X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=gas%2Fconfigure;h=da3f0e778f443d899221086f7d34c5230f580f62;hb=31dd3154f4a9cedea4ea9bb17b0fee33aa79a3e3;hp=5fa5da8a1693a6e98e4cd4765c12bcb81a05f3fd;hpb=e330299ed5eefaa74220b36b3258ef5804f5d9cd;p=deliverable%2Fbinutils-gdb.git diff --git a/gas/configure b/gas/configure index 5fa5da8a16..da3f0e778f 100755 --- a/gas/configure +++ b/gas/configure @@ -241,6 +241,155 @@ IFS=" $as_nl" $as_unset CDPATH + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. @@ -309,8 +458,9 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof BFDLIB OPCODES_LIB BFDVER_H ALL_OBJ_DEPS YACC LEX LEXLIB LEX_OUTPUT_ROOT CPP EGREP ALLOCA USE_NLS MSGFMT GMSGFMT XGETTEXT USE_INCLUDED_LIBINTL CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLDEPS INTLLIBS INTLOBJS POFILES POSUB INCLUDE_LOCALE_H GT_NO GT_YES MKINSTALLDIRS l MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP LIBTOOL SED FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S OBJDUMP ac_ct_OBJDUMP AR ac_ct_AR RANLIB ac_ct_RANLIB lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 WARN_CFLAGS NO_WERROR GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof OPCODES_LIB YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE ALLOCA LIBM datarootdir docdir htmldir pdfdir LIBOBJS LTLIBOBJS' ac_subst_files='' +ac_pwd=`pwd` # Initialize some variables set by options. ac_init_help= @@ -852,14 +1002,18 @@ Optional Features: --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes + --disable-largefile omit support for large files + --enable-shared[=PKGS] + build shared libraries [default=yes] + --enable-static[=PKGS] + build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) - --enable-bfd-assembler use BFD back end for writing object files - targets alternative target configurations besides the primary - --enable-commonbfdlib build shared BFD/opcodes/libiberty library - --enable-build-warnings Enable build-time compiler warnings if gcc is used + --enable-targets alternative target configurations besides the primary + --enable-checking enable run-time checks + --enable-werror treat compile warnings as errors + --enable-build-warnings enable build-time compiler warnings --disable-nls do not use Native Language Support --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer @@ -867,9 +1021,9 @@ Optional Features: Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both - --with-included-gettext use the GNU gettext library included here + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] Some influential environment variables: CC C compiler command @@ -971,7 +1125,7 @@ esac else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd "$ac_popdir" + cd $ac_popdir done fi @@ -1264,13 +1418,22 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + ac_cache_corrupted=: + else + { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +echo "$as_me: former value: \`$ac_old_val'" >&2;} + { echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. @@ -1287,6 +1450,8 @@ echo "$as_me: current value: $ac_new_val" >&2;} fi done if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 @@ -1315,6 +1480,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + @@ -1735,11 +1904,13 @@ fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { (exit 1); exit 1; }; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ @@ -1825,11 +1996,13 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 +{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } + { (exit 77); exit 77; }; }; } fi ac_exeext=$ac_cv_exeext @@ -1854,13 +2027,15 @@ if test "$cross_compiling" != yes; then if test "$cross_compiling" = maybe; then cross_compiling=yes else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. + { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { (exit 1); exit 1; }; }; } fi fi fi @@ -1898,11 +2073,13 @@ for ac_file in conftest.exe conftest conftest.*; do esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link + { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { (exit 1); exit 1; }; }; } fi rm -f conftest$ac_cv_exeext @@ -1949,11 +2126,13 @@ else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 +{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { (exit 1); exit 1; }; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext @@ -1994,7 +2173,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2052,7 +2232,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2168,7 +2349,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2222,7 +2404,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2267,7 +2450,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2311,7 +2495,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2389,7 +2574,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2443,7 +2629,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2491,6 +2678,7 @@ am__api_version="1.9" # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then @@ -2524,8 +2712,18 @@ case $as_dir/ in # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done @@ -2534,15 +2732,16 @@ case $as_dir/ in esac done +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi @@ -3064,562 +3263,183 @@ fi -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi; - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - lt_cv_path_LD="$LD" # Let the user override the test with a path. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - lt_cv_prog_gnu_ld=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + CC=$ac_ct_CC else - lt_cv_ld_reload_flag='-r' + CC="$ac_cv_prog_CC" fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi - -NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 -echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [regex]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* |pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.012) - lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd* | kfreebsd*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - case $host_cpu in - hppa*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - esac - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd* | knetbsd*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - ;; - -newsos6) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - esac - ;; -esac +done +done fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method - - - - -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + CC=$ac_ct_CC else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 + CC="$ac_cv_prog_CC" +fi -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi fi - - fi - ;; -esac - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else + ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do @@ -3627,36 +3447,54 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi fi fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -3665,40 +3503,40 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" + test -n "$CC" && break + done fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -3707,7 +3545,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" + ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -3716,166 +3554,58 @@ done fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done + test -n "$ac_ct_CC" && break done - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + CC=$ac_ct_CC fi - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" fi -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" - - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" -test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" +test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 3806 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case "`/usr/bin/file conftest.o`" in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -3885,263 +3615,68 @@ cat >>conftest.$ac_ext <<_ACEOF int main () { +#ifndef __GNUC__ + choke me +#endif ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes + ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - - -# Save cache, so that ltconfig can load it -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ -AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ -objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ -deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ -|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5 -echo "$as_me: error: libtool configure failed" >&2;} - { (exit 1); exit 1; }; } - -# Reload cache, that may have been modified by ltconfig -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file +ac_compiler_gnu=no fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log - - - - - - - -user_bfd_gas= -# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given. -if test "${enable_bfd_assembler+set}" = set; then - enableval="$enable_bfd_assembler" - case "${enableval}" in - yes) need_bfd=yes user_bfd_gas=yes ;; - no) user_bfd_gas=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} given for bfd-assembler option" >&5 -echo "$as_me: error: bad value ${enableval} given for bfd-assembler option" >&2;} - { (exit 1); exit 1; }; } ;; -esac -fi; # Check whether --enable-targets or --disable-targets was given. -if test "${enable_targets+set}" = set; then - enableval="$enable_targets" - case "${enableval}" in - yes | "") { { echo "$as_me:$LINENO: error: enable-targets option must specify target names or 'all'" >&5 -echo "$as_me: error: enable-targets option must specify target names or 'all'" >&2;} - { (exit 1); exit 1; }; } - ;; - no) enable_targets= ;; - *) enable_targets=$enableval ;; -esac -fi; # Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. -if test "${enable_commonbfdlib+set}" = set; then - enableval="$enable_commonbfdlib" - case "${enableval}" in - yes) commonbfdlib=true ;; - no) commonbfdlib=false ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for BFD commonbfdlib option" >&5 -echo "$as_me: error: bad value ${enableval} for BFD commonbfdlib option" >&2;} - { (exit 1); exit 1; }; } ;; -esac -fi; -using_cgen=no - -build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" -# Check whether --enable-build-warnings or --disable-build-warnings was given. -if test "${enable_build_warnings+set}" = set; then - enableval="$enable_build_warnings" - case "${enableval}" in - yes) ;; - no) build_warnings="-w";; - ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` - build_warnings="${build_warnings} ${t}";; - *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` - build_warnings="${t} ${build_warnings}";; - *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then - echo "Setting warning flags = $build_warnings" 6>&1 -fi -fi; WARN_CFLAGS="" -if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then - WARN_CFLAGS="${build_warnings}" fi - - -# Generate a header file - ac_config_headers="$ac_config_headers config.h:config.in" - - -# If we are on a DOS filesystem, we must use gdb.ini rather than -# .gdbinit. -case "${host}" in - *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*) - GDBINIT="gdb.ini" - ac_config_files="$ac_config_files gdb.ini:gdbinit.in" - - ;; - *) - GDBINIT=".gdbinit" - ac_config_files="$ac_config_files .gdbinit:gdbinit.in" - - ;; -esac - - -#We need this for the host. BOUT header is in host order. -echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 -echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 -if test "${ac_cv_c_bigendian+set}" = set; then +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # See if sys/param.h defines the BYTE_ORDER macro. -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#include int main () { -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif ; return 0; @@ -4156,7 +3691,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4168,28 +3704,102 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - # It does; now see whether it defined to BIG_ENDIAN or not. + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include +#include #include -#include - -int -main () +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; { -#if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif - - ; - return 0; + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; } _ACEOF -rm -f conftest.$ac_objext +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? @@ -4198,7 +3808,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4210,38 +3821,81 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_bigendian=yes + ac_cv_prog_cc_stdc=$ac_arg +break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_c_bigendian=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC -# It does not; compile a test program. -if test "$cross_compiling" = yes; then - # try to guess the endianness by grepping values into an object file - ac_cv_c_bigendian=unknown +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; -short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; -void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } -short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; -short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; -void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +$ac_declaration +#include int main () { - _ascii (); _ebcdic (); +exit (42); ; return 0; } @@ -4255,7 +3909,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4267,747 +3922,2706 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then - ac_cv_c_bigendian=yes -fi -if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi -fi + : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 +continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +$ac_declaration int main () { - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long l; - char c[sizeof (long)]; - } u; - u.l = 1; - exit (u.c[sizeof (long) - 1] == 1); +exit (42); + ; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_bigendian=no + break else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 + echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_c_bigendian=yes -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 -echo "${ECHO_T}$ac_cv_c_bigendian" >&6 -case $ac_cv_c_bigendian in - yes) - -cat >>confdefs.h <<\_ACEOF -#define WORDS_BIGENDIAN 1 -_ACEOF - ;; - no) - ;; - *) - { { echo "$as_me:$LINENO: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -echo "$as_me: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} - { (exit 1); exit 1; }; } ;; -esac - - -te_file=generic - -# Makefile target for installing gas in $(tooldir)/bin. -install_tooldir=install-exec-tooldir - -canon_targets="" -all_targets=no -if test -n "$enable_targets" ; then - for t in `echo $enable_targets | sed 's/,/ /g'`; do - if test $t = "all"; then - all_targets=yes - continue - fi - result=`$ac_config_sub $t 2>/dev/null` - if test -n "$result" ; then - canon_targets="$canon_targets $result" -# else -# # Permit "all", etc. We don't support it yet though. -# canon_targets="$canon_targets $t" - fi - done - _gas_uniq_list="$canon_targets" -_gas_uniq_newlist="" -for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do - case $_gas_uniq_i in - _gas_uniq_dummy) ;; - *) case " $_gas_uniq_newlist " in - *" $_gas_uniq_i "*) ;; - *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; - esac ;; - esac done -canon_targets=$_gas_uniq_newlist - +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h fi -emulations="" - -for this_target in $target $canon_targets ; do +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - targ=${this_target} - . ${srcdir}/configure.tgt +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - case ${target_cpu} in - crisv32) -cat >>confdefs.h <<_ACEOF -#define DEFAULT_CRIS_ARCH $arch +cat >>confdefs.h <<\_ACEOF +#define _GNU_SOURCE 1 _ACEOF - ;; - esac - if test ${this_target} = $target ; then - target_cpu_type=${cpu_type} - elif test ${target_cpu_type} != ${cpu_type} ; then - continue - fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - generic_target=${cpu_type}-${target_vendor}-${target_os} - case ${generic_target} in - i386-*-sco3.2v5*) - if test ${this_target} = $target; then + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext -cat >>confdefs.h <<\_ACEOF -#define SCO_ELF 1 + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include _ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - fi - ;; + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext - i386-*-msdosdjgpp* \ - | i386-*-go32* \ - | i386-go32-rtems*) +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + if test "${ac_cv_header_minix_config_h+set}" = set; then + echo "$as_me:$LINENO: checking for minix/config.h" >&5 +echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6 +if test "${ac_cv_header_minix_config_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 +echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking minix/config.h usability" >&5 +echo $ECHO_N "checking minix/config.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking minix/config.h presence" >&5 +echo $ECHO_N "checking minix/config.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: minix/config.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for minix/config.h" >&5 +echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6 +if test "${ac_cv_header_minix_config_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_minix_config_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5 +echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6 + +fi +if test $ac_cv_header_minix_config_h = yes; then + MINIX=yes +else + MINIX= +fi + + + if test "$MINIX" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_SOURCE 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _POSIX_1_SOURCE 2 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define _MINIX 1 +_ACEOF + + fi + + + + echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5 +echo $ECHO_N "checking whether it is safe to define __EXTENSIONS__... $ECHO_C" >&6 +if test "${ac_cv_safe_to_define___extensions__+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +# define __EXTENSIONS__ 1 + $ac_includes_default +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_safe_to_define___extensions__=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_safe_to_define___extensions__=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5 +echo "${ECHO_T}$ac_cv_safe_to_define___extensions__" >&6 + test $ac_cv_safe_to_define___extensions__ = yes && + cat >>confdefs.h <<\_ACEOF +#define __EXTENSIONS__ 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _ALL_SOURCE 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _GNU_SOURCE 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _TANDEM_SOURCE 1 +_ACEOF + + +# Check whether --enable-largefile or --disable-largefile was given. +if test "${enable_largefile+set}" = set; then + enableval="$enable_largefile" + +fi; +if test "$enable_largefile" != no; then + + echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5 +echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6 +if test "${ac_cv_sys_largefile_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_sys_largefile_CC=no + if test "$GCC" != yes; then + ac_save_CC=$CC + while :; do + # IRIX 6.2 and later do not support large files by default, + # so use the C compiler's -n32 option if that helps. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext + CC="$CC -n32" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sys_largefile_CC=' -n32'; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext + break + done + CC=$ac_save_CC + rm -f conftest.$ac_ext + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5 +echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6 + if test "$ac_cv_sys_largefile_CC" != no; then + CC=$CC$ac_cv_sys_largefile_CC + fi + + echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6 +if test "${ac_cv_sys_file_offset_bits+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + while :; do + ac_cv_sys_file_offset_bits=no + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _FILE_OFFSET_BITS 64 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sys_file_offset_bits=64; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + break +done +fi +echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5 +echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6 +if test "$ac_cv_sys_file_offset_bits" != no; then + +cat >>confdefs.h <<_ACEOF +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits +_ACEOF + +fi +rm -f conftest* + echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5 +echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6 +if test "${ac_cv_sys_large_files+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + while :; do + ac_cv_sys_large_files=no + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGE_FILES 1 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sys_large_files=1; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + break +done +fi +echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5 +echo "${ECHO_T}$ac_cv_sys_large_files" >&6 +if test "$ac_cv_sys_large_files" != no; then + +cat >>confdefs.h <<_ACEOF +#define _LARGE_FILES $ac_cv_sys_large_files +_ACEOF + +fi +rm -f conftest* +fi + + +case `pwd` in + *\ * | *\ *) + { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.2.6' +macro_revision='1.3012' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 +if test "${lt_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done + +fi + +SED=$lt_cv_path_SED + +echo "$as_me:$LINENO: result: $SED" >&5 +echo "${ECHO_T}$SED" >&6 + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +echo "$as_me:$LINENO: checking for fgrep" >&5 +echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 +if test "${ac_cv_prog_fgrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 + then ac_cv_prog_fgrep='grep -F' + else ac_cv_prog_fgrep='fgrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 +echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 + FGREP=$ac_cv_prog_fgrep + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi; +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 +else + echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 +fi +if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +echo "${ECHO_T}$LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 +if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +echo "${ECHO_T}$lt_cv_path_NM" >&6 +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_DUMPBIN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +echo "${ECHO_T}$DUMPBIN" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in "dumpbin -symbols" "link -dump -symbols" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_DUMPBIN" && break +done +test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" + + DUMPBIN=$ac_ct_DUMPBIN +fi + + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 +if test "${lt_cv_nm_interface+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:5506: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:5509: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:5512: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +echo "${ECHO_T}$lt_cv_nm_interface" >&6 + +echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6 +fi + +# find the maximum length of command line arguments +echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 +else + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +echo "$as_me:$LINENO: result: $xsi_shell" >&5 +echo "${ECHO_T}$xsi_shell" >&6 + + +echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +echo "${ECHO_T}$lt_shell_append" >&6 + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 +if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_ld_reload_flag='-r' +fi +echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_OBJDUMP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +echo "${ECHO_T}$OBJDUMP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + OBJDUMP=$ac_ct_OBJDUMP +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 +if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + AR=$ac_ct_AR +else + AR="$ac_cv_prog_AR" +fi + +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STRIP=$ac_ct_STRIP +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -cat >>confdefs.h <<\_ACEOF -#define STRICTCOFF 1 -_ACEOF + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi - ;; +test -z "$RANLIB" && RANLIB=: - i860-*-*) - { echo "$as_me:$LINENO: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&5 -echo "$as_me: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&2;} - ;; - mips-sony-bsd*) - ;; - mips-*-bsd*) - { { echo "$as_me:$LINENO: error: Unknown vendor for mips-bsd configuration." >&5 -echo "$as_me: error: Unknown vendor for mips-bsd configuration." >&2;} - { (exit 1); exit 1; }; } - ;; - ppc-*-aix5.*) -cat >>confdefs.h <<\_ACEOF -#define AIX_WEAK_SUPPORT 1 -_ACEOF - ;; - ppc-*-linux-gnu*) - case "$endian" in - big) ;; - *) { { echo "$as_me:$LINENO: error: GNU/Linux must be configured big endian" >&5 -echo "$as_me: error: GNU/Linux must be configured big endian" >&2;} - { (exit 1); exit 1; }; } ;; - esac - ;; - ppc-*-solaris*) - if test ${this_target} = $target; then -cat >>confdefs.h <<\_ACEOF -#define TARGET_SOLARIS_COMMENT 1 -_ACEOF +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= - fi - if test x${endian} = xbig; then - { { echo "$as_me:$LINENO: error: Solaris must be configured little endian" >&5 -echo "$as_me: error: Solaris must be configured little endian" >&2;} - { (exit 1); exit 1; }; } - fi - ;; +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi - sh*-*-symbianelf*) -cat >>confdefs.h <<\_ACEOF -#define TARGET_SYMBIAN 1 -_ACEOF - ;; - esac - if test ${this_target} = $target ; then - endian_def= - if test x${endian} = xbig; then - endian_def=1 - elif test x${endian} = xlittle; then - endian_def=0 - fi - if test x${endian_def} != x; then -cat >>confdefs.h <<_ACEOF -#define TARGET_BYTES_BIG_ENDIAN $endian_def -_ACEOF - fi - fi -# Other random stuff. - case ${cpu_type} in - mips) - # Set mips_cpu to the name of the default CPU. - case ${target_cpu} in - mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el) - mips_cpu=from-abi - ;; - mipsisa32 | mipsisa32el) - mips_cpu=mips32 - ;; - mipsisa32r2 | mipsisa32r2el) - mips_cpu=mips32r2 - ;; - mipsisa64 | mipsisa64el) - mips_cpu=mips64 - ;; - mipsisa64r2 | mipsisa64r2el) - mips_cpu=mips64r2 - ;; - mipstx39 | mipstx39el) - mips_cpu=r3900 - ;; - mips64vr | mips64vrel) - mips_cpu=vr4100 - ;; - mipsisa32r2* | mipsisa64r2*) - mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'` - ;; - mips64* | mipsisa64* | mipsisa32*) - mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'` - ;; - *) - { { echo "$as_me:$LINENO: error: $target_cpu isn't a supported MIPS CPU name" >&5 -echo "$as_me: error: $target_cpu isn't a supported MIPS CPU name" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - # See whether it's appropriate to set E_MIPS_ABI_O32 for o32 - # binaries. It's a GNU extension that some OSes don't understand. - # The value only matters on ELF targets. - case ${target} in - *-*-irix*) - use_e_mips_abi_o32=0 - ;; - *) - use_e_mips_abi_o32=1 - ;; - esac - # Decide whether to generate 32-bit or 64-bit code by default. - # Used to resolve -march=from-abi when an embedded ABI is selected. - case ${target} in - mips64*-*-* | mipsisa64*-*-*) - mips_default_64bit=1 - ;; - *) - mips_default_64bit=0 - ;; - esac - # Decide which ABI to target by default. - case ${target} in - mips64*-linux* | mips-sgi-irix6*) - mips_default_abi=N32_ABI - ;; - mips*-linux*) - mips_default_abi=O32_ABI - ;; - *) - mips_default_abi=NO_ABI - ;; - esac -cat >>confdefs.h <<_ACEOF -#define MIPS_CPU_STRING_DEFAULT "$mips_cpu" -_ACEOF -cat >>confdefs.h <<_ACEOF -#define USE_E_MIPS_ABI_O32 $use_e_mips_abi_o32 -_ACEOF -cat >>confdefs.h <<_ACEOF -#define MIPS_DEFAULT_64BIT $mips_default_64bit -_ACEOF -cat >>confdefs.h <<_ACEOF -#define MIPS_DEFAULT_ABI $mips_default_abi -_ACEOF - ;; - esac - # Do we need the opcodes library? - case ${cpu_type} in - vax | i386 | tic30) - ;; - *) - need_opcodes=yes - case "${enable_shared}" in - yes) shared_opcodes=true ;; - *opcodes*) shared_opcodes=true ;; - *) shared_opcodes=false ;; - esac - if test "${shared_opcodes}" = "true"; then - # A shared libopcodes must be linked against libbfd. - need_bfd=yes - fi - ;; - esac - # Any other special object files needed ? - case ${cpu_type} in - fr30 | ip2k | iq2000 | m32r | openrisc) - using_cgen=yes - ;; - frv) - using_cgen=yes - ;; - m68k) - case ${extra_objects} in - *m68k-parse.o*) ;; - *) extra_objects="$extra_objects m68k-parse.o" ;; - esac - ;; - mips) - echo ${extra_objects} | grep -s "itbl-parse.o" - if test $? -ne 0 ; then - extra_objects="$extra_objects itbl-parse.o" - fi - echo ${extra_objects} | grep -s "itbl-lex.o" - if test $? -ne 0 ; then - extra_objects="$extra_objects itbl-lex.o" - fi - echo ${extra_objects} | grep -s "itbl-ops.o" - if test $? -ne 0 ; then - extra_objects="$extra_objects itbl-ops.o" - fi - ;; - i386 | s390 | sparc) - if test $this_target = $target ; then -cat >>confdefs.h <<_ACEOF -#define DEFAULT_ARCH "${arch}" -_ACEOF - fi - ;; - xstormy16) - using_cgen=yes - ;; - xtensa) - echo ${extra_objects} | grep -s "xtensa-relax.o" - if test $? -ne 0 ; then - extra_objects="$extra_objects xtensa-relax.o" - fi - ;; - *) - ;; - esac - if test $using_cgen = yes ; then - case "x${extra_objects}" in - *cgen.o*) ;; - *) extra_objects="$extra_objects cgen.o" ;; - esac - fi -# See if we really can support this configuration with the emulation code. - if test $this_target = $target ; then - primary_bfd_gas=$bfd_gas - obj_format=$fmt - te_file=$em - if test $bfd_gas = no ; then - # Can't support other configurations this way. - break - fi - elif test $bfd_gas = no ; then - # Can't support this configuration. - break - fi +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -# From target name and format, produce a list of supported emulations. +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - case ${generic_target}-${fmt} in - mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; - mips*-*-linux*-*) case "$endian" in - big) emulation="mipsbelf mipslelf mipself" ;; - *) emulation="mipslelf mipsbelf mipself" ;; - esac ;; - mips-*-lnews*-ecoff) ;; - mips-*-*-ecoff) case "$endian" in - big) emulation="mipsbecoff mipslecoff mipsecoff" ;; - *) emulation="mipslecoff mipsbecoff mipsecoff" ;; - esac ;; - mips-*-*-elf) case "$endian" in - big) emulation="mipsbelf mipslelf mipself" ;; - *) emulation="mipslelf mipsbelf mipself" ;; - esac ;; - mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; - # i386-pc-pe-coff != i386-pc-coff. - i386-*-pe-coff) ;; - # Uncommenting the next line will turn on support for i386 AOUT - # for the default linux configuration - # i386-*-linux*-elf) emulation="i386elf i386aout" ;; - # - i386-*-aout) emulation="i386aout" ;; - i386-*-coff) emulation="i386coff" ;; - i386-*-elf) emulation="i386elf" ;; +# Allow CC to be a program name with arguments. +compiler=$CC - # Always all formats. The first stated emulation becomes the default. - cris-*-*aout*) emulation="crisaout criself" ;; - cris-*-*) emulation="criself crisaout" ;; - esac - emulations="$emulations $emulation" +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else -done +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] -# Turn on all targets if possible -if test ${all_targets} = "yes"; then - case ${target_cpu_type} in - i386) - case ${obj_format} in - aout) - emulations="$emulations i386coff i386elf" - ;; - coff) - emulations="$emulations i386aout i386elf" - ;; - elf) - emulations="$emulations i386aout i386coff" - ;; - esac - ;; - esac -fi +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' -# Assign floating point type. Most processors with FP support -# IEEE FP. On those that don't support FP at all, usually IEEE -# is emulated. -case ${target_cpu} in - vax | tahoe ) atof=${target_cpu} ;; - pdp11) atof=vax ;; - *) atof=ieee ;; -esac +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -case "${obj_format}" in - "") { { echo "$as_me:$LINENO: error: GAS does not know what format to use for target ${target}" >&5 -echo "$as_me: error: GAS does not know what format to use for target ${target}" >&2;} - { (exit 1); exit 1; }; } ;; +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; esac -# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). -cgen_cpu_prefix="" -if test $using_cgen = yes ; then - case ${target_cpu} in - *) cgen_cpu_prefix=${target_cpu} ;; - esac +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" -cat >>confdefs.h <<\_ACEOF -#define USING_CGEN 1 -_ACEOF +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" -fi +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi -if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then - { { echo "$as_me:$LINENO: error: GAS does not support target CPU ${target_cpu_type}" >&5 -echo "$as_me: error: GAS does not support target CPU ${target_cpu_type}" >&2;} - { (exit 1); exit 1; }; } -fi + # Check to see that the pipe works correctly. + pipe_works=no -if test ! -r ${srcdir}/config/obj-${obj_format}.c; then - { { echo "$as_me:$LINENO: error: GAS does not have support for object file format ${obj_format}" >&5 -echo "$as_me: error: GAS does not have support for object file format ${obj_format}" >&2;} - { (exit 1); exit 1; }; } -fi + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF -case ${user_bfd_gas}-${primary_bfd_gas} in - yes-yes | no-no) - # We didn't override user's choice. - ;; - no-yes) - { echo "$as_me:$LINENO: WARNING: Use of BFD is required for ${target}; overriding config options." >&5 -echo "$as_me: WARNING: Use of BFD is required for ${target}; overriding config options." >&2;} - ;; - no-preferred) - primary_bfd_gas=no - ;; - *-preferred) - primary_bfd_gas=yes - ;; - yes-*) - primary_bfd_gas=yes - ;; - -*) - # User specified nothing. - ;; -esac + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi -# Some COFF configurations want these random other flags set. -case ${obj_format} in - coff) - case ${target_cpu_type} in - i386) -cat >>confdefs.h <<\_ACEOF -#define I386COFF 1 -_ACEOF - ;; - m68k) -cat >>confdefs.h <<\_ACEOF -#define M68KCOFF 1 -_ACEOF - ;; - m88k) -cat >>confdefs.h <<\_ACEOF -#define M88KCOFF 1 -_ACEOF - ;; - esac - ;; -esac + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif -# Getting this done right is going to be a bitch. Each configuration specified -# with --enable-targets=... should be checked for environment, format, cpu, and -# bfd_gas setting. -# -# For each configuration, the necessary object file support code must be linked -# in. This might be only one, it might be up to four. The necessary emulation -# code needs to be provided, too. -# -# And then there's "--enable-targets=all".... -# -# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh. +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' -formats="${obj_format}" -emfiles="" -EMULATIONS="" -_gas_uniq_list="$emulations" -_gas_uniq_newlist="" -for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do - case $_gas_uniq_i in - _gas_uniq_dummy) ;; - *) case " $_gas_uniq_newlist " in - *" $_gas_uniq_i "*) ;; - *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; - esac ;; - esac -done -emulations=$_gas_uniq_newlist + cat <<_LT_EOF >> conftest.$ac_ext -for em in . $emulations ; do - case $em in - .) continue ;; - mipsbelf | mipslelf | mipself) - fmt=elf file=mipself ;; - mipsbecoff | mipslecoff | mipsecoff) - fmt=ecoff file=mipsecoff ;; - *coff) - fmt=coff file=$em ;; - *aout) - fmt=aout file=$em ;; - *elf) - fmt=elf file=$em ;; - esac - formats="$formats $fmt" - emfiles="$emfiles e-$file.o" - EMULATIONS="$EMULATIONS &$em," -done -_gas_uniq_list="$formats" -_gas_uniq_newlist="" -for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do - case $_gas_uniq_i in - _gas_uniq_dummy) ;; - *) case " $_gas_uniq_newlist " in - *" $_gas_uniq_i "*) ;; - *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; - esac ;; - esac -done -formats=$_gas_uniq_newlist +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif -_gas_uniq_list="$emfiles" -_gas_uniq_newlist="" -for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do - case $_gas_uniq_i in - _gas_uniq_dummy) ;; - *) case " $_gas_uniq_newlist " in - *" $_gas_uniq_i "*) ;; - *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; - esac ;; - esac -done -emfiles=$_gas_uniq_newlist +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done -if test `set . $formats ; shift ; echo $#` -gt 1 ; then - for fmt in $formats ; do - case $fmt in - aout) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_AOUT 1 -_ACEOF - ;; - bout) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_BOUT 1 -_ACEOF - ;; - coff) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_COFF 1 -_ACEOF - ;; - ecoff) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_ECOFF 1 -_ACEOF - ;; - elf) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_ELF 1 -_ACEOF - ;; - generic) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_GENERIC 1 -_ACEOF - ;; - hp300) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_HP300 1 -_ACEOF - ;; - ieee) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_IEEE 1 -_ACEOF - ;; - som) -cat >>confdefs.h <<\_ACEOF -#define OBJ_MAYBE_SOM 1 -_ACEOF - ;; - esac - extra_objects="$extra_objects obj-$fmt.o" - done - obj_format=multi fi -if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then - DEFAULT_EMULATION=`set . $emulations ; echo $2` - # e-mips* has more than one emulation per file, e-i386* has just one at the - # moment. If only one emulation is specified, then don't define - # USE_EMULATIONS or include any of the e-files as they will only be bloat. - case "${obj_format}${emfiles}" in - multi* | *mips*) - extra_objects="$extra_objects $emfiles" -cat >>confdefs.h <<\_ACEOF -#define USE_EMULATIONS 1 -_ACEOF - ;; - esac +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + echo "$as_me:$LINENO: result: failed" >&5 +echo "${ECHO_T}failed" >&6 +else + echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6 fi -cat >>confdefs.h <<_ACEOF -#define EMULATIONS $EMULATIONS -_ACEOF -cat >>confdefs.h <<_ACEOF -#define DEFAULT_EMULATION "$DEFAULT_EMULATION" -_ACEOF -case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in - yes-*-coff) need_bfd=yes ;; - no-*-coff) need_bfd=yes -cat >>confdefs.h <<\_ACEOF -#define MANY_SEGMENTS 1 -_ACEOF - ;; -esac -reject_dev_configs=yes -case ${reject_dev_configs}-${dev} in - yes-yes) # Oops. - { { echo "$as_me:$LINENO: error: GAS does not support the ${generic_target} configuration." >&5 -echo "$as_me: error: GAS does not support the ${generic_target} configuration." >&2;} - { (exit 1); exit 1; }; } - ;; -esac @@ -5015,77 +6629,326 @@ esac -case "${primary_bfd_gas}" in - yes) -cat >>confdefs.h <<\_ACEOF -#define BFD_ASSEMBLER 1 -_ACEOF - need_bfd=yes ;; -esac -# do we need the opcodes library? -case "${need_opcodes}" in -yes) - OPCODES_LIB=../opcodes/libopcodes.la - ;; -esac -case "${need_bfd}" in -yes) - BFDLIB=../bfd/libbfd.la - BFDVER_H=../bfd/bfdver.h - ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h' - ;; -esac +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" +fi; +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 6669 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 +if test "${lt_cv_cc_needs_belf+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -cat >>confdefs.h <<_ACEOF -#define TARGET_ALIAS "${target_alias}" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ _ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ -cat >>confdefs.h <<_ACEOF -#define TARGET_CANONICAL "${target}" + ; + return 0; +} _ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + lt_cv_cc_needs_belf=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +lt_cv_cc_needs_belf=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -cat >>confdefs.h <<_ACEOF -#define TARGET_CPU "${target_cpu}" -_ACEOF +fi +echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac +need_locks="$enable_libtool_lock" -cat >>confdefs.h <<_ACEOF -#define TARGET_VENDOR "${target_vendor}" -_ACEOF + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -cat >>confdefs.h <<_ACEOF -#define TARGET_OS "${target_os}" -_ACEOF +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +echo "${ECHO_T}$DSYMUTIL" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + DSYMUTIL=$ac_ct_DSYMUTIL +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5094,7 +6957,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -5103,27 +6966,27 @@ done fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + echo "$as_me:$LINENO: result: $NMEDIT" >&5 +echo "${ECHO_T}$NMEDIT" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5132,40 +6995,40 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" + ac_cv_prog_ac_ct_NMEDIT="nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done + test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +echo "${ECHO_T}$ac_ct_NMEDIT" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - CC=$ac_ct_CC + NMEDIT=$ac_ct_NMEDIT else - CC="$ac_cv_prog_CC" + NMEDIT="$ac_cv_prog_NMEDIT" fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5174,7 +7037,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -5183,27 +7046,27 @@ done fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + echo "$as_me:$LINENO: result: $LIPO" >&5 +echo "${ECHO_T}$LIPO" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5212,42 +7075,41 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" + ac_cv_prog_ac_ct_LIPO="lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done + test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +echo "${ECHO_T}$ac_ct_LIPO" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - CC=$ac_ct_CC + LIPO=$ac_ct_LIPO else - CC="$ac_cv_prog_CC" + LIPO="$ac_cv_prog_LIPO" fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else - ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do @@ -5255,54 +7117,36 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi fi fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + echo "$as_me:$LINENO: result: $OTOOL" >&5 +echo "${ECHO_T}$OTOOL" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5311,40 +7155,40 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + ac_cv_prog_ac_ct_OTOOL="otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done + test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +echo "${ECHO_T}$ac_ct_OTOOL" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - test -n "$CC" && break - done + OTOOL=$ac_ct_OTOOL +else + OTOOL="$ac_cv_prog_OTOOL" fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_OTOOL64+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -5353,7 +7197,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -5362,389 +7206,227 @@ done fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + echo "$as_me:$LINENO: result: $OTOOL64" >&5 +echo "${ECHO_T}$OTOOL64" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -ac_cv_prog_cc_g=no + test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +echo "${ECHO_T}$ac_ct_OTOOL64" >&6 else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + + OTOOL64=$ac_ct_OTOOL64 else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} + OTOOL64="$ac_cv_prog_OTOOL64" +fi -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC -fi -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF + + + + + + + + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 + echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_declaration -#include + int main () { -exit (42); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - : + lt_cv_ld_exported_symbols_list=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -continue +lt_cv_ld_exported_symbols_list=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + + +for ac_header in dlfcn.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} +$ac_includes_default + +#include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 @@ -5755,7 +7437,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5767,27 +7450,446 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - break + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi; + + + + + + + + + # Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi; + + + + + + + + + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi; + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi; + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +echo "$as_me:$LINENO: checking for objdir" >&5 +echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +if test "${lt_cv_objdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +echo "${ECHO_T}$lt_cv_objdir" >&6 +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + + + + + + + + + + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo "$as_me:$LINENO: checking for file" >&5 +echo $ECHO_N "checking for file... $ECHO_C" >&6 +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac fi +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + else + MAGIC_CMD=: + fi fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -5795,115 +7897,1092 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -for ac_prog in 'bison -y' byacc -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_YACC+set}" = set; then +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$YACC"; then - ac_cv_prog_YACC="$YACC" # Let the user override the test. + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7975: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7979: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_YACC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done + : +fi fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic" >&6 + + + + + + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8314: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:8318: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + fi -YACC=$ac_cv_prog_YACC -if test -n "$YACC"; then - echo "$as_me:$LINENO: result: $YACC" >&5 -echo "${ECHO_T}$YACC" >&6 +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no fi - test -n "$YACC" && break -done -test -n "$YACC" || YACC="yacc" +fi -for ac_prog in flex lex -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_LEX+set}" = set; then + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$LEX"; then - ac_cv_prog_LEX="$LEX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LEX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= fi -LEX=$ac_cv_prog_LEX -if test -n "$LEX"; then - echo "$as_me:$LINENO: result: $LEX" >&5 -echo "${ECHO_T}$LEX" >&6 + + + + + + + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8419: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:8423: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 - test -n "$LEX" && break -done -test -n "$LEX" || LEX=":" -if test -z "$LEXLIB" -then - echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5 -echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6 -if test "${ac_cv_lib_fl_yywrap+set}" = set; then + + + + + echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lfl $LIBS" -cat >conftest.$ac_ext <<_ACEOF + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8474: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:8478: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6 + if test "$hard_links" = no; then + { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char yywrap (); int main () { -yywrap (); + ; return 0; } @@ -5917,7 +8996,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5929,47 +9009,49 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_fl_yywrap=yes + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_fl_yywrap=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5 -echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6 -if test $ac_cv_lib_fl_yywrap = yes; then - LEXLIB="-lfl" -else - echo "$as_me:$LINENO: checking for yywrap in -ll" >&5 -echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6 -if test "${ac_cv_lib_l_yywrap+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ll $LIBS" -cat >conftest.$ac_ext <<_ACEOF +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char yywrap (); int main () { -yywrap (); + ; return 0; } @@ -5983,7 +9065,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5995,73 +9078,239 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_l_yywrap=yes + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_l_yywrap=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5 -echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6 -if test $ac_cv_lib_l_yywrap = yes; then - LEXLIB="-ll" -fi +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -fi + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; -fi + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; -if test "x$LEX" != "x:"; then - echo "$as_me:$LINENO: checking lex output file root" >&5 -echo $ECHO_N "checking lex output file root... $ECHO_C" >&6 -if test "${ac_cv_prog_lex_root+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # The minimal lex program is just a single line: %%. But some broken lexes -# (Solaris, I think it was) want two %% lines, so accommodate them. -cat >conftest.l <<_ACEOF -%% -%% -_ACEOF -{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5 - (eval $LEX conftest.l) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -if test -f lex.yy.c; then - ac_cv_prog_lex_root=lex.yy -elif test -f lexyy.c; then - ac_cv_prog_lex_root=lexyy -else - { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 -echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} - { (exit 1); exit 1; }; } -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 -echo "${ECHO_T}$ac_cv_prog_lex_root" >&6 -rm -f conftest.l -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=echo + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 -echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6 -if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # POSIX says lex can declare yytext either as a pointer or an array; the -# default is implementation-dependent. Figure out which it is, since -# not all implementations provide the %pointer and %array declarations. -ac_cv_prog_lex_yytext_pointer=no -echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c -ac_save_LIBS=$LIBS -LIBS="$LIBS $LEXLIB" -cat >conftest.$ac_ext <<_ACEOF -`cat $LEX_OUTPUT_ROOT.c` + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 @@ -6072,7 +9321,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6084,779 +9334,1617 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_prog_lex_yytext_pointer=yes + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_save_LIBS -rm -f "${LEX_OUTPUT_ROOT}.c" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +echo "${ECHO_T}$ld_shlibs" >&6 +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 +echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 -echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6 -if test $ac_cv_prog_lex_yytext_pointer = yes; then -cat >>confdefs.h <<\_ACEOF -#define YYTEXT_POINTER 1 -_ACEOF -fi -fi -if test "$LEX" = :; then - LEX=${am_missing_run}flex -fi -ALL_LINGUAS="fr tr es" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - done - ac_cv_prog_CPP=$CPP -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` else - ac_cpp_err= + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; -int -main () -{ + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +freebsd1*) + dynamic_linker=no + ;; -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; -fi +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; -fi +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + + ; + return 0; } _ACEOF -rm -f conftest$ac_exeext +rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + lt_cv_shlibpath_overrides_runpath=yes +fi + else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 + echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6 +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +echo "$as_me:$LINENO: result: $hardcode_action" >&5 +echo "${ECHO_T}$hardcode_action" >&6 + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless fi -echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 -if test "${ac_cv_c_const+set}" = set; then + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); int main () { -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset x; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *ccp; - char **p; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - ccp = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++ccp; - p = (char**) ccp; - ccp = (char const *const *) p; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - } -#endif - +dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_const=yes + ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_c_const=no +ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -echo "${ECHO_T}$ac_cv_c_const" >&6 -if test $ac_cv_c_const = no; then +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else -cat >>confdefs.h <<\_ACEOF -#define const -_ACEOF + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes fi -echo "$as_me:$LINENO: checking for inline" >&5 -echo $ECHO_N "checking for inline... $ECHO_C" >&6 -if test "${ac_cv_c_inline+set}" = set; then + ;; + + *) + echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shl_load) || defined (__stub___shl_load) +choke me +#else +char (*f) () = shl_load; +#endif +#ifdef __cplusplus +} #endif +int +main () +{ +return f != shl_load; + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_inline=$ac_kw; break + ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_func_shl_load=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done - +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -echo "${ECHO_T}$ac_cv_c_inline" >&6 - - -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; - esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF - ;; -esac - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +if test $ac_cv_func_shl_load = yes; then + lt_cv_dlopen="shl_load" +else + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" + ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" +ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi - -done - - -echo "$as_me:$LINENO: checking for off_t" >&5 -echo $ECHO_N "checking for off_t... $ECHO_C" >&6 -if test "${ac_cv_type_off_t+set}" = set; then +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -6865,143 +10953,180 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_dlopen) || defined (__stub___dlopen) +choke me +#else +char (*f) () = dlopen; +#endif +#ifdef __cplusplus +} +#endif + int main () { -if ((off_t *) 0) - return 0; -if (sizeof (off_t)) - return 0; +return f != dlopen; ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_type_off_t=yes + ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_off_t=no +ac_cv_func_dlopen=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 -echo "${ECHO_T}$ac_cv_type_off_t" >&6 -if test $ac_cv_type_off_t = yes; then - : +echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +if test $ac_cv_func_dlopen = yes; then + lt_cv_dlopen="dlopen" else - -cat >>confdefs.h <<_ACEOF -#define off_t long -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for size_t" >&5 -echo $ECHO_N "checking for size_t... $ECHO_C" >&6 -if test "${ac_cv_type_size_t+set}" = set; then + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); int main () { -if ((size_t *) 0) - return 0; -if (sizeof (size_t)) - return 0; +dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' + { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_type_size_t=yes + ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_type_size_t=no +ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -echo "${ECHO_T}$ac_cv_type_size_t" >&6 -if test $ac_cv_type_size_t = yes; then - : +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned -_ACEOF - -fi - -# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works -# for constant arguments. Useless! -echo "$as_me:$LINENO: checking for working alloca.h" >&5 -echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6 -if test "${ac_cv_working_alloca_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); int main () { -char *p = (char *) alloca (2 * sizeof (int)); +dlopen (); ; return 0; } @@ -7015,7 +11140,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7027,62 +11153,47 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_working_alloca_h=yes + ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_working_alloca_h=no +ac_cv_lib_svld_dlopen=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 -echo "${ECHO_T}$ac_cv_working_alloca_h" >&6 -if test $ac_cv_working_alloca_h = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_ALLOCA_H 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for alloca" >&5 -echo $ECHO_N "checking for alloca... $ECHO_C" >&6 -if test "${ac_cv_func_alloca_works+set}" = set; then +echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +if test $ac_cv_lib_svld_dlopen = yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#ifdef __GNUC__ -# define alloca __builtin_alloca -#else -# ifdef _MSC_VER -# include -# define alloca _alloca -# else -# if HAVE_ALLOCA_H -# include -# else -# ifdef _AIX - #pragma alloca -# else -# ifndef alloca /* predefined by HP cc +Olibcalls */ -char *alloca (); -# endif -# endif -# endif -# endif -#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dld_link (); int main () { -char *p = (char *) alloca (1); +dld_link (); ; return 0; } @@ -7096,7 +11207,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7108,263 +11220,637 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_func_alloca_works=yes + ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_alloca_works=no +ac_cv_lib_dld_dld_link=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +if test $ac_cv_lib_dld_dld_link = yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 11286 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +if test "${lt_cv_dlopen_self_static+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 11382 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + fi + ;; + *) + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6 + + echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6 + + echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6 + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +# Check whether --enable-targets or --disable-targets was given. +if test "${enable_targets+set}" = set; then + enableval="$enable_targets" + case "${enableval}" in + yes | "") { { echo "$as_me:$LINENO: error: enable-targets option must specify target names or 'all'" >&5 +echo "$as_me: error: enable-targets option must specify target names or 'all'" >&2;} + { (exit 1); exit 1; }; } + ;; + no) enable_targets= ;; + *) enable_targets=$enableval ;; +esac +fi; +ac_checking=yes +if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then + ac_checking= fi -echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 -echo "${ECHO_T}$ac_cv_func_alloca_works" >&6 - -if test $ac_cv_func_alloca_works = yes; then +# Check whether --enable-checking or --disable-checking was given. +if test "${enable_checking+set}" = set; then + enableval="$enable_checking" + case "${enableval}" in + no|none) ac_checking= ;; + *) ac_checking=yes ;; +esac +fi; if test x$ac_checking != x ; then cat >>confdefs.h <<\_ACEOF -#define HAVE_ALLOCA 1 +#define ENABLE_CHECKING 1 _ACEOF -else - # The SVR3 libPW and SVR4 libucb both contain incompatible functions -# that cause trouble. Some versions do not even contain alloca or -# contain a buggy version. If you still want to use their alloca, -# use ar to extract alloca.o from them instead of compiling alloca.c. +fi -ALLOCA=alloca.$ac_objext +using_cgen=no -cat >>confdefs.h <<\_ACEOF -#define C_ALLOCA 1 -_ACEOF +GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" -echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 -echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6 -if test "${ac_cv_os_cray+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if defined(CRAY) && ! defined(CRAY2) -webecray -#else -wenotbecray -#endif +# Check whether --enable-werror or --disable-werror was given. +if test "${enable_werror+set}" = set; then + enableval="$enable_werror" + case "${enableval}" in + yes | y) ERROR_ON_WARNING="yes" ;; + no | n) ERROR_ON_WARNING="no" ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-werror" >&5 +echo "$as_me: error: bad value ${enableval} for --enable-werror" >&2;} + { (exit 1); exit 1; }; } ;; + esac +fi; -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "webecray" >/dev/null 2>&1; then - ac_cv_os_cray=yes -else - ac_cv_os_cray=no +# Enable -Wno-format by default when using gcc on mingw +case "${host}" in + *-*-mingw32*) + if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then + GCC_WARN_CFLAGS="$GCC_WARN_CFLAGS -Wno-format" + fi + ;; + *) ;; +esac + +# Enable -Werror by default when using gcc +if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then + ERROR_ON_WARNING=yes fi -rm -f conftest* +NO_WERROR= +if test "${ERROR_ON_WARNING}" = yes ; then + GCC_WARN_CFLAGS="$GCC_WARN_CFLAGS -Werror" + NO_WERROR="-Wno-error" fi -echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 -echo "${ECHO_T}$ac_cv_os_cray" >&6 -if test $ac_cv_os_cray = yes; then - for ac_func in _getb67 GETB67 getb67; do - as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then + +if test "${GCC}" = yes ; then + WARN_CFLAGS="${GCC_WARN_CFLAGS}" +fi + +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + case "${enableval}" in + yes) WARN_CFLAGS="${GCC_WARN_CFLAGS}";; + no) if test "${GCC}" = yes ; then + WARN_CFLAGS="-w" + fi;; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + WARN_CFLAGS="${GCC_WARN_CFLAGS} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + WARN_CFLAGS="${t} ${GCC_WARN_CFLAGS}";; + *) WARN_CFLAGS=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +fi; + +if test x"$silent" != x"yes" && test x"$WARN_CFLAGS" != x""; then + echo "Setting warning flags = $WARN_CFLAGS" 6>&1 +fi + + + + + +# Generate a header file + ac_config_headers="$ac_config_headers config.h:config.in" + + +# If we are on a DOS filesystem, we must use gdb.ini rather than +# .gdbinit. +case "${host}" in + *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*) + GDBINIT="gdb.ini" + ac_config_files="$ac_config_files gdb.ini:gdbinit.in" + + ;; + *) + GDBINIT=".gdbinit" + ac_config_files="$ac_config_files .gdbinit:gdbinit.in" + + ;; +esac + + +#We need this for the host. BOUT header is in host order. +echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif +#include +#include int main () { -return f != $ac_func; +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - -cat >>confdefs.h <<_ACEOF -#define CRAY_STACKSEG_END $ac_func -_ACEOF - - break -fi - - done -fi - -echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 -echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6 -if test "${ac_cv_c_stack_direction+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_c_stack_direction=0 -else - cat >conftest.$ac_ext <<_ACEOF + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -int -find_stack_direction () -{ - static char *addr = 0; - auto char dummy; - if (addr == 0) - { - addr = &dummy; - return find_stack_direction (); - } - else - return (&dummy > addr) ? 1 : -1; -} +#include +#include int main () { - exit (find_stack_direction () < 0); +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_c_stack_direction=1 + ac_cv_c_bigendian=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_c_stack_direction=-1 -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 -echo "${ECHO_T}$ac_cv_c_stack_direction" >&6 - -cat >>confdefs.h <<_ACEOF -#define STACK_DIRECTION $ac_cv_c_stack_direction -_ACEOF - - -fi - - + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -for ac_header in stdlib.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +ac_cv_c_bigendian=no fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 @@ -7375,7 +11861,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7387,1063 +11874,873 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_header_compiler=yes + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <$ac_header> +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no else - echo "$as_me: failed program was:" >&5 + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no +( exit $ac_status ) +ac_cv_c_bigendian=yes fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" + + +te_file=generic + +# Makefile target for installing gas in $(tooldir)/bin. +install_tooldir=install-exec-tooldir + +canon_targets="" +all_targets=no +if test -n "$enable_targets" ; then + for t in `echo $enable_targets | sed 's/,/ /g'`; do + if test $t = "all"; then + all_targets=yes + continue + fi + result=`$ac_config_sub $t 2>/dev/null` + if test -n "$result" ; then + canon_targets="$canon_targets $result" +# else +# # Permit "all", etc. We don't support it yet though. +# canon_targets="$canon_targets $t" + fi + done + _gas_uniq_list="$canon_targets" +_gas_uniq_newlist="" +for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do + case $_gas_uniq_i in + _gas_uniq_dummy) ;; + *) case " $_gas_uniq_newlist " in + *" $_gas_uniq_i "*) ;; + *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; + esac ;; + esac +done +canon_targets=$_gas_uniq_newlist + fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +emulations="" + +for this_target in $target $canon_targets ; do + + targ=${this_target} + . ${srcdir}/configure.tgt + + case ${target_cpu} in + crisv32) + +cat >>confdefs.h <<_ACEOF +#define DEFAULT_CRIS_ARCH $arch +_ACEOF + + ;; + esac + + if test ${this_target} = $target ; then + target_cpu_type=${cpu_type} + elif test ${target_cpu_type} != ${cpu_type} ; then + continue + fi + + generic_target=${cpu_type}-${target_vendor}-${target_os} + case ${generic_target} in + i386-*-sco3.2v5*) + if test ${this_target} = $target; then + +cat >>confdefs.h <<\_ACEOF +#define SCO_ELF 1 +_ACEOF + + fi + ;; + + i386-*-msdosdjgpp* \ + | i386-*-go32* \ + | i386-go32-rtems*) + +cat >>confdefs.h <<\_ACEOF +#define STRICTCOFF 1 +_ACEOF + + ;; + + i860-*-*) + { echo "$as_me:$LINENO: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&5 +echo "$as_me: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&2;} + ;; + + mips-sony-bsd*) + ;; + mips-*-bsd*) + { { echo "$as_me:$LINENO: error: Unknown vendor for mips-bsd configuration." >&5 +echo "$as_me: error: Unknown vendor for mips-bsd configuration." >&2;} + { (exit 1); exit 1; }; } + ;; + + ppc-*-aix5.*) + +cat >>confdefs.h <<\_ACEOF +#define AIX_WEAK_SUPPORT 1 _ACEOF -fi + ;; + ppc-*-linux-*) + case "$endian" in + big) ;; + *) { { echo "$as_me:$LINENO: error: GNU/Linux must be configured big endian" >&5 +echo "$as_me: error: GNU/Linux must be configured big endian" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + ppc-*-solaris*) + if test ${this_target} = $target; then -done +cat >>confdefs.h <<\_ACEOF +#define TARGET_SOLARIS_COMMENT 1 +_ACEOF + + fi + if test x${endian} = xbig; then + { { echo "$as_me:$LINENO: error: Solaris must be configured little endian" >&5 +echo "$as_me: error: Solaris must be configured little endian" >&2;} + { (exit 1); exit 1; }; } + fi + ;; + sh*-*-symbianelf*) -for ac_func in getpagesize -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<\_ACEOF +#define TARGET_SYMBIAN 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ + ;; + esac -#ifdef __STDC__ -# include -#else -# include -#endif + if test ${this_target} = $target ; then + endian_def= + if test x${endian} = xbig; then + endian_def=1 + elif test x${endian} = xlittle; then + endian_def=0 + fi + if test x${endian_def} != x; then -#undef $ac_func +cat >>confdefs.h <<_ACEOF +#define TARGET_BYTES_BIG_ENDIAN $endian_def +_ACEOF -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif + fi + fi -int -main () -{ -return f != $ac_func; - ; - return 0; -} +# Other random stuff. + + case ${cpu_type} in + mips) + # Set mips_cpu to the name of the default CPU. + case ${target_cpu} in + mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el) + mips_cpu=from-abi + ;; + mipsisa32 | mipsisa32el) + mips_cpu=mips32 + ;; + mipsisa32r2 | mipsisa32r2el) + mips_cpu=mips32r2 + ;; + mipsisa64 | mipsisa64el) + mips_cpu=mips64 + ;; + mipsisa64r2 | mipsisa64r2el) + mips_cpu=mips64r2 + ;; + mipstx39 | mipstx39el) + mips_cpu=r3900 + ;; + mips64vr | mips64vrel) + mips_cpu=vr4100 + ;; + mipsisa32r2* | mipsisa64r2*) + mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'` + ;; + mips64* | mipsisa64* | mipsisa32*) + mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'` + ;; + *) + { { echo "$as_me:$LINENO: error: $target_cpu isn't a supported MIPS CPU name" >&5 +echo "$as_me: error: $target_cpu isn't a supported MIPS CPU name" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + # See whether it's appropriate to set E_MIPS_ABI_O32 for o32 + # binaries. It's a GNU extension that some OSes don't understand. + # The value only matters on ELF targets. + case ${target} in + *-*-irix*) + use_e_mips_abi_o32=0 + ;; + *) + use_e_mips_abi_o32=1 + ;; + esac + # Decide whether to generate 32-bit or 64-bit code by default. + # Used to resolve -march=from-abi when an embedded ABI is selected. + case ${target} in + mips64*-*-* | mipsisa64*-*-*) + mips_default_64bit=1 + ;; + *) + mips_default_64bit=0 + ;; + esac + # Decide which ABI to target by default. + case ${target} in + mips64*-linux* | mips-sgi-irix6*) + mips_default_abi=N32_ABI + ;; + mips*-linux*) + mips_default_abi=O32_ABI + ;; + mips64*-openbsd*) + mips_default_abi=N64_ABI + ;; + *) + mips_default_abi=NO_ABI + ;; + esac + +cat >>confdefs.h <<_ACEOF +#define MIPS_CPU_STRING_DEFAULT "$mips_cpu" _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + +cat >>confdefs.h <<_ACEOF +#define USE_E_MIPS_ABI_O32 $use_e_mips_abi_o32 _ACEOF -fi -done -echo "$as_me:$LINENO: checking for working mmap" >&5 -echo $ECHO_N "checking for working mmap... $ECHO_C" >&6 -if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_mmap_fixed_mapped=no -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define MIPS_DEFAULT_64BIT $mips_default_64bit _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -/* malloc might have been renamed as rpl_malloc. */ -#undef malloc - -/* Thanks to Mike Haertel and Jim Avera for this test. - Here is a matrix of mmap possibilities: - mmap private not fixed - mmap private fixed at somewhere currently unmapped - mmap private fixed at somewhere already mapped - mmap shared not fixed - mmap shared fixed at somewhere currently unmapped - mmap shared fixed at somewhere already mapped - For private mappings, we should verify that changes cannot be read() - back from the file, nor mmap's back from the file at a different - address. (There have been systems where private was not correctly - implemented like the infamous i386 svr4.0, and systems where the - VM page cache was not coherent with the file system buffer cache - like early versions of FreeBSD and possibly contemporary NetBSD.) - For shared mappings, we should conversely verify that changes get - propagated back to all the places they're supposed to be. - - Grep wants private fixed already mapped. - The main things grep needs to know about mmap are: - * does it exist and is it safe to write into the mmap'd area - * how to use it (BSD variants) */ - -#include -#include - -#if !STDC_HEADERS && !HAVE_STDLIB_H -char *malloc (); -#endif -/* This mess was copied from the GNU getpagesize.h. */ -#if !HAVE_GETPAGESIZE -/* Assume that all systems that can run configure have sys/param.h. */ -# if !HAVE_SYS_PARAM_H -# define HAVE_SYS_PARAM_H 1 -# endif -# ifdef _SC_PAGESIZE -# define getpagesize() sysconf(_SC_PAGESIZE) -# else /* no _SC_PAGESIZE */ -# if HAVE_SYS_PARAM_H -# include -# ifdef EXEC_PAGESIZE -# define getpagesize() EXEC_PAGESIZE -# else /* no EXEC_PAGESIZE */ -# ifdef NBPG -# define getpagesize() NBPG * CLSIZE -# ifndef CLSIZE -# define CLSIZE 1 -# endif /* no CLSIZE */ -# else /* no NBPG */ -# ifdef NBPC -# define getpagesize() NBPC -# else /* no NBPC */ -# ifdef PAGESIZE -# define getpagesize() PAGESIZE -# endif /* PAGESIZE */ -# endif /* no NBPC */ -# endif /* no NBPG */ -# endif /* no EXEC_PAGESIZE */ -# else /* no HAVE_SYS_PARAM_H */ -# define getpagesize() 8192 /* punt totally */ -# endif /* no HAVE_SYS_PARAM_H */ -# endif /* no _SC_PAGESIZE */ - -#endif /* no HAVE_GETPAGESIZE */ +cat >>confdefs.h <<_ACEOF +#define MIPS_DEFAULT_ABI $mips_default_abi +_ACEOF + + ;; + esac + + # Do we need the opcodes library? + case ${cpu_type} in + vax | tic30) + ;; + + *) + need_opcodes=yes + + case "${enable_shared}" in + yes) shared_opcodes=true ;; + *opcodes*) shared_opcodes=true ;; + *) shared_opcodes=false ;; + esac + ;; + esac + + # Any other special object files needed ? + case ${cpu_type} in + + bfin) + echo ${extra_objects} | grep -s "bfin-parse.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects bfin-parse.o" + fi -int -main () -{ - char *data, *data2, *data3; - int i, pagesize; - int fd; - - pagesize = getpagesize (); - - /* First, make a file with some known garbage in it. */ - data = (char *) malloc (pagesize); - if (!data) - exit (1); - for (i = 0; i < pagesize; ++i) - *(data + i) = rand (); - umask (0); - fd = creat ("conftest.mmap", 0600); - if (fd < 0) - exit (1); - if (write (fd, data, pagesize) != pagesize) - exit (1); - close (fd); - - /* Next, try to mmap the file at a fixed address which already has - something else allocated at it. If we can, also make sure that - we see the same garbage. */ - fd = open ("conftest.mmap", O_RDWR); - if (fd < 0) - exit (1); - data2 = (char *) malloc (2 * pagesize); - if (!data2) - exit (1); - data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1); - if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, - MAP_PRIVATE | MAP_FIXED, fd, 0L)) - exit (1); - for (i = 0; i < pagesize; ++i) - if (*(data + i) != *(data2 + i)) - exit (1); - - /* Finally, make sure that changes to the mapped area do not - percolate back to the file as seen by read(). (This is a bug on - some variants of i386 svr4.0.) */ - for (i = 0; i < pagesize; ++i) - *(data2 + i) = *(data2 + i) + 1; - data3 = (char *) malloc (pagesize); - if (!data3) - exit (1); - if (read (fd, data3, pagesize) != pagesize) - exit (1); - for (i = 0; i < pagesize; ++i) - if (*(data + i) != *(data3 + i)) - exit (1); - close (fd); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_mmap_fixed_mapped=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + echo ${extra_objects} | grep -s "bfin-lex.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects bfin-lex.o" + fi + ;; -( exit $ac_status ) -ac_cv_func_mmap_fixed_mapped=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 -echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6 -if test $ac_cv_func_mmap_fixed_mapped = yes; then + fr30 | ip2k | iq2000 | lm32 | m32r | openrisc) + using_cgen=yes + ;; -cat >>confdefs.h <<\_ACEOF -#define HAVE_MMAP 1 -_ACEOF + m32c) + using_cgen=yes + ;; + frv) + using_cgen=yes + ;; + m68k) + case ${extra_objects} in + *m68k-parse.o*) ;; + *) extra_objects="$extra_objects m68k-parse.o" ;; + esac + ;; -fi -rm -f conftest.mmap + mep) + using_cgen=yes + ;; + mips) + echo ${extra_objects} | grep -s "itbl-parse.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects itbl-parse.o" + fi + echo ${extra_objects} | grep -s "itbl-lex.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects itbl-lex.o" + fi + echo ${extra_objects} | grep -s "itbl-ops.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects itbl-ops.o" + fi + ;; + mt) + using_cgen=yes + ;; + i386 | s390 | sparc) + if test $this_target = $target ; then +cat >>confdefs.h <<_ACEOF +#define DEFAULT_ARCH "${arch}" +_ACEOF + fi + ;; + xstormy16) + using_cgen=yes + ;; + xc16x) + using_cgen=yes + ;; + xtensa) + echo ${extra_objects} | grep -s "xtensa-relax.o" + if test $? -ne 0 ; then + extra_objects="$extra_objects xtensa-relax.o" + fi + ;; -for ac_header in argz.h limits.h locale.h nl_types.h malloc.h string.h \ -unistd.h values.h sys/param.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + *) + ;; + esac -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 + if test $using_cgen = yes ; then + case "x${extra_objects}" in + *cgen.o*) ;; + *) extra_objects="$extra_objects cgen.o" ;; + esac + fi -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# See if we really can support this configuration with the emulation code. - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 + if test $this_target = $target ; then + obj_format=$fmt + te_file=$em + fi -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +# From target name and format, produce a list of supported emulations. + + case ${generic_target}-${fmt} in + mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; + mips*-*-linux*-*) case "$endian" in + big) emulation="mipsbelf mipslelf mipself" ;; + *) emulation="mipslelf mipsbelf mipself" ;; + esac ;; + mips-*-lnews*-ecoff) ;; + mips-*-*-ecoff) case "$endian" in + big) emulation="mipsbecoff mipslecoff mipsecoff" ;; + *) emulation="mipslecoff mipsbecoff mipsecoff" ;; + esac ;; + mips-*-*-elf) case "$endian" in + big) emulation="mipsbelf mipslelf mipself" ;; + *) emulation="mipslelf mipsbelf mipself" ;; + esac ;; + mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; + # i386-pc-pe-coff != i386-pc-coff. + i386-*-pe-coff) ;; + # Uncommenting the next line will turn on support for i386 AOUT + # for the default linux configuration + # i386-*-linux*-elf) emulation="i386elf i386aout" ;; + # + i386-*-aout) emulation="i386aout" ;; + i386-*-coff) emulation="i386coff" ;; + i386-*-elf) emulation="i386elf" ;; -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF + # Always all formats. The first stated emulation becomes the default. + cris-*-*aout*) emulation="crisaout criself" ;; + cris-*-*) emulation="criself crisaout" ;; + esac -fi + emulations="$emulations $emulation" done +# Turn on all targets if possible +if test ${all_targets} = "yes"; then + case ${target_cpu_type} in + i386) + case ${obj_format} in + aout) + emulations="$emulations i386coff i386elf" + ;; + coff) + emulations="$emulations i386aout i386elf" + ;; + elf) + emulations="$emulations i386aout i386coff" + ;; + esac + ;; + x86_64) + case ${obj_format} in + aout) + emulations="$emulations i386coff i386elf" + ;; + coff) + emulations="$emulations i386aout i386elf" + ;; + elf) + emulations="$emulations i386aout i386coff" + ;; + esac + ;; + esac +fi +# Assign floating point type. Most processors with FP support +# IEEE FP. On those that don't support FP at all, usually IEEE +# is emulated. +case ${target_cpu} in + vax | pdp11 ) atof=vax ;; + *) atof=ieee ;; +esac +case "${obj_format}" in + "") { { echo "$as_me:$LINENO: error: GAS does not know what format to use for target ${target}" >&5 +echo "$as_me: error: GAS does not know what format to use for target ${target}" >&2;} + { (exit 1); exit 1; }; } ;; +esac +# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). +cgen_cpu_prefix="" +if test $using_cgen = yes ; then + case ${target_cpu} in + *) cgen_cpu_prefix=${target_cpu} ;; + esac +cat >>confdefs.h <<\_ACEOF +#define USING_CGEN 1 +_ACEOF +fi +if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then + { { echo "$as_me:$LINENO: error: GAS does not support target CPU ${target_cpu_type}" >&5 +echo "$as_me: error: GAS does not support target CPU ${target_cpu_type}" >&2;} + { (exit 1); exit 1; }; } +fi +if test ! -r ${srcdir}/config/obj-${obj_format}.c; then + { { echo "$as_me:$LINENO: error: GAS does not have support for object file format ${obj_format}" >&5 +echo "$as_me: error: GAS does not have support for object file format ${obj_format}" >&2;} + { (exit 1); exit 1; }; } +fi -for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +# Some COFF configurations want these random other flags set. +case ${obj_format} in + coff) + case ${target_cpu_type} in + i386) +cat >>confdefs.h <<\_ACEOF +#define I386COFF 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func + ;; + m68k) +cat >>confdefs.h <<\_ACEOF +#define M68KCOFF 1 +_ACEOF + ;; + m88k) +cat >>confdefs.h <<\_ACEOF +#define M88KCOFF 1 +_ACEOF + ;; + x86_64) +cat >>confdefs.h <<\_ACEOF +#define I386COFF 1 +_ACEOF + ;; + esac + ;; +esac -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +# Getting this done right is going to be a bitch. Each configuration specified +# with --enable-targets=... should be checked for environment, format, cpu +# setting. +# +# For each configuration, the necessary object file support code must be linked +# in. This might be only one, it might be up to four. The necessary emulation +# code needs to be provided, too. +# +# And then there's "--enable-targets=all".... +# +# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh. -#ifdef __STDC__ -# include -#else -# include -#endif +formats="${obj_format}" +emfiles="" +EMULATIONS="" +_gas_uniq_list="$emulations" +_gas_uniq_newlist="" +for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do + case $_gas_uniq_i in + _gas_uniq_dummy) ;; + *) case " $_gas_uniq_newlist " in + *" $_gas_uniq_i "*) ;; + *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; + esac ;; + esac +done +emulations=$_gas_uniq_newlist -#undef $ac_func +for em in . $emulations ; do + case $em in + .) continue ;; + mipsbelf | mipslelf | mipself) + fmt=elf file=mipself ;; + mipsbecoff | mipslecoff | mipsecoff) + fmt=ecoff file=mipsecoff ;; + *coff) + fmt=coff file=$em ;; + *aout) + fmt=aout file=$em ;; + *elf) + fmt=elf file=$em ;; + esac + formats="$formats $fmt" + emfiles="$emfiles e-$file.o" + EMULATIONS="$EMULATIONS &$em," +done +_gas_uniq_list="$formats" +_gas_uniq_newlist="" +for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do + case $_gas_uniq_i in + _gas_uniq_dummy) ;; + *) case " $_gas_uniq_newlist " in + *" $_gas_uniq_i "*) ;; + *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; + esac ;; + esac +done +formats=$_gas_uniq_newlist -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif +_gas_uniq_list="$emfiles" +_gas_uniq_newlist="" +for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do + case $_gas_uniq_i in + _gas_uniq_dummy) ;; + *) case " $_gas_uniq_newlist " in + *" $_gas_uniq_i "*) ;; + *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;; + esac ;; + esac +done +emfiles=$_gas_uniq_newlist -int -main () -{ -return f != $ac_func; - ; - return 0; -} +if test `set . $formats ; shift ; echo $#` -gt 1 ; then + for fmt in $formats ; do + case $fmt in + aout) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_AOUT 1 _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + ;; + bout) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_BOUT 1 _ACEOF - + ;; + coff) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_COFF 1 +_ACEOF + ;; + ecoff) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_ECOFF 1 +_ACEOF + ;; + elf) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_ELF 1 +_ACEOF + ;; + generic) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_GENERIC 1 +_ACEOF + ;; + som) +cat >>confdefs.h <<\_ACEOF +#define OBJ_MAYBE_SOM 1 +_ACEOF + ;; + esac + extra_objects="$extra_objects obj-$fmt.o" + done + obj_format=multi fi -done - - - if test "${ac_cv_func_stpcpy+set}" != "set"; then +if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then + DEFAULT_EMULATION=`set . $emulations ; echo $2` + # e-mips* has more than one emulation per file, e-i386* has just one at the + # moment. If only one emulation is specified, then don't define + # USE_EMULATIONS or include any of the e-files as they will only be bloat. + case "${obj_format}${emfiles}" in + multi* | *mips*) + extra_objects="$extra_objects $emfiles" -for ac_func in stpcpy -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<\_ACEOF +#define USE_EMULATIONS 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func + ;; + esac +fi -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif -int -main () -{ -return f != $ac_func; - ; - return 0; -} +cat >>confdefs.h <<_ACEOF +#define EMULATIONS $EMULATIONS _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + +cat >>confdefs.h <<_ACEOF +#define DEFAULT_EMULATION "$DEFAULT_EMULATION" _ACEOF -fi -done - fi - if test "${ac_cv_func_stpcpy}" = "yes"; then +reject_dev_configs=yes -cat >>confdefs.h <<\_ACEOF -#define HAVE_STPCPY 1 -_ACEOF +case ${reject_dev_configs}-${dev} in + yes-yes) # Oops. + { { echo "$as_me:$LINENO: error: GAS does not support the ${generic_target} configuration." >&5 +echo "$as_me: error: GAS does not support the ${generic_target} configuration." >&2;} + { (exit 1); exit 1; }; } + ;; +esac - fi - if test $ac_cv_header_locale_h = yes; then - echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 -echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6 -if test "${am_cv_val_LC_MESSAGES+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -return LC_MESSAGES - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - am_cv_val_LC_MESSAGES=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -am_cv_val_LC_MESSAGES=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 -echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6 - if test $am_cv_val_LC_MESSAGES = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_LC_MESSAGES 1 -_ACEOF - fi - fi - echo "$as_me:$LINENO: checking whether NLS is requested" >&5 -echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 - # Check whether --enable-nls or --disable-nls was given. -if test "${enable_nls+set}" = set; then - enableval="$enable_nls" - USE_NLS=$enableval -else - USE_NLS=yes -fi; - echo "$as_me:$LINENO: result: $USE_NLS" >&5 -echo "${ECHO_T}$USE_NLS" >&6 - USE_INCLUDED_LIBINTL=no +# do we need the opcodes library? +case "${need_opcodes}" in +yes) + OPCODES_LIB=../opcodes/libopcodes.la + ;; +esac - if test "$USE_NLS" = "yes"; then - echo "$as_me:$LINENO: checking whether included gettext is requested" >&5 -echo $ECHO_N "checking whether included gettext is requested... $ECHO_C" >&6 -# Check whether --with-included-gettext or --without-included-gettext was given. -if test "${with_included_gettext+set}" = set; then - withval="$with_included_gettext" - nls_cv_force_use_gnu_gettext=$withval -else - nls_cv_force_use_gnu_gettext=no -fi; - echo "$as_me:$LINENO: result: $nls_cv_force_use_gnu_gettext" >&5 -echo "${ECHO_T}$nls_cv_force_use_gnu_gettext" >&6 - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - nls_cv_header_intl= - nls_cv_header_libgt= - CATOBJEXT= - if test "${ac_cv_header_libintl_h+set}" = set; then - echo "$as_me:$LINENO: checking for libintl.h" >&5 -echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 -if test "${ac_cv_header_libintl_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 -echo "${ECHO_T}$ac_cv_header_libintl_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking libintl.h usability" >&5 -echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +cat >>confdefs.h <<_ACEOF +#define TARGET_ALIAS "${target_alias}" +_ACEOF -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 -# Is the header present? -echo "$as_me:$LINENO: checking libintl.h presence" >&5 -echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define TARGET_CANONICAL "${target}" _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include + + +cat >>confdefs.h <<_ACEOF +#define TARGET_CPU "${target_cpu}" _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi + + +cat >>confdefs.h <<_ACEOF +#define TARGET_VENDOR "${target_vendor}" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define TARGET_OS "${target_os}" +_ACEOF + + +for ac_prog in 'bison -y' byacc +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_YACC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_YACC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for libintl.h" >&5 -echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 -if test "${ac_cv_header_libintl_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +YACC=$ac_cv_prog_YACC +if test -n "$YACC"; then + echo "$as_me:$LINENO: result: $YACC" >&5 +echo "${ECHO_T}$YACC" >&6 else - ac_cv_header_libintl_h=$ac_header_preproc + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 -echo "${ECHO_T}$ac_cv_header_libintl_h" >&6 -fi -if test $ac_cv_header_libintl_h = yes; then - echo "$as_me:$LINENO: checking for gettext in libc" >&5 -echo $ECHO_N "checking for gettext in libc... $ECHO_C" >&6 -if test "${gt_cv_func_gettext_libc+set}" = set; then + test -n "$YACC" && break +done +test -n "$YACC" || YACC="yacc" + +for ac_prog in flex lex +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_LEX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -return (int) gettext ("") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gt_cv_func_gettext_libc=yes + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LEX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -gt_cv_func_gettext_libc=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gt_cv_func_gettext_libc" >&5 -echo "${ECHO_T}$gt_cv_func_gettext_libc" >&6 +LEX=$ac_cv_prog_LEX +if test -n "$LEX"; then + echo "$as_me:$LINENO: result: $LEX" >&5 +echo "${ECHO_T}$LEX" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi - if test "$gt_cv_func_gettext_libc" != "yes"; then - echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 -echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6 -if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then + test -n "$LEX" && break +done +test -n "$LEX" || LEX=":" + +if test -z "$LEXLIB" +then + echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5 +echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6 +if test "${ac_cv_lib_fl_yywrap+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" +LIBS="-lfl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -8457,66 +12754,11 @@ extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ -char bindtextdomain (); -int -main () -{ -bindtextdomain (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_intl_bindtextdomain=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_intl_bindtextdomain=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 -echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6 -if test $ac_cv_lib_intl_bindtextdomain = yes; then - echo "$as_me:$LINENO: checking for gettext in libintl" >&5 -echo $ECHO_N "checking for gettext in libintl... $ECHO_C" >&6 -if test "${gt_cv_func_gettext_libintl+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - +char yywrap (); int main () { -return (int) gettext ("") +yywrap (); ; return 0; } @@ -8530,7 +12772,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8539,124 +12782,50 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gt_cv_func_gettext_libintl=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -gt_cv_func_gettext_libintl=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $gt_cv_func_gettext_libintl" >&5 -echo "${ECHO_T}$gt_cv_func_gettext_libintl" >&6 -fi - - fi - - if test "$gt_cv_func_gettext_libc" = "yes" \ - || test "$gt_cv_func_gettext_libintl" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GETTEXT 1 -_ACEOF - - # Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_MSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_fl_yywrap=yes else - case "$MSGFMT" in - /*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then - ac_cv_path_MSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" - ;; -esac + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_fl_yywrap=no fi -MSGFMT="$ac_cv_path_MSGFMT" -if test -n "$MSGFMT"; then - echo "$as_me:$LINENO: result: $MSGFMT" >&5 -echo "${ECHO_T}$MSGFMT" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi - if test "$MSGFMT" != "no"; then - -for ac_func in dcgettext -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then +echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5 +echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6 +if test $ac_cv_lib_fl_yywrap = yes; then + LEXLIB="-lfl" +else + echo "$as_me:$LINENO: checking for yywrap in -ll" >&5 +echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6 +if test "${ac_cv_lib_l_yywrap+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-ll $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" -{ #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - +char yywrap (); int main () { -return f != $ac_func; +yywrap (); ; return 0; } @@ -8670,7 +12839,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8682,117 +12852,73 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - eval "$as_ac_var=yes" + ac_cv_lib_l_yywrap=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_var=no" +ac_cv_lib_l_yywrap=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - +echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5 +echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6 +if test $ac_cv_lib_l_yywrap = yes; then + LEXLIB="-ll" fi -done - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_GMSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - echo "$as_me:$LINENO: result: $GMSGFMT" >&5 -echo "${ECHO_T}$GMSGFMT" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 fi - # Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_XGETTEXT+set}" = set; then +if test "x$LEX" != "x:"; then + echo "$as_me:$LINENO: checking lex output file root" >&5 +echo $ECHO_N "checking lex output file root... $ECHO_C" >&6 +if test "${ac_cv_prog_lex_root+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test -n "$XGETTEXT"; then - echo "$as_me:$LINENO: result: $XGETTEXT" >&5 -echo "${ECHO_T}$XGETTEXT" >&6 + # The minimal lex program is just a single line: %%. But some broken lexes +# (Solaris, I think it was) want two %% lines, so accommodate them. +cat >conftest.l <<_ACEOF +%% +%% +_ACEOF +{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5 + (eval $LEX conftest.l) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 +echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} + { (exit 1); exit 1; }; } fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 +echo "${ECHO_T}$ac_cv_prog_lex_root" >&6 +rm -f conftest.l +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr - ; - return 0; -} +echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 +echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6 +if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c +ac_save_LIBS=$LIBS +LIBS="$LIBS $LEXLIB" +cat >conftest.$ac_ext <<_ACEOF +`cat $LEX_OUTPUT_ROOT.c` _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 @@ -8803,7 +12929,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8815,36 +12942,166 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - CATOBJEXT=.gmo - DATADIRNAME=share + ac_cv_prog_lex_yytext_pointer=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -CATOBJEXT=.mo - DATADIRNAME=lib -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - INSTOBJEXT=.mo - fi - fi +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_save_LIBS +rm -f "${LEX_OUTPUT_ROOT}.c" + +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 +echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6 +if test $ac_cv_prog_lex_yytext_pointer = yes; then + +cat >>confdefs.h <<\_ACEOF +#define YYTEXT_POINTER 1 +_ACEOF + +fi + +fi +if test "$LEX" = :; then + LEX=${am_missing_run}flex +fi + +ALL_LINGUAS="fr tr es rw id" +# If we haven't got the data from the intl directory, +# assume NLS is disabled. +USE_NLS=no +LIBINTL= +LIBINTL_DEP= +INCINTL= +XGETTEXT= +GMSGFMT= +POSUB= + +if test -f ../intl/config.intl; then + . ../intl/config.intl +fi +echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 +if test x"$USE_NLS" != xyes; then + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +else + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_NLS 1 +_ACEOF + + + echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6 + # Look for .po and .gmo files in the source directory. + CATALOGS= + XLINGUAS= + for cat in $srcdir/po/*.gmo $srcdir/po/*.po; do + # If there aren't any .gmo files the shell will give us the + # literal string "../path/to/srcdir/po/*.gmo" which has to be + # weeded out. + case "$cat" in *\**) + continue;; + esac + # The quadruple backslash is collapsed to a double backslash + # by the backticks, then collapsed again by the double quotes, + # leaving us with one backslash in the sed expression (right + # before the dot that mustn't act as a wildcard). + cat=`echo $cat | sed -e "s!$srcdir/po/!!" -e "s!\\\\.po!.gmo!"` + lang=`echo $cat | sed -e "s!\\\\.gmo!!"` + # The user is allowed to set LINGUAS to a list of languages to + # install catalogs for. If it's empty that means "all of them." + if test "x$LINGUAS" = x; then + CATALOGS="$CATALOGS $cat" + XLINGUAS="$XLINGUAS $lang" + else + case "$LINGUAS" in *$lang*) + CATALOGS="$CATALOGS $cat" + XLINGUAS="$XLINGUAS $lang" + ;; + esac + fi + done + LINGUAS="$XLINGUAS" + echo "$as_me:$LINENO: result: $LINGUAS" >&5 +echo "${ECHO_T}$LINGUAS" >&6 + + + DATADIRNAME=share + + INSTOBJEXT=.mo + + GENCAT=gencat + + CATOBJEXT=.gmo fi + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + case "$ac_aux_dir" in + /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; + *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; + esac + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi - if test x"$CATOBJEXT" = x && test -d $srcdir/../intl; then - # Neither gettext nor catgets in included in the C library. - # Fall back on GNU gettext library (assuming it is present). - nls_cv_use_gnu_gettext=yes - fi - fi + echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 + # Check whether --enable-nls or --disable-nls was given. +if test "${enable_nls+set}" = set; then + enableval="$enable_nls" + USE_NLS=$enableval +else + USE_NLS=yes +fi; + echo "$as_me:$LINENO: result: $USE_NLS" >&5 +echo "${ECHO_T}$USE_NLS" >&6 + + + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file - if test "$nls_cv_use_gnu_gettext" = "yes"; then - INTLOBJS="\$(GETTOBJS)" - # Extract the first word of "msgfmt", so it can be a program name with args. +# Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 @@ -8852,27 +13109,31 @@ if test "${ac_cv_path_MSGFMT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$MSGFMT" in - /*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then - ac_cv_path_MSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" - ;; + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" -if test -n "$MSGFMT"; then +if test "$MSGFMT" != ":"; then echo "$as_me:$LINENO: result: $MSGFMT" >&5 echo "${ECHO_T}$MSGFMT" >&6 else @@ -8880,7 +13141,7 @@ else echo "${ECHO_T}no" >&6 fi - # Extract the first word of "gmsgfmt", so it can be a program name with args. + # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 @@ -8920,7 +13181,37 @@ else echo "${ECHO_T}no" >&6 fi - # Extract the first word of "xgettext", so it can be a program name with args. + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 @@ -8928,27 +13219,31 @@ if test "${ac_cv_path_XGETTEXT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; + ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" -if test -n "$XGETTEXT"; then +if test "$XGETTEXT" != ":"; then echo "$as_me:$LINENO: result: $XGETTEXT" >&5 echo "${ECHO_T}$XGETTEXT" >&6 else @@ -8956,281 +13251,103 @@ else echo "${ECHO_T}no" >&6 fi + rm -f messages.po - USE_INCLUDED_LIBINTL=yes - CATOBJEXT=.gmo - INSTOBJEXT=.mo - DATADIRNAME=share - INTLDEPS='$(top_builddir)/../intl/libintl.a' - INTLLIBS=$INTLDEPS - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - nls_cv_header_intl=libintl.h - nls_cv_header_libgt=libgettext.h - fi - - if test "$XGETTEXT" != ":"; then - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - echo "$as_me:$LINENO: result: found xgettext programs is not GNU xgettext; ignore it" >&5 -echo "${ECHO_T}found xgettext programs is not GNU xgettext; ignore it" >&6 - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po - else - DATADIRNAME=share - nls_cv_header_intl=libintl.h - nls_cv_header_libgt=libgettext.h - fi - - # If this is used in GNU gettext we have to set USE_NLS to `yes' - # because some of the sources are only built for this goal. - if test "$PACKAGE" = gettext; then - USE_NLS=yes - USE_INCLUDED_LIBINTL=yes - fi - - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done - - - - - - - - - - - - - if test "x$CATOBJEXT" != "x"; then - -cat >>confdefs.h <<\_ACEOF -#define ENABLE_NLS 1 -_ACEOF - - fi - - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 -echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6 - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - echo "$as_me:$LINENO: result: $LINGUAS" >&5 -echo "${ECHO_T}$LINGUAS" >&6 - fi - - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - if test $ac_cv_header_locale_h = yes; then - INCLUDE_LOCALE_H="#include " - else - INCLUDE_LOCALE_H="\ -/* The system does not provide the header . Take care yourself. */" - fi - - - if test -f $srcdir/po2tbl.sed.in; then - if test "$CATOBJEXT" = ".cat"; then - if test "${ac_cv_header_linux_version_h+set}" = set; then - echo "$as_me:$LINENO: checking for linux/version.h" >&5 -echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6 -if test "${ac_cv_header_linux_version_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5 -echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking linux/version.h usability" >&5 -echo $ECHO_N "checking linux/version.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 -# Is the header present? -echo "$as_me:$LINENO: checking linux/version.h presence" >&5 -echo $ECHO_N "checking linux/version.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' else - ac_cpp_err= + PATH_SEPARATOR=: fi -else - ac_cpp_err=yes + rm -f conf$$.sh fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +rm -f conf$$.file -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: linux/version.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MSGMERGE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: linux/version.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: linux/version.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: linux/version.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: linux/version.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: linux/version.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: linux/version.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: linux/version.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ;; esac -echo "$as_me:$LINENO: checking for linux/version.h" >&5 -echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6 -if test "${ac_cv_header_linux_version_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_linux_version_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5 -echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6 - -fi -if test $ac_cv_header_linux_version_h = yes; then - msgformat=linux -else - msgformat=xopen -fi - - - - sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed - fi - sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ - $srcdir/po2tbl.sed.in > po2tbl.sed - fi - - if test "$PACKAGE" = "gettext"; then - GT_NO="#NO#" - GT_YES= - else - GT_NO= - GT_YES="#YES#" - fi - - +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +echo "${ECHO_T}$MSGMERGE" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi - MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs" + if test "$GMSGFMT" != ":"; then + if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && + (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` + echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5 +echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6 + GMSGFMT=":" + fi + fi - l= + if test "$XGETTEXT" != ":"; then + if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6 + XGETTEXT=":" + fi + rm -f messages.po + fi + ac_config_commands="$ac_config_commands default-1" - if test -f $srcdir/po/POTFILES.in; then - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES - fi echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 @@ -9259,6 +13376,16 @@ fi +if false; then + GENINSRC_NEVER_TRUE= + GENINSRC_NEVER_FALSE='#' +else + GENINSRC_NEVER_TRUE='#' + GENINSRC_NEVER_FALSE= +fi + + + @@ -9268,7 +13395,8 @@ fi -for ac_header in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h + +for ac_header in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h limits.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then @@ -9301,7 +13429,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9465,7 +13594,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9546,7 +13676,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9687,7 +13818,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9819,7 +13951,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9932,7 +14065,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10035,7 +14169,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10073,8 +14208,8 @@ case "${need_libm}" in yes) LIBM= case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) echo "$as_me:$LINENO: checking for _mwvalidcheckl in -lmw" >&5 @@ -10115,7 +14250,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10144,9 +14280,9 @@ if test $ac_cv_lib_mw__mwvalidcheckl = yes; then LIBM="-lmw" fi - echo "$as_me:$LINENO: checking for main in -lm" >&5 -echo $ECHO_N "checking for main in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_main+set}" = set; then + echo "$as_me:$LINENO: checking for cos in -lm" >&5 +echo $ECHO_N "checking for cos in -lm... $ECHO_C" >&6 +if test "${ac_cv_lib_m_cos+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS @@ -10158,11 +14294,17 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char cos (); int main () { -main (); +cos (); ; return 0; } @@ -10176,7 +14318,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10188,99 +14331,336 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_m_main=yes + ac_cv_lib_m_cos=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_m_main=no +ac_cv_lib_m_cos=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_main" >&5 -echo "${ECHO_T}$ac_cv_lib_m_main" >&6 -if test $ac_cv_lib_m_main = yes; then +echo "$as_me:$LINENO: result: $ac_cv_lib_m_cos" >&5 +echo "${ECHO_T}$ac_cv_lib_m_cos" >&6 +if test $ac_cv_lib_m_cos = yes; then LIBM="$LIBM -lm" fi - ;; -*) - echo "$as_me:$LINENO: checking for main in -lm" >&5 -echo $ECHO_N "checking for main in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_main+set}" = set; then + ;; +*) + echo "$as_me:$LINENO: checking for cos in -lm" >&5 +echo $ECHO_N "checking for cos in -lm... $ECHO_C" >&6 +if test "${ac_cv_lib_m_cos+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char cos (); +int +main () +{ +cos (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_m_cos=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_m_cos=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_m_cos" >&5 +echo "${ECHO_T}$ac_cv_lib_m_cos" >&6 +if test $ac_cv_lib_m_cos = yes; then + LIBM="-lm" +fi + + ;; +esac + + + + ;; +esac + +# Some non-ANSI preprocessors botch requoting inside strings. That's bad +# enough, but on some of those systems, the assert macro relies on requoting +# working properly! +echo "$as_me:$LINENO: checking for working assert macro" >&5 +echo $ECHO_N "checking for working assert macro... $ECHO_C" >&6 +if test "${gas_cv_assert_ok+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ + +/* check for requoting problems */ +static int a, b, c, d; +static char *s; +assert (!strcmp(s, "foo bar baz quux")); +/* check for newline handling */ +assert (a == b + || c == d); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gas_cv_assert_ok=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gas_cv_assert_ok=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $gas_cv_assert_ok" >&5 +echo "${ECHO_T}$gas_cv_assert_ok" >&6 +test $gas_cv_assert_ok = yes || +cat >>confdefs.h <<\_ACEOF +#define BROKEN_ASSERT 1 +_ACEOF + + + +# On some systems, the system header files may not declare malloc, realloc, +# and free. There are places where gas needs these functions to have been +# declared -- such as when taking their addresses. +gas_test_headers=" +#ifdef HAVE_MEMORY_H +#include +#endif +#ifdef HAVE_STRING_H +#include +#else +#ifdef HAVE_STRINGS_H +#include +#endif +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif +" + +# Does errno.h declare errno, or do we have to add a separate declaration +# for it? + +echo "$as_me:$LINENO: checking whether declaration is required for errno" >&5 +echo $ECHO_N "checking whether declaration is required for errno... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_errno+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef HAVE_ERRNO_H +#include +#endif + +int +main () +{ + +typedef int f; +f x; +x = (f) errno; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gas_cv_decl_needed_errno=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gas_cv_decl_needed_errno=yes +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_errno" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_errno" >&6 +if test $gas_cv_decl_needed_errno = yes; then + +cat >>confdefs.h <<\_ACEOF +#define NEED_DECLARATION_ERRNO 1 +_ACEOF + +fi + + +echo "$as_me:$LINENO: checking for a known getopt prototype in unistd.h" >&5 +echo $ECHO_N "checking for a known getopt prototype in unistd.h... $ECHO_C" >&6 +if test "${gas_cv_decl_getopt_unistd_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - - +#include int main () { -main (); +extern int getopt (int, char *const*, const char *); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_m_main=yes + gas_cv_decl_getopt_unistd_h=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_m_main=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +gas_cv_decl_getopt_unistd_h=no fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_main" >&5 -echo "${ECHO_T}$ac_cv_lib_m_main" >&6 -if test $ac_cv_lib_m_main = yes; then - LIBM="-lm" +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - ;; -esac +echo "$as_me:$LINENO: result: $gas_cv_decl_getopt_unistd_h" >&5 +echo "${ECHO_T}$gas_cv_decl_getopt_unistd_h" >&6 +if test $gas_cv_decl_getopt_unistd_h = yes; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_DECL_GETOPT 1 +_ACEOF - ;; -esac +fi -# Some non-ANSI preprocessors botch requoting inside strings. That's bad -# enough, but on some of those systems, the assert macro relies on requoting -# working properly! -echo "$as_me:$LINENO: checking for working assert macro" >&5 -echo $ECHO_N "checking for working assert macro... $ECHO_C" >&6 -if test "${gas_cv_assert_ok+set}" = set; then + +echo "$as_me:$LINENO: checking whether declaration is required for environ" >&5 +echo $ECHO_N "checking whether declaration is required for environ... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_environ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10289,19 +14669,14 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#include +$gas_test_headers int main () { -/* check for requoting problems */ -static int a, b, c, d; -static char *s; -assert (!strcmp(s, "foo bar baz quux")); -/* check for newline handling */ -assert (a == b - || c == d); +typedef char **f; +f x; +x = (f) environ; ; return 0; @@ -10316,7 +14691,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10328,50 +14704,30 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_assert_ok=yes + gas_cv_decl_needed_environ=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_assert_ok=no +gas_cv_decl_needed_environ=yes fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_assert_ok" >&5 -echo "${ECHO_T}$gas_cv_assert_ok" >&6 -test $gas_cv_assert_ok = yes || +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_environ" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_environ" >&6 +if test $gas_cv_decl_needed_environ = yes; then + cat >>confdefs.h <<\_ACEOF -#define BROKEN_ASSERT 1 +#define NEED_DECLARATION_ENVIRON 1 _ACEOF +fi -# On some systems, the system header files may not declare malloc, realloc, -# and free. There are places where gas needs these functions to have been -# declared -- such as when taking their addresses. -gas_test_headers=" -#ifdef HAVE_MEMORY_H -#include -#endif -#ifdef HAVE_STRING_H -#include -#else -#ifdef HAVE_STRINGS_H -#include -#endif -#endif -#ifdef HAVE_STDLIB_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -" - -echo "$as_me:$LINENO: checking whether declaration is required for strstr" >&5 -echo $ECHO_N "checking whether declaration is required for strstr... $ECHO_C" >&6 -if test "${gas_cv_decl_needed_strstr+set}" = set; then +echo "$as_me:$LINENO: checking whether declaration is required for ffs" >&5 +echo $ECHO_N "checking whether declaration is required for ffs... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_ffs+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10385,9 +14741,9 @@ int main () { -typedef char *(*f)(); +typedef int (*f)(int); f x; -x = (f) strstr; +x = (f) ffs; ; return 0; @@ -10402,7 +14758,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10414,30 +14771,30 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_decl_needed_strstr=no + gas_cv_decl_needed_ffs=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_decl_needed_strstr=yes +gas_cv_decl_needed_ffs=yes fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_decl_needed_strstr" >&5 -echo "${ECHO_T}$gas_cv_decl_needed_strstr" >&6 -if test $gas_cv_decl_needed_strstr = yes; then +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_ffs" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_ffs" >&6 +if test $gas_cv_decl_needed_ffs = yes; then cat >>confdefs.h <<\_ACEOF -#define NEED_DECLARATION_STRSTR 1 +#define NEED_DECLARATION_FFS 1 _ACEOF fi -echo "$as_me:$LINENO: checking whether declaration is required for malloc" >&5 -echo $ECHO_N "checking whether declaration is required for malloc... $ECHO_C" >&6 -if test "${gas_cv_decl_needed_malloc+set}" = set; then +echo "$as_me:$LINENO: checking whether declaration is required for free" >&5 +echo $ECHO_N "checking whether declaration is required for free... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_free+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10451,9 +14808,9 @@ int main () { -typedef char *(*f)(); +typedef void (*f)(); f x; -x = (f) malloc; +x = (f) free; ; return 0; @@ -10468,7 +14825,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10480,30 +14838,30 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_decl_needed_malloc=no + gas_cv_decl_needed_free=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_decl_needed_malloc=yes +gas_cv_decl_needed_free=yes fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_decl_needed_malloc" >&5 -echo "${ECHO_T}$gas_cv_decl_needed_malloc" >&6 -if test $gas_cv_decl_needed_malloc = yes; then +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_free" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_free" >&6 +if test $gas_cv_decl_needed_free = yes; then cat >>confdefs.h <<\_ACEOF -#define NEED_DECLARATION_MALLOC 1 +#define NEED_DECLARATION_FREE 1 _ACEOF fi -echo "$as_me:$LINENO: checking whether declaration is required for free" >&5 -echo $ECHO_N "checking whether declaration is required for free... $ECHO_C" >&6 -if test "${gas_cv_decl_needed_free+set}" = set; then +echo "$as_me:$LINENO: checking whether declaration is required for malloc" >&5 +echo $ECHO_N "checking whether declaration is required for malloc... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_malloc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10517,9 +14875,9 @@ int main () { -typedef void (*f)(); +typedef char *(*f)(); f x; -x = (f) free; +x = (f) malloc; ; return 0; @@ -10534,7 +14892,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10546,22 +14905,22 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_decl_needed_free=no + gas_cv_decl_needed_malloc=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_decl_needed_free=yes +gas_cv_decl_needed_malloc=yes fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_decl_needed_free" >&5 -echo "${ECHO_T}$gas_cv_decl_needed_free" >&6 -if test $gas_cv_decl_needed_free = yes; then +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_malloc" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_malloc" >&6 +if test $gas_cv_decl_needed_malloc = yes; then cat >>confdefs.h <<\_ACEOF -#define NEED_DECLARATION_FREE 1 +#define NEED_DECLARATION_MALLOC 1 _ACEOF fi @@ -10600,7 +14959,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10633,9 +14993,9 @@ _ACEOF fi -echo "$as_me:$LINENO: checking whether declaration is required for environ" >&5 -echo $ECHO_N "checking whether declaration is required for environ... $ECHO_C" >&6 -if test "${gas_cv_decl_needed_environ+set}" = set; then +echo "$as_me:$LINENO: checking whether declaration is required for strstr" >&5 +echo $ECHO_N "checking whether declaration is required for strstr... $ECHO_C" >&6 +if test "${gas_cv_decl_needed_strstr+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10649,9 +15009,9 @@ int main () { -typedef char **f; +typedef char *(*f)(); f x; -x = (f) environ; +x = (f) strstr; ; return 0; @@ -10666,7 +15026,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10678,33 +15039,30 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_decl_needed_environ=no + gas_cv_decl_needed_strstr=no else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_decl_needed_environ=yes +gas_cv_decl_needed_strstr=yes fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_decl_needed_environ" >&5 -echo "${ECHO_T}$gas_cv_decl_needed_environ" >&6 -if test $gas_cv_decl_needed_environ = yes; then +echo "$as_me:$LINENO: result: $gas_cv_decl_needed_strstr" >&5 +echo "${ECHO_T}$gas_cv_decl_needed_strstr" >&6 +if test $gas_cv_decl_needed_strstr = yes; then cat >>confdefs.h <<\_ACEOF -#define NEED_DECLARATION_ENVIRON 1 +#define NEED_DECLARATION_STRSTR 1 _ACEOF fi -# Does errno.h declare errno, or do we have to add a separate declaration -# for it? - -echo "$as_me:$LINENO: checking whether declaration is required for errno" >&5 -echo $ECHO_N "checking whether declaration is required for errno... $ECHO_C" >&6 -if test "${gas_cv_decl_needed_errno+set}" = set; then +echo "$as_me:$LINENO: checking whether vsnprintf is declared" >&5 +echo $ECHO_N "checking whether vsnprintf is declared... $ECHO_C" >&6 +if test "${ac_cv_have_decl_vsnprintf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -10713,67 +15071,85 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -#ifdef HAVE_ERRNO_H -#include -#endif - +$ac_includes_default int main () { - -typedef int f; -f x; -x = (f) errno; +#ifndef vsnprintf + char *p = (char *) vsnprintf; +#endif ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' + { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - gas_cv_decl_needed_errno=no + ac_cv_have_decl_vsnprintf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -gas_cv_decl_needed_errno=yes +ac_cv_have_decl_vsnprintf=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $gas_cv_decl_needed_errno" >&5 -echo "${ECHO_T}$gas_cv_decl_needed_errno" >&6 -if test $gas_cv_decl_needed_errno = yes; then +echo "$as_me:$LINENO: result: $ac_cv_have_decl_vsnprintf" >&5 +echo "${ECHO_T}$ac_cv_have_decl_vsnprintf" >&6 +if test $ac_cv_have_decl_vsnprintf = yes; then -cat >>confdefs.h <<\_ACEOF -#define NEED_DECLARATION_ERRNO 1 +cat >>confdefs.h <<_ACEOF +#define HAVE_DECL_VSNPRINTF 1 +_ACEOF + + +else + cat >>confdefs.h <<_ACEOF +#define HAVE_DECL_VSNPRINTF 0 _ACEOF + fi +case "${host}" in +*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*) + +cat >>confdefs.h <<\_ACEOF +#define USE_BINARY_FOPEN 1 +_ACEOF + ;; +esac + + + + + + + + ac_config_files="$ac_config_files Makefile doc/Makefile po/Makefile.in:po/Make-in" ac_config_commands="$ac_config_commands default" @@ -10891,6 +15267,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi +if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -11317,14 +15700,276 @@ if \$ac_cs_recheck; then exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi -_ACEOF +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS section. +# + +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +SHELL \ +ECHO \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + +# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it + # from automake. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" target_cpu_type=${target_cpu_type} cgen_cpu_prefix=${cgen_cpu_prefix} obj_format=${obj_format} @@ -11345,6 +15990,8 @@ do "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in:po/Make-in" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 @@ -11482,11 +16129,36 @@ s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@LIBTOOL@,$LIBTOOL,;t t +s,@SED@,$SED,;t t +s,@FGREP@,$FGREP,;t t +s,@GREP@,$GREP,;t t +s,@LD@,$LD,;t t +s,@DUMPBIN@,$DUMPBIN,;t t +s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t +s,@NM@,$NM,;t t s,@LN_S@,$LN_S,;t t +s,@OBJDUMP@,$OBJDUMP,;t t +s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t +s,@AR@,$AR,;t t +s,@ac_ct_AR@,$ac_ct_AR,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@LIBTOOL@,$LIBTOOL,;t t +s,@lt_ECHO@,$lt_ECHO,;t t +s,@DSYMUTIL@,$DSYMUTIL,;t t +s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t +s,@NMEDIT@,$NMEDIT,;t t +s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t +s,@LIPO@,$LIPO,;t t +s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t +s,@OTOOL@,$OTOOL,;t t +s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t +s,@OTOOL64@,$OTOOL64,;t t +s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t +s,@NO_WERROR@,$NO_WERROR,;t t s,@GDBINIT@,$GDBINIT,;t t s,@cgen_cpu_prefix@,$cgen_cpu_prefix,;t t s,@extra_objects@,$extra_objects,;t t @@ -11495,41 +16167,37 @@ s,@obj_format@,$obj_format,;t t s,@te_file@,$te_file,;t t s,@install_tooldir@,$install_tooldir,;t t s,@atof@,$atof,;t t -s,@BFDLIB@,$BFDLIB,;t t s,@OPCODES_LIB@,$OPCODES_LIB,;t t -s,@BFDVER_H@,$BFDVER_H,;t t -s,@ALL_OBJ_DEPS@,$ALL_OBJ_DEPS,;t t s,@YACC@,$YACC,;t t s,@LEX@,$LEX,;t t s,@LEXLIB@,$LEXLIB,;t t s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@ALLOCA@,$ALLOCA,;t t s,@USE_NLS@,$USE_NLS,;t t -s,@MSGFMT@,$MSGFMT,;t t -s,@GMSGFMT@,$GMSGFMT,;t t +s,@LIBINTL@,$LIBINTL,;t t +s,@LIBINTL_DEP@,$LIBINTL_DEP,;t t +s,@INCINTL@,$INCINTL,;t t s,@XGETTEXT@,$XGETTEXT,;t t -s,@USE_INCLUDED_LIBINTL@,$USE_INCLUDED_LIBINTL,;t t +s,@GMSGFMT@,$GMSGFMT,;t t +s,@POSUB@,$POSUB,;t t s,@CATALOGS@,$CATALOGS,;t t -s,@CATOBJEXT@,$CATOBJEXT,;t t s,@DATADIRNAME@,$DATADIRNAME,;t t -s,@GMOFILES@,$GMOFILES,;t t s,@INSTOBJEXT@,$INSTOBJEXT,;t t -s,@INTLDEPS@,$INTLDEPS,;t t -s,@INTLLIBS@,$INTLLIBS,;t t -s,@INTLOBJS@,$INTLOBJS,;t t -s,@POFILES@,$POFILES,;t t -s,@POSUB@,$POSUB,;t t -s,@INCLUDE_LOCALE_H@,$INCLUDE_LOCALE_H,;t t -s,@GT_NO@,$GT_NO,;t t -s,@GT_YES@,$GT_YES,;t t +s,@GENCAT@,$GENCAT,;t t +s,@CATOBJEXT@,$CATOBJEXT,;t t s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t -s,@l@,$l,;t t +s,@MSGFMT@,$MSGFMT,;t t +s,@MSGMERGE@,$MSGMERGE,;t t s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t s,@MAINT@,$MAINT,;t t +s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t +s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t +s,@ALLOCA@,$ALLOCA,;t t s,@LIBM@,$LIBM,;t t +s,@datarootdir@,$datarootdir,;t t +s,@docdir@,$docdir,;t t +s,@htmldir@,$htmldir,;t t +s,@pdfdir@,$pdfdir,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF @@ -11698,6 +16366,11 @@ esac *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -11736,12 +16409,6 @@ echo "$as_me: error: cannot find input file: $f" >&2;} fi;; esac done` || { (exit 1); exit 1; } - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub @@ -12215,6 +16882,742 @@ echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} done done ;; + libtool ) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + default-1 ) + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + GMOFILES= + UPDATEPOFILES= + DUMMYPOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done ;; default ) rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h @@ -12222,9 +17625,7 @@ done echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h if test "x$cgen_cpu_prefix" != x ; then echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h - fi - - sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile ;; + fi ;; esac done _ACEOF