new_channel = consumer_allocate_channel(msg.u.channel.channel_key,
-1, -1,
msg.u.channel.mmap_len,
- msg.u.channel.max_sb_size);
+ msg.u.channel.max_sb_size,
+ msg.u.channel.nb_init_streams);
if (new_channel == NULL) {
lttng_consumer_send_error(ctx, LTTCOMM_CONSUMERD_OUTFD_ERROR);
goto end_nosignal;
}
case LTTNG_CONSUMER_ADD_STREAM:
{
- int fd;
+ int fd, stream_pipe;
struct consumer_relayd_sock_pair *relayd = NULL;
struct lttng_consumer_stream *new_stream;
+ int alloc_ret = 0;
/* block */
if (lttng_consumer_poll_socket(consumer_sockpoll) < 0) {
msg.u.stream.uid,
msg.u.stream.gid,
msg.u.stream.net_index,
- msg.u.stream.metadata_flag);
+ msg.u.stream.metadata_flag,
+ msg.u.stream.session_id,
+ &alloc_ret);
if (new_stream == NULL) {
- lttng_consumer_send_error(ctx, LTTCOMM_CONSUMERD_OUTFD_ERROR);
+ switch (alloc_ret) {
+ case -ENOMEM:
+ case -EINVAL:
+ default:
+ lttng_consumer_send_error(ctx, LTTCOMM_CONSUMERD_OUTFD_ERROR);
+ break;
+ case -ENOENT:
+ /*
+ * We could not find the channel. Can happen if cpu hotplug
+ * happens while tearing down.
+ */
+ DBG3("Could not find channel");
+ break;
+ }
goto end_nosignal;
}
&new_stream->relayd_stream_id);
pthread_mutex_unlock(&relayd->ctrl_sock_mutex);
if (ret < 0) {
+ consumer_del_stream(new_stream, NULL);
goto end_nosignal;
}
} else if (msg.u.stream.net_index != -1) {
ERR("Network sequence index %d unknown. Not adding stream.",
msg.u.stream.net_index);
- free(new_stream);
+ consumer_del_stream(new_stream, NULL);
goto end_nosignal;
}
- /* Send stream to the metadata thread */
- if (new_stream->metadata_flag) {
- if (ctx->on_recv_stream) {
- ret = ctx->on_recv_stream(new_stream);
- if (ret < 0) {
- goto end_nosignal;
- }
- }
-
- do {
- ret = write(ctx->consumer_metadata_pipe[1], new_stream,
- sizeof(struct lttng_consumer_stream));
- } while (ret < 0 && errno == EINTR);
+ if (ctx->on_recv_stream) {
+ ret = ctx->on_recv_stream(new_stream);
if (ret < 0) {
- PERROR("write metadata pipe");
+ consumer_del_stream(new_stream, NULL);
+ goto end_nosignal;
}
+ }
+
+ /* Get the right pipe where the stream will be sent. */
+ if (new_stream->metadata_flag) {
+ stream_pipe = ctx->consumer_metadata_pipe[1];
} else {
- if (ctx->on_recv_stream) {
- ret = ctx->on_recv_stream(new_stream);
- if (ret < 0) {
- goto end_nosignal;
- }
- }
- consumer_add_stream(new_stream);
+ stream_pipe = ctx->consumer_data_pipe[1];
+ }
+
+ do {
+ ret = write(stream_pipe, &new_stream, sizeof(new_stream));
+ } while (ret < 0 && errno == EINTR);
+ if (ret < 0) {
+ PERROR("Consumer write %s stream to pipe %d",
+ new_stream->metadata_flag ? "metadata" : "data",
+ stream_pipe);
+ consumer_del_stream(new_stream, NULL);
+ goto end_nosignal;
}
- DBG("Kernel consumer_add_stream (%d)", fd);
+ DBG("Kernel consumer ADD_STREAM %s (fd: %d) with relayd id %" PRIu64,
+ msg.u.stream.path_name, fd, new_stream->relayd_stream_id);
break;
}
case LTTNG_CONSUMER_UPDATE_STREAM:
goto end_nosignal;
}
+ case LTTNG_CONSUMER_DATA_AVAILABLE:
+ {
+ int32_t ret;
+ uint64_t id = msg.u.data_available.session_id;
+
+ DBG("Kernel consumer data available command for id %" PRIu64, id);
+
+ ret = consumer_data_available(id);
+
+ /* Send back returned value to session daemon */
+ ret = lttcomm_send_unix_sock(sock, &ret, sizeof(ret));
+ if (ret < 0) {
+ PERROR("send data available ret code");
+ }
+ break;
+ }
default:
goto end_nosignal;
}
- /*
- * Wake-up the other end by writing a null byte in the pipe (non-blocking).
- * Important note: Because writing into the pipe is non-blocking (and
- * therefore we allow dropping wakeup data, as long as there is wakeup data
- * present in the pipe buffer to wake up the other end), the other end
- * should perform the following sequence for waiting:
- *
- * 1) empty the pipe (reads).
- * 2) perform update operation.
- * 3) wait on the pipe (poll).
- */
- do {
- ret = write(ctx->consumer_poll_pipe[1], "", 1);
- } while (ret < 0 && errno == EINTR);
end_nosignal:
rcu_read_unlock();
padding = 0;
/* splice the subbuffer to the tracefile */
- ret = lttng_consumer_on_read_subbuffer_splice(ctx, stream,
- subbuf_size, padding);
+ ret = lttng_consumer_on_read_subbuffer_splice(ctx, stream, subbuf_size,
+ padding);
+ /*
+ * XXX: Splice does not support network streaming so the return value
+ * is simply checked against subbuf_size and not like the mmap() op.
+ */
if (ret != subbuf_size) {
/*
* display the error but continue processing to try
padding = len - subbuf_size;
/* write the subbuffer to the tracefile */
- ret = lttng_consumer_on_read_subbuffer_mmap(ctx, stream,
- subbuf_size, padding);
- if (ret != subbuf_size) {
+ ret = lttng_consumer_on_read_subbuffer_mmap(ctx, stream, subbuf_size,
+ padding);
+ /*
+ * The mmap operation should write subbuf_size amount of data when
+ * network streaming or the full padding (len) size when we are _not_
+ * streaming.
+ */
+ if ((ret != subbuf_size && stream->net_seq_idx != -1) ||
+ (ret != len && stream->net_seq_idx == -1)) {
/*
- * display the error but continue processing to try
- * to release the subbuffer
+ * Display the error but continue processing to try to release the
+ * subbuffer
*/
- ERR("Error writing to tracefile (ret: %zd != len: %lu",
- ret, subbuf_size);
+ ERR("Error writing to tracefile "
+ "(ret: %zd != len: %lu != subbuf_size: %lu)",
+ ret, len, subbuf_size);
}
break;
default:
return ret;
}
+/*
+ * Check if data is still being extracted from the buffers for a specific
+ * stream. Consumer data lock MUST be acquired before calling this function.
+ *
+ * Return 0 if the traced data are still getting read else 1 meaning that the
+ * data is available for trace viewer reading.
+ */
+int lttng_kconsumer_data_available(struct lttng_consumer_stream *stream)
+{
+ int ret;
+
+ assert(stream);
+
+ /*
+ * Try to lock the stream mutex. On failure, we know that the stream is
+ * being used else where hence there is data still being extracted.
+ */
+ ret = pthread_mutex_trylock(&stream->lock);
+ if (ret == EBUSY) {
+ goto data_not_available;
+ }
+ /* The stream is now locked so we can do our ustctl calls */
+
+ ret = kernctl_get_next_subbuf(stream->wait_fd);
+ if (ret == 0) {
+ /* There is still data so let's put back this subbuffer. */
+ ret = kernctl_put_subbuf(stream->wait_fd);
+ assert(ret == 0);
+ pthread_mutex_unlock(&stream->lock);
+ goto data_not_available;
+ }
+
+ /* Data is available to be read for this stream. */
+ pthread_mutex_unlock(&stream->lock);
+ return 1;
+
+data_not_available:
+ return 0;
+}