X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=configure;h=e969e12b9e80e02c2c4938c844992635f9dac1f4;hb=a0f171c8693166cc4e5441a1d3a9bf3452f98e47;hp=a2572a3449a814430c9d37ff7adfa1a2e8297d1c;hpb=0827f9a64f165682062f2dbf37579d797bb01f9d;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure b/configure
index a2572a3449..e969e12b9e 100755
--- a/configure
+++ b/configure
@@ -634,6 +634,7 @@ target_configargs
 host_configargs
 build_configargs
 BUILD_CONFIG
+LDFLAGS_FOR_TARGET
 CXXFLAGS_FOR_TARGET
 CFLAGS_FOR_TARGET
 DEBUG_PREFIX_CFLAGS_FOR_TARGET
@@ -3175,29 +3176,6 @@ case "${target}" in
   *-*-darwin*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  *-*-dragonfly*)
-    ;;
-  *-*-freebsd*)
-    # Skip some stuff that's unsupported on some FreeBSD configurations.
-    case "${target}" in
-      i*86-*-*) ;;
-      alpha*-*-*) ;;
-      x86_64-*-*) ;;
-      *)
-	noconfigdirs="$noconfigdirs ${libgcj}"
-	;;
-    esac
-    ;;
-  *-*-netbsd*)
-    # Skip some stuff that's unsupported on some NetBSD configurations.
-    case "${target}" in
-      i*86-*-netbsdelf*) ;;
-      arm*-*-netbsdelf*) ;;
-      *)
-	noconfigdirs="$noconfigdirs ${libgcj}"
-	;;
-    esac
-    ;;
   *-*-netware*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -3213,27 +3191,12 @@ case "${target}" in
   *-*-vxworks*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  alpha*-dec-osf*)
-    ;;
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  alpha*-*-linux*)
-    ;;
-  alpha*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  sh-*-linux*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   arm-wince-pe)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  arm-*-elf* | arm*-*-eabi* )
-    noconfigdirs="$noconfigdirs target-libffi"
-    ;;
-  arm*-*-linux-gnueabi)
-    ;;
   arm*-*-symbianelf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -3249,39 +3212,25 @@ case "${target}" in
 	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
     esac
     ;;
-  frv-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   hppa*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
     # the kernel only at this point and has no libc, and thus no
     # headers, crt*.o, etc., all of which are needed by these.
-    noconfigdirs="$noconfigdirs target-zlib"
-    ;;
-  hppa*-*-linux*)
+    unsupported_languages="$unsupported_languages java"
     ;;
-  hppa*64*-*-*)
+  hppa*64*-*-hpux*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   hppa*-hp-hpux11*)
     ;;
-  hppa*-*-*)
+  hppa*-*-hpux*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  ia64*-*-elf*)
-    ;;
-  ia64*-**-hpux*)
-    ;;
   ia64*-*-*vms*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  i[3456789]86-*-elf)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  i[3456789]86-*-linux*)
-    ;;
   i[3456789]86-w64-mingw*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -3291,20 +3240,6 @@ case "${target}" in
   x86_64-*-mingw*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  *-*-cygwin*)
-    ;;
-  i[3456789]86-*-interix* )
-    ;;
-  i[3456789]86-*-solaris2*)
-    ;;
-  m32r-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  m68k-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  m68*-*-* | fido-*-*)
-    ;;
   mmix-*-*)
     noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
     ;;
@@ -3312,11 +3247,6 @@ case "${target}" in
     # copied from rs6000-*-* entry
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
-    ;;
   rs6000-*-aix*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -3327,38 +3257,116 @@ case "${target}" in
     # <oldham@codesourcery.com>
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  mips*-*-linux*)
+  *-*-lynxos*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+esac
+
+# Default libgloss CPU subdirectory.
+libgloss_dir="$target_cpu"
+
+case "${target}" in
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    libgloss_dir=wince
+    ;;
+  arm*-*-*)
+    libgloss_dir=arm
+    ;;
+  cris-*-* | crisv32-*-*)
+    libgloss_dir=cris
+    ;;
+  hppa*-*-*)
+    libgloss_dir=pa
+    ;;
+  i[3456789]86-*-*)
+    libgloss_dir=i386
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    libgloss_dir=m68hc11
+    ;;
+  m68*-*-* | fido-*-*)
+    libgloss_dir=m68k
     ;;
   mips*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    libgloss_dir=mips
     ;;
-  sh-*-* | sh64-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+  powerpc*-*-*)
+    libgloss_dir=rs6000
     ;;
-  sparc-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+  sparc*-*-*)
+    libgloss_dir=sparc
     ;;
-  sparc64-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+  alpha*-dec-osf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
+  i[3456789]86-*-linux*)
+    # This section makes it possible to build newlib natively on linux.
+    # If we are using a cross compiler then don't configure newlib.
+    if test x${is_cross_compiler} != xno ; then
+      noconfigdirs="$noconfigdirs target-newlib"
+    fi
+    noconfigdirs="$noconfigdirs target-libgloss"
+    # If we are not using a cross compiler, do configure newlib.
+    # Note however, that newlib will only be configured in this situation
+    # if the --with-newlib option has been given, because otherwise
+    # 'target-newlib' will appear in skipdirs.
+    ;;
+  i[3456789]86-*-rdos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sh*-*-pe|mips*-*-pe|arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sparc-*-sunos4*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-aix*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-beos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-chorusos)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-dragonfly*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-lynxos*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  *-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+  *-*-mingw*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netbsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-uclinux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
 esac
 
-# Default libgloss CPU subdirectory.
-libgloss_dir="$target_cpu"
-
 case "${target}" in
   *-*-chorusos)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
@@ -3377,10 +3385,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
   *-*-dragonfly*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-freebsd*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
 	&& test -f /usr/local/include/gmp.h; then
       with_gmp=/usr/local
@@ -3391,81 +3397,45 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-netbsd*)
-    # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda"
+    noconfigdirs="$noconfigdirs target-rda"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
-    # newlib is not 64 bit ready.
     # gas doesn't generate exception information.
-    noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gas ld"
     ;;
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
-  alpha*-*-linux*)
-    # newlib is not 64 bit ready
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  am33_2.0-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
-  sh-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
-    noconfigdirs="$noconfigdirs target-newlib"
-    libgloss_dir=wince
     ;;
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  arm-*-coff)
-    libgloss_dir=arm
-    ;;
-  arm-*-elf* | arm*-*-eabi* )
-    libgloss_dir=arm
-    ;;
-  arm*-*-linux-gnueabi)
-    case ${with_newlib} in
-      no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    esac
-    libgloss_dir=arm
-    ;;
-  arm*-*-symbianelf*)
-    libgloss_dir=arm
-    ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   arm-*-riscix*)
     noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
-  avr-*-*)
-    ;;
-  bfin-*-*)
-    ;;
   c4x-*-* | tic4x-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
@@ -3475,13 +3445,6 @@ case "${target}" in
   cr16-*-*)
     noconfigdirs="$noconfigdirs gdb"
     ;;
-  cris-*-* | crisv32-*-*)
-    case "${target}" in
-      *-*-linux*)
-	noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
-    esac
-    libgloss_dir=cris
-    ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
@@ -3491,8 +3454,6 @@ case "${target}" in
   fr30-*-elf*)
     noconfigdirs="$noconfigdirs gdb"
     ;;
-  frv-*-*)
-    ;;
   moxie-*-*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
@@ -3517,7 +3478,6 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld"
     ;;
   hppa*-*-pro*)
-    libgloss_dir=pa
     ;;
   hppa*-*-*)
     noconfigdirs="$noconfigdirs ld"
@@ -3537,30 +3497,10 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
     ;;
-  i[3456789]86-*-coff | i[3456789]86-*-elf)
-    libgloss_dir=i386
-    ;;
-  i[3456789]86-*-linux*)
-    # This section makes it possible to build newlib natively on linux.
-    # If we are using a cross compiler then don't configure newlib.
-    if test x${is_cross_compiler} != xno ; then
-      noconfigdirs="$noconfigdirs target-newlib"
-    fi
-    noconfigdirs="$noconfigdirs target-libgloss"
-    # If we are not using a cross compiler, do configure newlib.
-    # Note however, that newlib will only be configured in this situation
-    # if the --with-newlib option has been given, because otherwise
-    # 'target-newlib' will appear in skipdirs.
-    ;;
   i[3456789]86-w64-mingw*)
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
     ;;
   i[3456789]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs target-libgloss target-newlib"
     ;;
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
@@ -3572,8 +3512,6 @@ case "${target}" in
       echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
     ;;
-  i[3456789]86-*-interix* )
-    ;;
   i[3456789]86-*-pe)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
@@ -3585,27 +3523,17 @@ case "${target}" in
   i[3456789]86-*-sco*)
     noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
-  i[3456789]86-*-solaris2*)
+  i[3456789]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-sysv4*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   i[3456789]86-*-rdos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    ;;
-  m32r-*-*)
-    ;;
-  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    libgloss_dir=m68hc11
-    ;;
-  m68k-*-elf*)
-    ;;
-  m68*-*-* | fido-*-*)
-    libgloss_dir=m68k
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   mmix-*-*)
     noconfigdirs="$noconfigdirs gdb"
@@ -3615,7 +3543,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe*)
     target_configdirs="$target_configdirs target-winsup"
@@ -3626,22 +3554,15 @@ case "${target}" in
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
     noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
-    libgloss_dir=rs6000
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    ;;
-  powerpc-*-eabi)
-    libgloss_dir=rs6000
-    ;;
-  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
-    libgloss_dir=rs6000
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   rs6000-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib gprof"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof"
@@ -3656,7 +3577,6 @@ case "${target}" in
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
     fi
-    libgloss_dir=mips
     ;;
   mips*-*-irix5*)
     noconfigdirs="$noconfigdirs gprof target-libgloss"
@@ -3668,11 +3588,9 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   mips*-*-*)
     noconfigdirs="$noconfigdirs gprof"
-    libgloss_dir=mips
     ;;
   sh-*-* | sh64-*-*)
     case "${target}" in
@@ -3682,43 +3600,23 @@ case "${target}" in
          noconfigdirs="$noconfigdirs target-libgloss" ;;
     esac
     ;;
-  sparclet-*-aout* | sparc86x-*-*)
-    libgloss_dir=sparc
-    ;;
-  sparc-*-elf*)
-    ;;
-  sparc64-*-elf*)
-    libgloss_dir=sparc
-    ;;
-  sparclite-*-*)
-    libgloss_dir=sparc
-    ;;
   sparc-*-sunos4*)
-    if test x${is_cross_compiler} != xno ; then
-           noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    else
+    if test x${is_cross_compiler} = xno ; then
            use_gnu_ld=no
     fi
     ;;
-  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
-    ;;
   tic6x-*-*)
     noconfigdirs="$noconfigdirs gdb sim"
     ;;
+  tilepro-*-* | tilegx-*-*)
+    noconfigdirs="$noconfigdirs sim"
+    ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
     ;;
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
-  *-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
-  *-*-*)
-    ;;
 esac
 
 # If we aren't building newlib, then don't build libgloss, since libgloss
@@ -6731,6 +6629,8 @@ if test "x$CXXFLAGS_FOR_TARGET" = x; then
 fi
 
 
+
+
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
 # the named directory are copied to $(tooldir)/sys-include.
 if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
@@ -6926,14 +6826,6 @@ if test x${with_stabs} = x ; then
   esac
 fi
 
-# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
-# them automatically.
-case "${host}" in
-  hppa*64*-*-hpux11*)
-    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
-    ;;
-esac
-
 # Some systems (e.g., one of the i386-aix systems the gas testers are
 # using) don't handle "\$" correctly, so don't use it here.
 tooldir='${exec_prefix}'/${target_noncanonical}
@@ -6977,34 +6869,6 @@ case $we_are_ok in
 esac
 rm -f conftest*
 
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
-  sparc-sun-solaris2*)
-      CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
-      if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
-          could_use=
-          test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
-          if test -d /opt/cygnus/bin ; then
-              if test "$could_use" = "" ; then
-                  could_use="/opt/cygnus/bin"
-              else
-                  could_use="$could_use or /opt/cygnus/bin"
-              fi
-          fi
-        if test "$could_use" = "" ; then
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc.  You should change your PATH or CC "
-            echo "variable and rerun configure."
-        else
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc, when you should use the C compiler from"
-            echo "$could_use.  You should change your"
-            echo "PATH or CC variable and rerun configure."
-        fi
-      fi
-  ;;
-esac
-
 # Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;