-# Copyright (C) - 2012 David Goulet <dgoulet@efficios.com>
+# Copyright (C) 2012 David Goulet <dgoulet@efficios.com>
#
-# This library is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Lesser General Public License as published by the Free
-# Software Foundation; version 2.1 of the License.
+# SPDX-License-Identifier: LGPL-2.1-only
#
-# This library is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this library; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
SESSIOND_BIN="lttng-sessiond"
SESSIOND_MATCH=".*lttng-sess.*"
source $TESTDIR/utils/tap/tap.sh
-if [ -z $LTTNG_TEST_TEARDOWN_TIMEOUT ]; then
+if [ -z ${LTTNG_TEST_TEARDOWN_TIMEOUT+x} ]; then
LTTNG_TEST_TEARDOWN_TIMEOUT=60
fi
-function full_cleanup ()
+# Enable job monitor mode.
+# Here we are mostly interested in the following from the monitor mode:
+# All processes run in a separate process group.
+# This allows us to ensure that all subprocesses from all background tasks are
+# cleaned up correctly using signal to process group id.
+set -m
+
+kill_background_jobs ()
+{
+ local pids
+ pids=$(jobs -p)
+
+ if [ -z "$pids" ]; then
+ # Empty
+ return 0
+ fi
+
+ while read -r pid;
+ do
+ # Use negative number to send the signal to the process group.
+ # This ensure that any subprocesses receive the signal.
+ # /dev/null is used since there is an acceptable race between
+ # the moments the pids are listed and the moment we send a
+ # signal.
+ kill -SIGTERM -- "-$pid" 2>/dev/null
+ done <<< "$pids"
+}
+
+function cleanup ()
{
# Try to kill daemons gracefully
- stop_lttng_relayd_notap SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_sessiond_notap SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_relayd_cleanup SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_sessiond_cleanup SIGTERM $LTTNG_TEST_TEARDOWN_TIMEOUT
# If daemons are still present, forcibly kill them
- stop_lttng_relayd_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_sessiond_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
- stop_lttng_consumerd_notap SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_relayd_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_sessiond_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
+ stop_lttng_consumerd_cleanup SIGKILL $LTTNG_TEST_TEARDOWN_TIMEOUT
- # Disable trap for SIGTERM since the following kill to the
- # pidgroup will be SIGTERM. Otherwise it loops.
- # The '-' before the pid number ($$) indicates 'kill' to signal the
- # whole process group.
- trap - SIGTERM && kill -- -$$
+ kill_background_jobs
}
+function full_cleanup ()
+{
+ cleanup
+ exit 1
+}
+
+function LTTNG_BAIL_OUT ()
+{
+ cleanup
+ BAIL_OUT "$@"
+}
+
+function null_pipes ()
+{
+ exec 0>/dev/null
+ exec 1>/dev/null
+ exec 2>/dev/null
+}
trap full_cleanup SIGINT SIGTERM
+# perl prove closes its child pipes before giving it a chance to run its
+# signal trap handlers. Redirect pipes to /dev/null if SIGPIPE is caught
+# to allow those trap handlers to proceed.
+
+trap null_pipes SIGPIPE
+
+# Check pgrep from env, default to pgrep if none
+if [ -z "$PGREP" ]; then
+ PGREP=pgrep
+fi
+
+# Due to the renaming of threads we need to use the full command (pgrep -f) to
+# identify the pids for multiple lttng related processes. The problem with "pgrep
+# -f" is that it ends up also looking at the arguments. We use a two stage
+# lookup. The first one is using "pgrep -f" yielding potential candidate.
+# The second on perform grep on the basename of the first field of the
+# /proc/pid/cmdline of the previously identified pids. The first field
+# correspond to the actual command.
+function lttng_pgrep ()
+{
+ local pattern=$1
+ local possible_pids
+ local full_command_no_argument
+ local command_basename
+
+ possible_pids=$($PGREP -f "$pattern")
+ if [ -z "$possible_pids" ]; then
+ return 0
+ fi
+
+ while IFS= read -r pid ; do
+ # /proc/pid/cmdline is null separated.
+ if full_command_no_argument=$(cut -d '' -f 1 2>/dev/null < /proc/"$pid"/cmdline); then
+ command_basename=$(basename "$full_command_no_argument")
+ if grep -q "$pattern" <<< "$command_basename"; then
+ echo "$pid"
+ fi
+ fi
+ done <<< "$possible_pids"
+ return 0
+}
+
function print_ok ()
{
# Check if we are a terminal
# Bail out on failure
function validate_lttng_modules_present ()
{
+ # Check for loadable modules.
modprobe -n lttng-tracer 2>/dev/null
- if [ $? -ne 0 ]; then
- BAIL_OUT "LTTng modules not detected."
+ if [ $? -eq 0 ]; then
+ return 0
+ fi
+
+ # Check for builtin modules.
+ ls /proc/lttng > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ return 0
fi
+
+ LTTNG_BAIL_OUT "LTTng modules not detected."
}
function enable_kernel_lttng_event
lttng_disable_kernel_syscall 1 "$@"
}
+function lttng_enable_kernel_function_event ()
+{
+ local expected_to_fail="$1"
+ local sess_name="$2"
+ local target="$3"
+ local event_name="$4"
+
+ "$TESTDIR/../src/bin/lttng/$LTTNG_BIN" enable-event --kernel --function="$target" "$event_name" -s "$sess_name" > "$OUTPUT_DEST" 2> "$ERROR_OUTPUT_DEST"
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test $ret -ne "0"
+ ok $? "Enable kernel function event for session $sess_name failed as expected"
+ else
+ ok $ret "Enable kernel function event for session $sess_name"
+ fi
+}
+
+function lttng_enable_kernel_function_event_ok ()
+{
+ lttng_enable_kernel_function_event 0 "$@"
+}
+
function lttng_enable_kernel_userspace_probe_event ()
{
local expected_to_fail="$1"
local expected_to_fail=$2
local sess_name=$3
local channel_name=$4
- local opt=$5
+ local opts="${@:5}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -k $channel_name -s $sess_name $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -k $channel_name -s $sess_name $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
function start_lttng_relayd_opt()
{
local withtap=$1
- local opt=$2
+ local process_mode=$2
+ local opt=$3
DIR=$(readlink -f "$TESTDIR")
- if [ -z "$(pgrep "$RELAYD_MATCH")" ]; then
+ if [ -z $(lttng_pgrep "$RELAYD_MATCH") ]; then
# shellcheck disable=SC2086
- "$DIR/../src/bin/lttng-relayd/$RELAYD_BIN" -b $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
- #"$DIR/../src/bin/lttng-relayd/$RELAYD_BIN" $opt -vvv >>/tmp/relayd.log 2>&1 &
+ $DIR/../src/bin/lttng-relayd/$RELAYD_BIN $process_mode $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ #$DIR/../src/bin/lttng-relayd/$RELAYD_BIN $opt -vvv >>/tmp/relayd.log 2>&1 &
if [ $? -eq 1 ]; then
- if [ "$withtap" -eq "1" ]; then
- fail "Start lttng-relayd (opt: $opt)"
+ if [ $withtap -eq "1" ]; then
+ fail "Start lttng-relayd (process mode: $process_mode opt: $opt)"
fi
return 1
else
- if [ "$withtap" -eq "1" ]; then
- pass "Start lttng-relayd (opt: $opt)"
+ if [ $withtap -eq "1" ]; then
+ pass "Start lttng-relayd (process mode: $process_mode opt: $opt)"
fi
fi
else
function start_lttng_relayd()
{
- start_lttng_relayd_opt 1 "$@"
+ start_lttng_relayd_opt 1 "-b" "$@"
}
function start_lttng_relayd_notap()
{
- start_lttng_relayd_opt 0 "$@"
+ start_lttng_relayd_opt 0 "-b" "$@"
}
function stop_lttng_relayd_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local pids
if [ -z "$signal" ]; then
signal="SIGTERM"
fi
- local timeout_s=$3
- local dtimeleft_s=
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
fi
- local retval=0
- local pids=
- pids=$(pgrep "$RELAYD_MATCH")
+ pids=$(lttng_pgrep "$RELAYD_MATCH")
if [ -z "$pids" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No relay daemon to kill"
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No relay daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No relay daemon to kill"
fi
return 0
fi
else
out=1
while [ -n "$out" ]; do
- out=$(pgrep "$RELAYD_MATCH")
+ out=$(lttng_pgrep "$RELAYD_MATCH")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
function stop_lttng_relayd()
{
- stop_lttng_relayd_opt 1 "$@"
+ stop_lttng_relayd_opt 1 0 "$@"
}
function stop_lttng_relayd_notap()
{
- stop_lttng_relayd_opt 0 "$@"
+ stop_lttng_relayd_opt 0 0 "$@"
+}
+
+function stop_lttng_relayd_cleanup()
+{
+ stop_lttng_relayd_opt 0 1 "$@"
}
#First arg: show tap output
local withtap=$1
local load_path=$2
+ # The rest of the arguments will be passed directly to lttng-sessiond.
+ shift 2
+
local env_vars=""
local consumerd=""
if ! validate_kernel_version; then
fail "Start session daemon"
- BAIL_OUT "*** Kernel too old for session daemon tests ***"
+ LTTNG_BAIL_OUT "*** Kernel too old for session daemon tests ***"
fi
: "${LTTNG_SESSION_CONFIG_XSD_PATH="${DIR}/../src/common/config/"}"
export LTTNG_SESSION_CONFIG_XSD_PATH
- if [ -z "$(pgrep "${SESSIOND_MATCH}")" ]; then
+ if [ -z "$(lttng_pgrep "${SESSIOND_MATCH}")" ]; then
# Have a load path ?
if [ -n "$load_path" ]; then
# shellcheck disable=SC2086
- env $env_vars --load "$load_path" --background "$consumerd"
+ env $env_vars --load "$load_path" --background "$consumerd" "$@"
else
# shellcheck disable=SC2086
- env $env_vars --background "$consumerd"
+ env $env_vars --background "$consumerd" "$@"
fi
#$DIR/../src/bin/lttng-sessiond/$SESSIOND_BIN --background --consumerd32-path="$DIR/../src/bin/lttng-consumerd/lttng-consumerd" --consumerd64-path="$DIR/../src/bin/lttng-consumerd/lttng-consumerd" --verbose-consumer >>/tmp/sessiond.log 2>&1
status=$?
function stop_lttng_sessiond_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local runas_pids
+ local pids
if [ -z "$signal" ]; then
signal=SIGTERM
fi
- local timeout_s=$3
- local dtimeleft_s=
-
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
return 0
fi
- local retval=0
-
- local runas_pids=
- runas_pids=$(pgrep "$RUNAS_MATCH")
-
- local pids=
- pids=$(pgrep "$SESSIOND_MATCH")
+ runas_pids=$(lttng_pgrep "$RUNAS_MATCH")
+ pids=$(lttng_pgrep "$SESSIOND_MATCH")
if [ -n "$runas_pids" ]; then
pids="$pids $runas_pids"
fi
if [ -z "$pids" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No session daemon to kill"
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No session daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No session daemon to kill"
fi
return 0
fi
else
out=1
while [ -n "$out" ]; do
- out=$(pgrep "${SESSIOND_MATCH}")
+ out=$(lttng_pgrep "${SESSIOND_MATCH}")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
done
out=1
while [ -n "$out" ]; do
- out=$(pgrep "$CONSUMERD_MATCH")
+ out=$(lttng_pgrep "$CONSUMERD_MATCH")
if [ -n "$dtimeleft_s" ]; then
if [ $dtimeleft_s -lt 0 ]; then
out=
if [ -n "$modules" ]; then
diag "Unloading all LTTng modules"
- modprobe -r "$modules"
+ modprobe --remove "$modules"
fi
fi
fi
function stop_lttng_sessiond()
{
- stop_lttng_sessiond_opt 1 "$@"
+ stop_lttng_sessiond_opt 1 0 "$@"
}
function stop_lttng_sessiond_notap()
{
- stop_lttng_sessiond_opt 0 "$@"
+ stop_lttng_sessiond_opt 0 0 "$@"
+}
+
+function stop_lttng_sessiond_cleanup()
+{
+ stop_lttng_sessiond_opt 0 1 "$@"
}
function sigstop_lttng_sessiond_opt()
{
local withtap=$1
local signal=SIGSTOP
+ local pids
if [ -n "$TEST_NO_SESSIOND" ] && [ "$TEST_NO_SESSIOND" == "1" ]; then
# Env variable requested no session daemon
return
fi
- PID_SESSIOND="$(pgrep "${SESSIOND_MATCH}") $(pgrep "$RUNAS_MATCH")"
+ pids="$(lttng_pgrep "${SESSIOND_MATCH}") $(lttng_pgrep "$RUNAS_MATCH")"
if [ "$withtap" -eq "1" ]; then
- diag "Sending SIGSTOP to lt-$SESSIOND_BIN and $SESSIOND_BIN pids: $(echo "$PID_SESSIOND" | tr '\n' ' ')"
+ diag "Sending SIGSTOP to lt-$SESSIOND_BIN and $SESSIOND_BIN pids: $(echo "$pids" | tr '\n' ' ')"
fi
# shellcheck disable=SC2086
- if ! kill -s $signal $PID_SESSIOND 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
+ if ! kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
if [ "$withtap" -eq "1" ]; then
fail "Sending SIGSTOP to session daemon"
fi
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$SESSIOND_MATCH")"
+ pids="$(lttng_pgrep "$SESSIOND_MATCH")"
# Wait until state becomes stopped for session
# daemon(s).
out=0
- for sessiond_pid in $pid; do
+ for sessiond_pid in $pids; do
state="$(ps -p "$sessiond_pid" -o state= )"
if [[ -n "$state" && "$state" != "T" ]]; then
out=1
function stop_lttng_consumerd_opt()
{
local withtap=$1
- local signal=$2
+ local is_cleanup=$2
+ local signal=$3
+ local timeout_s=$4
+ local dtimeleft_s=
+ local retval=0
+ local pids
if [ -z "$signal" ]; then
signal=SIGTERM
fi
- local timeout_s=$3
- local dtimeleft_s=
-
# Multiply time by 2 to simplify integer arithmetic
if [ -n "$timeout_s" ]; then
dtimeleft_s=$((timeout_s * 2))
fi
- local retval=0
-
- PID_CONSUMERD="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
- if [ -z "$PID_CONSUMERD" ]; then
- if [ "$withtap" -eq "1" ]; then
- pass "No consumer daemon to kill"
+ if [ -z "$pids" ]; then
+ if [ "$is_cleanup" -eq 1 ]; then
+ :
+ elif [ "$withtap" -eq "1" ]; then
+ fail "No consumerd daemon to kill"
+ else
+ LTTNG_BAIL_OUT "No consumerd daemon to kill"
fi
return 0
fi
- diag "Killing (signal $signal) $CONSUMERD_BIN pids: $(echo "$PID_CONSUMERD" | tr '\n' ' ')"
+ diag "Killing (signal $signal) $CONSUMERD_BIN pids: $(echo "$pids" | tr '\n' ' ')"
# shellcheck disable=SC2086
- if ! kill -s $signal $PID_CONSUMERD 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
+ if ! kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST; then
retval=1
if [ "$withtap" -eq "1" ]; then
fail "Kill consumer daemon"
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
# If consumerds are still present check their status.
# A zombie status qualifies the consumerd as *killed*
out=0
- for consumer_pid in $pid; do
+ for consumer_pid in $pids; do
state="$(ps -p "$consumer_pid" -o state= )"
if [[ -n "$state" && "$state" != "Z" ]]; then
out=1
function stop_lttng_consumerd()
{
- stop_lttng_consumerd_opt 1 "$@"
+ stop_lttng_consumerd_opt 1 0 "$@"
}
function stop_lttng_consumerd_notap()
{
- stop_lttng_consumerd_opt 0 "$@"
+ stop_lttng_consumerd_opt 0 0 "$@"
+}
+
+function stop_lttng_consumerd_cleanup()
+{
+ stop_lttng_consumerd_opt 0 1 "$@"
}
function sigstop_lttng_consumerd_opt()
{
local withtap=$1
local signal=SIGSTOP
+ local pids
- PID_CONSUMERD="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
- diag "Sending SIGSTOP to $CONSUMERD_BIN pids: $(echo "$PID_CONSUMERD" | tr '\n' ' ')"
+ diag "Sending SIGSTOP to $CONSUMERD_BIN pids: $(echo "$pids" | tr '\n' ' ')"
# shellcheck disable=SC2086
- kill -s $signal $PID_CONSUMERD 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ kill -s $signal $pids 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
retval=$?
if [ $retval -eq 1 ]; then
else
out=1
while [ $out -ne 0 ]; do
- pid="$(pgrep "$CONSUMERD_MATCH")"
+ pids="$(lttng_pgrep "$CONSUMERD_MATCH")"
# Wait until state becomes stopped for all
# consumers.
out=0
- for consumer_pid in $pid; do
+ for consumer_pid in $pids; do
state="$(ps -p "$consumer_pid" -o state= )"
if [[ -n "$state" && "$state" != "T" ]]; then
out=1
local trace_path=$4
local opt=$5
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN create $sess_name -o $trace_path $opt > $OUTPUT_DEST
+ if [ -z "$trace_path" ]; then
+ # Use lttng-sessiond default output.
+ trace_path=""
+ else
+ trace_path="-o $trace_path"
+ fi
+
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN create "$sess_name" $trace_path $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ret=$?
if [ $expected_to_fail -eq "1" ]; then
test "$ret" -ne "0"
local expected_to_fail=$2
local sess_name=$3
local channel_name=$4
- local opt=$5
+ local opts="${@:5}"
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -u $channel_name -s $sess_name $opt 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-channel -u $channel_name -s $sess_name $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
test "$ret" -ne "0"
local sess_name="$1"
local event_name="$2"
local filter="$3"
+ local channel_name=$4
+
+ if [ -z $channel_name ]; then
+ # default channel if none specified
+ chan=""
+ else
+ chan="-c $channel_name"
+ fi
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event "$event_name" -s $sess_name -u --filter "$filter" 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN enable-event $chan "$event_name" -s $sess_name -u --filter "$filter" 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ok $? "Enable event $event_name with filtering for session $sess_name"
}
local expected_to_fail=$1
local sess_name=$2
local trace_path=$3
+ local opts=$4
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot add-output -s $sess_name $trace_path 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot add-output -s $sess_name $trace_path $opts 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ret=$?
if [[ $expected_to_fail -eq 1 ]]; then
test "$ret" -ne "0"
- ok $? "Added snapshot output file://$trace_path failed as expected"
+ ok $? "Added snapshot output $trace_path failed as expected"
else
- ok $ret "Added snapshot output file://$trace_path"
+ ok $ret "Added snapshot output $trace_path"
fi
}
local sess_name=$1
local trace_path=$2
- $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot record -s $sess_name $trace_path 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN snapshot record -s "$sess_name" "$trace_path" 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
ok $? "Snapshot recorded"
}
function lttng_track()
{
- local expected_to_fail=$1
- local opts=$2
+ local expected_to_fail="$1"
+ shift 1
+ local opts="$@"
$TESTDIR/../src/bin/lttng/$LTTNG_BIN track $opts >$OUTPUT_DEST
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
function lttng_untrack()
{
- local expected_to_fail=$1
- local opts=$2
+ local expected_to_fail="$1"
+ shift 1
+ local opts="$@"
$TESTDIR/../src/bin/lttng/$LTTNG_BIN untrack $opts >$OUTPUT_DEST
ret=$?
if [[ $expected_to_fail -eq "1" ]]; then
ok $? "Lttng untrack all pid on the kernel domain"
}
+function lttng_track_ust_ok()
+{
+ lttng_track_ok -u "$@"
+}
+
+function lttng_track_ust_fail()
+{
+ lttng_track_fail -u "$@"
+}
+
+function lttng_track_kernel_ok()
+{
+ lttng_track_ok -k "$@"
+}
+
+function lttng_track_kernel_fail()
+{
+ lttng_track_fail -k "$@"
+}
+
+function lttng_untrack_ust_ok()
+{
+ lttng_untrack_ok -u "$@"
+}
+
+function lttng_untrack_ust_fail()
+{
+ lttng_untrack_fail -u "$@"
+}
+
+function lttng_untrack_kernel_ok()
+{
+ lttng_untrack_ok -k "$@"
+}
+
+function lttng_untrack_kernel_fail()
+{
+ lttng_untrack_fail -k "$@"
+}
+
function lttng_add_context_list()
{
$TESTDIR/../src/bin/lttng/$LTTNG_BIN add-context --list 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
add_context_lttng 1 -k "$@"
}
+function wait_live_trace_ready ()
+{
+ local url=$1
+ local zero_client_match=0
+
+ diag "Waiting for live trace at url: $url"
+ while [ $zero_client_match -eq 0 ]; do
+ zero_client_match=$($BABELTRACE_BIN -i lttng-live $url | grep "0 client(s) connected" | wc -l)
+ sleep 0.5
+ done
+ pass "Waiting for live trace at url: $url"
+}
+
+function wait_live_viewer_connect ()
+{
+ local url=$1
+ local one_client_match=0
+
+ diag "Waiting for live viewers on url: $url"
+ while [ $one_client_match -eq 0 ]; do
+ one_client_match=$($BABELTRACE_BIN -i lttng-live $url | grep "1 client(s) connected" | wc -l)
+ sleep 0.5
+ done
+ pass "Waiting for live viewers on url: $url"
+}
+
function validate_metadata_event ()
{
local event_name=$1
ok $? "Read a total of $cnt events, expected $expected_count"
}
+function validate_trace_count_range_incl_min_excl_max
+{
+ local event_name=$1
+ local trace_path=$2
+ local expected_min=$3
+ local expected_max=$4
+
+ which $BABELTRACE_BIN >/dev/null
+ if [ $? -ne 0 ]; then
+ skip 0 "Babeltrace binary not found. Skipping trace validation"
+ fi
+
+ cnt=0
+ OLDIFS=$IFS
+ IFS=","
+ for i in $event_name; do
+ traced=$($BABELTRACE_BIN $trace_path 2>/dev/null | grep $i | wc -l)
+ if [ "$traced" -ge $expected_min ]; then
+ pass "Validate trace for event $i, $traced events"
+ else
+ fail "Validate trace for event $i"
+ diag "Found $traced occurences of $i"
+ fi
+ cnt=$(($cnt + $traced))
+ done
+ IFS=$OLDIFS
+ test $cnt -lt $expected_max
+ ok $? "Read a total of $cnt events, expected between [$expected_min, $expected_max["
+}
+
function trace_first_line
{
local trace_path=$1
return $ret
}
+function validate_directory_empty ()
+{
+ local trace_path="$1"
+
+ # Do not double quote `$trace_path` below as we want wildcards to be
+ # expanded.
+ files="$(ls -A $trace_path)"
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ fail "Failed to list content of directory \"$trace_path\""
+ return $ret
+ fi
+
+ nb_files="$(echo -n "$files" | wc -l)"
+ ok $nb_files "Directory \"$trace_path\" is empty"
+}
+
+function validate_trace_session_ust_empty()
+{
+ validate_directory_empty "$1"/ust
+}
+
+function validate_trace_session_kernel_empty()
+{
+ validate_trace_empty "$1"/kernel
+}
+
function regenerate_metadata ()
{
local expected_to_fail=$1
test "$ret" -ne "0"
ok $? "Expected fail on regenerate statedump $sess_name"
else
- ok $ret "Metadata regenerate $sess_name"
+ ok $ret "Statedump regenerate $sess_name"
fi
}
{
lttng_enable_rotation_size 1 $@
}
+
+function lttng_clear_session ()
+{
+ local expected_to_fail=$1
+ local sess_name=$2
+
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN clear $sess_name 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test "$ret" -ne "0"
+ ok $? "Expected fail on clear session $sess_name"
+ else
+ ok $ret "Clear session $sess_name"
+ fi
+}
+
+function lttng_clear_session_ok ()
+{
+ lttng_clear_session 0 $@
+}
+
+function lttng_clear_session_fail ()
+{
+ lttng_clear_session 1 $@
+}
+
+function lttng_clear_all ()
+{
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN clear --all 1> $OUTPUT_DEST 2> $ERROR_OUTPUT_DEST
+ ok $? "Clear all lttng sessions"
+}
+
+function lttng_add_trigger()
+{
+ local expected_to_fail="$1"
+ local trigger_name="$2"
+ shift 2
+
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN add-trigger --id "$trigger_name" "$@" 1> /dev/null 2> /dev/null
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test "$ret" -ne "0"
+ ok $? "Add trigger $trigger_name failed as expected"
+ else
+ ok $ret "Add trigger $trigger_name"
+ fi
+}
+
+function lttng_remove_trigger()
+{
+ local expected_to_fail="$1"
+ local trigger_name="$2"
+
+ $TESTDIR/../src/bin/lttng/$LTTNG_BIN remove-trigger "$trigger_name" 1> /dev/null 2> /dev/null
+ ret=$?
+ if [[ $expected_to_fail -eq "1" ]]; then
+ test "$ret" -ne "0"
+ ok $? "Remove trigger $trigger_name failed as expected"
+ else
+ ok $ret "Remove trigger $trigger_name"
+ fi
+}
+
+function lttng_add_trigger_ok()
+{
+ lttng_add_trigger 0 "$@"
+}
+
+function lttng_add_trigger_fail()
+{
+ lttng_add_trigger 1 "$@"
+}
+
+function lttng_remove_trigger_ok()
+{
+ lttng_remove_trigger 0 "$@"
+}