X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=configure.in;h=5ee69c3dedaf1c87f4ac977240bd15fa453341b2;hb=766de354a88c47321e39facce5c1b37e88e68f40;hp=5a453a7f9658e0ca500d6964ed0c756166406a4a;hpb=580217119e6aec769367a0c1a67e5f4e6852fce1;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.in b/configure.in
index 5a453a7f96..5ee69c3ded 100644
--- a/configure.in
+++ b/configure.in
@@ -26,32 +26,33 @@
 #
 host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
 
+if [ "${enable_gdbgui}" = "yes" ] ; then
+	host_libs="${host_libs} libgui"
+fi
+
 # these tools are built for the host environment
 #
 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
 	    prms send-pr gprof gdbtest tgas etc expect dejagnu sim
-            m4 autoconf ispell grep diff rcs cvs dosutils fileutils shellutils
-	    textutils wdiff find emacs uudecode hello tar gzip indent
-	    recode release"
+            m4 autoconf ispell grep diff rcs cvs fileutils shellutils
+	    textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
+	    recode release sed utils"
 
 
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
 #
-target_libs="libm xiberty newlib libio libg++"
+target_libs="libm xiberty libgloss newlib libio librx libstdc++ libg++"
 
-## start-sanitize-chill
-target_libs="${target_libs} chill chillrt"
-## end-sanitize-chill
 
 # these tools are built using the target libs, and are intended to run only
-# in the target environment.  we currently have none.
+# in the target environment
 #
 # note: any program that *uses* libraries that are in the "target_libs"
 # list belongs in this list.  those programs are also very likely
 # candidates for the "native_only" list which follows
 #
-target_tools="groff"
+target_tools="examples groff"
 
 ################################################################################
 
@@ -63,64 +64,134 @@ target_tools="groff"
 
 # directories to be built in the native environment only
 #
-native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
-             ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff 
-	     gprof"
+native_only="autoconf cvs emacs emacs19 fileutils find grep groff gzip hello
+	     indent ispell m4 rcs recode sed shellutils tar textutils gash
+	     uudecode wdiff gprof"
 
 # directories to be built in a cross environment only
 #
-cross_only="xiberty newlib"
+cross_only="xiberty libgloss newlib"
 
 ## All tools belong in one of the four categories, and are assigned above
+## We assign ${configdirs} this way to remove all embedded newlines.  This
+## is important because configure will choke if they ever get through.
 #
-configdirs="${host_libs} ${host_tools} ${target_libs} ${target_tools}"
+configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
 
 ################################################################################
 
 srctrigger=move-if-change
 srcname="gnu development package"
 
+# This gets set non-empty for some net releases of packages.
+appdirs=""
+
 # per-host:
 
+# Work in distributions that contain no compiler tools, like Autoconf.
+if [ -d ${srcdir}/config ]; then
 case "${host}" in
-  m68k-hp-hpux)		  host_makefile_frag=config/mh-hp300 ;;
+  m68k-hp-hpux*)	  host_makefile_frag=config/mh-hp300 ;;
   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
-  m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
   m88k-dg-dgux*)	  host_makefile_frag=config/mh-dgux ;;
-  mips-dec-ultrix*)       host_makefile_frag=config/mh-decstation ;;
-  mips-sgi-irix4*)        host_makefile_frag=config/mh-irix4 ;;
-  mips-sgi-irix3*)        host_makefile_frag=config/mh-sysv ;;
-  mips-*-sysv*)		  host_makefile_frag=config/mh-riscos ;;
-  i[34]86-ncr-sysv4*)     host_makefile_frag=config/mh-ncr3000 ;;
-  i[34]86-*-sco*)         host_makefile_frag=config/mh-sco ;;
-  i[34]86-*-isc*)	  host_makefile_frag=config/mh-sysv ;;
-  i[34]86-*-linux)        host_makefile_frag=config/mh-linux ;;
-  i[34]86-*-solaris2*)    host_makefile_frag=config/mh-sysv4 ;;
-  i[34]86-*-aix*)	  host_makefile_frag=config/mh-aix386 ;;
+  m88k-harris-cxux*)	  host_makefile_frag=config/mh-cxux ;;
+  m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
+  mips*-dec-ultrix*)      host_makefile_frag=config/mh-decstation ;;
+  mips*-sgi-irix5*)       host_makefile_frag=config/mh-irix5 ;;
+  mips*-sgi-irix4*)       host_makefile_frag=config/mh-irix4 ;;
+  mips*-sgi-irix3*)       host_makefile_frag=config/mh-sysv ;;
+  mips*-*-sysv4*)	  host_makefile_frag=config/mh-sysv4 ;;
+  mips*-*-sysv*)	  host_makefile_frag=config/mh-riscos ;;
+  i[345]86-ncr-sysv4.3)   host_makefile_frag=config/mh-ncrsvr43 ;;
+  i[345]86-ncr-sysv4*)    host_makefile_frag=config/mh-ncr3000 ;;
+  i[345]86-*-sco*)        host_makefile_frag=config/mh-sco ;;
+  i[345]86-*-isc*)	  host_makefile_frag=config/mh-sysv ;;
+  i[345]86-*-linux*)      host_makefile_frag=config/mh-linux ;;
+  i[345]86-*-solaris2*)   host_makefile_frag=config/mh-sysv4 ;;
+  i[345]86-*-aix*)	  host_makefile_frag=config/mh-aix386 ;;
+  i[345]86-*-go32*)	  host_makefile_frag=config/mh-go32 ;;
   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
   *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
   m68k-sun-*)		  host_makefile_frag=config/mh-sun3 ;;
   *-sun-*)		  host_makefile_frag=config/mh-sun ;;
-  *-hp-hpux)              host_makefile_frag=config/mh-hpux ;;
+  *-hp-hpux[78]*)         host_makefile_frag=config/mh-hpux8 ;;
+  *-hp-hpux*)             host_makefile_frag=config/mh-hpux ;;
   *-*-hiux*)              host_makefile_frag=config/mh-hpux ;;
+  rs6000-*-lynxos*)	  host_makefile_frag=config/mh-lynxrs6k ;;
   *-*-lynxos*)	  	  host_makefile_frag=config/mh-lynxos ;;
   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 esac
+fi
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+  sparc-sun-solaris2*)
+      if [ "`/usr/bin/which ${CC-cc}`" = "/usr/ucb/cc" ] ; then
+          could_use=
+          [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
+          if [ -d /opt/cygnus/bin ] ; then
+              if [ "$could_use" == "" ] ; then
+                  could_use="/opt/cygnus/bin"
+              else
+                  could_use="$could_use or /opt/cygnus/bin"
+              fi
+          fi
+        if [ "$could_use" = "" ] ; then
+            echo "Warning: compilation may fail because you're using"
+            echo "/usr/ucb/cc.  You should change your PATH or CC "
+            echo "variable and rerun configure."
+        else
+            echo "Warning: compilation may fail because you're using"
+            echo "/usr/ucb/cc, when you should use the C compiler from"
+            echo "$could_use.  You should change your"
+            echo "PATH or CC variable and rerun configure."
+        fi
+      fi
+  ;;
+esac
+
+# We default to --with-shared on platforms where -fpic is meaningless.
+# Well, we don't yet, but we will.
+if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
+  case "${target}" in
+    alpha-dec-osf*)	enable_shared=yes ;;
+    mips-sgi-irix5*)	enable_shared=yes ;;
+    *)			enable_shared=no ;;
+  esac
+fi
+
+if [ x${enable_shared} = xyes ]; then
+  waugh=
+  case "${host}" in
+    hppa*)		waugh=config/mh-papic ;;
+    i[345]86-*)		waugh=config/mh-x86pic ;;
+    *)			waugh=config/mh-${host_cpu}pic ;;
+  esac
+  if [ -f ${srcdir}/${waugh} ]; then
+    if [ -n "${host_makefile_frag}" ] ; then
+      cat ${srcdir}/${host_makefile_frag} > mh-frag
+      cat ${srcdir}/${waugh} >> mh-frag
+      host_makefile_frag=mh-frag
+    else
+      host_makefile_frag=${waugh}
+    fi
+  fi
+fi
 
 # per-target:
 
+case "${target}" in
+  v810*)		target_makefile_frag=config/mt-v810 ;;
+esac
+
 gasdir=gas
 use_gnu_ld=
 use_gnu_as=
 
-case "${target}" in
-  hppa*-hp-hpux)	  target_makefile_frag=config/mt-hppa ;;
-esac
-
 # some tools are so dependent upon X11 that if we're not building with X, 
 # it's not even worth trying to configure, much less build, that tool.
 
@@ -128,108 +199,314 @@ case ${with_x} in
   yes | "")  # the default value for this tree is that X11 is available
 	;;
   no)
-    	configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
+    	configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
 	;;
   *)
     	echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
     	;;
 esac
 
-
-
-# some tools are only suitable for building in a "native" situation.
+# Some tools are only suitable for building in a "native" situation.
 # Those are added when we have a host==target configuration.  For cross
 # toolchains, we add some directories that should only be useful in a
 # cross-compiler.
 
+is_cross_compiler=
+
 if [ x"${host}" = x"${target}" ] ; then
 	# when doing a native toolchain, don't build the targets
 	# that are in the 'cross only' list
 	for i in ${cross_only} ; do
-	  configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+	  configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
 	done
+	is_cross_compiler=no
 else
 	# similarly, don't build the targets in the 'native only' 
 	# list when building a cross compiler
 	for i in ${native_only} ; do
-	  configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+	  configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
 	done
+	is_cross_compiler=yes
 fi	
 
+copy_dirs=
+
+# Handle --with-headers=XXX.  The contents of the named directory are
+# copied to $(tooldir)/include.
+if [ x"${with_headers}" != x ]; then
+  if [ x${is_cross_compiler} = xno ]; then
+    echo 1>&2 '***' --with-headers is only supported when cross compiling
+    exit 1
+  fi
+  case "${exec_prefixoption}" in
+  "") x=${prefix} ;;
+  *) x=${exec_prefix} ;;
+  esac
+  copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/include"
+fi
+
+# Handle --with-libs=XXX.  Multiple directories are permitted.  The
+# contents are copied to $(tooldir)/lib.
+if [ x"${with_libs}" != x ]; then
+  if [ x${is_cross_compiler} = xno ]; then
+    echo 1>&2 '***' --with-libs is only supported when cross compiling
+    exit 1
+  fi
+  # Copy the libraries in reverse order, so that files in the first named
+  # library override files in subsequent libraries.
+  case "${exec_prefixoption}" in
+  "") x=${prefix} ;;
+  *) x=${exec_prefix} ;;
+  esac
+  for l in ${with_libs}; do
+    copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+  done
+fi
+
+# If both --with-headers and --with-libs are specified, default to
+# --without-newlib.
+if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
+  if [ x"${with_newlib}" = x ]; then
+    with_newlib=no
+  fi
+fi
+
+# Recognize --without-newlib.
+if [ x${with_newlib} = xno ]; then
+  configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'`
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while [ $# != 0 ]; do
+  if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
+    :
+  else
+    echo Copying $1 to $2
+
+    # Use the install script to create the directory and all required
+    # parent directories.
+    if [ -d $2 ]; then
+      :
+    else
+      echo >config.temp
+      ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
+    fi
+
+    # Copy the directory, assuming we have tar.
+    # FIXME: Should we use B in the second tar?  Not all systems support it.
+    (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+    # It is the responsibility of the user to correctly adjust all
+    # symlinks.  If somebody can figure out how to handle them correctly
+    # here, feel free to add the code.
+
+    echo $1 > $2/COPIED
+  fi
+  shift; shift
+done
 
-# remove more programs from consideration, based on the host or 
+# Configure extra directories which are host specific
+
+case "${host}" in
+  i[345]86-*-go32*)
+		  configdirs="$configdirs dosrel" ;;
+esac
+
+# Remove more programs from consideration, based on the host or 
 # target this usually means that a port of the program doesn't
 # exist yet.
 
+noconfigdirs=""
+
 case "${host}" in
-  alpha-dec-osf1)
-    configdirs=`echo ${configdirs} | sed -e 's/gdb//'`
+  i[345]86-*-netbsd*)
+    noconfigdirs="tk fileutils"
     ;;
-  i[34]86-*-go32)
-    configdirs=`echo ${configdirs} | sed -e 's/tcl//;s/expect//;s/deja-gnu//'`
-    configdirs=`echo ${configdirs} | sed -e 's/make//;s/texinfo//;s/bison//'`
-    configdirs=`echo ${configdirs} | sed -e 's/patch//;s/flex//;s/byacc//'`
-    configdirs=`echo ${configdirs} | sed -e 's/send-pr//;s/gprof//'`
-    configdirs=`echo ${configdirs} | sed -e 's/uudecode//;s/dejagnu//'`
-    configdirs=`echo ${configdirs} | sed -e 's/diff//'`
+  i[345]86-*-vsta)
+    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+    ;;
+  i[345]86-*-go32)
+    noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
     ;;
 esac
 
+
 case "${target}" in
-  alpha-dec-osf1)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //'`
-    configdirs=`echo ${configdirs} | sed -e 's/gdb//;s/emacs//;s/fileutils//'`
-    configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//;s/libio//'`
-    ;;	
-  h8300*-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
-## start-sanitize-chill
-    configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
-## end-sanitize-chill
+  *-*-netware)
+    noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
+    ;;
+  alpha-dec-osf*)
+    # ld works, but does not support shared libraries.  emacs doesn't
+    # work.  newlib is not 64 bit ready.  I'm not sure about emacs19,
+    # fileutils or grep.
+    noconfigdirs="$noconfigdirs ld emacs emacs19 fileutils grep newlib"
+    ;;
+  alpha*-*-*)
+    # newlib is not 64 bit ready
+    noconfigdirs="$noconfigdirs newlib"
     ;;
+# start-sanitize-arc
+  arc-*-*)
+    # Leave g++ for later.
+    noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+    ;;
+# end-sanitize-arc
+# start-sanitize-psion
+  arm-*-pe*)
+    # Leave g++ for later.
+    noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+    ;;
+# end-sanitize-psion
+  arm-*-*)
+    noconfigdirs="$noconfigdirs ld"
+    ;;
+  h8300*-*-* | \
   h8500-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
-## start-sanitize-chill
-    configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
-## end-sanitize-chill
+    noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
     ;;
-  hppa*-*-osf)
+  hppa*-*-*elf*)
     # Do configure ld/binutils/gas for this case.
     ;;
   hppa*-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas /pagas /;s/shellutils//'`
-    gasdir=pagas
+    # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
+    # cc is gcc, and on any system a user should be able to link cc to
+    # whatever they want.  FIXME, emacs emacs19).
+    case "${CC}" in
+	"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
+        *) ;;
+    esac
+    noconfigdirs="$noconfigdirs ld shellutils"
     ;;
-  i[34]86-*-go32)
+  i[345]86-*-go32)
     # add the go32 support tools to the list
+    # but don't build gdb
     configdirs=`echo go32 ${configdirs}`
+    noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
+    ;;
+  i[345]86-*-sco*)
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
+  i[345]86-*-solaris2*)
+    # The linker does static linking correctly, but the Solaris C library
+    # has bugs such that some important functions won't work when statically
+    # linked.  (See man pages for getpwuid, for example.)
+    noconfigdirs="$noconfigdirs ld"
+    ;;
+  i[345]86-*-sysv4*)
+    # The SYSV4 C compiler doesn't handle Emacs correctly
+    case "${CC}" in
+	"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
+        *) ;;
+    esac
+    # but that's okay since emacs doesn't work anyway
+    noconfigdirs="$noconfigdirs emacs emacs19"
+    ;;
+  powerpc-*-aix*)
+    # copied from rs6000-*-* entry
+    noconfigdirs="$noconfigdirs gas ld binutils gprof textutils cvs"
+    ;;
+  rs6000-*-lynxos*)
+    # a gcc built textutils will cause the linker to hang on 'join'
+    # The CVS server code doesn't work on the RS/6000
+    # Newlib makes problems for libg++ in crosses.
+    noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
+    use_gnu_ld=no
+    use_gnu_as=no
     ;;
   rs6000-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //;s/gprof//'`
+    # a gcc built textutils will cause the linker to hang on 'join'
+    noconfigdirs="$noconfigdirs gas ld binutils gprof textutils"
+    ;;
+  m68k-apollo-*)
+    noconfigdirs="$noconfigdirs ld binutils gprof"
+    ;;
+  mips*-*-irix5*)
+    # The GNU linker does not support shared libraries.
+    # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
+    noconfigdirs="$noconfigdirs ld gprof emacs"
+    ;;
+  mips*-dec-bsd*)
+    noconfigdirs="$noconfigdirs gprof"
     ;;
-  mips-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+  mips*-*-bsd*)
+    noconfigdirs="$noconfigdirs gprof ld"
+    ;;
+  mips*-*-*)
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
+  romp-*-*)
+    noconfigdirs="bfd binutils ld gas opcodes"
     ;;
   sh-*-*)
     case "${host}" in
-      i[34]86-*-go32) ;; # don't add gprof
+      i[345]86-*-vsta) ;; # don't add gprof back in
+      *) configdirs=`echo gprof ${configdirs}` ;;
+      i[345]86-*-go32) ;; # don't add gprof back in
       *) configdirs=`echo gprof ${configdirs}` ;;
     esac
     ;;
   sparc-*-sunos4*)
-    use_gnu_ld=no
+    if [ x${is_cross_compiler} != xno ] ; then
+           noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl"
+    else
+           use_gnu_ld=no
+    fi
     ;;
-  i[34]86-*-sco*)
-    configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+  vax-*-vms)
+    noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
     ;;
-  *-*-sysv4)
-    use_gnu_ld=no
-    ;;
-  *-*-vms)
-    configdirs=`echo ${configdirs} | sed -e 's/bfd//;s/ld//;s/binutils//'`
+  vax-*-*)
+    noconfigdirs="$noconfigdirs newlib"
     ;;
+  *-*-lynxos*)
+     # Newlib makes problems for libg++ in crosses.
+     noconfigdirs="$noconfigdirs newlib"
+     ;;    
 esac
 
+# Remove the entries in $noconfigdirs from $configdirs.  If we have the
+# source for them, add them to $notsupp.
+notsupp=""
+for dir in . $noconfigdirs ; do
+  if [ $dir != . ]  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+    if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
+      notsupp="$notsupp $dir"
+    fi
+  fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+  # If $appdirs is non-empty, at least one of those directories must still
+  # be configured, or we error out.  (E.g., if the gas release supports a
+  # specified target in some subdirs but not the gas subdir, we shouldn't
+  # pretend that all is well.)
+  if [ -n "$appdirs" ]; then
+    for dir in $appdirs ; do
+      if [ -r $dir/Makefile.in ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1 ; then
+	appdirs=""
+	break
+      fi
+    done
+    if [ -n "$appdirs" ]; then
+      echo "*** This configuration is not supported by this package." 1>&2
+      exit 1
+    fi
+  fi
+  # Okay, some application will build, or we don't care to check.  Still
+  # notify of subdirs not getting built.
+  echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+  echo "    ${notsupp}" 1>&2
+  echo "    (Any other directories should still work fine.)" 1>&2
+fi
+
 # Set with_gnu_as and with_gnu_ld as appropriate.
 #
 # This is done by determining whether or not the appropriate directory
@@ -244,19 +521,27 @@ esac
 # --without-gnu-ld options for the configure script.
 
 if [ x${use_gnu_as} = x ] ; then
-  if [ x${with_gnu_as} != xno ] && echo ${configdirs} | grep "${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
+  if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
     with_gnu_as=yes
     withoptions="$withoptions --with-gnu-as"
   fi
 fi
 
 if [ x${use_gnu_ld} = x ] ; then
-  if [ x${with_gnu_ld} != xno ] && echo ${configdirs} | grep ld > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
+  if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
     with_gnu_ld=yes
     withoptions="$withoptions --with-gnu-ld"
   fi
 fi
 
+if [ x${enable_shared} = xyes ]; then
+  case "${target}" in
+    hppa*)		target_makefile_frag=config/mt-papic ;;
+    i[345]86-*)		target_makefile_frag=config/mt-x86pic ;;
+    *)			target_makefile_frag=config/mt-${target_cpu}pic ;;
+  esac
+fi
+
 #
 # Local Variables:
 # fill-column: 131