#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/core.h>
/* codec private data */
struct wm8904_priv {
+ struct regmap *regmap;
enum wm8904_type devtype;
int dcs_state[WM8904_NUM_DCS_CHANNELS];
};
-static const u16 wm8904_reg[WM8904_MAX_REGISTER + 1] = {
- 0x8904, /* R0 - SW Reset and ID */
- 0x0000, /* R1 - Revision */
- 0x0000, /* R2 */
- 0x0000, /* R3 */
- 0x0018, /* R4 - Bias Control 0 */
- 0x0000, /* R5 - VMID Control 0 */
- 0x0000, /* R6 - Mic Bias Control 0 */
- 0x0000, /* R7 - Mic Bias Control 1 */
- 0x0001, /* R8 - Analogue DAC 0 */
- 0x9696, /* R9 - mic Filter Control */
- 0x0001, /* R10 - Analogue ADC 0 */
- 0x0000, /* R11 */
- 0x0000, /* R12 - Power Management 0 */
- 0x0000, /* R13 */
- 0x0000, /* R14 - Power Management 2 */
- 0x0000, /* R15 - Power Management 3 */
- 0x0000, /* R16 */
- 0x0000, /* R17 */
- 0x0000, /* R18 - Power Management 6 */
- 0x0000, /* R19 */
- 0x945E, /* R20 - Clock Rates 0 */
- 0x0C05, /* R21 - Clock Rates 1 */
- 0x0006, /* R22 - Clock Rates 2 */
- 0x0000, /* R23 */
- 0x0050, /* R24 - Audio Interface 0 */
- 0x000A, /* R25 - Audio Interface 1 */
- 0x00E4, /* R26 - Audio Interface 2 */
- 0x0040, /* R27 - Audio Interface 3 */
- 0x0000, /* R28 */
- 0x0000, /* R29 */
- 0x00C0, /* R30 - DAC Digital Volume Left */
- 0x00C0, /* R31 - DAC Digital Volume Right */
- 0x0000, /* R32 - DAC Digital 0 */
- 0x0008, /* R33 - DAC Digital 1 */
- 0x0000, /* R34 */
- 0x0000, /* R35 */
- 0x00C0, /* R36 - ADC Digital Volume Left */
- 0x00C0, /* R37 - ADC Digital Volume Right */
- 0x0010, /* R38 - ADC Digital 0 */
- 0x0000, /* R39 - Digital Microphone 0 */
- 0x01AF, /* R40 - DRC 0 */
- 0x3248, /* R41 - DRC 1 */
- 0x0000, /* R42 - DRC 2 */
- 0x0000, /* R43 - DRC 3 */
- 0x0085, /* R44 - Analogue Left Input 0 */
- 0x0085, /* R45 - Analogue Right Input 0 */
- 0x0044, /* R46 - Analogue Left Input 1 */
- 0x0044, /* R47 - Analogue Right Input 1 */
- 0x0000, /* R48 */
- 0x0000, /* R49 */
- 0x0000, /* R50 */
- 0x0000, /* R51 */
- 0x0000, /* R52 */
- 0x0000, /* R53 */
- 0x0000, /* R54 */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x002D, /* R57 - Analogue OUT1 Left */
- 0x002D, /* R58 - Analogue OUT1 Right */
- 0x0039, /* R59 - Analogue OUT2 Left */
- 0x0039, /* R60 - Analogue OUT2 Right */
- 0x0000, /* R61 - Analogue OUT12 ZC */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x0000, /* R64 */
- 0x0000, /* R65 */
- 0x0000, /* R66 */
- 0x0000, /* R67 - DC Servo 0 */
- 0x0000, /* R68 - DC Servo 1 */
- 0xAAAA, /* R69 - DC Servo 2 */
- 0x0000, /* R70 */
- 0xAAAA, /* R71 - DC Servo 4 */
- 0xAAAA, /* R72 - DC Servo 5 */
- 0x0000, /* R73 - DC Servo 6 */
- 0x0000, /* R74 - DC Servo 7 */
- 0x0000, /* R75 - DC Servo 8 */
- 0x0000, /* R76 - DC Servo 9 */
- 0x0000, /* R77 - DC Servo Readback 0 */
- 0x0000, /* R78 */
- 0x0000, /* R79 */
- 0x0000, /* R80 */
- 0x0000, /* R81 */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0000, /* R88 */
- 0x0000, /* R89 */
- 0x0000, /* R90 - Analogue HP 0 */
- 0x0000, /* R91 */
- 0x0000, /* R92 */
- 0x0000, /* R93 */
- 0x0000, /* R94 - Analogue Lineout 0 */
- 0x0000, /* R95 */
- 0x0000, /* R96 */
- 0x0000, /* R97 */
- 0x0000, /* R98 - Charge Pump 0 */
- 0x0000, /* R99 */
- 0x0000, /* R100 */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x0004, /* R104 - Class W 0 */
- 0x0000, /* R105 */
- 0x0000, /* R106 */
- 0x0000, /* R107 */
- 0x0000, /* R108 - Write Sequencer 0 */
- 0x0000, /* R109 - Write Sequencer 1 */
- 0x0000, /* R110 - Write Sequencer 2 */
- 0x0000, /* R111 - Write Sequencer 3 */
- 0x0000, /* R112 - Write Sequencer 4 */
- 0x0000, /* R113 */
- 0x0000, /* R114 */
- 0x0000, /* R115 */
- 0x0000, /* R116 - FLL Control 1 */
- 0x0007, /* R117 - FLL Control 2 */
- 0x0000, /* R118 - FLL Control 3 */
- 0x2EE0, /* R119 - FLL Control 4 */
- 0x0004, /* R120 - FLL Control 5 */
- 0x0014, /* R121 - GPIO Control 1 */
- 0x0010, /* R122 - GPIO Control 2 */
- 0x0010, /* R123 - GPIO Control 3 */
- 0x0000, /* R124 - GPIO Control 4 */
- 0x0000, /* R125 */
- 0x0000, /* R126 - Digital Pulls */
- 0x0000, /* R127 - Interrupt Status */
- 0xFFFF, /* R128 - Interrupt Status Mask */
- 0x0000, /* R129 - Interrupt Polarity */
- 0x0000, /* R130 - Interrupt Debounce */
- 0x0000, /* R131 */
- 0x0000, /* R132 */
- 0x0000, /* R133 */
- 0x0000, /* R134 - EQ1 */
- 0x000C, /* R135 - EQ2 */
- 0x000C, /* R136 - EQ3 */
- 0x000C, /* R137 - EQ4 */
- 0x000C, /* R138 - EQ5 */
- 0x000C, /* R139 - EQ6 */
- 0x0FCA, /* R140 - EQ7 */
- 0x0400, /* R141 - EQ8 */
- 0x00D8, /* R142 - EQ9 */
- 0x1EB5, /* R143 - EQ10 */
- 0xF145, /* R144 - EQ11 */
- 0x0B75, /* R145 - EQ12 */
- 0x01C5, /* R146 - EQ13 */
- 0x1C58, /* R147 - EQ14 */
- 0xF373, /* R148 - EQ15 */
- 0x0A54, /* R149 - EQ16 */
- 0x0558, /* R150 - EQ17 */
- 0x168E, /* R151 - EQ18 */
- 0xF829, /* R152 - EQ19 */
- 0x07AD, /* R153 - EQ20 */
- 0x1103, /* R154 - EQ21 */
- 0x0564, /* R155 - EQ22 */
- 0x0559, /* R156 - EQ23 */
- 0x4000, /* R157 - EQ24 */
- 0x0000, /* R158 */
- 0x0000, /* R159 */
- 0x0000, /* R160 */
- 0x0000, /* R161 - Control Interface Test 1 */
- 0x0000, /* R162 */
- 0x0000, /* R163 */
- 0x0000, /* R164 */
- 0x0000, /* R165 */
- 0x0000, /* R166 */
- 0x0000, /* R167 */
- 0x0000, /* R168 */
- 0x0000, /* R169 */
- 0x0000, /* R170 */
- 0x0000, /* R171 */
- 0x0000, /* R172 */
- 0x0000, /* R173 */
- 0x0000, /* R174 */
- 0x0000, /* R175 */
- 0x0000, /* R176 */
- 0x0000, /* R177 */
- 0x0000, /* R178 */
- 0x0000, /* R179 */
- 0x0000, /* R180 */
- 0x0000, /* R181 */
- 0x0000, /* R182 */
- 0x0000, /* R183 */
- 0x0000, /* R184 */
- 0x0000, /* R185 */
- 0x0000, /* R186 */
- 0x0000, /* R187 */
- 0x0000, /* R188 */
- 0x0000, /* R189 */
- 0x0000, /* R190 */
- 0x0000, /* R191 */
- 0x0000, /* R192 */
- 0x0000, /* R193 */
- 0x0000, /* R194 */
- 0x0000, /* R195 */
- 0x0000, /* R196 */
- 0x0000, /* R197 */
- 0x0000, /* R198 */
- 0x0000, /* R199 */
- 0x0000, /* R200 */
- 0x0000, /* R201 */
- 0x0000, /* R202 */
- 0x0000, /* R203 */
- 0x0000, /* R204 - Analogue Output Bias 0 */
- 0x0000, /* R205 */
- 0x0000, /* R206 */
- 0x0000, /* R207 */
- 0x0000, /* R208 */
- 0x0000, /* R209 */
- 0x0000, /* R210 */
- 0x0000, /* R211 */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 */
- 0x0000, /* R216 */
- 0x0000, /* R217 */
- 0x0000, /* R218 */
- 0x0000, /* R219 */
- 0x0000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 */
- 0x0000, /* R225 */
- 0x0000, /* R226 */
- 0x0000, /* R227 */
- 0x0000, /* R228 */
- 0x0000, /* R229 */
- 0x0000, /* R230 */
- 0x0000, /* R231 */
- 0x0000, /* R232 */
- 0x0000, /* R233 */
- 0x0000, /* R234 */
- 0x0000, /* R235 */
- 0x0000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0000, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0000, /* R243 */
- 0x0000, /* R244 */
- 0x0000, /* R245 */
- 0x0000, /* R246 */
- 0x0000, /* R247 - FLL NCO Test 0 */
- 0x0019, /* R248 - FLL NCO Test 1 */
+static const struct reg_default wm8904_reg_defaults[] = {
+ { 4, 0x0018 }, /* R4 - Bias Control 0 */
+ { 5, 0x0000 }, /* R5 - VMID Control 0 */
+ { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
+ { 7, 0x0000 }, /* R7 - Mic Bias Control 1 */
+ { 8, 0x0001 }, /* R8 - Analogue DAC 0 */
+ { 9, 0x9696 }, /* R9 - mic Filter Control */
+ { 10, 0x0001 }, /* R10 - Analogue ADC 0 */
+ { 12, 0x0000 }, /* R12 - Power Management 0 */
+ { 14, 0x0000 }, /* R14 - Power Management 2 */
+ { 15, 0x0000 }, /* R15 - Power Management 3 */
+ { 18, 0x0000 }, /* R18 - Power Management 6 */
+ { 19, 0x945E }, /* R20 - Clock Rates 0 */
+ { 21, 0x0C05 }, /* R21 - Clock Rates 1 */
+ { 22, 0x0006 }, /* R22 - Clock Rates 2 */
+ { 24, 0x0050 }, /* R24 - Audio Interface 0 */
+ { 25, 0x000A }, /* R25 - Audio Interface 1 */
+ { 26, 0x00E4 }, /* R26 - Audio Interface 2 */
+ { 27, 0x0040 }, /* R27 - Audio Interface 3 */
+ { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
+ { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
+ { 32, 0x0000 }, /* R32 - DAC Digital 0 */
+ { 33, 0x0008 }, /* R33 - DAC Digital 1 */
+ { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
+ { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
+ { 38, 0x0010 }, /* R38 - ADC Digital 0 */
+ { 39, 0x0000 }, /* R39 - Digital Microphone 0 */
+ { 40, 0x01AF }, /* R40 - DRC 0 */
+ { 41, 0x3248 }, /* R41 - DRC 1 */
+ { 42, 0x0000 }, /* R42 - DRC 2 */
+ { 43, 0x0000 }, /* R43 - DRC 3 */
+ { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
+ { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
+ { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
+ { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
+ { 57, 0x002D }, /* R57 - Analogue OUT1 Left */
+ { 58, 0x002D }, /* R58 - Analogue OUT1 Right */
+ { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
+ { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
+ { 61, 0x0000 }, /* R61 - Analogue OUT12 ZC */
+ { 67, 0x0000 }, /* R67 - DC Servo 0 */
+ { 69, 0xAAAA }, /* R69 - DC Servo 2 */
+ { 71, 0xAAAA }, /* R71 - DC Servo 4 */
+ { 72, 0xAAAA }, /* R72 - DC Servo 5 */
+ { 90, 0x0000 }, /* R90 - Analogue HP 0 */
+ { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
+ { 98, 0x0000 }, /* R98 - Charge Pump 0 */
+ { 104, 0x0004 }, /* R104 - Class W 0 */
+ { 108, 0x0000 }, /* R108 - Write Sequencer 0 */
+ { 109, 0x0000 }, /* R109 - Write Sequencer 1 */
+ { 110, 0x0000 }, /* R110 - Write Sequencer 2 */
+ { 111, 0x0000 }, /* R111 - Write Sequencer 3 */
+ { 112, 0x0000 }, /* R112 - Write Sequencer 4 */
+ { 116, 0x0000 }, /* R116 - FLL Control 1 */
+ { 117, 0x0007 }, /* R117 - FLL Control 2 */
+ { 118, 0x0000 }, /* R118 - FLL Control 3 */
+ { 119, 0x2EE0 }, /* R119 - FLL Control 4 */
+ { 120, 0x0004 }, /* R120 - FLL Control 5 */
+ { 121, 0x0014 }, /* R121 - GPIO Control 1 */
+ { 122, 0x0010 }, /* R122 - GPIO Control 2 */
+ { 123, 0x0010 }, /* R123 - GPIO Control 3 */
+ { 124, 0x0000 }, /* R124 - GPIO Control 4 */
+ { 126, 0x0000 }, /* R126 - Digital Pulls */
+ { 128, 0xFFFF }, /* R128 - Interrupt Status Mask */
+ { 129, 0x0000 }, /* R129 - Interrupt Polarity */
+ { 130, 0x0000 }, /* R130 - Interrupt Debounce */
+ { 134, 0x0000 }, /* R134 - EQ1 */
+ { 135, 0x000C }, /* R135 - EQ2 */
+ { 136, 0x000C }, /* R136 - EQ3 */
+ { 137, 0x000C }, /* R137 - EQ4 */
+ { 138, 0x000C }, /* R138 - EQ5 */
+ { 139, 0x000C }, /* R139 - EQ6 */
+ { 140, 0x0FCA }, /* R140 - EQ7 */
+ { 141, 0x0400 }, /* R141 - EQ8 */
+ { 142, 0x00D8 }, /* R142 - EQ9 */
+ { 143, 0x1EB5 }, /* R143 - EQ10 */
+ { 144, 0xF145 }, /* R144 - EQ11 */
+ { 145, 0x0B75 }, /* R145 - EQ12 */
+ { 146, 0x01C5 }, /* R146 - EQ13 */
+ { 147, 0x1C58 }, /* R147 - EQ14 */
+ { 148, 0xF373 }, /* R148 - EQ15 */
+ { 149, 0x0A54 }, /* R149 - EQ16 */
+ { 150, 0x0558 }, /* R150 - EQ17 */
+ { 151, 0x168E }, /* R151 - EQ18 */
+ { 152, 0xF829 }, /* R152 - EQ19 */
+ { 153, 0x07AD }, /* R153 - EQ20 */
+ { 154, 0x1103 }, /* R154 - EQ21 */
+ { 155, 0x0564 }, /* R155 - EQ22 */
+ { 156, 0x0559 }, /* R156 - EQ23 */
+ { 157, 0x4000 }, /* R157 - EQ24 */
+ { 161, 0x0000 }, /* R161 - Control Interface Test 1 */
+ { 204, 0x0000 }, /* R204 - Analogue Output Bias 0 */
+ { 247, 0x0000 }, /* R247 - FLL NCO Test 0 */
+ { 248, 0x0019 }, /* R248 - FLL NCO Test 1 */
};
-static struct {
- int readable;
- int writable;
- int vol;
-} wm8904_access[] = {
- { 0xFFFF, 0xFFFF, 1 }, /* R0 - SW Reset and ID */
- { 0x0000, 0x0000, 0 }, /* R1 - Revision */
- { 0x0000, 0x0000, 0 }, /* R2 */
- { 0x0000, 0x0000, 0 }, /* R3 */
- { 0x001F, 0x001F, 0 }, /* R4 - Bias Control 0 */
- { 0x0047, 0x0047, 0 }, /* R5 - VMID Control 0 */
- { 0x007F, 0x007F, 0 }, /* R6 - Mic Bias Control 0 */
- { 0xC007, 0xC007, 0 }, /* R7 - Mic Bias Control 1 */
- { 0x001E, 0x001E, 0 }, /* R8 - Analogue DAC 0 */
- { 0xFFFF, 0xFFFF, 0 }, /* R9 - mic Filter Control */
- { 0x0001, 0x0001, 0 }, /* R10 - Analogue ADC 0 */
- { 0x0000, 0x0000, 0 }, /* R11 */
- { 0x0003, 0x0003, 0 }, /* R12 - Power Management 0 */
- { 0x0000, 0x0000, 0 }, /* R13 */
- { 0x0003, 0x0003, 0 }, /* R14 - Power Management 2 */
- { 0x0003, 0x0003, 0 }, /* R15 - Power Management 3 */
- { 0x0000, 0x0000, 0 }, /* R16 */
- { 0x0000, 0x0000, 0 }, /* R17 */
- { 0x000F, 0x000F, 0 }, /* R18 - Power Management 6 */
- { 0x0000, 0x0000, 0 }, /* R19 */
- { 0x7001, 0x7001, 0 }, /* R20 - Clock Rates 0 */
- { 0x3C07, 0x3C07, 0 }, /* R21 - Clock Rates 1 */
- { 0xD00F, 0xD00F, 0 }, /* R22 - Clock Rates 2 */
- { 0x0000, 0x0000, 0 }, /* R23 */
- { 0x1FFF, 0x1FFF, 0 }, /* R24 - Audio Interface 0 */
- { 0x3DDF, 0x3DDF, 0 }, /* R25 - Audio Interface 1 */
- { 0x0F1F, 0x0F1F, 0 }, /* R26 - Audio Interface 2 */
- { 0x0FFF, 0x0FFF, 0 }, /* R27 - Audio Interface 3 */
- { 0x0000, 0x0000, 0 }, /* R28 */
- { 0x0000, 0x0000, 0 }, /* R29 */
- { 0x00FF, 0x01FF, 0 }, /* R30 - DAC Digital Volume Left */
- { 0x00FF, 0x01FF, 0 }, /* R31 - DAC Digital Volume Right */
- { 0x0FFF, 0x0FFF, 0 }, /* R32 - DAC Digital 0 */
- { 0x1E4E, 0x1E4E, 0 }, /* R33 - DAC Digital 1 */
- { 0x0000, 0x0000, 0 }, /* R34 */
- { 0x0000, 0x0000, 0 }, /* R35 */
- { 0x00FF, 0x01FF, 0 }, /* R36 - ADC Digital Volume Left */
- { 0x00FF, 0x01FF, 0 }, /* R37 - ADC Digital Volume Right */
- { 0x0073, 0x0073, 0 }, /* R38 - ADC Digital 0 */
- { 0x1800, 0x1800, 0 }, /* R39 - Digital Microphone 0 */
- { 0xDFEF, 0xDFEF, 0 }, /* R40 - DRC 0 */
- { 0xFFFF, 0xFFFF, 0 }, /* R41 - DRC 1 */
- { 0x003F, 0x003F, 0 }, /* R42 - DRC 2 */
- { 0x07FF, 0x07FF, 0 }, /* R43 - DRC 3 */
- { 0x009F, 0x009F, 0 }, /* R44 - Analogue Left Input 0 */
- { 0x009F, 0x009F, 0 }, /* R45 - Analogue Right Input 0 */
- { 0x007F, 0x007F, 0 }, /* R46 - Analogue Left Input 1 */
- { 0x007F, 0x007F, 0 }, /* R47 - Analogue Right Input 1 */
- { 0x0000, 0x0000, 0 }, /* R48 */
- { 0x0000, 0x0000, 0 }, /* R49 */
- { 0x0000, 0x0000, 0 }, /* R50 */
- { 0x0000, 0x0000, 0 }, /* R51 */
- { 0x0000, 0x0000, 0 }, /* R52 */
- { 0x0000, 0x0000, 0 }, /* R53 */
- { 0x0000, 0x0000, 0 }, /* R54 */
- { 0x0000, 0x0000, 0 }, /* R55 */
- { 0x0000, 0x0000, 0 }, /* R56 */
- { 0x017F, 0x01FF, 0 }, /* R57 - Analogue OUT1 Left */
- { 0x017F, 0x01FF, 0 }, /* R58 - Analogue OUT1 Right */
- { 0x017F, 0x01FF, 0 }, /* R59 - Analogue OUT2 Left */
- { 0x017F, 0x01FF, 0 }, /* R60 - Analogue OUT2 Right */
- { 0x000F, 0x000F, 0 }, /* R61 - Analogue OUT12 ZC */
- { 0x0000, 0x0000, 0 }, /* R62 */
- { 0x0000, 0x0000, 0 }, /* R63 */
- { 0x0000, 0x0000, 0 }, /* R64 */
- { 0x0000, 0x0000, 0 }, /* R65 */
- { 0x0000, 0x0000, 0 }, /* R66 */
- { 0x000F, 0x000F, 0 }, /* R67 - DC Servo 0 */
- { 0xFFFF, 0xFFFF, 1 }, /* R68 - DC Servo 1 */
- { 0x0F0F, 0x0F0F, 0 }, /* R69 - DC Servo 2 */
- { 0x0000, 0x0000, 0 }, /* R70 */
- { 0x007F, 0x007F, 0 }, /* R71 - DC Servo 4 */
- { 0x007F, 0x007F, 0 }, /* R72 - DC Servo 5 */
- { 0x00FF, 0x00FF, 1 }, /* R73 - DC Servo 6 */
- { 0x00FF, 0x00FF, 1 }, /* R74 - DC Servo 7 */
- { 0x00FF, 0x00FF, 1 }, /* R75 - DC Servo 8 */
- { 0x00FF, 0x00FF, 1 }, /* R76 - DC Servo 9 */
- { 0x0FFF, 0x0000, 1 }, /* R77 - DC Servo Readback 0 */
- { 0x0000, 0x0000, 0 }, /* R78 */
- { 0x0000, 0x0000, 0 }, /* R79 */
- { 0x0000, 0x0000, 0 }, /* R80 */
- { 0x0000, 0x0000, 0 }, /* R81 */
- { 0x0000, 0x0000, 0 }, /* R82 */
- { 0x0000, 0x0000, 0 }, /* R83 */
- { 0x0000, 0x0000, 0 }, /* R84 */
- { 0x0000, 0x0000, 0 }, /* R85 */
- { 0x0000, 0x0000, 0 }, /* R86 */
- { 0x0000, 0x0000, 0 }, /* R87 */
- { 0x0000, 0x0000, 0 }, /* R88 */
- { 0x0000, 0x0000, 0 }, /* R89 */
- { 0x00FF, 0x00FF, 0 }, /* R90 - Analogue HP 0 */
- { 0x0000, 0x0000, 0 }, /* R91 */
- { 0x0000, 0x0000, 0 }, /* R92 */
- { 0x0000, 0x0000, 0 }, /* R93 */
- { 0x00FF, 0x00FF, 0 }, /* R94 - Analogue Lineout 0 */
- { 0x0000, 0x0000, 0 }, /* R95 */
- { 0x0000, 0x0000, 0 }, /* R96 */
- { 0x0000, 0x0000, 0 }, /* R97 */
- { 0x0001, 0x0001, 0 }, /* R98 - Charge Pump 0 */
- { 0x0000, 0x0000, 0 }, /* R99 */
- { 0x0000, 0x0000, 0 }, /* R100 */
- { 0x0000, 0x0000, 0 }, /* R101 */
- { 0x0000, 0x0000, 0 }, /* R102 */
- { 0x0000, 0x0000, 0 }, /* R103 */
- { 0x0001, 0x0001, 0 }, /* R104 - Class W 0 */
- { 0x0000, 0x0000, 0 }, /* R105 */
- { 0x0000, 0x0000, 0 }, /* R106 */
- { 0x0000, 0x0000, 0 }, /* R107 */
- { 0x011F, 0x011F, 0 }, /* R108 - Write Sequencer 0 */
- { 0x7FFF, 0x7FFF, 0 }, /* R109 - Write Sequencer 1 */
- { 0x4FFF, 0x4FFF, 0 }, /* R110 - Write Sequencer 2 */
- { 0x003F, 0x033F, 0 }, /* R111 - Write Sequencer 3 */
- { 0x03F1, 0x0000, 0 }, /* R112 - Write Sequencer 4 */
- { 0x0000, 0x0000, 0 }, /* R113 */
- { 0x0000, 0x0000, 0 }, /* R114 */
- { 0x0000, 0x0000, 0 }, /* R115 */
- { 0x0007, 0x0007, 0 }, /* R116 - FLL Control 1 */
- { 0x3F77, 0x3F77, 0 }, /* R117 - FLL Control 2 */
- { 0xFFFF, 0xFFFF, 0 }, /* R118 - FLL Control 3 */
- { 0x7FEF, 0x7FEF, 0 }, /* R119 - FLL Control 4 */
- { 0x001B, 0x001B, 0 }, /* R120 - FLL Control 5 */
- { 0x003F, 0x003F, 0 }, /* R121 - GPIO Control 1 */
- { 0x003F, 0x003F, 0 }, /* R122 - GPIO Control 2 */
- { 0x003F, 0x003F, 0 }, /* R123 - GPIO Control 3 */
- { 0x038F, 0x038F, 0 }, /* R124 - GPIO Control 4 */
- { 0x0000, 0x0000, 0 }, /* R125 */
- { 0x00FF, 0x00FF, 0 }, /* R126 - Digital Pulls */
- { 0x07FF, 0x03FF, 1 }, /* R127 - Interrupt Status */
- { 0x03FF, 0x03FF, 0 }, /* R128 - Interrupt Status Mask */
- { 0x03FF, 0x03FF, 0 }, /* R129 - Interrupt Polarity */
- { 0x03FF, 0x03FF, 0 }, /* R130 - Interrupt Debounce */
- { 0x0000, 0x0000, 0 }, /* R131 */
- { 0x0000, 0x0000, 0 }, /* R132 */
- { 0x0000, 0x0000, 0 }, /* R133 */
- { 0x0001, 0x0001, 0 }, /* R134 - EQ1 */
- { 0x001F, 0x001F, 0 }, /* R135 - EQ2 */
- { 0x001F, 0x001F, 0 }, /* R136 - EQ3 */
- { 0x001F, 0x001F, 0 }, /* R137 - EQ4 */
- { 0x001F, 0x001F, 0 }, /* R138 - EQ5 */
- { 0x001F, 0x001F, 0 }, /* R139 - EQ6 */
- { 0xFFFF, 0xFFFF, 0 }, /* R140 - EQ7 */
- { 0xFFFF, 0xFFFF, 0 }, /* R141 - EQ8 */
- { 0xFFFF, 0xFFFF, 0 }, /* R142 - EQ9 */
- { 0xFFFF, 0xFFFF, 0 }, /* R143 - EQ10 */
- { 0xFFFF, 0xFFFF, 0 }, /* R144 - EQ11 */
- { 0xFFFF, 0xFFFF, 0 }, /* R145 - EQ12 */
- { 0xFFFF, 0xFFFF, 0 }, /* R146 - EQ13 */
- { 0xFFFF, 0xFFFF, 0 }, /* R147 - EQ14 */
- { 0xFFFF, 0xFFFF, 0 }, /* R148 - EQ15 */
- { 0xFFFF, 0xFFFF, 0 }, /* R149 - EQ16 */
- { 0xFFFF, 0xFFFF, 0 }, /* R150 - EQ17 */
- { 0xFFFF, 0xFFFF, 0 }, /* R151wm8523_dai - EQ18 */
- { 0xFFFF, 0xFFFF, 0 }, /* R152 - EQ19 */
- { 0xFFFF, 0xFFFF, 0 }, /* R153 - EQ20 */
- { 0xFFFF, 0xFFFF, 0 }, /* R154 - EQ21 */
- { 0xFFFF, 0xFFFF, 0 }, /* R155 - EQ22 */
- { 0xFFFF, 0xFFFF, 0 }, /* R156 - EQ23 */
- { 0xFFFF, 0xFFFF, 0 }, /* R157 - EQ24 */
- { 0x0000, 0x0000, 0 }, /* R158 */
- { 0x0000, 0x0000, 0 }, /* R159 */
- { 0x0000, 0x0000, 0 }, /* R160 */
- { 0x0002, 0x0002, 0 }, /* R161 - Control Interface Test 1 */
- { 0x0000, 0x0000, 0 }, /* R162 */
- { 0x0000, 0x0000, 0 }, /* R163 */
- { 0x0000, 0x0000, 0 }, /* R164 */
- { 0x0000, 0x0000, 0 }, /* R165 */
- { 0x0000, 0x0000, 0 }, /* R166 */
- { 0x0000, 0x0000, 0 }, /* R167 */
- { 0x0000, 0x0000, 0 }, /* R168 */
- { 0x0000, 0x0000, 0 }, /* R169 */
- { 0x0000, 0x0000, 0 }, /* R170 */
- { 0x0000, 0x0000, 0 }, /* R171 */
- { 0x0000, 0x0000, 0 }, /* R172 */
- { 0x0000, 0x0000, 0 }, /* R173 */
- { 0x0000, 0x0000, 0 }, /* R174 */
- { 0x0000, 0x0000, 0 }, /* R175 */
- { 0x0000, 0x0000, 0 }, /* R176 */
- { 0x0000, 0x0000, 0 }, /* R177 */
- { 0x0000, 0x0000, 0 }, /* R178 */
- { 0x0000, 0x0000, 0 }, /* R179 */
- { 0x0000, 0x0000, 0 }, /* R180 */
- { 0x0000, 0x0000, 0 }, /* R181 */
- { 0x0000, 0x0000, 0 }, /* R182 */
- { 0x0000, 0x0000, 0 }, /* R183 */
- { 0x0000, 0x0000, 0 }, /* R184 */
- { 0x0000, 0x0000, 0 }, /* R185 */
- { 0x0000, 0x0000, 0 }, /* R186 */
- { 0x0000, 0x0000, 0 }, /* R187 */
- { 0x0000, 0x0000, 0 }, /* R188 */
- { 0x0000, 0x0000, 0 }, /* R189 */
- { 0x0000, 0x0000, 0 }, /* R190 */
- { 0x0000, 0x0000, 0 }, /* R191 */
- { 0x0000, 0x0000, 0 }, /* R192 */
- { 0x0000, 0x0000, 0 }, /* R193 */
- { 0x0000, 0x0000, 0 }, /* R194 */
- { 0x0000, 0x0000, 0 }, /* R195 */
- { 0x0000, 0x0000, 0 }, /* R196 */
- { 0x0000, 0x0000, 0 }, /* R197 */
- { 0x0000, 0x0000, 0 }, /* R198 */
- { 0x0000, 0x0000, 0 }, /* R199 */
- { 0x0000, 0x0000, 0 }, /* R200 */
- { 0x0000, 0x0000, 0 }, /* R201 */
- { 0x0000, 0x0000, 0 }, /* R202 */
- { 0x0000, 0x0000, 0 }, /* R203 */
- { 0x0070, 0x0070, 0 }, /* R204 - Analogue Output Bias 0 */
- { 0x0000, 0x0000, 0 }, /* R205 */
- { 0x0000, 0x0000, 0 }, /* R206 */
- { 0x0000, 0x0000, 0 }, /* R207 */
- { 0x0000, 0x0000, 0 }, /* R208 */
- { 0x0000, 0x0000, 0 }, /* R209 */
- { 0x0000, 0x0000, 0 }, /* R210 */
- { 0x0000, 0x0000, 0 }, /* R211 */
- { 0x0000, 0x0000, 0 }, /* R212 */
- { 0x0000, 0x0000, 0 }, /* R213 */
- { 0x0000, 0x0000, 0 }, /* R214 */
- { 0x0000, 0x0000, 0 }, /* R215 */
- { 0x0000, 0x0000, 0 }, /* R216 */
- { 0x0000, 0x0000, 0 }, /* R217 */
- { 0x0000, 0x0000, 0 }, /* R218 */
- { 0x0000, 0x0000, 0 }, /* R219 */
- { 0x0000, 0x0000, 0 }, /* R220 */
- { 0x0000, 0x0000, 0 }, /* R221 */
- { 0x0000, 0x0000, 0 }, /* R222 */
- { 0x0000, 0x0000, 0 }, /* R223 */
- { 0x0000, 0x0000, 0 }, /* R224 */
- { 0x0000, 0x0000, 0 }, /* R225 */
- { 0x0000, 0x0000, 0 }, /* R226 */
- { 0x0000, 0x0000, 0 }, /* R227 */
- { 0x0000, 0x0000, 0 }, /* R228 */
- { 0x0000, 0x0000, 0 }, /* R229 */
- { 0x0000, 0x0000, 0 }, /* R230 */
- { 0x0000, 0x0000, 0 }, /* R231 */
- { 0x0000, 0x0000, 0 }, /* R232 */
- { 0x0000, 0x0000, 0 }, /* R233 */
- { 0x0000, 0x0000, 0 }, /* R234 */
- { 0x0000, 0x0000, 0 }, /* R235 */
- { 0x0000, 0x0000, 0 }, /* R236 */
- { 0x0000, 0x0000, 0 }, /* R237 */
- { 0x0000, 0x0000, 0 }, /* R238 */
- { 0x0000, 0x0000, 0 }, /* R239 */
- { 0x0000, 0x0000, 0 }, /* R240 */
- { 0x0000, 0x0000, 0 }, /* R241 */
- { 0x0000, 0x0000, 0 }, /* R242 */
- { 0x0000, 0x0000, 0 }, /* R243 */
- { 0x0000, 0x0000, 0 }, /* R244 */
- { 0x0000, 0x0000, 0 }, /* R245 */
- { 0x0000, 0x0000, 0 }, /* R246 */
- { 0x0001, 0x0001, 0 }, /* R247 - FLL NCO Test 0 */
- { 0x003F, 0x003F, 0 }, /* R248 - FLL NCO Test 1 */
-};
+static bool wm8904_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM8904_SW_RESET_AND_ID:
+ case WM8904_REVISION:
+ case WM8904_DC_SERVO_1:
+ case WM8904_DC_SERVO_6:
+ case WM8904_DC_SERVO_7:
+ case WM8904_DC_SERVO_8:
+ case WM8904_DC_SERVO_9:
+ case WM8904_DC_SERVO_READBACK_0:
+ case WM8904_INTERRUPT_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
-static int wm8904_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
+static bool wm8904_readable_register(struct device *dev, unsigned int reg)
{
- return wm8904_access[reg].vol;
+ switch (reg) {
+ case WM8904_SW_RESET_AND_ID:
+ case WM8904_REVISION:
+ case WM8904_BIAS_CONTROL_0:
+ case WM8904_VMID_CONTROL_0:
+ case WM8904_MIC_BIAS_CONTROL_0:
+ case WM8904_MIC_BIAS_CONTROL_1:
+ case WM8904_ANALOGUE_DAC_0:
+ case WM8904_MIC_FILTER_CONTROL:
+ case WM8904_ANALOGUE_ADC_0:
+ case WM8904_POWER_MANAGEMENT_0:
+ case WM8904_POWER_MANAGEMENT_2:
+ case WM8904_POWER_MANAGEMENT_3:
+ case WM8904_POWER_MANAGEMENT_6:
+ case WM8904_CLOCK_RATES_0:
+ case WM8904_CLOCK_RATES_1:
+ case WM8904_CLOCK_RATES_2:
+ case WM8904_AUDIO_INTERFACE_0:
+ case WM8904_AUDIO_INTERFACE_1:
+ case WM8904_AUDIO_INTERFACE_2:
+ case WM8904_AUDIO_INTERFACE_3:
+ case WM8904_DAC_DIGITAL_VOLUME_LEFT:
+ case WM8904_DAC_DIGITAL_VOLUME_RIGHT:
+ case WM8904_DAC_DIGITAL_0:
+ case WM8904_DAC_DIGITAL_1:
+ case WM8904_ADC_DIGITAL_VOLUME_LEFT:
+ case WM8904_ADC_DIGITAL_VOLUME_RIGHT:
+ case WM8904_ADC_DIGITAL_0:
+ case WM8904_DIGITAL_MICROPHONE_0:
+ case WM8904_DRC_0:
+ case WM8904_DRC_1:
+ case WM8904_DRC_2:
+ case WM8904_DRC_3:
+ case WM8904_ANALOGUE_LEFT_INPUT_0:
+ case WM8904_ANALOGUE_RIGHT_INPUT_0:
+ case WM8904_ANALOGUE_LEFT_INPUT_1:
+ case WM8904_ANALOGUE_RIGHT_INPUT_1:
+ case WM8904_ANALOGUE_OUT1_LEFT:
+ case WM8904_ANALOGUE_OUT1_RIGHT:
+ case WM8904_ANALOGUE_OUT2_LEFT:
+ case WM8904_ANALOGUE_OUT2_RIGHT:
+ case WM8904_ANALOGUE_OUT12_ZC:
+ case WM8904_DC_SERVO_0:
+ case WM8904_DC_SERVO_1:
+ case WM8904_DC_SERVO_2:
+ case WM8904_DC_SERVO_4:
+ case WM8904_DC_SERVO_5:
+ case WM8904_DC_SERVO_6:
+ case WM8904_DC_SERVO_7:
+ case WM8904_DC_SERVO_8:
+ case WM8904_DC_SERVO_9:
+ case WM8904_DC_SERVO_READBACK_0:
+ case WM8904_ANALOGUE_HP_0:
+ case WM8904_ANALOGUE_LINEOUT_0:
+ case WM8904_CHARGE_PUMP_0:
+ case WM8904_CLASS_W_0:
+ case WM8904_WRITE_SEQUENCER_0:
+ case WM8904_WRITE_SEQUENCER_1:
+ case WM8904_WRITE_SEQUENCER_2:
+ case WM8904_WRITE_SEQUENCER_3:
+ case WM8904_WRITE_SEQUENCER_4:
+ case WM8904_FLL_CONTROL_1:
+ case WM8904_FLL_CONTROL_2:
+ case WM8904_FLL_CONTROL_3:
+ case WM8904_FLL_CONTROL_4:
+ case WM8904_FLL_CONTROL_5:
+ case WM8904_GPIO_CONTROL_1:
+ case WM8904_GPIO_CONTROL_2:
+ case WM8904_GPIO_CONTROL_3:
+ case WM8904_GPIO_CONTROL_4:
+ case WM8904_DIGITAL_PULLS:
+ case WM8904_INTERRUPT_STATUS:
+ case WM8904_INTERRUPT_STATUS_MASK:
+ case WM8904_INTERRUPT_POLARITY:
+ case WM8904_INTERRUPT_DEBOUNCE:
+ case WM8904_EQ1:
+ case WM8904_EQ2:
+ case WM8904_EQ3:
+ case WM8904_EQ4:
+ case WM8904_EQ5:
+ case WM8904_EQ6:
+ case WM8904_EQ7:
+ case WM8904_EQ8:
+ case WM8904_EQ9:
+ case WM8904_EQ10:
+ case WM8904_EQ11:
+ case WM8904_EQ12:
+ case WM8904_EQ13:
+ case WM8904_EQ14:
+ case WM8904_EQ15:
+ case WM8904_EQ16:
+ case WM8904_EQ17:
+ case WM8904_EQ18:
+ case WM8904_EQ19:
+ case WM8904_EQ20:
+ case WM8904_EQ21:
+ case WM8904_EQ22:
+ case WM8904_EQ23:
+ case WM8904_EQ24:
+ case WM8904_CONTROL_INTERFACE_TEST_1:
+ case WM8904_ADC_TEST_0:
+ case WM8904_ANALOGUE_OUTPUT_BIAS_0:
+ case WM8904_FLL_NCO_TEST_0:
+ case WM8904_FLL_NCO_TEST_1:
+ return true;
+ default:
+ return true;
+ }
}
static int wm8904_reset(struct snd_soc_codec *codec)
static const struct soc_enum hpf_mode =
SOC_ENUM_SINGLE(WM8904_ADC_DIGITAL_0, 5, 4, hpf_mode_text);
+static int wm8904_adc_osr_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+ int ret;
+
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
+ if (ret < 0)
+ return ret;
+
+ if (ucontrol->value.integer.value[0])
+ val = 0;
+ else
+ val = WM8904_ADC_128_OSR_TST_MODE | WM8904_ADC_BIASX1P5;
+
+ snd_soc_update_bits(codec, WM8904_ADC_TEST_0,
+ WM8904_ADC_128_OSR_TST_MODE | WM8904_ADC_BIASX1P5,
+ val);
+
+ return ret;
+}
+
static const struct snd_kcontrol_new wm8904_adc_snd_controls[] = {
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_DIGITAL_VOLUME_RIGHT, 1, 119, 0, digital_tlv),
SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
SOC_ENUM("High Pass Filter Mode", hpf_mode),
-SOC_SINGLE("ADC 128x OSR Switch", WM8904_ANALOGUE_ADC_0, 0, 1, 0),
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "ADC 128x OSR Switch",
+ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,
+ .put = wm8904_adc_osr_put,
+ .private_value = SOC_SINGLE_VALUE(WM8904_ANALOGUE_ADC_0, 0, 1, 0),
+},
};
static const char *drc_path_text[] = {
switch (wm8904->devtype) {
case WM8904:
- snd_soc_add_controls(codec, wm8904_adc_snd_controls,
+ snd_soc_add_codec_controls(codec, wm8904_adc_snd_controls,
ARRAY_SIZE(wm8904_adc_snd_controls));
- snd_soc_add_controls(codec, wm8904_dac_snd_controls,
+ snd_soc_add_codec_controls(codec, wm8904_dac_snd_controls,
ARRAY_SIZE(wm8904_dac_snd_controls));
- snd_soc_add_controls(codec, wm8904_snd_controls,
+ snd_soc_add_codec_controls(codec, wm8904_snd_controls,
ARRAY_SIZE(wm8904_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8904_adc_dapm_widgets,
break;
case WM8912:
- snd_soc_add_controls(codec, wm8904_dac_snd_controls,
+ snd_soc_add_codec_controls(codec, wm8904_dac_snd_controls,
ARRAY_SIZE(wm8904_dac_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8904_dac_dapm_widgets,
return 0;
}
-static void wm8904_sync_cache(struct snd_soc_codec *codec)
-{
- u16 *reg_cache = codec->reg_cache;
- int i;
-
- if (!codec->cache_sync)
- return;
-
- codec->cache_only = 0;
-
- /* Sync back cached values if they're different from the
- * hardware default.
- */
- for (i = 1; i < codec->driver->reg_cache_size; i++) {
- if (!wm8904_access[i].writable)
- continue;
-
- if (reg_cache[i] == wm8904_reg[i])
- continue;
-
- snd_soc_write(codec, i, reg_cache[i]);
- }
-
- codec->cache_sync = 0;
-}
-
static int wm8904_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
return ret;
}
- wm8904_sync_cache(codec);
+ regcache_sync(wm8904->regmap);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
wm8904->retune_mobile_enum.max = wm8904->num_retune_mobile_texts;
wm8904->retune_mobile_enum.texts = wm8904->retune_mobile_texts;
- ret = snd_soc_add_controls(codec, &control, 1);
+ ret = snd_soc_add_codec_controls(codec, &control, 1);
if (ret != 0)
dev_err(codec->dev,
"Failed to add ReTune Mobile control: %d\n", ret);
int ret, i;
if (!pdata) {
- snd_soc_add_controls(codec, wm8904_eq_controls,
+ snd_soc_add_codec_controls(codec, wm8904_eq_controls,
ARRAY_SIZE(wm8904_eq_controls));
return;
}
wm8904->drc_enum.max = pdata->num_drc_cfgs;
wm8904->drc_enum.texts = wm8904->drc_texts;
- ret = snd_soc_add_controls(codec, &control, 1);
+ ret = snd_soc_add_codec_controls(codec, &control, 1);
if (ret != 0)
dev_err(codec->dev,
"Failed to add DRC mode control: %d\n", ret);
if (pdata->num_retune_mobile_cfgs)
wm8904_handle_retune_mobile_pdata(codec);
else
- snd_soc_add_controls(codec, wm8904_eq_controls,
+ snd_soc_add_codec_controls(codec, wm8904_eq_controls,
ARRAY_SIZE(wm8904_eq_controls));
}
int ret, i;
codec->cache_sync = 1;
- codec->dapm.idle_bias_off = 1;
+ codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
case WM8904:
return -EINVAL;
}
- ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
dev_err(codec->dev, "Failed to read ID register\n");
goto err_enable;
}
- if (ret != wm8904_reg[WM8904_SW_RESET_AND_ID]) {
+ if (ret != 0x8904) {
dev_err(codec->dev, "Device is not a WM8904, ID is %x\n", ret);
ret = -EINVAL;
goto err_enable;
.suspend = wm8904_suspend,
.resume = wm8904_resume,
.set_bias_level = wm8904_set_bias_level,
- .reg_cache_size = ARRAY_SIZE(wm8904_reg),
- .reg_word_size = sizeof(u16),
- .reg_cache_default = wm8904_reg,
- .volatile_register = wm8904_volatile_register,
+ .idle_bias_off = true,
+};
+
+static const struct regmap_config wm8904_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+
+ .max_register = WM8904_MAX_REGISTER,
+ .volatile_reg = wm8904_volatile_register,
+ .readable_reg = wm8904_readable_register,
+
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = wm8904_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm8904_reg_defaults),
};
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8904_priv *wm8904;
int ret;
- wm8904 = kzalloc(sizeof(struct wm8904_priv), GFP_KERNEL);
+ wm8904 = devm_kzalloc(&i2c->dev, sizeof(struct wm8904_priv),
+ GFP_KERNEL);
if (wm8904 == NULL)
return -ENOMEM;
+ wm8904->regmap = regmap_init_i2c(i2c, &wm8904_regmap);
+ if (IS_ERR(wm8904->regmap)) {
+ ret = PTR_ERR(wm8904->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
wm8904->devtype = id->driver_data;
i2c_set_clientdata(i2c, wm8904);
wm8904->pdata = i2c->dev.platform_data;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8904, &wm8904_dai, 1);
- if (ret < 0)
- kfree(wm8904);
+ if (ret != 0)
+ goto err;
+
+ return 0;
+
+err:
+ regmap_exit(wm8904->regmap);
return ret;
}
static __devexit int wm8904_i2c_remove(struct i2c_client *client)
{
+ struct wm8904_priv *wm8904 = i2c_get_clientdata(client);
snd_soc_unregister_codec(&client->dev);
- kfree(i2c_get_clientdata(client));
+ regmap_exit(wm8904->regmap);
return 0;
}
.remove = __devexit_p(wm8904_i2c_remove),
.id_table = wm8904_i2c_id,
};
-#endif
static int __init wm8904_modinit(void)
{
int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&wm8904_i2c_driver);
if (ret != 0) {
printk(KERN_ERR "Failed to register wm8904 I2C driver: %d\n",
ret);
}
-#endif
return ret;
}
module_init(wm8904_modinit);
static void __exit wm8904_exit(void)
{
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8904_i2c_driver);
-#endif
}
module_exit(wm8904_exit);
projects / deliverable / linux.git / blobdiff