X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=gdb%2Fser-unix.c;h=9a13acddbc85a75a45e5ec62e816e4b9af9f361d;hb=refs%2Fheads%2Fconcurrent-displaced-stepping-2020-04-01;hp=bc918941dcfd793dd93c3a28aafabcee03b03550;hpb=8a3fe4f86c51d363e10efed1046ebcbdc853ae99;p=deliverable%2Fbinutils-gdb.git
diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c
index bc918941dc..9a13acddbc 100644
--- a/gdb/ser-unix.c
+++ b/gdb/ser-unix.c
@@ -1,13 +1,12 @@
/* Serial interface for local (hardwired) serial ports on Un*x like systems
- Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
- 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 1992-2020 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
@@ -16,65 +15,46 @@
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see . */
#include "defs.h"
#include "serial.h"
+#include "ser-base.h"
#include "ser-unix.h"
#include
#include
#include "terminal.h"
#include
-#include
+#include "gdbsupport/gdb_sys_time.h"
-#include "gdb_string.h"
-#include "event-loop.h"
-
-#ifdef HAVE_TERMIOS
+#include "gdbsupport/gdb_select.h"
+#include "gdbcmd.h"
+#include "gdbsupport/filestuff.h"
+#include
+#include "inflow.h"
struct hardwire_ttystate
{
struct termios termios;
};
-#endif /* termios */
-
-#ifdef HAVE_TERMIO
-
-/* It is believed that all systems which have added job control to SVR3
- (e.g. sco) have also added termios. Even if not, trying to figure out
- all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
- bewildering. So we don't attempt it. */
-struct hardwire_ttystate
- {
- struct termio termio;
- };
-#endif /* termio */
-
-#ifdef HAVE_SGTTY
-struct hardwire_ttystate
- {
- struct sgttyb sgttyb;
- struct tchars tc;
- struct ltchars ltc;
- /* Line discipline flags. */
- int lmode;
- };
-#endif /* sgtty */
+#ifdef CRTSCTS
+/* Boolean to explicitly enable or disable h/w flow control. */
+static bool serial_hwflow;
+static void
+show_serial_hwflow (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Hardware flow control is %s.\n"), value);
+}
+#endif
static int hardwire_open (struct serial *scb, const char *name);
static void hardwire_raw (struct serial *scb);
-static int wait_for (struct serial *scb, int timeout);
-static int hardwire_readchar (struct serial *scb, int timeout);
-static int do_hardwire_readchar (struct serial *scb, int timeout);
-static int generic_readchar (struct serial *scb, int timeout,
- int (*do_readchar) (struct serial *scb,
- int timeout));
static int rate_to_code (int rate);
static int hardwire_setbaudrate (struct serial *scb, int rate);
+static int hardwire_setparity (struct serial *scb, int parity);
static void hardwire_close (struct serial *scb);
static int get_tty_state (struct serial *scb,
struct hardwire_ttystate * state);
@@ -82,8 +62,6 @@ static int set_tty_state (struct serial *scb,
struct hardwire_ttystate * state);
static serial_ttystate hardwire_get_tty_state (struct serial *scb);
static int hardwire_set_tty_state (struct serial *scb, serial_ttystate state);
-static int hardwire_noflush_set_tty_state (struct serial *, serial_ttystate,
- serial_ttystate);
static void hardwire_print_tty_state (struct serial *, serial_ttystate,
struct ui_file *);
static int hardwire_drain_output (struct serial *);
@@ -92,19 +70,12 @@ static int hardwire_flush_input (struct serial *);
static int hardwire_send_break (struct serial *);
static int hardwire_setstopbits (struct serial *, int);
-static int do_unix_readchar (struct serial *scb, int timeout);
-static timer_handler_func push_event;
-static handler_func fd_event;
-static void reschedule (struct serial *scb);
-
-void _initialize_ser_hardwire (void);
-
-/* Open up a real live device for serial I/O */
+/* Open up a real live device for serial I/O. */
static int
hardwire_open (struct serial *scb, const char *name)
{
- scb->fd = open (name, O_RDWR);
+ scb->fd = gdb_open_cloexec (name, O_RDWR, 0);
if (scb->fd < 0)
return -1;
@@ -114,117 +85,53 @@ hardwire_open (struct serial *scb, const char *name)
static int
get_tty_state (struct serial *scb, struct hardwire_ttystate *state)
{
-#ifdef HAVE_TERMIOS
if (tcgetattr (scb->fd, &state->termios) < 0)
return -1;
return 0;
-#endif
-
-#ifdef HAVE_TERMIO
- if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
- return -1;
- return 0;
-#endif
-
-#ifdef HAVE_SGTTY
- if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
- return -1;
-
- return 0;
-#endif
}
static int
set_tty_state (struct serial *scb, struct hardwire_ttystate *state)
{
-#ifdef HAVE_TERMIOS
if (tcsetattr (scb->fd, TCSANOW, &state->termios) < 0)
return -1;
return 0;
-#endif
-
-#ifdef HAVE_TERMIO
- if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
- return -1;
- return 0;
-#endif
-
-#ifdef HAVE_SGTTY
- if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
- return -1;
- if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
- return -1;
-
- return 0;
-#endif
}
static serial_ttystate
hardwire_get_tty_state (struct serial *scb)
{
- struct hardwire_ttystate *state;
-
- state = (struct hardwire_ttystate *) xmalloc (sizeof *state);
+ struct hardwire_ttystate *state = XNEW (struct hardwire_ttystate);
if (get_tty_state (scb, state))
- return NULL;
+ {
+ xfree (state);
+ return NULL;
+ }
return (serial_ttystate) state;
}
-static int
-hardwire_set_tty_state (struct serial *scb, serial_ttystate ttystate)
+static serial_ttystate
+hardwire_copy_tty_state (struct serial *scb, serial_ttystate ttystate)
{
- struct hardwire_ttystate *state;
+ struct hardwire_ttystate *state = XNEW (struct hardwire_ttystate);
- state = (struct hardwire_ttystate *) ttystate;
+ *state = *(struct hardwire_ttystate *) ttystate;
- return set_tty_state (scb, state);
+ return (serial_ttystate) state;
}
static int
-hardwire_noflush_set_tty_state (struct serial *scb,
- serial_ttystate new_ttystate,
- serial_ttystate old_ttystate)
+hardwire_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
- struct hardwire_ttystate new_state;
-#ifdef HAVE_SGTTY
- struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
-#endif
-
- new_state = *(struct hardwire_ttystate *) new_ttystate;
-
- /* Don't change in or out of raw mode; we don't want to flush input.
- termio and termios have no such restriction; for them flushing input
- is separate from setting the attributes. */
-
-#ifdef HAVE_SGTTY
- if (state->sgttyb.sg_flags & RAW)
- new_state.sgttyb.sg_flags |= RAW;
- else
- new_state.sgttyb.sg_flags &= ~RAW;
+ struct hardwire_ttystate *state;
- /* I'm not sure whether this is necessary; the manpage just mentions
- RAW not CBREAK. */
- if (state->sgttyb.sg_flags & CBREAK)
- new_state.sgttyb.sg_flags |= CBREAK;
- else
- new_state.sgttyb.sg_flags &= ~CBREAK;
-#endif
+ state = (struct hardwire_ttystate *) ttystate;
- return set_tty_state (scb, &new_state);
+ return set_tty_state (scb, state);
}
static void
@@ -235,7 +142,6 @@ hardwire_print_tty_state (struct serial *scb,
struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
int i;
-#ifdef HAVE_TERMIOS
fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
(int) state->termios.c_iflag,
(int) state->termios.c_oflag);
@@ -251,133 +157,38 @@ hardwire_print_tty_state (struct serial *scb,
for (i = 0; i < NCCS; i += 1)
fprintf_filtered (stream, "0x%x ", state->termios.c_cc[i]);
fprintf_filtered (stream, "\n");
-#endif
-
-#ifdef HAVE_TERMIO
- fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
- state->termio.c_iflag, state->termio.c_oflag);
- fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
- state->termio.c_cflag, state->termio.c_lflag,
- state->termio.c_line);
- fprintf_filtered (stream, "c_cc: ");
- for (i = 0; i < NCC; i += 1)
- fprintf_filtered (stream, "0x%x ", state->termio.c_cc[i]);
- fprintf_filtered (stream, "\n");
-#endif
-
-#ifdef HAVE_SGTTY
- fprintf_filtered (stream, "sgttyb.sg_flags = 0x%x.\n",
- state->sgttyb.sg_flags);
-
- fprintf_filtered (stream, "tchars: ");
- for (i = 0; i < (int) sizeof (struct tchars); i++)
- fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->tc)[i]);
- fprintf_filtered (stream, "\n");
-
- fprintf_filtered (stream, "ltchars: ");
- for (i = 0; i < (int) sizeof (struct ltchars); i++)
- fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->ltc)[i]);
- fprintf_filtered (stream, "\n");
-
- fprintf_filtered (stream, "lmode: 0x%x\n", state->lmode);
-#endif
}
-/* Wait for the output to drain away, as opposed to flushing (discarding) it */
+/* Wait for the output to drain away, as opposed to flushing
+ (discarding) it. */
static int
hardwire_drain_output (struct serial *scb)
{
-#ifdef HAVE_TERMIOS
- return tcdrain (scb->fd);
-#endif
+ /* Ignore SIGTTOU which may occur during the drain. */
+ scoped_ignore_sigttou ignore_sigttou;
-#ifdef HAVE_TERMIO
- return ioctl (scb->fd, TCSBRK, 1);
-#endif
-
-#ifdef HAVE_SGTTY
- /* Get the current state and then restore it using TIOCSETP,
- which should cause the output to drain and pending input
- to be discarded. */
- {
- struct hardwire_ttystate state;
- if (get_tty_state (scb, &state))
- {
- return (-1);
- }
- else
- {
- return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
- }
- }
-#endif
+ return tcdrain (scb->fd);
}
static int
hardwire_flush_output (struct serial *scb)
{
-#ifdef HAVE_TERMIOS
return tcflush (scb->fd, TCOFLUSH);
-#endif
-
-#ifdef HAVE_TERMIO
- return ioctl (scb->fd, TCFLSH, 1);
-#endif
-
-#ifdef HAVE_SGTTY
- /* This flushes both input and output, but we can't do better. */
- return ioctl (scb->fd, TIOCFLUSH, 0);
-#endif
}
static int
hardwire_flush_input (struct serial *scb)
{
- ser_unix_flush_input (scb);
+ ser_base_flush_input (scb);
-#ifdef HAVE_TERMIOS
return tcflush (scb->fd, TCIFLUSH);
-#endif
-
-#ifdef HAVE_TERMIO
- return ioctl (scb->fd, TCFLSH, 0);
-#endif
-
-#ifdef HAVE_SGTTY
- /* This flushes both input and output, but we can't do better. */
- return ioctl (scb->fd, TIOCFLUSH, 0);
-#endif
}
static int
hardwire_send_break (struct serial *scb)
{
-#ifdef HAVE_TERMIOS
return tcsendbreak (scb->fd, 0);
-#endif
-
-#ifdef HAVE_TERMIO
- return ioctl (scb->fd, TCSBRK, 0);
-#endif
-
-#ifdef HAVE_SGTTY
- {
- int status;
- struct timeval timeout;
-
- status = ioctl (scb->fd, TIOCSBRK, 0);
-
- /* Can't use usleep; it doesn't exist in BSD 4.2. */
- /* Note that if this select() is interrupted by a signal it will not wait
- the full length of time. I think that is OK. */
- timeout.tv_sec = 0;
- timeout.tv_usec = 250000;
- select (0, 0, 0, 0, &timeout);
- status = ioctl (scb->fd, TIOCCBRK, 0);
- return status;
- }
-#endif
}
static void
@@ -386,253 +197,35 @@ hardwire_raw (struct serial *scb)
struct hardwire_ttystate state;
if (get_tty_state (scb, &state))
- fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
+ fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n",
+ safe_strerror (errno));
-#ifdef HAVE_TERMIOS
state.termios.c_iflag = 0;
state.termios.c_oflag = 0;
state.termios.c_lflag = 0;
- state.termios.c_cflag &= ~(CSIZE | PARENB);
+ state.termios.c_cflag &= ~CSIZE;
state.termios.c_cflag |= CLOCAL | CS8;
- state.termios.c_cc[VMIN] = 0;
- state.termios.c_cc[VTIME] = 0;
-#endif
-
-#ifdef HAVE_TERMIO
- state.termio.c_iflag = 0;
- state.termio.c_oflag = 0;
- state.termio.c_lflag = 0;
- state.termio.c_cflag &= ~(CSIZE | PARENB);
- state.termio.c_cflag |= CLOCAL | CS8;
- state.termio.c_cc[VMIN] = 0;
- state.termio.c_cc[VTIME] = 0;
+#ifdef CRTSCTS
+ /* h/w flow control. */
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTSCTS;
+ else
+ state.termios.c_cflag &= ~CRTSCTS;
+#ifdef CRTS_IFLOW
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTS_IFLOW;
+ else
+ state.termios.c_cflag &= ~CRTS_IFLOW;
#endif
-
-#ifdef HAVE_SGTTY
- state.sgttyb.sg_flags |= RAW | ANYP;
- state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
#endif
-
- scb->current_timeout = 0;
+ state.termios.c_cc[VMIN] = 0;
+ state.termios.c_cc[VTIME] = 0;
if (set_tty_state (scb, &state))
- fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
-}
-
-/* Wait for input on scb, with timeout seconds. Returns 0 on success,
- otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
-
- For termio{s}, we actually just setup VTIME if necessary, and let the
- timeout occur in the read() in hardwire_read().
- */
-
-/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
- flushed. . */
-
-/* NOTE: cagney/1999-09-30: Much of the code below is dead. The only
- possible values of the TIMEOUT parameter are ONE and ZERO.
- Consequently all the code that tries to handle the possability of
- an overflowed timer is unnecessary. */
-
-static int
-wait_for (struct serial *scb, int timeout)
-{
-#ifdef HAVE_SGTTY
- while (1)
- {
- struct timeval tv;
- fd_set readfds;
- int numfds;
-
- /* NOTE: Some OS's can scramble the READFDS when the select()
- call fails (ex the kernel with Red Hat 5.2). Initialize all
- arguments before each call. */
-
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO (&readfds);
- FD_SET (scb->fd, &readfds);
-
- if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, 0, &tv);
- else
- numfds = select (scb->fd + 1, &readfds, 0, 0, 0);
-
- if (numfds <= 0)
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
-
- return 0;
- }
-#endif /* HAVE_SGTTY */
-
-#if defined HAVE_TERMIO || defined HAVE_TERMIOS
- if (timeout == scb->current_timeout)
- return 0;
-
- scb->current_timeout = timeout;
-
- {
- struct hardwire_ttystate state;
-
- if (get_tty_state (scb, &state))
- fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
-
-#ifdef HAVE_TERMIOS
- if (timeout < 0)
- {
- /* No timeout. */
- state.termios.c_cc[VTIME] = 0;
- state.termios.c_cc[VMIN] = 1;
- }
- else
- {
- state.termios.c_cc[VMIN] = 0;
- state.termios.c_cc[VTIME] = timeout * 10;
- if (state.termios.c_cc[VTIME] != timeout * 10)
- {
-
- /* If c_cc is an 8-bit signed character, we can't go
- bigger than this. If it is always unsigned, we could use
- 25. */
-
- scb->current_timeout = 12;
- state.termios.c_cc[VTIME] = scb->current_timeout * 10;
- scb->timeout_remaining = timeout - scb->current_timeout;
- }
- }
-#endif
-
-#ifdef HAVE_TERMIO
- if (timeout < 0)
- {
- /* No timeout. */
- state.termio.c_cc[VTIME] = 0;
- state.termio.c_cc[VMIN] = 1;
- }
- else
- {
- state.termio.c_cc[VMIN] = 0;
- state.termio.c_cc[VTIME] = timeout * 10;
- if (state.termio.c_cc[VTIME] != timeout * 10)
- {
- /* If c_cc is an 8-bit signed character, we can't go
- bigger than this. If it is always unsigned, we could use
- 25. */
-
- scb->current_timeout = 12;
- state.termio.c_cc[VTIME] = scb->current_timeout * 10;
- scb->timeout_remaining = timeout - scb->current_timeout;
- }
- }
-#endif
-
- if (set_tty_state (scb, &state))
- fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
-
- return 0;
- }
-#endif /* HAVE_TERMIO || HAVE_TERMIOS */
+ fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n",
+ safe_strerror (errno));
}
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line
- dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
-
-/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
- flushed. */
-
-/* NOTE: cagney/1999-09-16: This function is not identical to
- ser_unix_readchar() as part of replacing it with ser_unix*()
- merging will be required - this code handles the case where read()
- times out due to no data while ser_unix_readchar() doesn't expect
- that. */
-
-static int
-do_hardwire_readchar (struct serial *scb, int timeout)
-{
- int status, delta;
- int detach = 0;
-
- if (timeout > 0)
- timeout++;
-
- /* We have to be able to keep the GUI alive here, so we break the
- original timeout into steps of 1 second, running the "keep the
- GUI alive" hook each time through the loop.
-
- Also, timeout = 0 means to poll, so we just set the delta to 0,
- so we will only go through the loop once. */
-
- delta = (timeout == 0 ? 0 : 1);
- while (1)
- {
-
- /* N.B. The UI may destroy our world (for instance by calling
- remote_stop,) in which case we want to get out of here as
- quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The
- deprecated_ui_loop_hook signals that we should exit by
- returning 1. */
-
- if (deprecated_ui_loop_hook)
- detach = deprecated_ui_loop_hook (0);
-
- if (detach)
- return SERIAL_TIMEOUT;
-
- scb->timeout_remaining = (timeout < 0 ? timeout : timeout - delta);
- status = wait_for (scb, delta);
-
- if (status < 0)
- return status;
-
- status = read (scb->fd, scb->buf, BUFSIZ);
-
- if (status <= 0)
- {
- if (status == 0)
- {
- /* Zero characters means timeout (it could also be EOF, but
- we don't (yet at least) distinguish). */
- if (scb->timeout_remaining > 0)
- {
- timeout = scb->timeout_remaining;
- continue;
- }
- else if (scb->timeout_remaining < 0)
- continue;
- else
- return SERIAL_TIMEOUT;
- }
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from read */
- }
-
- scb->bufcnt = status;
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
- }
-}
-
-static int
-hardwire_readchar (struct serial *scb, int timeout)
-{
- return generic_readchar (scb, timeout, do_hardwire_readchar);
-}
-
-
#ifndef B19200
#define B19200 EXTA
#endif
@@ -748,30 +341,31 @@ rate_to_code (int rate)
for (i = 0; baudtab[i].rate != -1; i++)
{
- /* test for perfect macth. */
+ /* test for perfect macth. */
if (rate == baudtab[i].rate)
return baudtab[i].code;
else
{
- /* check if it is in between valid values. */
+ /* check if it is in between valid values. */
if (rate < baudtab[i].rate)
{
if (i)
{
- warning (_("Invalid baud rate %d. Closest values are %d and %d."),
- rate, baudtab[i - 1].rate, baudtab[i].rate);
+ warning (_("Invalid baud rate %d. "
+ "Closest values are %d and %d."),
+ rate, baudtab[i - 1].rate, baudtab[i].rate);
}
else
{
warning (_("Invalid baud rate %d. Minimum value is %d."),
- rate, baudtab[0].rate);
+ rate, baudtab[0].rate);
}
return -1;
}
}
}
- /* The requested speed was too large. */
+ /* The requested speed was too large. */
warning (_("Invalid baud rate %d. Maximum value is %d."),
rate, baudtab[i - 1].rate);
return -1;
@@ -786,7 +380,7 @@ hardwire_setbaudrate (struct serial *scb, int rate)
if (baud_code < 0)
{
/* The baud rate was not valid.
- A warning has already been issued. */
+ A warning has already been issued. */
errno = EINVAL;
return -1;
}
@@ -794,24 +388,8 @@ hardwire_setbaudrate (struct serial *scb, int rate)
if (get_tty_state (scb, &state))
return -1;
-#ifdef HAVE_TERMIOS
cfsetospeed (&state.termios, baud_code);
cfsetispeed (&state.termios, baud_code);
-#endif
-
-#ifdef HAVE_TERMIO
-#ifndef CIBAUD
-#define CIBAUD CBAUD
-#endif
-
- state.termio.c_cflag &= ~(CBAUD | CIBAUD);
- state.termio.c_cflag |= baud_code;
-#endif
-
-#ifdef HAVE_SGTTY
- state.sgttyb.sg_ispeed = baud_code;
- state.sgttyb.sg_ospeed = baud_code;
-#endif
return set_tty_state (scb, &state);
}
@@ -838,528 +416,115 @@ hardwire_setstopbits (struct serial *scb, int num)
return 1;
}
-#ifdef HAVE_TERMIOS
if (!newbit)
state.termios.c_cflag &= ~CSTOPB;
else
state.termios.c_cflag |= CSTOPB; /* two bits */
-#endif
-
-#ifdef HAVE_TERMIO
- if (!newbit)
- state.termio.c_cflag &= ~CSTOPB;
- else
- state.termio.c_cflag |= CSTOPB; /* two bits */
-#endif
-
-#ifdef HAVE_SGTTY
- return 0; /* sgtty doesn't support this */
-#endif
return set_tty_state (scb, &state);
}
-static void
-hardwire_close (struct serial *scb)
-{
- if (scb->fd < 0)
- return;
-
- close (scb->fd);
- scb->fd = -1;
-}
-
-
-/* Generic operations used by all UNIX/FD based serial interfaces. */
-
-serial_ttystate
-ser_unix_nop_get_tty_state (struct serial *scb)
-{
- /* allocate a dummy */
- return (serial_ttystate) XMALLOC (int);
-}
-
-int
-ser_unix_nop_set_tty_state (struct serial *scb, serial_ttystate ttystate)
-{
- return 0;
-}
-
-void
-ser_unix_nop_raw (struct serial *scb)
-{
- return; /* Always in raw mode */
-}
-
-/* Wait for input on scb, with timeout seconds. Returns 0 on success,
- otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
-
-int
-ser_unix_wait_for (struct serial *scb, int timeout)
-{
- while (1)
- {
- int numfds;
- struct timeval tv;
- fd_set readfds, exceptfds;
-
- /* NOTE: Some OS's can scramble the READFDS when the select()
- call fails (ex the kernel with Red Hat 5.2). Initialize all
- arguments before each call. */
-
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO (&readfds);
- FD_ZERO (&exceptfds);
- FD_SET (scb->fd, &readfds);
- FD_SET (scb->fd, &exceptfds);
-
- if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
- else
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
-
- if (numfds <= 0)
- {
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
- }
-
- return 0;
- }
-}
-
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns -2 if timeout expired, EOF if line dropped
- dead, or -3 for any other error (see errno in that case). */
+/* Implement the "setparity" serial_ops callback. */
static int
-do_unix_readchar (struct serial *scb, int timeout)
+hardwire_setparity (struct serial *scb, int parity)
{
- int status;
- int delta;
-
- /* We have to be able to keep the GUI alive here, so we break the
- original timeout into steps of 1 second, running the "keep the
- GUI alive" hook each time through the loop.
-
- Also, timeout = 0 means to poll, so we just set the delta to 0,
- so we will only go through the loop once. */
-
- delta = (timeout == 0 ? 0 : 1);
- while (1)
- {
-
- /* N.B. The UI may destroy our world (for instance by calling
- remote_stop,) in which case we want to get out of here as
- quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The
- deprecated_ui_loop_hook signals that we should exit by
- returning 1. */
-
- if (deprecated_ui_loop_hook)
- {
- if (deprecated_ui_loop_hook (0))
- return SERIAL_TIMEOUT;
- }
-
- status = ser_unix_wait_for (scb, delta);
- if (timeout > 0)
- timeout -= delta;
-
- /* If we got a character or an error back from wait_for, then we can
- break from the loop before the timeout is completed. */
-
- if (status != SERIAL_TIMEOUT)
- {
- break;
- }
-
- /* If we have exhausted the original timeout, then generate
- a SERIAL_TIMEOUT, and pass it out of the loop. */
-
- else if (timeout == 0)
- {
- status = SERIAL_TIMEOUT;
- break;
- }
- }
+ struct hardwire_ttystate state;
+ int newparity = 0;
- if (status < 0)
- return status;
+ if (get_tty_state (scb, &state))
+ return -1;
- while (1)
+ switch (parity)
{
- status = read (scb->fd, scb->buf, BUFSIZ);
- if (status != -1 || errno != EINTR)
- break;
+ case GDBPARITY_NONE:
+ newparity = 0;
+ break;
+ case GDBPARITY_ODD:
+ newparity = PARENB | PARODD;
+ break;
+ case GDBPARITY_EVEN:
+ newparity = PARENB;
+ break;
+ default:
+ internal_warning (__FILE__, __LINE__,
+ "Incorrect parity value: %d", parity);
+ return -1;
}
- if (status <= 0)
- {
- if (status == 0)
- return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
- distinguish between EOF & timeouts
- someday] */
- else
- return SERIAL_ERROR; /* Got an error from read */
- }
+ state.termios.c_cflag &= ~(PARENB | PARODD);
+ state.termios.c_cflag |= newparity;
- scb->bufcnt = status;
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
+ return set_tty_state (scb, &state);
}
-/* Perform operations common to both old and new readchar. */
-
-/* Return the next character from the input FIFO. If the FIFO is
- empty, call the SERIAL specific routine to try and read in more
- characters.
-
- Initially data from the input FIFO is returned (fd_event()
- pre-reads the input into that FIFO. Once that has been emptied,
- further data is obtained by polling the input FD using the device
- specific readchar() function. Note: reschedule() is called after
- every read. This is because there is no guarentee that the lower
- level fd_event() poll_event() code (which also calls reschedule())
- will be called. */
-static int
-generic_readchar (struct serial *scb, int timeout,
- int (do_readchar) (struct serial *scb, int timeout))
+static void
+hardwire_close (struct serial *scb)
{
- int ch;
- if (scb->bufcnt > 0)
- {
- ch = *scb->bufp;
- scb->bufcnt--;
- scb->bufp++;
- }
- else if (scb->bufcnt < 0)
- {
- /* Some errors/eof are are sticky. */
- ch = scb->bufcnt;
- }
- else
- {
- ch = do_readchar (scb, timeout);
- if (ch < 0)
- {
- switch ((enum serial_rc) ch)
- {
- case SERIAL_EOF:
- case SERIAL_ERROR:
- /* Make the error/eof stick. */
- scb->bufcnt = ch;
- break;
- case SERIAL_TIMEOUT:
- scb->bufcnt = 0;
- break;
- }
- }
- }
- reschedule (scb);
- return ch;
-}
+ if (scb->fd < 0)
+ return;
-int
-ser_unix_readchar (struct serial *scb, int timeout)
-{
- return generic_readchar (scb, timeout, do_unix_readchar);
+ close (scb->fd);
+ scb->fd = -1;
}
+
+
-int
-ser_unix_nop_noflush_set_tty_state (struct serial *scb,
- serial_ttystate new_ttystate,
- serial_ttystate old_ttystate)
-{
- return 0;
-}
+/* The hardwire ops. */
+
+static const struct serial_ops hardwire_ops =
+{
+ "hardwire",
+ hardwire_open,
+ hardwire_close,
+ NULL,
+ ser_base_readchar,
+ ser_base_write,
+ hardwire_flush_output,
+ hardwire_flush_input,
+ hardwire_send_break,
+ hardwire_raw,
+ hardwire_get_tty_state,
+ hardwire_copy_tty_state,
+ hardwire_set_tty_state,
+ hardwire_print_tty_state,
+ hardwire_setbaudrate,
+ hardwire_setstopbits,
+ hardwire_setparity,
+ hardwire_drain_output,
+ ser_base_async,
+ ser_unix_read_prim,
+ ser_unix_write_prim
+};
+void _initialize_ser_hardwire ();
void
-ser_unix_nop_print_tty_state (struct serial *scb,
- serial_ttystate ttystate,
- struct ui_file *stream)
-{
- /* Nothing to print. */
- return;
-}
-
-int
-ser_unix_nop_setbaudrate (struct serial *scb, int rate)
-{
- return 0; /* Never fails! */
-}
-
-int
-ser_unix_nop_setstopbits (struct serial *scb, int num)
-{
- return 0; /* Never fails! */
-}
-
-int
-ser_unix_write (struct serial *scb, const char *str, int len)
+_initialize_ser_hardwire ()
{
- int cc;
+ serial_add_interface (&hardwire_ops);
- while (len > 0)
- {
- cc = write (scb->fd, str, len);
-
- if (cc < 0)
- return 1;
- len -= cc;
- str += cc;
- }
- return 0;
-}
-
-int
-ser_unix_nop_flush_output (struct serial *scb)
-{
- return 0;
-}
-
-int
-ser_unix_flush_input (struct serial *scb)
-{
- if (scb->bufcnt >= 0)
- {
- scb->bufcnt = 0;
- scb->bufp = scb->buf;
- return 0;
- }
- else
- return SERIAL_ERROR;
+#ifdef CRTSCTS
+ add_setshow_boolean_cmd ("remoteflow", no_class,
+ &serial_hwflow, _("\
+Set use of hardware flow control for remote serial I/O."), _("\
+Show use of hardware flow control for remote serial I/O."), _("\
+Enable or disable hardware flow control (RTS/CTS) on the serial port\n\
+when debugging using remote targets."),
+ NULL,
+ show_serial_hwflow,
+ &setlist, &showlist);
+#endif
}
int
-ser_unix_nop_send_break (struct serial *scb)
+ser_unix_read_prim (struct serial *scb, size_t count)
{
- return 0;
+ return read (scb->fd, scb->buf, count);
}
int
-ser_unix_nop_drain_output (struct serial *scb)
-{
- return 0;
-}
-
-
-
-/* Event handling for ASYNC serial code.
-
- At any time the SERIAL device either: has an empty FIFO and is
- waiting on a FD event; or has a non-empty FIFO/error condition and
- is constantly scheduling timer events.
-
- ASYNC only stops pestering its client when it is de-async'ed or it
- is told to go away. */
-
-/* Value of scb->async_state: */
-enum {
- /* >= 0 (TIMER_SCHEDULED) */
- /* The ID of the currently scheduled timer event. This state is
- rarely encountered. Timer events are one-off so as soon as the
- event is delivered the state is shanged to NOTHING_SCHEDULED. */
- FD_SCHEDULED = -1,
- /* The fd_event() handler is scheduled. It is called when ever the
- file descriptor becomes ready. */
- NOTHING_SCHEDULED = -2
- /* Either no task is scheduled (just going into ASYNC mode) or a
- timer event has just gone off and the current state has been
- forced into nothing scheduled. */
-};
-
-/* Identify and schedule the next ASYNC task based on scb->async_state
- and scb->buf* (the input FIFO). A state machine is used to avoid
- the need to make redundant calls into the event-loop - the next
- scheduled task is only changed when needed. */
-
-static void
-reschedule (struct serial *scb)
-{
- if (serial_is_async_p (scb))
- {
- int next_state;
- switch (scb->async_state)
- {
- case FD_SCHEDULED:
- if (scb->bufcnt == 0)
- next_state = FD_SCHEDULED;
- else
- {
- delete_file_handler (scb->fd);
- next_state = create_timer (0, push_event, scb);
- }
- break;
- case NOTHING_SCHEDULED:
- if (scb->bufcnt == 0)
- {
- add_file_handler (scb->fd, fd_event, scb);
- next_state = FD_SCHEDULED;
- }
- else
- {
- next_state = create_timer (0, push_event, scb);
- }
- break;
- default: /* TIMER SCHEDULED */
- if (scb->bufcnt == 0)
- {
- delete_timer (scb->async_state);
- add_file_handler (scb->fd, fd_event, scb);
- next_state = FD_SCHEDULED;
- }
- else
- next_state = scb->async_state;
- break;
- }
- if (serial_debug_p (scb))
- {
- switch (next_state)
- {
- case FD_SCHEDULED:
- if (scb->async_state != FD_SCHEDULED)
- fprintf_unfiltered (gdb_stdlog, "[fd%d->fd-scheduled]\n",
- scb->fd);
- break;
- default: /* TIMER SCHEDULED */
- if (scb->async_state == FD_SCHEDULED)
- fprintf_unfiltered (gdb_stdlog, "[fd%d->timer-scheduled]\n",
- scb->fd);
- break;
- }
- }
- scb->async_state = next_state;
- }
-}
-
-/* FD_EVENT: This is scheduled when the input FIFO is empty (and there
- is no pending error). As soon as data arrives, it is read into the
- input FIFO and the client notified. The client should then drain
- the FIFO using readchar(). If the FIFO isn't immediatly emptied,
- push_event() is used to nag the client until it is. */
-
-static void
-fd_event (int error, void *context)
-{
- struct serial *scb = context;
- if (error != 0)
- {
- scb->bufcnt = SERIAL_ERROR;
- }
- else if (scb->bufcnt == 0)
- {
- /* Prime the input FIFO. The readchar() function is used to
- pull characters out of the buffer. See also
- generic_readchar(). */
- int nr;
- do
- {
- nr = read (scb->fd, scb->buf, BUFSIZ);
- }
- while (nr == -1 && errno == EINTR);
- if (nr == 0)
- {
- scb->bufcnt = SERIAL_EOF;
- }
- else if (nr > 0)
- {
- scb->bufcnt = nr;
- scb->bufp = scb->buf;
- }
- else
- {
- scb->bufcnt = SERIAL_ERROR;
- }
- }
- scb->async_handler (scb, scb->async_context);
- reschedule (scb);
-}
-
-/* PUSH_EVENT: The input FIFO is non-empty (or there is a pending
- error). Nag the client until all the data has been read. In the
- case of errors, the client will need to close or de-async the
- device before naging stops. */
-
-static void
-push_event (void *context)
-{
- struct serial *scb = context;
- scb->async_state = NOTHING_SCHEDULED; /* Timers are one-off */
- scb->async_handler (scb, scb->async_context);
- /* re-schedule */
- reschedule (scb);
-}
-
-/* Put the SERIAL device into/out-of ASYNC mode. */
-
-void
-ser_unix_async (struct serial *scb,
- int async_p)
-{
- if (async_p)
- {
- /* Force a re-schedule. */
- scb->async_state = NOTHING_SCHEDULED;
- if (serial_debug_p (scb))
- fprintf_unfiltered (gdb_stdlog, "[fd%d->asynchronous]\n",
- scb->fd);
- reschedule (scb);
- }
- else
- {
- if (serial_debug_p (scb))
- fprintf_unfiltered (gdb_stdlog, "[fd%d->synchronous]\n",
- scb->fd);
- /* De-schedule whatever tasks are currently scheduled. */
- switch (scb->async_state)
- {
- case FD_SCHEDULED:
- delete_file_handler (scb->fd);
- break;
- case NOTHING_SCHEDULED:
- break;
- default: /* TIMER SCHEDULED */
- delete_timer (scb->async_state);
- break;
- }
- }
-}
-
-void
-_initialize_ser_hardwire (void)
+ser_unix_write_prim (struct serial *scb, const void *buf, size_t len)
{
- struct serial_ops *ops = XMALLOC (struct serial_ops);
- memset (ops, 0, sizeof (struct serial_ops));
- ops->name = "hardwire";
- ops->next = 0;
- ops->open = hardwire_open;
- ops->close = hardwire_close;
- /* FIXME: Don't replace this with the equivalent ser_unix*() until
- the old TERMIOS/SGTTY/... timer code has been flushed. cagney
- 1999-09-16. */
- ops->readchar = hardwire_readchar;
- ops->write = ser_unix_write;
- ops->flush_output = hardwire_flush_output;
- ops->flush_input = hardwire_flush_input;
- ops->send_break = hardwire_send_break;
- ops->go_raw = hardwire_raw;
- ops->get_tty_state = hardwire_get_tty_state;
- ops->set_tty_state = hardwire_set_tty_state;
- ops->print_tty_state = hardwire_print_tty_state;
- ops->noflush_set_tty_state = hardwire_noflush_set_tty_state;
- ops->setbaudrate = hardwire_setbaudrate;
- ops->setstopbits = hardwire_setstopbits;
- ops->drain_output = hardwire_drain_output;
- ops->async = ser_unix_async;
- serial_add_interface (ops);
+ return write (scb->fd, buf, len);
}