X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;ds=sidebyside;f=configure.in;h=5735d84c8b4ab4850c88e350b5099b874b30f5ed;hb=2de41bce0f95dde45a8a66aeb535732e09e3a262;hp=31f72b18be70dd808410d511a05cb41f3ddbec85;hpb=b9459e835c78a629ee5e1d1871587acdb5640029;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.in b/configure.in
index 31f72b18be..5735d84c8b 100644
--- a/configure.in
+++ b/configure.in
@@ -1,5 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-#   1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -23,14 +23,10 @@ AC_PREREQ(2.13)
 AC_CANONICAL_SYSTEM
 AC_ARG_PROGRAM
 
-sinclude(config/acx.m4)
-
-# clear some things potentially inherited from environment.
+# Get 'install' or 'install-sh' and its variants.
+AC_PROG_INSTALL
 
-enable_libstdcxx_v3=yes
-floating_point=default
-gas=default
-x11=default
+sinclude(config/acx.m4)
 
 ### we might need to use some other shell than /bin/sh for running subshells
 ### If we are on Windows, search for the shell.  This will permit people
@@ -70,8 +66,14 @@ progname=$0
 # if PWD already has a value, it is probably wrong.
 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
 
-# Export original configure arguments for use by sub-configures.
-TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+# Export original configure arguments for use by sub-configures.  These
+# will be expanded by make, so quote '$'.
+tmp="$progname $@"
+sed -e 's,\$,$$,g' <<EOF_SED > conftestsed.out
+$tmp
+EOF_SED
+TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out`
+rm -f conftestsed.out
 AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
 
 moveifchange=${srcdir}/move-if-change
@@ -143,18 +145,19 @@ libgcj="target-libffi \
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
 #
-target_libs="target-libiberty \
+target_libraries="target-libiberty \
 		target-libgloss \
 		target-newlib \
 		target-libstdc++-v3 \
 		target-libf2c \
 		${libgcj} \
-		target-libobjc"
+		target-libobjc \
+		target-libada"
 
-# these tools are built using the target libs, and are intended to run only
-# in the target environment
+# these tools are built using the target libraries, and are intended to
+# run only in the target environment
 #
-# note: any program that *uses* libraries that are in the "target_libs"
+# note: any program that *uses* libraries that are in the "target_libraries"
 # list belongs in this list.  those programs are also very likely
 # candidates for the "native_only" list which follows
 #
@@ -169,7 +172,17 @@ target_tools="target-examples target-groff target-gperf target-rda"
 ## ${target_configdirs} is directories we build using the target tools.
 #
 configdirs=`echo ${host_libs} ${host_tools}`
-target_configdirs=`echo ${target_libs} ${target_tools}`
+target_configdirs=`echo ${target_libraries} ${target_tools}`
+
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+  # This is the only build module.
+  build_modules=libiberty
+else
+  build_modules=
+fi
+
 
 ################################################################################
 
@@ -186,30 +199,8 @@ else
   is_cross_compiler=yes
 fi	
 
-# We always want to use the same name for this directory, so that dejagnu
-# can reliably find it.
-target_subdir=${target_alias}
-
-if test ! -d ${target_subdir} ; then
-  if mkdir ${target_subdir} ; then true
-  else
-    echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
-    exit 1
-  fi
-fi
-
-build_prefix=build-
-build_subdir=${build_prefix}${build_alias}
-
-if test x"${build_alias}" != x"${host}" ; then
-  if test ! -d ${build_subdir} ; then
-    if mkdir ${build_subdir} ; then true
-    else
-      echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
-      exit 1
-    fi
-  fi
-fi
+# Find the build and target subdir names.
+GCC_TOPLEV_SUBDIRS
 
 # Skipdirs are removed silently.
 skipdirs=
@@ -258,7 +249,8 @@ esac
 
 # If both --with-headers and --with-libs are specified, default to
 # --without-newlib.
-if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+if test x"${with_headers}" != x && test x"${with_headers} != xno \
+   && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
   if test x"${with_newlib}" = x ; then
     with_newlib=no
   fi
@@ -285,27 +277,27 @@ case "${host}" in
   hppa*64*-*-*)
     noconfigdirs="$noconfigdirs byacc"
     ;;
-  i[[3456]]86-*-vsta)
-    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+  i[[3456789]]86-*-vsta)
+    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
     ;;
-  i[[3456]]86-*-go32* | i[[3456]]86-*-msdosdjgpp*)
-    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
-	;;
-  i[[3456]]86-*-mingw32*)
+  i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
+    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    ;;
+  i[[3456789]]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
-     noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
-	;;
-  i[[3456]]86-*-beos*)
-     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
-     ;;
+    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+    ;;
+  i[[3456789]]86-*-beos*)
+    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+    ;;
   *-*-cygwin*)
-     noconfigdirs="autoconf automake send-pr rcs guile perl"
+    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
     ;;
   *-*-netbsd*)
-    noconfigdirs="rcs"
+    noconfigdirs="$noconfigdirs rcs"
     ;;
   ppc*-*-pe)
-     noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
@@ -315,6 +307,14 @@ case "${host}" in
     ;;
 esac
 
+AC_ARG_ENABLE(libada,
+[  --enable-libada        Builds libada directory],
+ENABLE_LIBADA=$enableval,
+ENABLE_LIBADA=yes)
+if test "${ENABLE_LIBADA}" != "yes" ; then
+  noconfigdirs="$noconfigdirs target-libada"
+fi
+
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -335,6 +335,10 @@ case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  powerpc-*-darwin*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs target-libobjc"
+    ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
     noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
@@ -356,6 +360,7 @@ case "${target}" in
     # Skip some stuff that's unsupported on some NetBSD configurations.
     case "${target}" in
       i*86-*-netbsdelf*) ;;
+      arm*-*-netbsdelf*) ;;
       *)
 	noconfigdirs="$noconfigdirs ${libgcj}"
 	;;
@@ -373,8 +378,11 @@ case "${target}" in
         *) ;;
     esac
     ;;
+  *-*-uclinux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+    ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
@@ -389,13 +397,16 @@ case "${target}" in
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  alpha*-*-freebsd*)
+  alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  am33_2.0-*-linux*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    ;;
   sh-*-linux*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;    
@@ -454,22 +465,22 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
   cris-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   fr30-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   frv-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   h8300*-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
     ;;
   h8500-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
@@ -493,21 +504,24 @@ case "${target}" in
     # build on HP-UX 10.20.
     noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
     ;;
+  i960-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
+    ;;
   ia64*-*-elf*)
     # No gdb support yet.
     noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
     ;;
-  i[[3456]]86-*-coff | i[[3456]]86-*-elf)
+  i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  i[[34567]]86-*-freebsd*)
+  i[[3456789]]86-*-freebsd* | i[[3456789]]86-*-kfreebsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  i[[3456]]86-*-linux*)
+  i[[3456789]]86-*-linux*)
     # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
     # not build java stuff by default.
     case "${target}" in
@@ -518,7 +532,7 @@ case "${target}" in
     # This section makes it possible to build newlib natively on linux.
     # If we are using a cross compiler then don't configure newlib.
     if test x${is_cross_compiler} != xno ; then
-         noconfigdirs="$noconfigdirs target-newlib"
+      noconfigdirs="$noconfigdirs target-newlib"
     fi
     noconfigdirs="$noconfigdirs target-libgloss"
     # If we are not using a cross compiler, do configure newlib.
@@ -526,13 +540,13 @@ case "${target}" in
     # if the --with-newlib option has been given, because otherwise
     # 'target-newlib' will appear in skipdirs.
     ;;
-  i[[3456]]86-*-mingw32*)
+  i[[3456789]]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
     noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
-      i[[3456]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+      i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
       *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
          ;;
     esac
@@ -550,26 +564,29 @@ case "${target}" in
          ;;
     esac
     ;;    
-  i[[3456]]86-*-pe)
+  i[[3456789]]86-*-pe)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
-  i[[3456]]86-*-sco3.2v5*)
+  i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
-  i[[3456]]86-*-sco*)
+  i[[3456789]]86-*-sco*)
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
-  i[[3456]]86-*-solaris2*)
+  i[[3456789]]86-*-solaris2*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  i[[3456]]86-*-sysv4*)
+  i[[3456789]]86-*-sysv4*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  i[[3456]]86-*-beos*)
-     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
-     ;;
+  i[[3456789]]86-*-beos*)
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    ;;
+  m32r-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
@@ -595,7 +612,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
@@ -613,16 +630,11 @@ case "${target}" in
   powerpc-*-eabi)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  powerpc64*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    # not yet ported.
-    noconfigdirs="$noconfigdirs target-libffi"
-    ;;
   rs6000-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
@@ -649,7 +661,10 @@ case "${target}" in
     ;;
   mipstx39-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"   # same as generic mips
-   ;;
+    ;;
+  mips64*-*-linux*)
+    noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
+    ;;
   mips*-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
@@ -661,9 +676,9 @@ case "${target}" in
     ;;
   sh-*-*)
     case "${host}" in
-      i[[3456]]86-*-vsta) ;; # don't add gprof back in
-      i[[3456]]86-*-go32*) ;; # don't add gprof back in
-      i[[3456]]86-*-msdosdjgpp*) ;; # don't add gprof back in
+      i[[3456789]]86-*-vsta) ;; # don't add gprof back in
+      i[[3456789]]86-*-go32*) ;; # don't add gprof back in
+      i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
       *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
     esac
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -708,6 +723,9 @@ case "${target}" in
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  xtensa-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
@@ -729,268 +747,6 @@ case "${noconfigdirs}" in
   *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
 esac
 
-# Figure out what language subdirectories are present.
-# Look if the user specified --enable-languages="..."; if not, use
-# the environment variable $LANGUAGES if defined. $LANGUAGES might
-# go away some day.
-# NB:  embedded tabs in this IF block -- do not untabify
-if test x"${enable_languages+set}" != xset; then
-	if test x"${LANGUAGES+set}" = xset; then
-		enable_languages="${LANGUAGES}"
-		echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
-	else
-		enable_languages=all
-	fi
-else
-	if test x"${enable_languages}" = x ||
-	   test x"${enable_languages}" = xyes;
-	then
-		echo configure.in: --enable-languages needs at least one language argument 1>&2
-		exit 1
-	fi
-fi
-enable_languages=`echo "${enable_languages}" | sed -e 's/[[ 	,]][[ 	,]]*/,/g' -e 's/,$//'`
-
-# First scan to see if an enabled language requires some other language.
-# We assume that a given config-lang.in will list all the language
-# front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-   case $lang in
-    ..)
-       ;;
-    # The odd quoting in the next line works around
-    # an apparent bug in bash 1.12 on linux.
-    ${srcdir}/gcc/[[*]]/config-lang.in)
-       ;;
-    *)
-       lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ 	]]*\).*$,\1,p' $lang`
-       this_lang_requires=`sed -n -e 's,^lang_requires=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_requires=\([[^ 	]]*\).*$,\1,p' $lang`
-       for other in $this_lang_requires
-       do
-	  case ,${enable_languages}, in
-	   *,$other,*)
-	      ;;
-	   *,all,*)
-	      ;;
-	   *,$lang_alias,*)
-	      echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
-	      enable_languages="$enable_languages,$other"
-	      ;;
-	  esac
-       done
-       ;;
-   esac
-done
-
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-	case $lang in
-	..) ;;
-	# The odd quoting in the next line works around
-	# an apparent bug in bash 1.12 on linux.
-	${srcdir}/gcc/[[*]]/config-lang.in) ;;
-	*)
-	  lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ 	]]*\).*$,\1,p' $lang`
-	  this_lang_libs=`sed -n -e 's,^target_libs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^target_libs=\([[^ 	]]*\).*$,\1,p' $lang`
-	  this_lang_dirs=`sed -n -e 's,^lang_dirs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_dirs=\([[^ 	]]*\).*$,\1,p' $lang`
-	  build_by_default=`sed -n -e 's,^build_by_default=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^build_by_default=\([[^ 	]]*\).*$,\1,p' $lang`
-	  if test "x$lang_alias" = x
-	  then
-		echo "$lang doesn't set \$language." 1>&2
-		exit 1
-	  fi
-	  case ${build_by_default},${enable_languages}, in
-	  *,$lang_alias,*) add_this_lang=yes ;;
-	  no,*) add_this_lang=no ;;
-	  *,all,*) add_this_lang=yes ;;
-	  *) add_this_lang=no ;;
-	  esac
-	  if test x"${add_this_lang}" = xyes; then
-	      eval target_libs='"$target_libs "'\"$this_lang_libs\"
-	  else
-	      eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
-	  fi
-	  ;;
-	esac
-done
-
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
-# If we have the source for $noconfigdirs entries, add them to $notsupp.
-
-notsupp=""
-for dir in . $skipdirs $noconfigdirs ; do
-  dirname=`echo $dir | sed -e s/target-//g`
-  if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-    configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure ; then
-      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-	true
-      else
-	notsupp="$notsupp $dir"
-      fi
-    fi
-  fi
-  if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-    target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure ; then
-      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-	true
-      else
-	notsupp="$notsupp $dir"
-      fi
-    fi
-  fi
-done
-
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries.  In that case, we don't want to build target-libiberty.
-if test -n "${target_configdirs}" ; then
-  others=
-  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
-    if test "$i" != "libiberty" ; then
-      if test -r $srcdir/$i/configure ; then
-	others=yes;
-	break;
-      fi
-    fi
-  done
-  if test -z "${others}" ; then
-    target_configdirs=
-  fi
-fi
-
-# Quietly strip out all directories which aren't configurable in this tree.
-# This relies on all configurable subdirectories being autoconfiscated, which
-# is now the case.
-configdirs_all="$configdirs"
-configdirs=
-for i in ${configdirs_all} ; do
-  if test -f ${srcdir}/$i/configure ; then
-    configdirs="${configdirs} $i"
-  fi
-done
-target_configdirs_all="$target_configdirs"
-target_configdirs=
-for i in ${target_configdirs_all} ; do
-  j=`echo $i | sed -e s/target-//g` 
-  if test -f ${srcdir}/$j/configure ; then
-    target_configdirs="${target_configdirs} $i"
-  fi
-done
-
-# Produce a warning message for the subdirs we can't configure.
-# This isn't especially interesting in the Cygnus tree, but in the individual
-# FSF releases, it's important to let people know when their machine isn't
-# supported by the one or two programs in a package.
-
-if test -n "${notsupp}" && test -z "${norecursion}" ; then
-  # If $appdirs is non-empty, at least one of those directories must still
-  # be configured, or we error out.  (E.g., if the gas release supports a
-  # specified target in some subdirs but not the gas subdir, we shouldn't
-  # pretend that all is well.)
-  if test -n "$appdirs" ; then
-    for dir in $appdirs ; do
-      if test -r $dir/Makefile.in ; then
-	if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-	  appdirs=""
-	  break
-	fi
-	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
-	  appdirs=""
-	  break
-	fi
-      fi
-    done
-    if test -n "$appdirs" ; then
-      echo "*** This configuration is not supported by this package." 1>&2
-      exit 1
-    fi
-  fi
-  # Okay, some application will build, or we don't care to check.  Still
-  # notify of subdirs not getting built.
-  echo "*** This configuration is not supported in the following subdirectories:" 1>&2
-  echo "    ${notsupp}" 1>&2
-  echo "    (Any other directories should still work fine.)" 1>&2
-fi
-
-case "$host" in
-  *msdosdjgpp*)
-    enable_gdbtk=no ;;
-esac
-
-copy_dirs=
-
-# Handle --with-headers=XXX.  If the value is not "yes", the contents of
-# the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x ; then
-  if test x${is_cross_compiler} = xno ; then
-    echo 1>&2 '***' --with-headers is only supported when cross compiling
-    exit 1
-  fi
-  if test x"${with_headers}" != xyes ; then
-    case "${exec_prefixoption}" in
-    "") x=${prefix} ;;
-    *) x=${exec_prefix} ;;
-    esac
-    copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
-  fi
-fi
-
-# Handle --with-libs=XXX.  If the value is not "yes", the contents of
-# the name directories are copied to $(tooldir)/lib.  Multiple directories
-# are permitted.
-if test x"${with_libs}" != x ; then
-  if test x${is_cross_compiler} = xno ; then
-    echo 1>&2 '***' --with-libs is only supported when cross compiling
-    exit 1
-  fi
-  if test x"${with_libs}" != xyes ; then
-    # Copy the libraries in reverse order, so that files in the first named
-    # library override files in subsequent libraries.
-    case "${exec_prefixoption}" in
-    "") x=${prefix} ;;
-    *) x=${exec_prefix} ;;
-    esac
-    for l in ${with_libs}; do
-      copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
-    done
-  fi
-fi
-
-# Handle ${copy_dirs}
-set fnord ${copy_dirs}
-shift
-while test $# != 0 ; do
-  if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
-    :
-  else
-    echo Copying $1 to $2
-
-    # Use the install script to create the directory and all required
-    # parent directories.
-    if test -d $2 ; then
-      :
-    else
-      echo >config.temp
-      ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
-    fi
-
-    # Copy the directory, assuming we have tar.
-    # FIXME: Should we use B in the second tar?  Not all systems support it.
-    (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
-
-    # It is the responsibility of the user to correctly adjust all
-    # symlinks.  If somebody can figure out how to handle them correctly
-    # here, feel free to add the code.
-
-    echo $1 > $2/COPIED
-  fi
-  shift; shift
-done
-
 # Work in distributions that contain no compiler tools, like Autoconf.
 tentative_cc=""
 host_makefile_frag=/dev/null
@@ -1062,19 +818,19 @@ case "${host}" in
   i370-ibm-opened*)
     tentative_cc="c89"
     ;;
-  i[[3456]]86-*-sysv5*)
+  i[[3456789]]86-*-sysv5*)
     host_makefile_frag="config/mh-sysv5"
     ;;
-  i[[3456]]86-*-dgux*)
+  i[[3456789]]86-*-dgux*)
     tentative_cc="gcc -Wall -ansi -D__using_DGUX"
     host_makefile_frag="config/mh-dgux386"
     ;;
-  i[[3456]]86-ncr-sysv4.3*)
+  i[[3456789]]86-ncr-sysv4.3*)
     # The MetaWare compiler will generate a copyright message unless you
     # turn it off by adding the -Hnocopyr flag.
     tentative_cc="cc -Hnocopyr"
     ;;
-  i[[3456]]86-ncr-sysv4*)
+  i[[3456789]]86-ncr-sysv4*)
     # for an NCR 3000 (i486/SVR4) system.
     # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
     # This compiler not only emits obnoxious copyright messages every time
@@ -1083,21 +839,21 @@ case "${host}" in
     tentative_cc="/usr/ccs/ATT/cc"
     host_makefile_frag="config/mh-ncr3000"
     ;;
-  i[[3456]]86-*-sco3.2v5*)
+  i[[3456789]]86-*-sco3.2v5*)
     ;;
-  i[[3456]]86-*-sco*)
+  i[[3456789]]86-*-sco*)
     # The native C compiler botches some simple uses of const.  Unfortunately,
     # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
     tentative_cc="cc -Dconst="
     host_makefile_frag="config/mh-sco"
     ;;
-  i[[3456]]86-*-udk*)
+  i[[3456789]]86-*-udk*)
     host_makefile_frag="config/mh-sysv5"
     ;;
-  i[[3456]]86-*-solaris2*)
+  i[[3456789]]86-*-solaris2*)
     host_makefile_frag="config/mh-sysv4"
     ;;
-  i[[3456]]86-*-msdosdjgpp*)
+  i[[3456789]]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
   *-cygwin*)
@@ -1142,124 +898,6 @@ case "${host}" in
 esac
 fi
 
-extra_arflags_for_target=
-extra_nmflags_for_target=
-extra_ranlibflags_for_target=
-target_makefile_frag=/dev/null
-case "${target}" in
-  i[[3456]]86-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
-  powerpc-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
-  *-*-linux*)
-    target_makefile_frag="config/mt-linux"
-    ;;
-  *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
-    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
-    # commands to handle both 32-bit and 64-bit objects.  These flags are
-    # harmless if we're using GNU nm or ar.
-    extra_arflags_for_target=" -X32_64"
-    extra_nmflags_for_target=" -B -X32_64"
-    ;;
-  *-*-darwin*)
-    # ranlib from Darwin requires the -c flag to look at common symbols.
-    extra_ranlibflags_for_target=" -c"
-    ;;
-  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
-    target_makefile_frag="config/mt-wince"
-    ;;
-esac
-
-alphaieee_frag=/dev/null
-case $target in
-  alpha*-*-*)
-    # This just makes sure to use the -mieee option to build target libs.
-    # This should probably be set individually by each library.
-    alphaieee_frag="config/mt-alphaieee"
-    ;;
-esac
-
-# If --enable-target-optspace always use -Os instead of -O2 to build
-# the target libraries, similarly if it is not specified, use -Os
-# on selected platforms.
-ospace_frag=/dev/null
-case "${enable_target_optspace}:${target}" in
-  yes:*)
-    ospace_frag="config/mt-ospace"
-    ;;
-  :d30v-*)
-    ospace_frag="config/mt-d30v"
-    ;;
-  :m32r-* | :d10v-* | :fr30-*)
-    ospace_frag="config/mt-ospace"
-    ;;
-  no:* | :*)
-    ;;
-  *)
-    echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
-    ;;
-esac
-
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-# 
-# The command line options always override the explicit settings in 
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't 
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
-   echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
-  with_gnu_as=yes
-  extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
-   echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
-  with_gnu_ld=yes
-  extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
-  with_newlib=yes
-  extra_host_args="$extra_host_args --with-newlib"
-fi
-
-
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
-  case "${target}" in
-  mips*-*-irix6*o32)
-    with_stabs=yes;
-    extra_host_args="${extra_host_args} --with-stabs"
-    ;;
-  mips*-*-irix6*)
-    ;;
-  mips*-*-* | alpha*-*-osf*)
-    with_stabs=yes;
-    extra_host_args="${extra_host_args} --with-stabs"
-    ;;
-  esac
-fi
-
-# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
-# them automatically.
-case "${host}" in
-  hppa*64*-*-hpux11*)	
-    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
-    ;;
-esac
-
 # If we aren't going to be using gcc, see if we can extract a definition
 # of CC from the fragment.
 # Actually, use the 'pre-extracted' version above.
@@ -1279,68 +917,6 @@ if test -z "${CC}" && test "${build}" = "${host}" ; then
   fi
 fi
 
-# Some systems (e.g., one of the i386-aix systems the gas testers are
-# using) don't handle "\$" correctly, so don't use it here.
-tooldir='$(exec_prefix)'/${target_alias}
-build_tooldir=${tooldir}
-
-# Generate a default definition for YACC.  This is used if the makefile can't
-# locate bison or byacc in objdir.
-
-for prog in 'bison -y' byacc yacc
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_YACC="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_YACC" && break
-done
-
-# Generate a default definition for M4.  This is used if the makefile can't
-# locate m4 in objdir.
-
-for prog in gm4 gnum4 m4
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_M4="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_M4" && break
-done
-
-# Generate a default definition for LEX.  This is used if the makefile can't
-# locate flex in objdir.
-
-for prog in flex lex
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_LEX="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_LEX" && break
-done
-
 if test "${build}" != "${host}" ; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
@@ -1468,73 +1044,465 @@ EOF
     fi
   fi
 
-  # We must set the default linker to the linker used by gcc for the correct
-  # operation of libtool.  If LD is not defined and we are using gcc, try to
-  # set the LD default to the ld used by gcc.
-  if test -z "$LD"; then
-    if test "$cc_prog_is_gcc" = yes; then
-      case $build in
-      *-*-mingw*)
-	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
-      *)
-	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
-      esac
-      case $gcc_prog_ld in
-      # Accept absolute paths.
-      [[\\/]* | [A-Za-z]:[\\/]*)]
-        LD="$gcc_prog_ld" ;;
-      esac
+  # We must set the default linker to the linker used by gcc for the correct
+  # operation of libtool.  If LD is not defined and we are using gcc, try to
+  # set the LD default to the ld used by gcc.
+  if test -z "$LD"; then
+    if test "$cc_prog_is_gcc" = yes; then
+      case $build in
+      *-*-mingw*)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+      *)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+      esac
+      case $gcc_prog_ld in
+      # Accept absolute paths.
+      [[\\/]* | [A-Za-z]:[\\/]*)]
+        LD="$gcc_prog_ld" ;;
+      esac
+    fi
+  fi
+
+  CXX=${CXX-"c++"}
+  CFLAGS=${CFLAGS-"-g"}
+  CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
+ACX_PROG_GNAT
+
+# By default, C is the only stage 1 language.
+stage1_languages=c
+AC_SUBST(stage1_languages)
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB:  embedded tabs in this IF block -- do not untabify
+if test -d ${srcdir}/gcc; then
+  if test x"${enable_languages+set}" != xset; then
+    if test x"${LANGUAGES+set}" = xset; then
+      enable_languages="${LANGUAGES}"
+        echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+    else
+      enable_languages=all
+    fi
+  else
+    if test x"${enable_languages}" = x ||
+       test x"${enable_languages}" = xyes;
+       then
+      echo configure.in: --enable-languages needs at least one language argument 1>&2
+      exit 1
+    fi
+  fi
+  enable_languages=`echo "${enable_languages}" | sed -e 's/[[ 	,]][[ 	,]]*/,/g' -e 's/,$//'`
+
+  # First scan to see if an enabled language requires some other language.
+  # We assume that a given config-lang.in will list all the language
+  # front ends it requires, even if some are required indirectly.
+  for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+    case ${lang_frag} in
+      ..) ;;
+      # The odd quoting in the next line works around
+      # an apparent bug in bash 1.12 on linux.
+      ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+      *)
+        # From the config-lang.in, get $language, $lang_requires
+        language=
+        lang_requires=
+        . ${lang_frag}
+        for other in ${lang_requires} ; do
+          case ,${enable_languages}, in
+	    *,$other,*) ;;
+	    *,all,*) ;;
+	    *,$language,*)
+	      echo " \`$other' language required by \`$language'; enabling" 1>&2
+	      enable_languages="${enable_languages},${other}"
+	      ;;
+	  esac
+        done
+        ;;
+    esac
+  done
+
+  new_enable_languages=c
+  missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+
+  for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+    case ${lang_frag} in
+      ..) ;;
+      # The odd quoting in the next line works around
+      # an apparent bug in bash 1.12 on linux.
+      ${srcdir}/gcc/[[*]]/config-lang.in) ;;
+      *)
+        # From the config-lang.in, get $language, $target_libs, 
+        # $lang_dirs, $boot_language, and $build_by_default
+        language=
+        target_libs=
+        lang_dirs=
+        boot_language=
+        build_by_default=
+        . ${lang_frag}
+        # This is quite sensitive to the ordering of the case statement arms.
+        case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
+          *::*:*)
+            echo "${lang_frag} doesn't set \$language." 1>&2
+            exit 1
+	    ;;
+          *:ada:no:*)
+            # Ada was requested with no preexisting GNAT.  Disable unconditionally.
+            add_this_lang=no
+            ;;
+          *,${language},*:*:*:*)
+            # Language was explicitly selected; include it.
+            add_this_lang=yes
+            ;;
+          *,all,*:*:*:no)
+            # 'all' was selected, but this is not a default language
+	    # so do not include it.
+            add_this_lang=no
+	    ;;
+          *,all,*:*:*:*)
+            # 'all' was selected and this is a default language; include it.
+            add_this_lang=yes
+            ;;
+          *)
+            add_this_lang=no
+            ;;
+        esac
+        case $add_this_lang in
+	  no)
+            # Remove language-dependent dirs.
+            eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+	    ;;
+          *)
+	    new_enable_languages="$new_enable_languages,$language"
+	    missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+	    case ${boot_language} in
+	      yes)
+		# Add to (comma-separated) list of stage 1 languages.
+		stage1_languages="${stage1_languages},${language}"
+		;;
+	    esac
+	    ;;
+        esac
+        ;;
+    esac
+  done
+
+  missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+  if test "x$missing_languages" != x; then
+    AC_MSG_ERROR([
+The following requested languages were not found: ${missing_languages}])
+  fi
+
+  if test "x$new_enable_languages" != "x$enable_languages"; then
+    echo The following languages will be built: ${new_enable_languages}
+  fi
+  enable_languages="$new_enable_languages"
+  ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
+fi
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+  dirname=`echo $dir | sed -e s/target-//g`
+  if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
+  if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries.  In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+  others=
+  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+    if test "$i" != "libiberty" ; then
+      if test -r $srcdir/$i/configure ; then
+	others=yes;
+	break;
+      fi
+    fi
+  done
+  if test -z "${others}" ; then
+    target_configdirs=
+  fi
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+  if test -f ${srcdir}/$i/configure ; then
+    configdirs="${configdirs} $i"
+  fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+  j=`echo $i | sed -e s/target-//g` 
+  if test -f ${srcdir}/$j/configure ; then
+    target_configdirs="${target_configdirs} $i"
+  fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+  # If $appdirs is non-empty, at least one of those directories must still
+  # be configured, or we error out.  (E.g., if the gas release supports a
+  # specified target in some subdirs but not the gas subdir, we shouldn't
+  # pretend that all is well.)
+  if test -n "$appdirs" ; then
+    for dir in $appdirs ; do
+      if test -r $dir/Makefile.in ; then
+	if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	  appdirs=""
+	  break
+	fi
+	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	  appdirs=""
+	  break
+	fi
+      fi
+    done
+    if test -n "$appdirs" ; then
+      echo "*** This configuration is not supported by this package." 1>&2
+      exit 1
+    fi
+  fi
+  # Okay, some application will build, or we don't care to check.  Still
+  # notify of subdirs not getting built.
+  echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+  echo "    ${notsupp}" 1>&2
+  echo "    (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+  *msdosdjgpp*)
+    enable_gdbtk=no ;;
+esac
+
+copy_dirs=
+
+# Handle --with-headers=XXX.  If the value is not "yes", the contents of
+# the named directory are copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
+  if test x${is_cross_compiler} = xno ; then
+    echo 1>&2 '***' --with-headers is only supported when cross compiling
+    exit 1
+  fi
+  if test x"${with_headers}" != xyes ; then
+    case "${exec_prefixoption}" in
+    "") x=${prefix} ;;
+    *) x=${exec_prefix} ;;
+    esac
+    copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+  fi
+fi
+
+# Handle --with-libs=XXX.  If the value is not "yes", the contents of
+# the name directories are copied to $(tooldir)/lib.  Multiple directories
+# are permitted.
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
+  if test x${is_cross_compiler} = xno ; then
+    echo 1>&2 '***' --with-libs is only supported when cross compiling
+    exit 1
+  fi
+  if test x"${with_libs}" != xyes ; then
+    # Copy the libraries in reverse order, so that files in the first named
+    # library override files in subsequent libraries.
+    case "${exec_prefixoption}" in
+    "") x=${prefix} ;;
+    *) x=${exec_prefix} ;;
+    esac
+    for l in ${with_libs}; do
+      copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+    done
+  fi
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+  if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+    :
+  else
+    echo Copying $1 to $2
+
+    # Use the install script to create the directory and all required
+    # parent directories.
+    if test -d $2 ; then
+      :
+    else
+      echo >config.temp
+      ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
     fi
+
+    # Copy the directory, assuming we have tar.
+    # FIXME: Should we use B in the second tar?  Not all systems support it.
+    (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+    # It is the responsibility of the user to correctly adjust all
+    # symlinks.  If somebody can figure out how to handle them correctly
+    # here, feel free to add the code.
+
+    echo $1 > $2/COPIED
   fi
+  shift; shift
+done
 
-  CXX=${CXX-"c++"}
-  CFLAGS=${CFLAGS-"-g"}
-  CXXFLAGS=${CXXFLAGS-"-g -O2"}
+extra_arflags_for_target=
+extra_nmflags_for_target=
+extra_ranlibflags_for_target=
+target_makefile_frag=/dev/null
+case "${target}" in
+  i[[3456789]]86-*-netware*)
+    target_makefile_frag="config/mt-netware"
+    ;;
+  powerpc-*-netware*)
+    target_makefile_frag="config/mt-netware"
+    ;;
+  *-*-linux*)
+    target_makefile_frag="config/mt-linux"
+    ;;
+  *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
+    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
+    # commands to handle both 32-bit and 64-bit objects.  These flags are
+    # harmless if we're using GNU nm or ar.
+    extra_arflags_for_target=" -X32_64"
+    extra_nmflags_for_target=" -B -X32_64"
+    ;;
+  *-*-darwin*)
+    # ranlib from Darwin requires the -c flag to look at common symbols.
+    extra_ranlibflags_for_target=" -c"
+    ;;
+  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+    target_makefile_frag="config/mt-wince"
+    ;;
+esac
+
+alphaieee_frag=/dev/null
+case $target in
+  alpha*-*-*)
+    # This just makes sure to use the -mieee option to build target libs.
+    # This should probably be set individually by each library.
+    alphaieee_frag="config/mt-alphaieee"
+    ;;
+esac
+
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+ospace_frag=/dev/null
+case "${enable_target_optspace}:${target}" in
+  yes:*)
+    ospace_frag="config/mt-ospace"
+    ;;
+  :d30v-*)
+    ospace_frag="config/mt-d30v"
+    ;;
+  :m32r-* | :d10v-* | :fr30-*)
+    ospace_frag="config/mt-ospace"
+    ;;
+  no:* | :*)
+    ;;
+  *)
+    echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+    ;;
+esac
+
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+# 
+# The command line options always override the explicit settings in 
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't 
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+   echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+  with_gnu_as=yes
+  extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+   echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+  with_gnu_ld=yes
+  extra_host_args="$extra_host_args --with-gnu-ld"
 fi
 
-# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
 
-# Make the links.
-configlinks="${links}"
-if test -r ./config.status  ; then
-  mv -f ./config.status ./config.back
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+  with_newlib=yes
+  extra_host_args="$extra_host_args --with-newlib"
 fi
-while test -n "${files}" ; do
-  # set file to car of files, files to cdr of files
-  set ${files}; file=$1; shift; files=$*
-  set ${links}; link=$1; shift; links=$*
-
-  if test ! -r ${srcdir}/${file} ; then
-    if test ! -r ${file} ; then
-      echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-      echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
-      exit 1
-    else
-      srcfile=${file}
-    fi
-  else
-    srcfile=${srcdir}/${file}
-  fi
 
-  ${remove} -f ${link}
-  # Make a symlink if possible, otherwise try a hard link
-  if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
-    true
-  else
-    # We need to re-remove the file because Lynx leaves a 
-    # very strange directory there when it fails an NFS symlink.
-    ${remove} -r -f ${link}
-    ${hard_link} ${srcfile} ${link}
-  fi
-  if test ! -r ${link} ; then
-    echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
-    exit 1
-  fi
 
-  echo "Linked \"${link}\" to \"${srcfile}\"."
-done
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+  case "${target}" in
+  mips*-*-irix[[56]]*)
+    ;;
+  mips*-*-* | alpha*-*-osf*)
+    with_stabs=yes;
+    extra_host_args="${extra_host_args} --with-stabs"
+    ;;
+  esac
+fi
+
+# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
+# them automatically.
+case "${host}" in
+  hppa*64*-*-hpux11*)	
+    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+    ;;
+esac
+
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='${exec_prefix}'/${target_alias}
+build_tooldir=${tooldir}
+
+# Generate default definitions for YACC, M4, LEX.  These are used if the
+# Makefile can't locate these programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+AC_CHECK_PROGS([DEFAULT_YACC], ['bison -y' byacc yacc], [$MISSING bison])
+AC_CHECK_PROGS([DEFAULT_M4], [gm4 gnum4 m4], [$MISSING m4])
+AC_CHECK_PROGS([DEFAULT_LEX], [flex lex], [$MISSING flex])
 
 # Create a .gdbinit file which runs the one in srcdir
 # and tells GDB to look there for source files.
@@ -1552,12 +1520,6 @@ EOF
   esac
 fi
 
-# record if we want runtime library stuff installed in libsubdir.
-# Blank means no.
-if test -z "${enable_version_specific_runtime_libs}"; then
-  enable_version_specific_runtime_libs=no
-fi
-
 # Make sure that the compiler is able to generate an executable.  If it
 # can't, we are probably in trouble.  We don't care whether we can run the
 # executable--we might be using a cross compiler--we only care whether it
@@ -1625,59 +1587,14 @@ esac
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 
 # This is the final value for target_configdirs.  configdirs already
-# has its final value.  It's time to create some lists of valid targets.
-
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, such that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
+# has its final value, as does build_modules.  It's time to create some 
+# lists of valid targets.
 
 all_build_modules=
 configure_build_modules=
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
-  for module in libiberty ; do
-    all_build_modules=all-build-${module}
-    configure_build_modules=configure-build-${module}
-    if test -z "${no_recursion}" \
-       && test -f ${build_subdir}/${module}/Makefile; then
-      echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
-      rm -f ${build_subdir}/${module}/Makefile
-    fi
-  done
-fi
-
-all_host_modules=
-check_host_modules=
-install_host_modules=
-configure_host_modules=
-for module in ${configdirs} ; do
-  all_host_modules="${all_host_modules} all-${module}"
-  check_host_modules="${check_host_modules} check-${module}"
-  install_host_modules="${install_host_modules} install-${module}"
-  configure_host_modules="${configure_host_modules} configure-${module}"
-  if test -z "${no_recursion}" \
-     && test -f ${module}/Makefile; then
-    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
-    rm -f ${module}/Makefile
-  fi
-done
-install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
-
-all_target_modules=
-check_target_modules=
-install_target_modules=
-configure_target_modules=
-for module in ${target_configdirs} ; do
-  all_target_modules="${all_target_modules} all-target-${module}"
-  check_target_modules="${check_target_modules} check-target-${module}"
-  install_target_modules="${install_target_modules} install-target-${module}"
-  configure_target_modules="${configure_target_modules} configure-target-${module}"
-  if test -z "${no_recursion}" \
-     && test -f ${target_subdir}/${module}/Makefile; then
-    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
-    rm -f ${target_subdir}/${module}/Makefile
-  fi
+for module in ${build_modules} ; do
+  all_build_modules=all-build-${module}
+  configure_build_modules=configure-build-${module}
 done
 
 # Determine whether gdb needs tk/tcl or not.
@@ -1707,13 +1624,50 @@ case "$enable_gdbtk" in
 esac
 
 # Create the 'maybe dependencies'.  This uses a temporary file.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
 rm -f maybedep.tmp
 echo '# maybedep.tmp' > maybedep.tmp
-for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
-	${install_host_modules} ${install_target_modules} \
-	${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
-	; do
-  echo "maybe-${item}: ${item}" >> maybedep.tmp
+
+# Make-targets which may need maybe dependencies.
+mts="configure all install check clean distclean dvi info install-info"
+mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
+
+# Loop over modules and make-targets.
+for module in ${build_modules} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${build_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${build_subdir}/${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    case ${mt} in
+      install) ;; # No installing build modules.
+      *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
+    esac
+  done
+done
+for module in ${configdirs} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${module}/Makefile; then
+    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+    rm -f ${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
+  done
+done
+for module in ${target_configdirs} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${target_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${target_subdir}/${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
+  done
 done
 maybe_dependencies=maybedep.tmp
 AC_SUBST_FILE(maybe_dependencies)
@@ -1721,18 +1675,25 @@ AC_SUBST_FILE(maybe_dependencies)
 # Create the serialization dependencies.  This uses a temporary file.
 
 AC_ARG_ENABLE([serial-configure],
-[  --disable-serial-[{host,target,build}-]configure
-                          Don't force sequential configuration of
+[  --enable-serial-[{host,target,build}-]configure
+                          Force sequential configuration of
                           sub-packages for the host, target or build
-			  machine, or of any sub-packages at all])
+			  machine, or all sub-packages])
+
+case ${enable_serial_configure} in
+  yes)
+    enable_serial_build_configure=yes
+    enable_serial_host_configure=yes
+    enable_serial_target_configure=yes
+    ;;
+esac
 
 # These force 'configure's to be done one at a time, to avoid problems
 # with contention over a shared config.cache.
 rm -f serdep.tmp
 echo '# serdep.tmp' > serdep.tmp
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_build_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xyes &&
 for item in ${build_configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -1741,8 +1702,7 @@ for item in ${build_configdirs} ; do
   olditem=${item}
 done
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_host_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xyes &&
 for item in ${configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -1751,8 +1711,7 @@ for item in ${configdirs} ; do
   olditem=${item}
 done
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_target_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xyes &&
 for item in ${target_configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -1765,21 +1724,53 @@ AC_SUBST_FILE(serialization_dependencies)
 
 # Base args.  Strip norecursion, cache-file, srcdir, host, build,
 # target and nonopt.  These are the ones we might not want to pass
-# down to subconfigures.
-baseargs=`echo " ${ac_configure_args} " | \
-	sed -e 's/ --no[[^ ]]* / /' \
-	    -e 's/ --c[[a-z-]]*[[= ]][[^ ]]* / /' \
-	    -e 's/ --sr[[a-z-]]*[[= ]][[^ ]]* / /' \
-	    -e 's/ --ho[[a-z-]]*[[= ]][[^ ]]* / /' \
-	    -e 's/ --bu[[a-z-]]*[[= ]][[^ ]]* / /' \
-	    -e 's/ --t[[a-z-]]*[[= ]][[^ ]]* / /' \
-	    -e 's/ -cache-file[[= ]][[^ ]]* / /' \
-	    -e 's/ -srcdir[[= ]][[^ ]]* / /' \
-	    -e 's/ -host[[= ]][[^ ]]* / /' \
-	    -e 's/ -build[[= ]][[^ ]]* / /' \
-	    -e 's/ -target[[= ]][[^ ]]* / /' \
-	    -e 's/ [[^ -][^ ]*] / /' \
-	    -e 's/^ *//;s/ *$//'`
+# down to subconfigures.  Also strip program-prefix, program-suffix,
+# and program-transform-name, so that we can pass down a consistent
+# program-transform-name.  If autoconf has put single quotes around
+# any of these arguments (because they contain shell metacharacters)
+# then this will fail; in practice this only happens for
+# --program-transform-name, so be sure to override --program-transform-name
+# at the end of the argument list.
+# These will be expanded by make, so quote '$'.
+cat <<\EOF_SED > conftestsed
+s/ --no[[^ ]]* / /
+s/ --c[[a-z-]]*[[= ]][[^ ]]* / /
+s/ --sr[[a-z-]]*[[= ]][[^ ]]* / /
+s/ --ho[[a-z-]]*[[= ]][[^ ]]* / /
+s/ --bu[[a-z-]]*[[= ]][[^ ]]* / /
+s/ --t[[a-z-]]*[[= ]][[^ ]]* / /
+s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]* / /
+s/ -cache-file[[= ]][[^ ]]* / /
+s/ -srcdir[[= ]][[^ ]]* / /
+s/ -host[[= ]][[^ ]]* / /
+s/ -build[[= ]][[^ ]]* / /
+s/ -target[[= ]][[^ ]]* / /
+s/ -program-prefix[[= ]][[^ ]]* / /
+s/ -program-suffix[[= ]][[^ ]]* / /
+s/ -program-transform-name[[= ]][[^ ]]* / /
+s/ [[^' -][^ ]*] / /
+s/^ *//;s/ *$//
+s,\$,$$,g
+EOF_SED
+sed -f conftestsed <<EOF_SED > conftestsed.out
+ ${ac_configure_args} 
+EOF_SED
+baseargs=`cat conftestsed.out`
+rm -f conftestsed conftestsed.out
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it.  Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell. 
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
 
 # For the build-side libraries, we just need to pretend we're native,
 # and not use the same cache file.  Multilibs are neither needed nor
@@ -1796,7 +1787,9 @@ case "${cache_file}" in
   cache_file_option="--cache-file=../${cache_file}" ;;
 esac
 
-host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
 
 target_configargs=${baseargs}
 
@@ -1820,37 +1813,35 @@ if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib
   target_configargs="--with-newlib ${target_configargs}"
 fi
 
+# Different target subdirs use different values of certain variables
+# (notably CXX).  Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it.  Hopefully this can be
+# fixed in future.  It's still worthwhile to use a cache file for each
+# directory.  I think.
+
 # Pass the appropriate --host, --build, and --cache-file arguments.
-target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
 
 # provide a proper gxx_include_dir.
 # Note, if you change the default, make sure to fix both here and in
 # the gcc and libstdc++-v3 subdirectories.
 # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
-  case "${with_gxx_include_dir}" in
-    yes )
-      echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
-      exit 1
-      ;;
-    no )
-      ;;
-    * )
-      gxx_include_dir=${with_gxx_include_dir}
-      ;;
-  esac
-fi
-if test x${gxx_include_dir} = x; then
-  if test x${enable_version_specific_runtime_libs} = xyes; then
-    gxx_include_dir='${libsubdir}/include/c++'
-  else
-    . ${srcdir}/config.if
-    gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
-  fi
-else
-  gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+  yes)
+    AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
+    ;;
+  no | "")
+    case "${enable_version_specific_runtime_libs}" in
+      yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+      *)
+        . ${srcdir}/config.if
+        gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+    esac ;;
+  *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
 
 FLAGS_FOR_TARGET=
 case " $target_configdirs " in
@@ -1859,7 +1850,7 @@ case " $target_configdirs " in
   *" --with-newlib "*)
    case "$target" in
    *-cygwin*)
-     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
    esac
 
    # If we're not building GCC, don't discard standard headers.
@@ -1886,7 +1877,7 @@ case " $target_configdirs " in
    fi
 
    case "${target}-${is_cross_compiler}" in
-   i[[3456]]86-*-linux*-no)
+   i[[3456789]]86-*-linux*-no)
       # Here host == target, so we don't need to build gcc,
       # so we don't want to discard standard headers.
       FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
@@ -1903,13 +1894,17 @@ case " $target_configdirs " in
   ;;
 esac
 
+# Allow the user to override the flags for
+# our build compiler if desired.
+CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+
 # On Canadian crosses, we'll be searching the right directories for
 # the previously-installed cross compiler, so don't bother to add
 # flags for directories within the install tree of the compiler
 # being built; programs in there won't even run.
 if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
   # Search for pre-installed headers if nothing else fits.
-  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
 fi
 
 if test "x${use_gnu_ld}" = x &&
@@ -1941,11 +1936,13 @@ fi
 GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
 
 # Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
 
 if test "x${CXX_FOR_TARGET+set}" = xset; then
-  :
+  if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
+    RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+  fi
 elif test -d ${srcdir}/gcc; then
   # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
   # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
@@ -1999,8 +1996,6 @@ AC_SUBST(SET_LIB_PATH)
 AC_SUBST(RPATH_ENVVAR)
 AC_SUBST(BUILD_PREFIX)
 AC_SUBST(BUILD_PREFIX_1)
-AC_SUBST(configlinks)
-AC_SUBST(enable_version_specific_runtime_libs)
 AC_SUBST(gcc_version_trigger)
 AC_SUBST(gcc_version)
 AC_SUBST(tooldir)
@@ -2010,7 +2005,6 @@ AC_SUBST(gxx_include_dir)
 AC_SUBST(libstdcxx_incdir)
 
 # Build module lists & subconfigure args.
-AC_SUBST(build_subdir)
 AC_SUBST(build_configargs)
 AC_SUBST(configure_build_modules)
 AC_SUBST(all_build_modules)
@@ -2018,20 +2012,10 @@ AC_SUBST(all_build_modules)
 # Host module lists & subconfigure args.
 AC_SUBST(host_configargs)
 AC_SUBST(configdirs)
-AC_SUBST(configure_host_modules)
-AC_SUBST(all_host_modules)
-AC_SUBST(check_host_modules)
-AC_SUBST(install_host_modules)
-AC_SUBST(install_host_modules_nogcc)
 
 # Target module lists & subconfigure args.
-AC_SUBST(target_subdir)
 AC_SUBST(target_configargs)
 AC_SUBST(target_configdirs)
-AC_SUBST(configure_target_modules)
-AC_SUBST(all_target_modules)
-AC_SUBST(check_target_modules)
-AC_SUBST(install_target_modules)
 
 # Build tools.
 AC_SUBST(BISON)
@@ -2054,6 +2038,7 @@ NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
 AC_SUBST(CC)
 AC_SUBST(CXX)
 AC_SUBST(CFLAGS)
+AC_SUBST(CFLAGS_FOR_BUILD)
 AC_SUBST(CXXFLAGS)
 AC_SUBST(DEFAULT_YACC)
 AC_SUBST(DEFAULT_LEX)
@@ -2117,4 +2102,37 @@ fi
 MAINT=$MAINTAINER_MODE_TRUE
 AC_SUBST(MAINT)dnl
 
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+  vax-*-*)
+    case ${GCC} in
+      yes) stage1_cflags="-g -Wa,-J" ;;
+      *) stage1_cflags="-g -J" ;;
+    esac ;;
+  powerpc-*-darwin*)
+    # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+    # sources; use -no-cpp-precomp to get to GNU cpp.
+    # Apple's GCC has bugs in designated initializer handling, so disable
+    # that too.
+    stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+    ;;
+esac
+AC_SUBST(stage1_cflags)
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+AC_ARG_ENABLE(werror,
+[  --enable-werror         enable -Werror in bootstrap stage2 and later], [],
+[enable_werror=yes])
+case ${enable_werror} in
+  yes) stage2_werror_flag="--enable-werror-always" ;;
+  *) stage2_werror_flag="" ;;
+esac
+AC_SUBST(stage2_werror_flag)
+
 AC_OUTPUT(Makefile)