X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=configure.in;h=a4781564cec27dd8a11995870a74c53c2b7f680a;hb=9175bfc0f5e45004a3be439b00f479c11f3074ee;hp=646a1c9d39215cd64d3179e0bf9b2da5d0e8a599;hpb=1047cb916409c1554001243ccc3d2232c83f4a2b;p=deliverable%2Fbinutils-gdb.git diff --git a/configure.in b/configure.in index 646a1c9d39..a4781564ce 100644 --- a/configure.in +++ b/configure.in @@ -23,6 +23,9 @@ AC_PREREQ(2.13) AC_CANONICAL_SYSTEM AC_ARG_PROGRAM +# Get 'install' or 'install-sh' and its variants. +AC_PROG_INSTALL + sinclude(config/acx.m4) ### we might need to use some other shell than /bin/sh for running subshells @@ -136,7 +139,7 @@ libgcj="target-libffi \ # these libraries are built for the target environment, and are built after # the host libraries and the host tools (which may be a cross compiler) # -target_libs="target-libiberty \ +target_libraries="target-libiberty \ target-libgloss \ target-newlib \ target-libstdc++-v3 \ @@ -144,10 +147,10 @@ target_libs="target-libiberty \ ${libgcj} \ target-libobjc" -# these tools are built using the target libs, and are intended to run only -# in the target environment +# these tools are built using the target libraries, and are intended to +# run only in the target environment # -# note: any program that *uses* libraries that are in the "target_libs" +# note: any program that *uses* libraries that are in the "target_libraries" # list belongs in this list. those programs are also very likely # candidates for the "native_only" list which follows # @@ -162,7 +165,7 @@ target_tools="target-examples target-groff target-gperf target-rda" ## ${target_configdirs} is directories we build using the target tools. # configdirs=`echo ${host_libs} ${host_tools}` -target_configdirs=`echo ${target_libs} ${target_tools}` +target_configdirs=`echo ${target_libraries} ${target_tools}` # Only make build modules if build != host. # This should be done more generally, but at the moment it doesn't matter. @@ -189,27 +192,9 @@ else is_cross_compiler=yes fi -# Find the build and target subdirs. +# Find the build and target subdir names. GCC_TOPLEV_SUBDIRS -if test ! -d ${target_subdir} ; then - if mkdir ${target_subdir} ; then true - else - echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2 - exit 1 - fi -fi - -if test x"${build_alias}" != x"${host}" ; then - if test ! -d ${build_subdir} ; then - if mkdir ${build_subdir} ; then true - else - echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2 - exit 1 - fi - fi -fi - # Skipdirs are removed silently. skipdirs= # Noconfigdirs are removed loudly. @@ -396,6 +381,9 @@ case "${target}" in # newlib is not 64 bit ready noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; sh-*-linux*) noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" ;; @@ -454,22 +442,22 @@ case "${target}" in noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib" ;; cris-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" ;; d10v-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" ;; d30v-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs ${libgcj} gdb" ;; fr30-*-elf*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs ${libgcj} gdb" ;; frv-*-*) noconfigdirs="$noconfigdirs ${libgcj}" ;; h8300*-*-*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c" ;; h8500-*-*) noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c" @@ -493,6 +481,9 @@ case "${target}" in # build on HP-UX 10.20. noconfigdirs="$noconfigdirs ld shellutils ${libgcj}" ;; + i960-*-*) + noconfigdirs="$noconfigdirs ${libgcj} gdb" + ;; ia64*-*-elf*) # No gdb support yet. noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb" @@ -570,6 +561,9 @@ case "${target}" in i[[3456789]]86-*-beos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" ;; + m32r-*-*) + noconfigdirs="$noconfigdirs ${libgcj} gdb" + ;; m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" ;; @@ -703,6 +697,9 @@ case "${target}" in vax-*-*) noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" ;; + xtensa-*-*) + noconfigdirs="$noconfigdirs ${libgcj}" + ;; ip2k-*-*) noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" ;; @@ -749,24 +746,24 @@ enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e # First scan to see if an enabled language requires some other language. # We assume that a given config-lang.in will list all the language # front ends it requires, even if some are required indirectly. -for lang in ${srcdir}/gcc/*/config-lang.in .. -do - case $lang in +for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in ..) ;; # The odd quoting in the next line works around # an apparent bug in bash 1.12 on linux. ${srcdir}/gcc/[[*]]/config-lang.in) ;; *) - lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang` - this_lang_requires=`sed -n -e 's,^lang_requires=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_requires=\([[^ ]]*\).*$,\1,p' $lang` - for other in $this_lang_requires - do + # From the config-lang.in, get $language, $lang_requires + language= + lang_requires= + . ${lang_frag} + for other in ${lang_requires} ; do case ,${enable_languages}, in *,$other,*) ;; *,all,*) ;; - *,$lang_alias,*) - echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2 - enable_languages="$enable_languages,$other" + *,$language,*) + echo " \`$other' language required by \`$language'; enabling" 1>&2 + enable_languages="${enable_languages},${other}" ;; esac done @@ -774,35 +771,44 @@ do esac done -subdirs= -for lang in ${srcdir}/gcc/*/config-lang.in .. -do - case $lang in +for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in ..) ;; # The odd quoting in the next line works around # an apparent bug in bash 1.12 on linux. ${srcdir}/gcc/[[*]]/config-lang.in) ;; *) - lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^ ]]*\).*$,\1,p' $lang` - this_lang_libs=`sed -n -e 's,^target_libs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^target_libs=\([[^ ]]*\).*$,\1,p' $lang` - this_lang_dirs=`sed -n -e 's,^lang_dirs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_dirs=\([[^ ]]*\).*$,\1,p' $lang` - build_by_default=`sed -n -e 's,^build_by_default=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^build_by_default=\([[^ ]]*\).*$,\1,p' $lang` - if test "x$lang_alias" = x - then - echo "$lang doesn't set \$language." 1>&2 + # From the config-lang.in, get $language, $target_libs, + # $lang_dirs, and $build_by_default + language= + target_libs= + lang_dirs= + build_by_default= + . ${lang_frag} + if test "x$language" = x ; then + echo "${lang_frag} doesn't set \$language." 1>&2 exit 1 fi - case ${build_by_default},${enable_languages}, in - *,$lang_alias,*) add_this_lang=yes ;; - no,*) add_this_lang=no ;; - *,all,*) add_this_lang=yes ;; + case ,${enable_languages}, in + *,${language},*) + # Language was explicitly selected; include it. + add_this_lang=yes + ;; + *,all,*) + # 'all' was selected; include 'default' languages. + case ${build_by_default} in + no) add_this_lang=no ;; + *) add_this_lang=yes ;; + esac + ;; *) add_this_lang=no ;; esac - if test x"${add_this_lang}" = xyes; then - eval target_libs='"$target_libs "'\"$this_lang_libs\" - else - eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\" - fi + case ${add_this_lang} in + no) + # Remove language-dependent dirs. + eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" + ;; + esac ;; esac done @@ -1908,7 +1914,7 @@ fi GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' # Don't use libstdc++-v3's flags to configure/build itself. -libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' +libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' if test "x${CXX_FOR_TARGET+set}" = xset; then