X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=gas%2Fconfigure;h=c1282edadbc7666e632e2953ad520cf7c47304ac;hb=9596feeafe1f8d192ca4b99c6c491630eaa855e0;hp=828f9c0ffa350cabbe6df7cdf61a5d4a3eed0b36;hpb=0aa5d42641ee478b4c96ab57ce77c798999b4833;p=deliverable%2Fbinutils-gdb.git diff --git a/gas/configure b/gas/configure index 828f9c0ffa..c1282edadb 100755 --- a/gas/configure +++ b/gas/configure @@ -21,6 +21,8 @@ ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" +ac_help="$ac_help + --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --enable-bfd-assembler use BFD back end for writing object files" ac_help="$ac_help @@ -53,7 +55,6 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= -sitefile= srcdir= target=NONE verbose= @@ -168,7 +169,6 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -339,11 +339,6 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -509,16 +504,12 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi -else - CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -556,6 +547,68 @@ else ac_n= ac_c='\c' ac_t= fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:552: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:585: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes ac_aux_dir= @@ -605,7 +658,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:609: checking host system type" >&5 +echo "configure:662: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -626,7 +679,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:630: checking target system type" >&5 +echo "configure:683: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -644,7 +697,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:648: checking build system type" >&5 +echo "configure:701: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -666,414 +719,80 @@ test "$host_alias" != "$target_alias" && NONENONEs,x,x, && program_prefix=${target_alias}- - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:683: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:726: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi + IFS="$ac_save_ifs" fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:736: checking whether build environment is sane" >&5 -# Just in case -sleep 1 -echo timestamp > conftestfile -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` - fi - if test "$*" != "X $srcdir/configure conftestfile" \ - && test "$*" != "X conftestfile $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { echo "configure: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" 1>&2; exit 1; } - fi - - test "$2" = conftestfile - ) -then - # Ok. - : -else - { echo "configure: error: newly created file is older than distributed files! -Check your system clock" 1>&2; exit 1; } fi -rm -f conftest* -echo "$ac_t""yes" 1>&6 -if test "$program_transform_name" = s,x,x,; then - program_transform_name= +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g -EOF_SED - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed + echo "$ac_t""no" 1>&6 fi -test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:793: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:756: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - eval ac_cv_prog_make_${ac_make}_set=no + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi fi -rm -f conftestmake fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - -PACKAGE=gas - -VERSION=2.9.5 - -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } -fi -cat >> confdefs.h <> confdefs.h <&6 -echo "configure:839: checking for working aclocal" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (aclocal --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal - echo "$ac_t""found" 1>&6 -else - ACLOCAL="$missing_dir/missing aclocal" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:852: checking for working autoconf" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf - echo "$ac_t""found" 1>&6 -else - AUTOCONF="$missing_dir/missing autoconf" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:865: checking for working automake" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (automake --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake - echo "$ac_t""found" 1>&6 -else - AUTOMAKE="$missing_dir/missing automake" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:878: checking for working autoheader" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader - echo "$ac_t""found" 1>&6 -else - AUTOHEADER="$missing_dir/missing autoheader" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:891: checking for working makeinfo" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo - echo "$ac_t""found" 1>&6 -else - MAKEINFO="$missing_dir/missing makeinfo" - echo "$ac_t""missing" 1>&6 -fi - - - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi - -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi - -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:977: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1007: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1037: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi @@ -1084,7 +803,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1088: checking for $ac_word" >&5 +echo "configure:807: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1116,7 +835,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1120: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:839: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1127,12 +846,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1131 "configure" +#line 850 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1158,12 +877,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1162: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:881: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1167: checking whether we are using GNU C" >&5 +echo "configure:886: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1172,7 +891,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1191,7 +910,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1195: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:914: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1222,21 +941,353 @@ else fi fi -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1238: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in +echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 +echo "configure:946: checking for POSIXized ISC" >&5 +if test -d /etc/conf/kconfig.d && + grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 +then + echo "$ac_t""yes" 1>&6 + ISC=yes # If later tests want to check for ISC. + cat >> confdefs.h <<\EOF +#define _POSIX_SOURCE 1 +EOF + + if test "$GCC" = yes; then + CC="$CC -posix" + else + CC="$CC -Xp" + fi +else + echo "$ac_t""no" 1>&6 + ISC= +fi + + +BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:980: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:1033: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:1090: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + +PACKAGE=gas + +VERSION=${BFD_VERSION} + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <> confdefs.h <&6 +echo "configure:1136: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:1149: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:1162: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:1175: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:1188: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + + +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} +case $enableval in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_shared=yes +fi + +# Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} +case $enableval in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_static=yes +fi + +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case $enableval in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_fast_install=yes +fi + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 +echo "configure:1283: checking for ld used by GCC" >&5 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' @@ -1252,135 +1303,643 @@ echo "configure:1238: checking for ld used by GCC" >&5 ac_prog=ld ;; *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 +echo "configure:1313: checking for GNU ld" >&5 +else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 +echo "configure:1316: checking for non-GNU ld" >&5 +fi +if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi +fi + +LD="$lt_cv_path_LD" +if test -n "$LD"; then + echo "$ac_t""$LD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } +echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 +echo "configure:1351: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + lt_cv_prog_gnu_ld=yes +else + lt_cv_prog_gnu_ld=no +fi +fi + +echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + +echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +echo "configure:1368: checking for $LD option to reload object files" >&5 +if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_ld_reload_flag='-r' +fi + +echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" + +echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 +echo "configure:1380: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi +fi + +NM="$lt_cv_path_NM" +echo "$ac_t""$NM" 1>&6 + +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:1418: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +echo "configure:1439: checking how to recognise dependant libraries" >&5 +if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [regex]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* |pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.012) + lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd* ) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac -elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1262: checking for GNU ld" >&5 + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + +newsos6) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + esac + ;; +esac + +fi + +echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method + +echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +echo "configure:1603: checking for object suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1265: checking for non-GNU ld" >&5 + rm -f conftest* +echo 'int i = 1;' > conftest.$ac_ext +if { (eval echo configure:1609: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } +fi +rm -f conftest* fi -if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then + +echo "$ac_t""$ac_cv_objext" 1>&6 +OBJEXT=$ac_cv_objext +ac_objext=$ac_cv_objext + + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1629: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:1639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +echo "configure:1672: checking for ${ac_tool_prefix}file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac fi + break fi done IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + echo "$ac_t""no" 1>&6 fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo $ac_n "checking for file""... $ac_c" 1>&6 +echo "configure:1734: checking for file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac fi -LD="$ac_cv_path_LD" -if test -n "$LD"; then - echo "$ac_t""$LD" 1>&6 +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi -test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } -echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1300: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1805: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - ac_cv_prog_gnu_ld=no + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 fi -echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1837: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + RANLIB=":" +fi +fi -echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1316: checking for BSD-compatible nm" >&5 -if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then +# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1872: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -NM="$ac_cv_path_NM" -echo "$ac_t""$NM" 1>&6 -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1352: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then +if test -z "$ac_cv_prog_STRIP"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1904: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - ac_cv_prog_LN_S=ln + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="strip" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi +else + STRIP=":" +fi +fi -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" # Check whether --enable-libtool-lock or --disable-libtool-lock was given. @@ -1392,14 +1951,25 @@ fi test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi + +test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" +test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" + # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1401 "configure"' > conftest.$ac_ext - if { (eval echo configure:1402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - case "`/usr/bin/file conftest.o`" in + echo '#line 1971 "configure"' > conftest.$ac_ext + if { (eval echo configure:1972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -1419,19 +1989,27 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1423: checking whether the C compiler needs -belf" >&5 +echo "configure:1993: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - cat > conftest.$ac_ext < conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1441,6 +2019,13 @@ else lt_cv_cc_needs_belf=no fi rm -f conftest* + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 @@ -1504,12 +2089,14 @@ rm -f confcache # Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ +AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ +AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ +objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ +deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } # Reload cache, that may have been modified by ltconfig @@ -1523,7 +2110,7 @@ fi # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -1532,6 +2119,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' # clobbered by the next message. exec 5>>./config.log + + + + + user_bfd_gas= # Check whether --enable-bfd-assembler or --disable-bfd-assembler was given. @@ -1565,7 +2157,7 @@ fi using_cgen=no -build_warnings="-W -Wall" +build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" # Check whether --enable-build-warnings or --disable-build-warnings was given. if test "${enable_build_warnings+set}" = set; then enableval="$enable_build_warnings" @@ -1655,11 +2247,14 @@ for this_target in $target $canon_targets ; do armb*) cpu_type=arm endian=little ;; armv*l) cpu_type=arm endian=little ;; armv*b) cpu_type=arm endian=big ;; + xscale*) cpu_type=arm endian=little ;; strongarm*) cpu_type=arm endian=little ;; thumb*) cpu_type=arm endian=little ;; hppa*) cpu_type=hppa ;; - i[456]86) cpu_type=i386 ;; + i[3456]86) cpu_type=i386 arch=i386;; + x86_64) cpu_type=i386 arch=x86_64;; ia64) cpu_type=ia64 ;; + m6811|m6812|m68hc12) cpu_type=m68hc11 ;; m680[012346]0) cpu_type=m68k ;; m68008) cpu_type=m68k ;; m683??) cpu_type=m68k ;; @@ -1669,9 +2264,13 @@ for this_target in $target $canon_targets ; do mips*) cpu_type=mips endian=big ;; pjl*) cpu_type=pj endian=little ;; pj*) cpu_type=pj endian=big ;; - powerpcle*) cpu_type=ppc endian=little ;; + powerpc*le*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; + s390x*) cpu_type=s390 arch=s390x ;; + s390*) cpu_type=s390 arch=s390 ;; + sh*le) cpu_type=sh endian=little ;; + sh*) cpu_type=sh endian=big ;; sparclite*) cpu_type=sparc arch=sparclite ;; sparclet*) cpu_type=sparc arch=sparclet ;; sparc64*) cpu_type=sparc arch=v9-64 ;; @@ -1691,6 +2290,7 @@ for this_target in $target $canon_targets ; do dev=no bfd_gas=no em=generic + mips_stabs_elf= # assign object format case ${generic_target} in @@ -1698,6 +2298,7 @@ for this_target in $target $canon_targets ; do a29k-amd-udi) fmt=coff ;; a29k-amd-ebmon) fmt=coff ;; a29k-nyu-sym1) fmt=coff ;; + a29k-*-rtems*) fmt=coff ;; a29k-*-vxworks*) fmt=coff ;; alpha*-*-*vms*) fmt=evax ;; @@ -1712,44 +2313,57 @@ for this_target in $target $canon_targets ; do arm-*-aout) fmt=aout ;; arm-*-coff | thumb-*-coff) fmt=coff ;; + arm-*-rtems | thumb-*-rtems) fmt=elf ;; arm-*-elf | thumb-*-elf) fmt=elf ;; arm*-*-conix*) fmt=elf ;; arm-*-linux*aout*) fmt=aout em=linux ;; - arm*-*-linux-gnu*) fmt=elf em=linux ;; - arm-*-netbsd*) fmt=aout em=nbsd ;; + arm*-*-linux-gnu* | arm*-*-uclinux*) + fmt=elf em=linux ;; + arm-*-netbsdelf*) fmt=elf em=nbsd ;; + arm-*-netbsd* | arm-*-openbsd*) fmt=aout em=nbsd ;; arm-*-oabi | thumb-*-oabi) fmt=elf ;; arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;; arm-*-wince) fmt=coff em=wince-pe ;; arm-*-pe | thumb-*-pe) fmt=coff em=pe ;; arm-*-riscix*) fmt=aout em=riscix ;; + arm-*-vxworks) fmt=coff ;; avr-*-*) fmt=elf bfd_gas=yes ;; + cris-*-*) fmt=multi bfd_gas=yes ;; + d10v-*-*) fmt=elf bfd_gas=yes ;; d30v-*-*) fmt=elf bfd_gas=yes ;; fr30-*-*) fmt=elf bfd_gas=yes ;; - hppa-*-linux-gnu*) fmt=elf em=linux ;; + hppa-*-linux-gnu*) case ${cpu} in + hppa*64*) + fmt=elf em=hppalinux64;; + hppa*) + fmt=elf em=linux;; + esac ;; hppa-*-*elf*) fmt=elf em=hppa ;; hppa-*-lites*) fmt=elf em=hppa ;; hppa-*-osf*) fmt=som em=hppa ;; hppa-*-rtems*) fmt=elf em=hppa ;; - hppa-*-hpux11*) em=hppa - case ${cpu} in + hppa-*-hpux11*) case ${cpu} in hppa*64*) - fmt=elf;; + fmt=elf em=hppa64 ;; hppa*) - fmt=som;; - esac - ;; + fmt=som em=hppa ;; + esac ;; hppa-*-hpux*) fmt=som em=hppa ;; hppa-*-mpeix*) fmt=som em=hppa ;; hppa-*-bsd*) fmt=som em=hppa ;; hppa-*-hiux*) fmt=som em=hppa ;; + h8300-*-rtems*) fmt=coff ;; h8300-*-coff) fmt=coff ;; + h8300-*-elf) fmt=elf ;; + h8500-*-rtems*) fmt=coff ;; + h8500-*-coff) fmt=coff ;; i370-*-elf* | i370-*-linux*) fmt=elf ;; i386-ibm-aix*) fmt=coff em=i386aix ;; @@ -1758,17 +2372,26 @@ for this_target in $target $canon_targets ; do i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;; i386-*-bsd*) fmt=aout em=386bsd ;; i386-*-netbsd0.8) fmt=aout em=386bsd ;; - i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;; + i386-*-netbsd*) em=nbsd bfd_gas=yes + case ${cpu} in + x86_64) fmt=elf ;; + *) case ${os} in + *elf*) fmt=elf ;; + *) fmt=aout ;; + esac + ;; + esac + ;; i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;; - i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;; + i386-*-linux*aout* | i386-*-linux*oldld) fmt=aout em=linux ;; i386-*-linux*coff*) fmt=coff em=linux ;; i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;; + x86_64-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;; i386-*-lynxos*) fmt=coff em=lynx ;; - i386-*-sysv4* | i386-*-solaris* | i386-*-elf) + i386-*-sysv[45]* | i386-*-solaris* | i386-*-elf) fmt=elf bfd_gas=yes ;; - i386-*-freebsdaout* | i386-*-freebsd12.* | i386-*-freebsd12) + i386-*-freebsdaout* | i386-*-freebsd[12].* | i386-*-freebsd[12]) fmt=aout em=386bsd ;; - i386-*-freebsd*) fmt=elf bfd_gas=yes ;; i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*) fmt=coff ;; i386-*-sco3.2v5*) fmt=elf @@ -1782,9 +2405,15 @@ EOF i386-*-sco3.2*) fmt=coff ;; i386-*-vsta) fmt=aout ;; i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*) - fmt=coff em=go32;; + fmt=coff em=go32 bfd_gas=yes + cat >> confdefs.h <<\EOF +#define STRICTCOFF 1 +EOF + + ;; i386-*-rtemself*) fmt=elf ;; - i386-*-rtems*) fmt=coff ;; + i386-*-rtemscoff*) fmt=coff ;; + i386-*-rtems*) fmt=elf ;; i386-*-gnu*) fmt=elf ;; i386-*-mach*) fmt=aout em=mach bfd_gas=yes ;; @@ -1796,6 +2425,10 @@ EOF i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;; i386-*-*nt*) fmt=coff em=pe bfd_gas=yes ;; i386-*-vxworks*) fmt=aout ;; + i386-*-chaos) fmt=elf ;; + i860-stardent-sysv4* | i860-stardent-elf*) + fmt=elf bfd_gas=yes endian=little + echo "configure: warning: GAS support for ${generic_target} is preliminary and a work in progress" 1>&2 ;; i960-*-bout) fmt=bout ;; i960-*-coff) fmt=coff em=ic960 ;; i960-*-rtems*) fmt=coff em=ic960 ;; @@ -1807,10 +2440,15 @@ EOF i960-*-elf*) fmt=elf ;; ia64-*-elf*) fmt=elf ;; + ia64-*-aix*) fmt=elf em=ia64aix ;; ia64-*-linux-gnu*) fmt=elf em=linux ;; + ia64-*-hpux*) fmt=elf em=hpux ;; + ia64-*-netbsd*) fmt=elf em=nbsd ;; m32r-*-*) fmt=elf bfd_gas=yes ;; + m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)fmt=elf bfd_gas=yes ;; + m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*) fmt=aout em=sun3 ;; m68k-motorola-sysv*) fmt=coff em=delta ;; @@ -1819,14 +2457,17 @@ EOF m68k-*-sysv4*) # must be before -sysv* fmt=elf em=svr4 ;; m68k-*-elf*) fmt=elf ;; - m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*) + m68k-*-coff | m68k-*-sysv* | m68k-*-rtemscoff*) fmt=coff ;; + m68k-*-rtems*) fmt=elf ;; m68k-*-hpux*) fmt=hp300 em=hp300 ;; m68k-*-linux*aout*) fmt=aout em=linux ;; m68k-*-linux-gnu*) fmt=elf em=linux ;; m68k-*-gnu*) fmt=elf ;; m68k-*-lynxos*) fmt=coff em=lynx ;; - m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;; + m68k-*-netbsdelf*) fmt=elf em=nbsd bfd_gas=yes ;; + m68k-*-netbsdaout* | m68k-*-netbsd*) + fmt=aout em=nbsd bfd_gas=yes ;; m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;; m68k-apple-aux*) fmt=coff em=aux ;; m68k-*-psos*) fmt=elf em=psos;; @@ -1838,7 +2479,6 @@ EOF mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;; # don't change em like *-*-bsd does - mips-dec-netbsd*) fmt=elf endian=little ;; mips-dec-openbsd*) fmt=elf endian=little ;; mips-dec-bsd*) fmt=aout endian=little ;; mips-sony-bsd*) fmt=ecoff ;; @@ -1846,24 +2486,23 @@ EOF mips-*-ultrix*) fmt=ecoff endian=little ;; mips-*-osf*) fmt=ecoff endian=little ;; mips-*-ecoff*) fmt=ecoff ;; - mips-*-ecoff*) fmt=ecoff ;; mips-*-pe*) fmt=coff endian=little em=pe ;; mips-*-irix6*) fmt=elf ;; mips-*-irix5*) fmt=elf ;; mips-*-irix*) fmt=ecoff ;; mips-*-lnews*) fmt=ecoff em=lnews ;; mips-*-riscos*) fmt=ecoff ;; + mips*-*-linux*) fmt=elf em=tmips mips_stabs_elf=y ;; + mips-*-sysv4*MP* | mips-*-gnu*) + fmt=elf em=tmips ;; mips-*-sysv*) fmt=ecoff ;; - mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*) + mips-*-elf* | mips-*-rtems* | mips-*-netbsd* | mips-*-openbsd*) fmt=elf ;; - mips-*-vxworks*) fmt=elf - cat >> confdefs.h <<\EOF -#define MIPS_STABS_ELF 1 -EOF - - ;; + mips-*-vxworks*) fmt=elf mips_stabs_elf=y ;; + mmix-*-*) fmt=elf bfd_gas=yes ;; mn10200-*-*) fmt=elf bfd_gas=yes ;; mn10300-*-*) fmt=elf bfd_gas=yes ;; + openrisc-*-*) fmt=elf bfd_gas=yes ;; pj*) fmt=elf ;; ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*) fmt=coff em=pe ;; @@ -1894,17 +2533,30 @@ EOF ppc-*-netware*) fmt=elf em=ppcnw ;; ppc-*-vxworks*) fmt=elf ;; + s390x-*-linux-gnu*) fmt=elf em=linux ;; + s390-*-linux-gnu*) fmt=elf em=linux ;; + + sh*-*-linux*) fmt=elf em=linux + case ${cpu} in + sh*eb) + endian=big ;; + sh*) + endian=little ;; + esac ;; + sh*-*-netbsdelf*) fmt=elf em=nbsd ;; sh-*-elf*) fmt=elf ;; - sh-*-coff*) fmt=coff ;; - sh-*-pe*) fmt=coff em=pe bfd_gas=yes;; + sh-*-coff*) fmt=coff bfd_gas=yes;; + sh-*-pe*) fmt=coff em=pe bfd_gas=yes endian=little ;; sh-*-rtemself*) fmt=elf ;; - sh-*-rtems*) fmt=coff ;; + sh-*-rtems*) fmt=coff bfd_gas=yes;; ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;; ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;; ns32k-pc532-openbsd*) fmt=aout em=nbsd532 ;; - sparc-*-rtems*) fmt=aout ;; + sparc-*-rtemsaout*) fmt=aout ;; + sparc-*-rtemself*) fmt=elf ;; + sparc-*-rtems*) fmt=elf ;; sparc-*-sunos4*) fmt=aout em=sun3 ;; sparc-*-aout | sparc*-*-vxworks*) fmt=aout em=sparcaout ;; @@ -1928,9 +2580,13 @@ EOF strongarm-*-coff) fmt=coff ;; strongarm-*-elf) fmt=elf ;; + xscale-*-coff) fmt=coff ;; + xscale-*-elf) fmt=elf ;; tic30-*-*aout*) fmt=aout bfd_gas=yes ;; tic30-*-*coff*) fmt=coff bfd_gas=yes ;; + tic54x-*-* | c54x*-*-*) + fmt=coff bfd_gas=yes need_libm=yes;; tic80-*-*) fmt=coff ;; v850-*-*) fmt=elf bfd_gas=yes ;; @@ -1941,14 +2597,16 @@ EOF fmt=aout ;; vax-*-vms) fmt=vms ;; + w65-*-*) fmt=coff ;; + + xstormy16-*-*) fmt=elf bfd_gas=yes ;; z8k-*-coff | z8k-*-sim) fmt=coff ;; - w65-*-*) fmt=coff ;; - *-*-aout | *-*-scout) fmt=aout ;; + *-*-freebsd*) fmt=elf em=freebsd bfd_gas=yes ;; *-*-nindy*) fmt=bout ;; *-*-bsd*) @@ -1978,6 +2636,13 @@ EOF fi fi + if test x${mips_stabs_elf} != x; then + cat >> confdefs.h <<\EOF +#define MIPS_STABS_ELF 1 +EOF + + fi + case ${cpu_type}-${fmt} in alpha*-*) bfd_gas=yes ;; arm-*) bfd_gas=yes ;; @@ -1986,9 +2651,11 @@ EOF ia64*-*) bfd_gas=yes ;; mips-*) bfd_gas=yes ;; ns32k-*) bfd_gas=yes ;; + pdp11-*) bfd_gas=yes ;; ppc-*) bfd_gas=yes ;; sparc-*) bfd_gas=yes ;; strongarm-*) bfd_gas=yes ;; + xscale-*) bfd_gas=yes ;; *-elf) bfd_gas=yes ;; *-ecoff) bfd_gas=yes ;; *-som) bfd_gas=yes ;; @@ -2023,7 +2690,7 @@ EOF # Any other special object files needed ? case ${cpu_type} in - fr30 | m32r) + fr30 | m32r | openrisc) using_cgen=yes ;; @@ -2051,7 +2718,7 @@ EOF fi ;; - sparc) + i386 | s390 | sparc) if test $this_target = $target ; then cat >> confdefs.h <&6 -echo "configure:2432: checking for $ac_word" >&5 +echo "configure:3112: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2458,7 +3138,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2462: checking for $ac_word" >&5 +echo "configure:3142: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2509,7 +3189,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2513: checking for $ac_word" >&5 +echo "configure:3193: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2541,7 +3221,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2545: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:3225: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2552,12 +3232,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2556 "configure" +#line 3236 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2583,12 +3263,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2587: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:3267: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2592: checking whether we are using GNU C" >&5 +echo "configure:3272: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2597,7 +3277,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3281: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2616,7 +3296,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2620: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:3300: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2653,7 +3333,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2657: checking for $ac_word" >&5 +echo "configure:3337: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2684,7 +3364,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2688: checking how to run the C preprocessor" >&5 +echo "configure:3368: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2699,13 +3379,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3389: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2716,13 +3396,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2733,13 +3413,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3423: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2769,7 +3449,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2773: checking for $ac_word" >&5 +echo "configure:3453: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2802,7 +3482,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2806: checking for $ac_word" >&5 +echo "configure:3486: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2836,7 +3516,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:2840: checking for yywrap in -l$ac_lib" >&5 +echo "configure:3520: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2844,7 +3524,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2878,7 +3558,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:2882: checking lex output file root" >&5 +echo "configure:3562: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2899,7 +3579,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:2903: checking whether yytext is a pointer" >&5 +echo "configure:3583: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2911,14 +3591,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -2940,35 +3620,44 @@ EOF fi -ALL_LINGUAS= -echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:2946: checking for POSIXized ISC" >&5 -if test -d /etc/conf/kconfig.d && - grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 -then - echo "$ac_t""yes" 1>&6 - ISC=yes # If later tests want to check for ISC. - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 -EOF - - if test "$GCC" = yes; then - CC="$CC -posix" - else - CC="$CC -Xp" - fi +ALL_LINGUAS="fr tr" +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3628: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 - ISC= fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2967: checking for ANSI C header files" >&5 +echo "configure:3656: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2976,7 +3665,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3669: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2993,7 +3682,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3011,7 +3700,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3032,7 +3721,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -3043,7 +3732,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:3047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -3067,12 +3756,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:3071: checking for working const" >&5 +echo "configure:3760: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -3142,21 +3831,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3146: checking for inline" >&5 +echo "configure:3835: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -3182,12 +3871,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:3186: checking for off_t" >&5 +echo "configure:3875: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3215,12 +3904,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:3219: checking for size_t" >&5 +echo "configure:3908: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3250,19 +3939,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3254: checking for working alloca.h" >&5 +echo "configure:3943: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3283,12 +3972,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3287: checking for alloca" >&5 +echo "configure:3976: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3348,12 +4037,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3352: checking whether alloca needs Cray hooks" >&5 +echo "configure:4041: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3382: checking for $ac_func" >&5 +echo "configure:4071: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3433,7 +4122,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3437: checking stack direction for C alloca" >&5 +echo "configure:4126: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3441,7 +4130,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3485,17 +4174,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3489: checking for $ac_hdr" >&5 +echo "configure:4178: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4188: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3524,12 +4213,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3528: checking for $ac_func" >&5 +echo "configure:4217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3577,7 +4266,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3581: checking for working mmap" >&5 +echo "configure:4270: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3585,7 +4274,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3753,17 +4442,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3757: checking for $ac_hdr" >&5 +echo "configure:4446: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3767: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4456: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3793,12 +4482,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3797: checking for $ac_func" >&5 +echo "configure:4486: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3850,12 +4539,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3854: checking for $ac_func" >&5 +echo "configure:4543: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3912,19 +4601,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3916: checking for LC_MESSAGES" >&5 +echo "configure:4605: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3945,7 +4634,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3949: checking whether NLS is requested" >&5 +echo "configure:4638: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3965,7 +4654,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3969: checking whether included gettext is requested" >&5 +echo "configure:4658: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3984,17 +4673,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3988: checking for libintl.h" >&5 +echo "configure:4677: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4687: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4011,19 +4700,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:4015: checking for gettext in libc" >&5 +echo "configure:4704: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:4027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -4039,7 +4728,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:4043: checking for bindtextdomain in -lintl" >&5 +echo "configure:4732: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4047,7 +4736,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4074,19 +4763,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:4078: checking for gettext in libintl" >&5 +echo "configure:4767: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -4114,7 +4803,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4118: checking for $ac_word" >&5 +echo "configure:4807: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4148,12 +4837,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4152: checking for $ac_func" >&5 +echo "configure:4841: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4203,7 +4892,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4207: checking for $ac_word" >&5 +echo "configure:4896: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4239,7 +4928,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4243: checking for $ac_word" >&5 +echo "configure:4932: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4271,7 +4960,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4311,7 +5000,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4315: checking for $ac_word" >&5 +echo "configure:5004: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4345,7 +5034,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4349: checking for $ac_word" >&5 +echo "configure:5038: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4381,7 +5070,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4385: checking for $ac_word" >&5 +echo "configure:5074: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4471,7 +5160,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4475: checking for catalogs to be installed" >&5 +echo "configure:5164: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -4499,17 +5188,17 @@ echo "configure:4475: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:4503: checking for linux/version.h" >&5 +echo "configure:5192: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4513: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4554,7 +5243,7 @@ fi l= - if test -d $srcdir/po; then + if test -f $srcdir/po/POTFILES.in; then test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then @@ -4572,7 +5261,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4576: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:5265: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4594,72 +5283,10 @@ fi MAINT=$MAINTAINER_MODE_TRUE -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:4599: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:4632: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4663: checking for executable suffix" >&5 +echo "configure:5290: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4669,10 +5296,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:4673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:5300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -4694,17 +5321,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4698: checking for $ac_hdr" >&5 +echo "configure:5325: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4708: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4734,7 +5361,7 @@ done # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6 -echo "configure:4738: checking whether compiling a cross-assembler" >&5 +echo "configure:5365: checking whether compiling a cross-assembler" >&5 if test "${host}" = "${target}"; then cross_gas=no else @@ -4749,19 +5376,19 @@ echo "$ac_t""$cross_gas" 1>&6 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:4753: checking for working alloca.h" >&5 +echo "configure:5380: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:4765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -4782,12 +5409,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:4786: checking for alloca" >&5 +echo "configure:5413: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4847,12 +5474,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4851: checking whether alloca needs Cray hooks" >&5 +echo "configure:5478: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4881: checking for $ac_func" >&5 +echo "configure:5508: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4932,7 +5559,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4936: checking stack direction for C alloca" >&5 +echo "configure:5563: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4940,7 +5567,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4981,21 +5608,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:4985: checking for inline" >&5 +echo "configure:5612: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -5025,12 +5652,12 @@ esac for ac_func in unlink remove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5029: checking for $ac_func" >&5 +echo "configure:5656: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5082,12 +5709,12 @@ done for ac_func in sbrk do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5086: checking for $ac_func" >&5 +echo "configure:5713: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5135,16 +5762,146 @@ fi done +# do we need the math library? +case "${need_libm}" in +yes) + LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32*) + # These system don't have libm + ;; +*-ncr-sysv4.3*) + echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6 +echo "configure:5776: checking for _mwvalidcheckl in -lmw" >&5 +ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lmw $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBM="-lmw" +else + echo "$ac_t""no" 1>&6 +fi + + echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 +echo "configure:5816: checking for main in -lm" >&5 +ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lm $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBM="$LIBM -lm" +else + echo "$ac_t""no" 1>&6 +fi + + ;; +*) + echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 +echo "configure:5854: checking for main in -lm" >&5 +ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lm $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBM="-lm" +else + echo "$ac_t""no" 1>&6 +fi + + ;; +esac + + + ;; +esac + # Some non-ANSI preprocessors botch requoting inside strings. That's bad # enough, but on some of those systems, the assert macro relies on requoting # working properly! echo $ac_n "checking for working assert macro""... $ac_c" 1>&6 -echo "configure:5143: checking for working assert macro" >&5 +echo "configure:5900: checking for working assert macro" >&5 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -5160,7 +5917,7 @@ assert (a == b ; return 0; } EOF -if { (eval echo configure:5164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_assert_ok=yes else @@ -5201,12 +5958,12 @@ gas_test_headers=" " echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6 -echo "configure:5205: checking whether declaration is required for strstr" >&5 +echo "configure:5962: checking whether declaration is required for strstr" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_strstr=no else @@ -5238,12 +5995,12 @@ fi echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6 -echo "configure:5242: checking whether declaration is required for malloc" >&5 +echo "configure:5999: checking whether declaration is required for malloc" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_malloc=no else @@ -5275,12 +6032,12 @@ fi echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6 -echo "configure:5279: checking whether declaration is required for free" >&5 +echo "configure:6036: checking whether declaration is required for free" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6052: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_free=no else @@ -5312,12 +6069,12 @@ fi echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6 -echo "configure:5316: checking whether declaration is required for sbrk" >&5 +echo "configure:6073: checking whether declaration is required for sbrk" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_sbrk=no else @@ -5349,12 +6106,12 @@ fi echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6 -echo "configure:5353: checking whether declaration is required for environ" >&5 +echo "configure:6110: checking whether declaration is required for environ" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_environ=no else @@ -5389,12 +6146,12 @@ fi # for it? echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6 -echo "configure:5393: checking whether declaration is required for errno" >&5 +echo "configure:6150: checking whether declaration is required for errno" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_errno=no else @@ -5579,6 +6336,7 @@ s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g +s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g @@ -5590,9 +6348,11 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g -s%@RANLIB@%$RANLIB%g -s%@CC@%$CC%g s%@LN_S@%$LN_S%g +s%@OBJEXT@%$OBJEXT%g +s%@EXEEXT@%$EXEEXT%g +s%@RANLIB@%$RANLIB%g +s%@STRIP@%$STRIP%g s%@LIBTOOL@%$LIBTOOL%g s%@WARN_CFLAGS@%$WARN_CFLAGS%g s%@GDBINIT@%$GDBINIT%g @@ -5635,7 +6395,7 @@ s%@l@%$l%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g -s%@EXEEXT@%$EXEEXT%g +s%@LIBM@%$LIBM%g CEOF EOF