#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# This Makefile contains release scripts for gdb, binutils, and other
BZIPPROG = bzip2
MD5PROG = md5sum
+# (Default to avoid splitting info files by setting the threshold high.)
+MAKEINFOFLAGS = --split-size=5000000
+
# pwd command to use. Allow user to override default by setting PWDCMD in
# the environment to account for automounters. The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# Support for building net releases
# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
+DEVO_SUPPORT= README Makefile.in configure configure.ac \
config.guess config.sub config move-if-change \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \
- Makefile.def Makefile.tpl src-release
+ mkinstalldirs ltmain.sh missing ylwrap \
+ libtool.m4 ltsugar.m4 ltversion.m4 ltoptions.m4 \
+ Makefile.def Makefile.tpl src-release config.rpath \
+ ChangeLog MAINTAINERS README-maintainer-mode \
+ lt~obsolete.m4 ltgcc.m4 depcomp mkdep compile \
+ COPYING3 COPYING3.LIB
# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
make-stds.texi standards.info* configure.texi configure.info* \
- configbuild.* configdev.* fdl.texi texi2pod.pl
+ ChangeLog configbuild.* configdev.* fdl.texi texi2pod.pl gnu-oids.texi
# When you use `make setup-dirs' or `make taz' you should always redefine
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ bfd/configure --version | sed -n -e '1s,.* ,,p'; \
elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif test -f $(TOOL)/common/create-version.sh; then \
+ $(TOOL)/common/create-version.sh $(TOOL) \
+ 'dummy-host' 'dummy-target' \
+ VER.tmp; \
+ cat VER.tmp | grep 'version\[\]' | sed 's/.*"\([^"]*\)".*/\1/' | sed 's/-cvs$$//'; \
+ rm -f VER.tmp; \
elif test -f $(TOOL)/version.in; then \
head -1 $(TOOL)/version.in; \
elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+ set -e ; dirs="$(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
if [ ! -f $$d/Makefile ] ; then true ; \
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ (cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
+ diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ (cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
+ info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
+ else \
+ if (echo x$$d | grep / >/dev/null); then \
+ mkdir -p proto-toplev/`dirname $$d` ; \
+ x=`dirname $$d` ; \
+ ln -s ../`echo $$x/ | sed -e 's,[^/]*/,../,g'`$$d proto-toplev/$$d ; \
+ else \
+ ln -s ../$$d proto-toplev/$$d ; \
+ fi ; \
+ fi ; \
done
- cd etc && $(MAKE) info
+ cd etc && $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" info
$(MAKE) distclean
# Kludge for pr gdb/857. intl/Makefile.in lacks a couple
# of files in the distclean rule. Zack W is planning to make
done)
#
# Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
+ rm proto-toplev/configure.ac
sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
+ <configure.ac >proto-toplev/configure.ac
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep cpu
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld elfcpp gold gprof intl setup.com makefile.vms cpu
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f $(SELF) taz TOOL=binutils \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim
+GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber cpu
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+# Corresponding to the CVS "sim" module.
+.PHONY: sim.tar.bz2
+SIM_SUPPORT_DIRS= bfd opcodes libiberty include intl gdb/version.in makefile.vms
+sim.tar.bz2: $(DIST_SUPPORT) $(SIM_SUPPORT_DIRS) sim
+ $(MAKE) -f $(SELF) taz TOOL=sim \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SIM_SUPPORT_DIRS)"
+
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
projects / deliverable / binutils-gdb.git / blobdiff