Host specific BSWAP instruction."
ac_help="$ac_help
--enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
ac_help="$ac_help
--enable-sim-debug=opts Enable debugging flags"
ac_help="$ac_help
- --enable-sim-trace=opts Enable tracing flags"
+ --enable-sim-stdio Specify whether to use stdio for console input/output."
ac_help="$ac_help
- --enable-sim-bswap Use Host specific BSWAP instruction."
+ --enable-sim-trace=opts Enable tracing flags"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 542 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:548: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 557 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
# autoconf.info says this should be called right after AC_INIT.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ ac_cv_prog_gcc_g=yes
else
- ac_cv_prog_cc_g=no
+ ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
+echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:893: checking whether byte ordering is bigendian" >&5
-if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_c_bigendian=unknown
-# See if sys/param.h defines the BYTE_ORDER macro.
-cat > conftest.$ac_ext <<EOF
-#line 900 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/param.h>
-int main() {
-
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
-; return 0; }
-EOF
-if { (eval echo configure:911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- # It does; now see whether it defined to BIG_ENDIAN or not.
-cat > conftest.$ac_ext <<EOF
-#line 915 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/param.h>
-int main() {
-
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
-; return 0; }
-EOF
-if { (eval echo configure:926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_bigendian=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_bigendian=no
-fi
-rm -f conftest*
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-if test $ac_cv_c_bigendian = unknown; then
-if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 946 "configure"
-#include "confdefs.h"
-main () {
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
-}
-EOF
-if { (eval echo configure:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_bigendian=no
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_bigendian=yes
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_c_bigendian" 1>&6
-if test $ac_cv_c_bigendian = yes; then
- cat >> confdefs.h <<\EOF
-#define WORDS_BIGENDIAN 1
-EOF
-
-fi
-
# Put a plausible default for CC_FOR_BUILD in Makefile.
-
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:999: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# Check for common headers.
+for ac_hdr in stdlib.h string.h strings.h unistd.h
+do
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 944 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:949: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
. ${srcdir}/../../bfd/configure.host
+
+# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then
+ enableval="$enable_sim_bswap"
+ case "${enableval}" in
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
+ no) sim_bswap="-DWITH_BSWAP=0";;
+ *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+ echo "Setting bswap flags = $sim_bswap" 6>&1
+fi
+else
+ sim_bswap=""
+fi
+
+
+
# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then
enableval="$enable_sim_cflags"
fi
+
# Check whether --enable-sim-debug or --disable-sim-debug was given.
if test "${enable_sim_debug+set}" = set; then
enableval="$enable_sim_debug"
case "${enableval}" in
- yes) sim_debug="-DDEBUG=7";;
- no) sim_debug="-DDEBUG=0";;
- *) sim_debug="-DDEBUG='(${enableval})'";;
+ yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
+ no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
+ *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
echo "Setting sim debug = $sim_debug" 6>&1
fi
+
+# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then
+ enableval="$enable_sim_stdio"
+ case "${enableval}" in
+ yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+ no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+ *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+ echo "Setting stdio flags = $sim_stdio" 6>&1
+fi
+else
+ sim_stdio=""
+fi
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ *) sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
fi
-# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then
- enableval="$enable_sim_bswap"
- case "${enableval}" in
- yes) sim_bswap="-DUSE_BSWAP";;
- no) sim_bswap="";;
- *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- sim_bswap=""
+ cat > conftest.$ac_ext <<EOF
+#line 1069 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() { return 0; }
+int t() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:1087: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_type_signal=void
+else
+ rm -rf conftest*
+ ac_cv_type_signal=int
fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
sim_link_files=
sim_link_files=../common/tconfig.in
fi
+# targ-vals.def points to the libc macro description file.
case "${target}" in
-*-*-*)
- sim_link_files="${sim_link_files} ../common/nltvals.def"
- sim_link_links="${sim_link_links} targ-vals.def"
- ;;
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
esac
-
-
-COMMON_MAKEFILE_FRAG=makefile-temp-$$
-cat > $COMMON_MAKEFILE_FRAG <<EOF
-VPATH = ${srcdir}
-srcdir = ${srcdir}
-srcroot = \$(srcdir)/../..
-
-prefix = ${prefix}
-exec_prefix = ${exec_prefix}
-
-host_alias = ${host_alias}
-target_alias = ${target_alias}
-program_transform_name = ${program_transform_name}
-bindir = ${bindir}
-
-libdir = ${libdir}
-tooldir = \$(libdir)/\$(target_alias)
-
-datadir = ${datadir}
-mandir = ${mandir}
-man1dir = \$(mandir)/man1
-infodir = ${infodir}
-includedir = ${includedir}
-
-SHELL = /bin/sh
-
-INSTALL = \$(srcroot)/install.sh -c
-INSTALL_PROGRAM = ${INSTALL_PROGRAM}
-INSTALL_DATA = ${INSTALL_DATA}
-INSTALL_XFORM = \$(INSTALL) -t='$(program_transform_name)'
-INSTALL_XFORM1= \$(INSTALL_XFORM) -b=.1
-
-CC = ${CC}
-CC_FOR_BUILD = ${CC_FOR_BUILD}
-CFLAGS = ${CFLAGS}
-SIM_CFLAGS = ${sim_cflags}
-SIM_DEBUG = ${sim_debug}
-SIM_TRACE = ${sim_trace}
-SIM_BSWAP = ${sim_bswap}
-
-HDEFINES = ${HDEFINES}
-TDEFINES =
-
-AR = ${AR}
-AR_FLAGS = rc
-RANLIB = ${RANLIB}
-MAKEINFO = makeinfo
-
-# Each simulator's Makefile.in defines one or more of these variables
-# as necessary. The SIM_AC_OUTPUT macro then inserts those values
-# at '## Config'.
-
-# List of object files, less common parts.
-#SIM_OBJS =
-# List of flags to always pass to $(CC).
-#SIM_EXTRA_CFLAGS =
-# List of extra libraries to link with.
-#SIM_EXTRA_LIBS =
-# List of extra program dependencies.
-#SIM_EXTRA_LIBDEPS =
-# Dependency of 'all' to build any extra files.
-#SIM_EXTRA_ALL =
-# Dependency of 'install' to install any extra files.
-#SIM_EXTRA_INSTALL =
-# Dependency of 'clean' to clean any extra files.
-#SIM_EXTRA_CLEAN =
-
-CONFIG_CFLAGS = ${DEFS} \$(SIM_CFLAGS) \$(SIM_DEBUG) \$(SIM_TRACE) \$(SIM_BSWAP) \
- \$(SIM_EXTRA_CFLAGS) \$(HDEFINES) \$(TDEFINES)
-CSEARCH = -I. -I\$(srcdir) -I../common -I\$(srcdir)/../common \
- -I../../include -I\$(srcroot)/include \
- -I../../bfd -I\$(srcroot)/bfd -I\$(srcroot)/gdb \
- -I../../opcodes -I\$(srcroot)/opcodes
-ALL_CFLAGS = \$(CONFIG_CFLAGS) \$(CSEARCH) \$(CFLAGS)
-BUILD_CFLAGS = -g -O \$(CSEARCH)
-
-.NOEXPORT:
-MAKEOVERRIDES=
-
-LIBIBERTY_LIB = ../../libiberty/libiberty.a
-BFD_LIB = ../../bfd/libbfd.a
-OPCODES_LIB = ../../opcodes/libopcodes.a
-CONFIG_LIBS = ${LIBS}
-LIBDEPS = \$(BFD_LIB) \$(OPCODES_LIB) \$(LIBIBERTY_LIB) \
- \$(SIM_EXTRA_LIBDEPS)
-EXTRA_LIBS = \$(BFD_LIB) \$(OPCODES_LIB) \$(LIBIBERTY_LIB) \
- \$(CONFIG_LIBS) \$(SIM_EXTRA_LIBS)
-
-LIB_OBJS = callback.o targ-map.o \$(SIM_OBJS)
-
-all: run libsim.a \$(SIM_EXTRA_ALL)
-
-libsim.a: \$(LIB_OBJS)
- rm -f libsim.a
- \$(AR) \$(ARFLAGS) libsim.a \$(LIB_OBJS)
- \$(RANLIB) libsim.a
-
-run: run.o libsim.a \$(LIBDEPS)
- \$(CC) \$(ALL_CFLAGS) -o run \
- run.o libsim.a \$(EXTRA_LIBS)
-
-run.o: \$(srcdir)/../common/run.c config.h tconfig.h \
- \$(srcroot)/include/callback.h
- \$(CC) -c \$(srcdir)/../common/run.c \$(ALL_CFLAGS)
-
-callback.o: \$(srcdir)/../common/callback.c config.h tconfig.h \
- \$(srcroot)/include/callback.h targ-vals.h
- \$(CC) -c \$(srcdir)/../common/callback.c \$(ALL_CFLAGS)
-
-gentmap: \$(srcdir)/../common/gentmap.c targ-vals.def
- \$(CC_FOR_BUILD) \$(srcdir)/../common/gentmap.c -o gentmap \$(BUILD_CFLAGS) -I\$(srcdir)/../common
-
-targ-vals.h: gentmap
- rm -f targ-vals.h
- ./gentmap -h >targ-vals.h
-
-targ-map.c: gentmap
- rm -f targ-map.c
- ./gentmap -c >targ-map.c
-
-install: install-common \$(SIM_EXTRA_INSTALL)
-
-install-common:
- \$(INSTALL_XFORM) run \$(bindir)/run
-
-check:
-
-info:
-clean-info:
-install-info:
-
-tags etags: TAGS
-
-TAGS: force
- etags *.c *.h
-
-clean: \$(SIM_EXTRA_CLEAN)
- rm -f *.[oa] *~ core gentmap targ-map.c targ-vals.h
- rm -f run libsim.a
-
-distclean mostlyclean maintainer-clean realclean: clean
- rm -f TAGS
- rm -f Makefile config.cache config.log config.status
- rm -f tconfig.h config.h stamp-h targ-vals.def
-
-.c.o:
- \$(CC) -c \$(ALL_CFLAGS) \$<
-
-# Dummy target to force execution of dependent targets.
-force:
-
-Makefile: Makefile.in config.status
- CONFIG_HEADERS= \$(SHELL) ./config.status
-
-config.status: configure
- \$(SHELL) ./config.status --recheck
-
-config.h: stamp-h ; @true
-stamp-h: config.in config.status
- CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \$(SHELL) ./config.status
-
-# We can't add dependencies to configure because it causes too much trouble
-# to end users if configure's timestamp is out of sync.
-.PHONY: run-autoconf
-run-autoconf:
- cd \$(srcdir) && autoconf -l ../common
-EOF
-
-
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1286: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 1301 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1318 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
for ac_hdr in unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1350: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1355 "configure"
+#line 1134 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
- trap '' 1 2 15
+trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# --recheck option to rerun configure.
#
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@HDEFINES@%$HDEFINES%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
+s%@CPP@%$CPP%g
+s%@sim_bswap@%$sim_bswap%g
s%@sim_cflags@%$sim_cflags%g
s%@sim_debug@%$sim_debug%g
+s%@sim_stdio@%$sim_stdio%g
s%@sim_trace@%$sim_trace%g
-s%@sim_bswap@%$sim_bswap%g
-/@COMMON_MAKEFILE_FRAG@/r $COMMON_MAKEFILE_FRAG
-s%@COMMON_MAKEFILE_FRAG@%%g
-s%@CPP@%$CPP%g
CEOF
EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+ # Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
-
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
-rm -f conftest.s*
+rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
+CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
+ cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
+# Maximum number of lines to put in a single here document.
+ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
+case "x$CONFIG_FILES" in xMakefile*)
+ echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ -e '/^## COMMON_POST_/ r Makesim2.tmp' \
+ <Makefile.sim >Makefile
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+ ;;
+ esac
case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
-
+
exit 0
EOF
chmod +x $CONFIG_STATUS
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-rm $COMMON_MAKEFILE_FRAG
-
-