X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=.Sanitize;h=e8405a23d51d7bf029faee994d6f049712cdc62e;hb=3306c363e316b852b3d931d444a2711a61ca4c96;hp=2f1197c964e67c38e1688ae55f50fe371bee8edf;hpb=d012a90792923ccc4a3a89e314608fc3a39f76e1;p=deliverable%2Fbinutils-gdb.git

diff --git a/.Sanitize b/.Sanitize
index 2f1197c964..e8405a23d5 100644
--- a/.Sanitize
+++ b/.Sanitize
@@ -1,3 +1,34 @@
+########################
+#
+#	 H    H  EEEEEE Y     Y  !!
+#	 H    H  E       Y   Y   !!
+#	 H    H  E        Y Y    !!
+#	 H    H  E         Y     !!
+#	 HHHHHH  EEEEE     Y     !!
+#	 H    H  E         Y     !!
+#	 H    H  E         Y     !!
+#	 H    H  E         Y
+#	 H    H  EEEEEE    Y     !!
+#
+# YO!  READ ME!!!!!!!!!
+# If you're about to add a file or directory which isn't checked out as part
+# of every module in devo (e.g., if "cvs co gas+utils" won't get it, or if
+# "cvs co gcc" won't get it), then don't, Don't, DON'T add it to the regular
+# things-to-keep or things-to-lose sections.  Instead, add it to the setting
+# of keep_these_too or lose_these_too before those variables are rescanned
+# to check for the existence of the items listed in them.
+#
+# Otherwise, somebody will check out some package that doesn't include your
+# new file, and will get warnings from Sanitize when everything is really
+# okay.  You don't want to get people in the habit of ignoring complaints from
+# Sanitize, do you?  No, I didn't think so.
+#
+# If you do add a file to the regular things-to-keep section, don't forget
+# to add the corresponding entry to the devo-support entry (or whatever) in
+# the modules file.
+#
+########################
+
 # .Sanitize for devo.
 
 # Each directory to survive its way into a release will need a file
@@ -15,7 +46,22 @@
 
 Do-first:
 
-cygnus_files="release release-info build-all.mk COPYING.NEWLIB"
+keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
+	bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
+	examples expect fileutils flex
+	gas gcc gdb gdbm gdbtest glob gprof grep grez groff
+	include install.sh ispell
+	ld libg++ libgcc libgloss libiberty libio librx libstdc++
+	m4 make mmalloc move-if-change newlib opcodes
+	pagas patch prms rcs readline sed send-pr shellutils sim textutils
+	texinfo tgas utils uudecode wdiff xiberty
+	configure.bat makeall.bat winsup
+	ctax gls goonix guile guile-docs libguile slib
+	mpw-README mpw-configure mpw-config.in mpw-build.in"
+
+lose_these_too="${lose_these_too} testsuite"
+
+cygnus_files="release release-info build-all.mk test-build.mk COPYING.NEWLIB"
 
 if ( echo $* | grep keep\-cygnus > /dev/null) ; then
 	keep_these_too="${keep_these_too} ${cygnus_files}"
@@ -23,95 +69,78 @@ else
 	lose_these_too="${lose_these_too} ${cygnus_files}"
 fi
 
-mpw_files="mpw-README mpw-configure mpw-config.in mpw-build.in ChangeLog.mpw"
+gdbtk_files="tcl tk"
+
+if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
+	lose_these_too="${lose_these_too} ${gdbtk_files}"
+	if [ -n "${verbose}" ] ; then
+		echo Deleting ${gdbtk_files}
+	fi
+else
+	keep_these_too="${keep_these_too} ${gdbtk_files}"
+	if [ -n "${verbose}" ] ; then
+		echo Keeping ${gdbtk_files}
+	fi
+fi
+
+# This is for newlib net releases.
+newlib_file="COPYING.NEWLIB"
 
-if ( echo $* | grep keep\-mpw > /dev/null) ; then
-	keep_these_too="${keep_these_too} ${mpw_files}"
+if (echo $* | grep keep\-newlib > /dev/null) ; then
+	if (echo $* | grep -v keep\-cygnus > /dev/null) ; then
+		keep_these_too="${keep_these_too} ${newlib_file}"
+		lose_these_too="`echo ${lose_these_too} | sed -e s/${newlib_file}//`"
+	fi
 else
-	lose_these_too="${lose_these_too} ${mpw_files}"
+	true; # Let keep-cygnus handle it.
 fi
 
+# This top-level directory is special.  We often check out only subsets
+# of this directory, and complaining about directories or files we didn't
+# check out just gets obnoxious.
+
+list="`(for i in ${keep_these_too}; do echo $i ; done) | sort -u`"
+keep_these_too=
+
+for file in $list ; do
+	if [ -r $file ] || [ -d $file ] ; then
+		keep_these_too="${keep_these_too} $file"
+	fi
+done
+
+list="`(for i in ${lose_these_too}; do echo $i ; done) | sort -u` "
+lose_these_too=
+
+for file in $list ; do
+	if [ -r $file ] || [ -d $file ] ; then
+		lose_these_too="${lose_these_too} $file"
+	fi
+done
+
 # All files listed between the "Things-to-keep:" line and the
 # "Do-last:" line will be kept.  All other files will be removed.
 # Directories listed in this section will have their own Sanitize
 # called.  Directories not listed will be removed in their entirety
 # with rm -rf.
 
+# ??? It is debatable whether cfg-*.in belongs in Things-to-keep or
+# keep_these_too.  If someone feels strongly about it, please move them.
+
 Things-to-keep:
 
-.cvsignore
 COPYING
 COPYING.LIB
-CYGNUS
 ChangeLog
 Makefile.in
 README
-autoconf
-bfd
-binutils
-byacc
 config
+cfg-ml-com.in
+cfg-ml-pos.in
 config.guess
 config.sub
 configure
 configure.in
-cvs
-deja-gnu
-dejagnu
-diff
-dosrel
-dvips
-emacs
-emacs19
 etc
-examples
-expect
-fileutils
-flex
-gas
-gcc
-gdb
-gdbm
-gdbtest
-glob
-gprof
-grep
-groff
-include
-install.sh
-ispell
-ld
-libg++
-libgcc
-libgloss
-libiberty
-libio
-librx
-m4
-make
-mmalloc
-move-if-change
-newlib
-opcodes
-pagas
-patch
-prms
-rcs
-readline
-sed
-send-pr
-shellutils
-sim
-tcl
-textutils
-tk
-test-build.mk
-texinfo
-tgas
-utils
-uudecode
-wdiff
-xiberty
 
 Things-to-lose:
 
@@ -121,6 +150,9 @@ Things-to-lose:
 
 Do-last:
 
+# Don't try to clean directories here, as the 'mv' command will fail.
+# Also, grep fails on NFS mounted directories.
+
 if ( echo $* | egrep verbose > /dev/null ) ; then
 	verbose=true
 else
@@ -142,8 +174,6 @@ if [ -n "${verbose}" ] ; then
 	echo Thawing away the \"chill\"...
 fi
 
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
 if ( echo $* | grep keep\-chill > /dev/null ) ; then
 	for i in * ; do
 		if test ! -d $i && (grep sanitize-chill $i > /dev/null) ; then
@@ -172,27 +202,190 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Removing traces of \"mpw\"...
+	echo Processing \"arc\"...
 fi
 
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
+arc_files="config.sub configure.in cfg-ml-com.in"
+
+if ( echo $* | grep keep\-arc > /dev/null ) ; then
+	for i in $arc_files ; do
+		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping arc stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"arc\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+if [ -n "${verbose}" ] ; then
+	echo Processing \"jaguar\"...
+fi
+
+jaguar_files="config.sub configure.in cfg-ml-com.in"
+
+if ( echo $* | grep keep\-jaguar > /dev/null ) ; then
+	for i in $jaguar_files ; do
+		if test ! -d $i && (grep sanitize-jaguar $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping jaguar stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-jaguar $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"jaguar\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-jaguar/,/end-\sanitize\-jaguar/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+psion_files="config.sub configure.in"
+
+if ( echo $* | grep keep\-psion > /dev/null ) ; then
+	for i in $psion_files; do
+		if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping psion stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"psion\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-psion/,/end-\sanitize\-psion/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+rce_files="config.sub"
+
+if ( echo $* | grep keep\-rce > /dev/null ) ; then
+	for i in $rce_files ; do
+		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping rce stuff in $i
+			fi
+		fi
+	done
+else
+	for i in $rce_files ; do
+		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"rce\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+sh3e_files="ChangeLog cfg-ml-com.in"
+if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
+	for i in $sh3e_files ; do
+		if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping sh3e stuff in $i
+			fi
+		fi
+	done
+else
+	for i in $sh3e_files ; do
+		if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"sh3e\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-sh3e/,/end-\sanitize\-sh3e/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+	echo Catering to RMS by removing traces of \"gdbtk\"...
+	if [ -n "${verbose}" ] ; then
+		echo Removing traces of \"gdbtk\" from Makefile.in...
+	fi
+	cp Makefile.in new
+	sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+	if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+		if [ -n "${verbose}" ] ; then
+			echo Caching Makefile.in in .Recover...
+		fi
+		mv Makefile.in .Recover
+	fi
+	mv new Makefile.in
+fi
+
+if ( echo $* | grep keep\-gm > /dev/null ) ; then
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping mpw stuff in $i
+				echo Keeping gm stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"mpw\" from $i...
+				echo Removing traces of \"gm\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-mpw/,/end-\sanitize\-mpw/d' < $i > new
+			sed '/start\-sanitize\-gm/,/end-\sanitize\-gm/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -204,9 +397,11 @@ else
 	done
 fi
 
+# Do this check LAST!
 for i in * ; do
 	if test ! -d $i && (grep sanitize $i > /dev/null) ; then
 		echo '***' Some mentions of Sanitize are still left in $i! 1>&2
+		exit 1
 	fi
 done