X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=0aeab4e725a4205c3323fac06c762b7d7b20ca4d;hb=aad09e51eeb6ec68029271642a7528ffc08fee81;hp=8372ace4a0d936181b0dee19e17e100ad127e7d7;hpb=14d21785885c018611efd8aa75a5c11eaea29087;p=deliverable%2Flinux.git

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8372ace4a0d9..0aeab4e725a4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,7 @@
 menu "Graphics support"
 
 source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
 
 config FB
 	tristate "Support for frame buffer devices"
@@ -90,6 +91,11 @@ config FB_CFB_IMAGEBLIT
 	  blitting. This is used by drivers that don't provide their own
 	  (accelerated) version.
 
+config FB_DEFERRED_IO
+	bool
+	depends on FB
+	default y
+
 config FB_SVGALIB
 	tristate
 	depends on FB
@@ -191,7 +197,7 @@ config FB_ARMCLCD
 
 	  If you want to compile this as a module (=code which can be
 	  inserted into and removed from the running kernel), say M
-	  here and read <file:Documentation/modules.txt>.  The module
+	  here and read <file:Documentation/kbuild/modules.txt>.  The module
 	  will be called amba-clcd.
 
 choice
@@ -389,14 +395,17 @@ config FB_ARC
 
 config FB_ATARI
 	bool "Atari native chipset support"
-	depends on (FB = y) && ATARI && BROKEN
+	depends on (FB = y) && ATARI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
 	help
 	  This is the frame buffer device driver for the builtin graphics
 	  chipset found in Ataris.
 
 config FB_OF
 	bool "Open Firmware frame buffer device support"
-	depends on (FB = y) && (PPC64 || PPC_OF)
+	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -548,6 +557,20 @@ config FB_IMAC
 	help
 	  This is the frame buffer device driver for the Intel-based Macintosh
 
+config FB_HECUBA
+       tristate "Hecuba board support"
+       depends on FB && X86 && MMU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select FB_DEFERRED_IO
+       help
+         This enables support for the Hecuba board. This driver was tested
+         with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+         interface (8 bit data, 4 bit control). If you anticpate using
+         this driver, say Y or M; otherwise say N. You must specify the
+         GPIO IO address to be used for setting control and data.
+
 config FB_HGA
 	tristate "Hercules mono graphics support"
 	depends on FB && X86
@@ -1380,6 +1403,32 @@ config FB_LEO
 	  This is the frame buffer device driver for the SBUS-based Sun ZX
 	  (leo) frame buffer cards.
 
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
 config FB_PCI
 	bool "PCI framebuffers"
 	depends on (FB = y) && PCI && SPARC
@@ -1491,7 +1540,7 @@ config FB_PXA
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called pxafb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 
@@ -1544,7 +1593,7 @@ config FB_W100
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called w100fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 
@@ -1561,7 +1610,7 @@ config FB_S3C2410
 	  This driver is also available as a module ( = code which can be
 	  inserted and removed from the running kernel whenever you want). The
 	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/modules.txt>.
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
 
 	  If unsure, say N.
 config FB_S3C2410_DEBUG