X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=gdb%2Ftestsuite%2Fgdb.base%2Fdefault.exp;h=ab74bdbadbefb0264190a1d9d2a94ab08c7aad82;hb=316935f0ad534e72f4e7d607d933a4ab71963f09;hp=528d5a99f55be351b75f6f363cb713c0cf558d85;hpb=dc9e099fc0eced486ae2b49455c9da113c11f4ff;p=deliverable%2Fbinutils-gdb.git diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index 528d5a99f5..ab74bdbadb 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -1,28 +1,24 @@ -# Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 1998 -# Free Software Foundation, Inc. +# Copyright 1988-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or +# the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. -# +# # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -# +# # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu +# along with this program. If not, see . # Start with a fresh gdb gdb_exit gdb_start +set prev_timeout $timeout set timeout 60 # @@ -33,39 +29,36 @@ set timeout 60 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file" -setup_xfail "mips-idt-*" -send_gdb "attach\n" -gdb_expect { - -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ - { pass "attach" } - -re "You can't do that when your target is `None'.*$gdb_prompt $"\ - { pass "attach" } - -re "You can't do that without a process to debug.*$gdb_prompt $"\ - { pass "attach" } - -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ - { pass "attach" } - -re "Kill it. .y or n." { - send_gdb "y\n" - exp_continue +# test append +gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*" +gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*" +gdb_test "append memory" "Missing filename\." +gdb_test "append value" "Missing filename\." +gdb_test "append binary memory" "Missing filename\." +gdb_test "append binary value" "Missing filename\." + +if !$use_gdb_stub { + gdb_test_multiple "attach" "attach" { + -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ + { pass "attach" } + -re "You can't do that when your target is `None'.*$gdb_prompt $"\ + { pass "attach" } + -re "You can't do that without a process to debug.*$gdb_prompt $"\ + { pass "attach" } + -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ + { pass "attach" } + -re "Kill it. .y or n." { + send_gdb "y\n" + exp_continue + } } - -re "$gdb_prompt $" { fail "attach" } - timeout { fail "(timeout) attach" } -} - -# FIXME: attach kills the udi connection -if { [istarget "a29k-*-udi"] } { - gdb_exit - gdb_start -} -if ![target_info exists use_gdb_stub] { gdb_test "break" "No default breakpoint address now." "break" foreach i "b br bre brea" { gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation" } - setup_xfail "mips-idt-*" "a29k-*-udi" gdb_test "backtrace" "No stack." # ba and bac are no longer unique command prefixes. So these tests @@ -73,26 +66,14 @@ if ![target_info exists use_gdb_stub] { # GDB needs to be fixed to map unique alias here for ba bac. # foreach i "bt ba bac" { - setup_xfail "mips-idt-*" "a29k-*-udi" gdb_test $i "No stack." "backtrace \"$i\" abbreviation" } } else { warning "Skipping backtrace and break tests because of GDB stub." } -# This works on the MIPS IDT board, but confuses future tests. -if ![istarget "mips-idt-*"] then { - setup_xfail "a29k-*-udi" - gdb_test "continue" "The program is not being run." "continue" - setup_xfail "a29k-*-udi" - gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" -} - -# FIXME: continue kills the udi connection -if [istarget "a29k-*-udi"] then { - gdb_exit - gdb_start -} +gdb_test "continue" "The program is not being run." "continue" +gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" #test call gdb_test "call" "The history is empty..*" "call" @@ -102,50 +83,40 @@ gdb_test "call" "The history is empty..*" "call" gdb_test "catch" "Catch requires an event name..*" "catch" #test cd -gdb_test "cd" "Argument required .new working directory.*" "cd" +gdb_test "cd" "Working directory \[^\r\n\]*\(\r\n \\(canonically \[^\r\n\]*\\)\)?\\." #test clear gdb_test "clear" "No source file specified..*" "clear" #test commands -gdb_test "commands" "No breakpoint number 0..*" "commands" +gdb_test "commands" "Argument required .one or more breakpoint numbers...*" "commands" #test condition gdb_test "condition" "Argument required .breakpoint number.*" "condition" #test core-file -gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file" +gdb_test "core-file" "No core file now." "core-file" #test delete "d" abbreviation -gdb_test "d" "" "delete \"d\" abbreviation" +gdb_test_no_output "d" "delete \"d\" abbreviation" #test delete -gdb_test "delete" "" "delete" +gdb_test_no_output "delete" "delete" #test define gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define" #test delete breakpoints -gdb_test "delete breakpoints" "" "delete breakpoints" +gdb_test_no_output "delete breakpoints" "delete breakpoints" #test delete display # FIXME -- need to dump full output to detailed log -send_gdb "delete display\n" -gdb_expect { - -re "Delete all auto-display expressions.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "$gdb_prompt $" { pass "delete display prompt" } - timeout { fail "(timeout) delete display prompt" } - } - } - timeout { fail "(timeout) delete display prompt" } -} +gdb_test "delete display" \ + "" \ + "delete display prompt" \ + "Delete all auto-display expressions.*y or n. $" \ + "y" + #test detach -gdb_test "detach" "" "detach" +gdb_test "detach" ".*" "detach" -# FIXME: continue kills the udi connection -if [istarget "a29k-*-udi"] then { - gdb_exit - gdb_start -} if [istarget "h8300-*-hms"] then { gdb_exit gdb_start @@ -154,32 +125,26 @@ if [istarget "h8300-*-hms"] then { #test directory # FIXME -- need to dump full output to detailed log -send_gdb "directory\n" -gdb_expect { - -re "Reinitialize source path to empty.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\ - { pass "directory prompt" } - timeout { fail "(timeout) directory prompt" } - } - } -} +gdb_test "directory" \ + "Source directories searched: .cdir\[:;\].cwd.*" \ + "directory prompt" \ + "Reinitialize source path to empty.*y or n. $" \ + "y" #test disable "dis" abbreviation -gdb_test "dis" "" "disable \"dis\" abbreviation" +gdb_test_no_output "dis" "disable \"dis\" abbreviation" #test disable "disa" abbreviation -gdb_test "disa" "" "disable \"disa\" abbreviation" +gdb_test_no_output "disa" "disable \"disa\" abbreviation" #test disable -gdb_test "disable" "" "disable" +gdb_test_no_output "disable" "disable" #test disable breakpoints -gdb_test "disable breakpoints" "" "disable breakpoints" +gdb_test_no_output "disable breakpoints" "disable breakpoints" #test disable display -gdb_test "disable display" "" "disable display" +gdb_test_no_output "disable display" "disable display" #test disassemble gdb_test "disassemble" "No frame selected." "disassemble" #test display -gdb_test "display" "" "display" +gdb_test_no_output "display" "display" #test do gdb_test "do" "No stack." "do" #test document @@ -188,22 +153,38 @@ gdb_test "document" "Argument required .name of command to define.*" "document" gdb_test "down" "No stack.*" "down" #test down-silently gdb_test "down-silently" "No stack." "down-silently" +# test dump +gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*" +gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*" +gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*" +gdb_test "dump memory" "Missing filename\." +gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*" +gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*" +gdb_test "dump value" "Missing filename\." +gdb_test "dump binary memory" "Missing filename\." +gdb_test "dump binary value" "Missing filename\." +gdb_test "dump ihex memory" "Missing filename\." +gdb_test "dump ihex value" "Missing filename\." +gdb_test "dump srec memory" "Missing filename\." +gdb_test "dump srec value" "Missing filename\." +gdb_test "dump tekhex memory" "Missing filename\." +gdb_test "dump tekhex value" "Missing filename\." #test echo -gdb_test "echo" "" "echo" +gdb_test_no_output "echo" "echo" #test enable breakpoints delete gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete" #test enable breakpoints once gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once" #test enable breakpoints -gdb_test "enable breakpoints" "" "enable breakpoints" +gdb_test_no_output "enable breakpoints" "enable breakpoints" #test enable delete gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete" #test enable display -gdb_test "enable display" "" "enable display" +gdb_test_no_output "enable display" "enable display" #test enable once gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once" #test enable -gdb_test "enable" "" "enable" +gdb_test_no_output "enable" "enable" #test exec-file send_gdb "exec-file\n" gdb_expect { @@ -223,13 +204,10 @@ gdb_expect { } #test frame "f" abbreviation -setup_xfail "a29k-*-udi" gdb_test "f" "No stack." "frame \"f\" abbreviation" #test frame -setup_xfail "a29k-*-udi" gdb_test "frame" "No stack." "frame" #test fg -setup_xfail "a29k-*-udi" gdb_test "fg" "The program is not being run." "fg" # FIXME: fg kills the udi connection #test file @@ -250,28 +228,46 @@ gdb_expect { } #test finish -setup_xfail "a29k-*-udi" -gdb_test "finish" "The program is not running." "finish" +gdb_test "finish" "The program is not being run." "finish" #test forward-search # The message here comes from the regexp library, not gdb, and so can # vary on different systems. gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search" +#test gcore + +gdb_test_multiple "gcore" "gcore" { + -re "You can\'t do that without a process to debug.*$gdb_prompt $" { + pass "gcore" + } + -re "Undefined command: .*$gdb_prompt $" { + pass "gcore" + } +} + +gdb_test_multiple "generate-core-file" "generate-core-file" { + -re "You can\'t do that without a process to debug.*$gdb_prompt $" { + pass "generate-core-file" + } + -re "Undefined command: .*$gdb_prompt $" { + pass "generate-core-file" + } +} + #test help "h" abbreviation -gdb_test "h" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" +gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" #test help -gdb_test "help" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help" +gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help" #test handle gdb_test "handle" "Argument required .signal to handle.*" "handle" #test info "i" abbreviation -gdb_test "i" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" +gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" #test info -gdb_test "info" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info" +gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info" #test ignore gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore" #test info address gdb_test "info address" "Argument required." "info address" #test info all-registers -setup_xfail "a29k-*-udi" gdb_test "info all-registers" "The program has no registers now." "info all-registers" #test info args gdb_test "info args" "No frame selected." "info args" @@ -279,8 +275,6 @@ gdb_test "info args" "No frame selected." "info args" gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command" #test info breakpoints gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints" -#test info catch -gdb_test "info catch" "You can't do that without a process to debug." "info catch" #test info copying # FIXME -- doesn't work worth a shit #send_gdb "info copying" @@ -296,58 +290,77 @@ gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviatio #test info frame gdb_test "info frame" "No stack.|No selected frame." "info frame" #test info files -gdb_test "info files" "" "info files" +gdb_test_no_output "info files" "info files" #test info float -if [istarget "arm-*-*"] then { - gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" -} elseif [istarget "thumb-*-*"] then { - gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" -} elseif [istarget "strongarm-*-*"] then { - gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" -} else { - gdb_test "info float" "No floating point info available for this processor." "info float" -} +gdb_test "info float" "The program has no registers now." "info float" #test info functions gdb_test "info functions" "All defined functions:" "info functions" #test info locals gdb_test "info locals" "No frame selected." "info locals" #test info program -setup_xfail "a29k-*-udi" gdb_test "info program" "The program being debugged is not being run." "info program" #test info registers -setup_xfail "a29k-*-udi" gdb_test "info registers" "The program has no registers now." "info registers" #test info stack "s" abbreviation -setup_xfail "a29k-*-udi" gdb_test "info s" "No stack." "info stack \"s\" abbreviation" #test info stack -setup_xfail "a29k-*-udi" gdb_test "info stack" "No stack." "info stack" #test info set -# FIXME -- needs to match the entire output -gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename: The filename in which to record the command history is .*\[\r\n\]+listsize: Number of source lines gdb will list by default is 10.*" "info set" +# Test improved to check three parts: +# 1) confirm +# 2) prompt +# 3) write +# And only succeed if all three are matched. +# This should fix an old problem on native solaris 2.8, +# where this test fails due to this line: +# prompt: Gdb's prompt is "(gdb) ".^M +set set_confirm_seen 0 +set set_prompt_seen 0 +gdb_test_multiple "info set" "info set" { + -re "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10" { + verbose "Confirm dislayed" + set set_confirm_seen 1 + exp_continue + } + -re "Gdb's prompt is \"$gdb_prompt \"" { + verbose "GDB prompt displayed" + set set_prompt_seen 1 + exp_continue + } + -re "Writing into executable.*$gdb_prompt $" { + verbose "write displayed" + if { $set_prompt_seen && $set_confirm_seen } { + pass "info set" + } else { + verbose "prompt $set_prompt_seen confirm $set_confirm_seen" + fail "info set (incomplete output)" + } + } +} gdb_test "info symbol" "Argument required .address.." #test info source gdb_test "info source" "No current source file..*" "info source" #test info sources gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources" #test info target -gdb_test "info target" "" "info target" +gdb_test_no_output "info target" "info target" #test info terminal gdb_test "info terminal" "No saved terminal information." "info terminal" +# test info threads +gdb_test "info threads" "No threads." "info threads" #test info types gdb_test "info types" "All defined types:" "info types" #test info variables gdb_test "info variables" "All defined variables:" "info variables" +#test info vector +gdb_test "info vector" "The program has no registers now." "info vector" #test info warranty -setup_xfail "hppa*-hp-hpux*" -gdb_test "info warranty" "NO WARRANTY.*\[\r\n\]+ *11. *BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY.*\[\r\n\]+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN.*\[\r\n\]+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES.*\[\r\n\]+PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED.*\[\r\n\]+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF.*\[\r\n\]+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS.*\[\r\n\]+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE.*\[\r\n\]+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,.*\[\r\n\]+REPAIR OR CORRECTION..*\[\r\n\]+ *12. *IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING.*\[\r\n\]+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR.*\[\r\n\]+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,.*\[\r\n\]+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING.*\[\r\n\]+OUT OF THE USE OR INABILITY TO USE THE PROGRAM .INCLUDING BUT NOT LIMITED.*\[\r\n\]+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY.*\[\r\n\]+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER.*\[\r\n\]+PROGRAMS., EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE.*\[\r\n\]+POSSIBILITY OF SUCH DAMAGES.*" "info warranty" +gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty" #test info watchpoints -gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints" +gdb_test "info watchpoints" "No watchpoints." "info watchpoints" #test inspect gdb_test "inspect" "The history is empty." "inspect" #test jump -setup_xfail "a29k-*-udi" gdb_test "jump" "The program is not being run." "jump" #test kill gdb_test "kill" "The program is not being run." "kill" @@ -361,16 +374,12 @@ gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list" # to deduce the filename from the exec file. gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load" #test next "n" abbreviation -setup_xfail "a29k-*-udi" gdb_test "n" "The program is not being run." "next \"n\" abbreviation" #test next -setup_xfail "a29k-*-udi" gdb_test "next" "The program is not being run." "next" #test nexti "ni" abbreviation -setup_xfail "a29k-*-udi" gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation" #test nexti -setup_xfail "a29k-*-udi" gdb_test "nexti" "The program is not being run." "nexti" #test output gdb_test "output" "Argument required .expression to compute.*" "output" @@ -379,13 +388,13 @@ gdb_test "output" "Argument required .expression to compute.*" "output" gdb_test "overlay" "\"overlay\" must be followed by the name of .*" #test a non-existant overlay subcommand gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." -gdb_test "overlay manual" "" "overlay manual #1" -gdb_test "overlay auto" "" -gdb_test "overlay off" "" +gdb_test_no_output "overlay manual" "overlay manual #1" +gdb_test_no_output "overlay auto" +gdb_test_no_output "overlay off" gdb_test "overlay list" "No sections are mapped." gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" -gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #2" -gdb_test "overlay manual" "" "overlay manual #2" +gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" +gdb_test_no_output "overlay manual" "overlay manual #2" gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" @@ -401,82 +410,81 @@ gdb_test "ptype" "The history is empty." "ptype" gdb_test "pwd" "Working directory .*" "pwd" #test run "r" abbreviation -if [istarget "*-*-vxworks*"] then { - gdb_test "set args" "" "" +if $use_gdb_stub { + # Only extended-remote supports "run". +} elseif [istarget "*-*-vxworks*"] then { + gdb_test "set args" ".*" "" gdb_test "r" "Starting program: .* You must specify a function name to run, and arguments if any"\ "run \"r\" abbreviation" - gdb_test "set args main" "" "" + gdb_test "set args main" ".*" "" } else { - send_gdb "r\n" - gdb_expect { - -re "Starting program: .* -You can't do that when your target is `None'.*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re "Starting program: .* -No executable file specified.* -Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re "Starting program: .* -No image loaded into target.*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re "Starting program: .* -No program loaded.*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" } - timeout { fail "(timeout) run \"r\" abbreviation" } - } + gdb_test_multiple "r" "run \"r\" abbreviation" { + -re "Starting program: .*You can't do that when your target is `None'.*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Starting program: .*No program loaded.*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + -re "Starting program: .*Running the default executable on the remote target failed; try \"set remote exec-file\"?.*$gdb_prompt $"\ + { pass "run \"r\" abbreviation" } + } } #test run -if [istarget "*-*-vxworks*"] then { - gdb_test "set args" "" "" +if $use_gdb_stub { + # Only extended-remote supports "run". +} elseif [istarget "*-*-vxworks*"] then { + gdb_test "set args" ".*" "" gdb_test "run" "Starting program: .* You must specify a function name to run, and arguments if any" - gdb_test "set args main" "" "" + gdb_test "set args main" ".*" "" } else { - send_gdb "run\n" - gdb_expect { - -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" } - -re "Starting program: .* -No executable file specified.* -Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ - { pass "run" } - -re "Starting program: .* -No image loaded into target.*$gdb_prompt $"\ - { pass "run" } - -re "Starting program: .* -No program loaded.*$gdb_prompt $"\ - { pass "run \"r\" abbreviation" } - -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ - { pass "run" } - -re ".*$gdb_prompt $" { fail "run" } - timeout { fail "(timeout) run" } - } + gdb_test_multiple "run" "run" { + -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $"\ + { pass "run" } + -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ + { pass "run" } + -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ + { pass "run" } + -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ + { pass "run" } + -re "Starting program: .*No program loaded.*$gdb_prompt $"\ + { pass "run" } + -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ + { pass "run" } + -re "Starting program: .*Running the default executable on the remote target failed; try \"set remote exec-file\"?.*$gdb_prompt $"\ + { pass "run" } + } } #test rbreak -gdb_test "rbreak" "" "rbreak" +gdb_test "rbreak" "rbreak" + +# test restore +gdb_test "restore" "You can't do that without a process to debug\." #test return -# The middle case accommodates the a29k, where doing the "ni" above causes -# an initial stack to be created. +# The middle case accomodated the obsolete a29k, where doing the "ni" +# above causes an initial stack to be created. gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y" #test reverse-search gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search" #test step "s" abbreviation -setup_xfail "a29k-*-udi" gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1" #test step -setup_xfail "a29k-*-udi" gdb_test "step" "The program is not being run." "step #1" #test search gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search" @@ -485,21 +493,22 @@ gdb_test "section" "Must specify section name and its virtual address.*" "sectio #test set annotate gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate" #test set args -gdb_test "set args" "" "set args" -#test set check "c" abbreviation -gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation" -#test set check "ch" abbreviation -gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation" -#test set check -gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check" +gdb_test_no_output "set args" "set args" + +# Test set check abbreviations +foreach x {"c" "ch" "check"} { + gdb_test "set $x" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set strict type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." \ + "set check \"$x\" abbreviation" +} + #test set check range -gdb_test "set check range" "" "set check range" +gdb_test "set check range" ".*" "set check range" #test set check type -gdb_test "set check type" "" "set check type" +gdb_test "set check type" ".*" "set check type" #test set complaints gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints" #test set confirm -gdb_test "set confirm" "" "set confirm" +gdb_test_no_output "set confirm" "set confirm" # Don't test set editing. What if we're talking to a gdb that # won't do editing correctly while we're talking to it? # gdb_test "set editing" "" "set editing" @@ -509,59 +518,60 @@ gdb_test "set environment" "Argument required .environment variable and value.*" #test set height gdb_test "set height" "Argument required .integer to set it to.*" "set height" #test set history expansion -gdb_test "set history expansion" "" "set history expansion" +gdb_test_no_output "set history expansion" "set history expansion" #test set history filename gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" +# Make sure the history ends up in the right place. +gdb_test_no_output "set history filename [standard_output_file .gdb_history]" \ + "set the history filename" #test set history save -gdb_test "set history save" "" "set history save" +gdb_test_no_output "set history save" "set history save" #test set history size gdb_test "set history size" "Argument required .integer to set it to.*" "set history size" #test set history -gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set history" +gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history" #test set language -gdb_test "set language" "The currently understood settings are:.*\[\r\n\]+local or auto *Automatic setting based on source file.*\[\r\n\]+c *Use the C language.*\[\r\n\]+c\[+\]+ *Use the C\[+\]+ language.*\[\r\n\]+modula-2 *Use the Modula-2 language.*" "set language" +gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, d, fortran, objective-c, go, java, modula-2, opencl, pascal." "set language" #test set listsize gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize" #test set print "p" abbreviation -gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" +gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" #test set print "pr" abbreviation -gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" +gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" #test set print -gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print" +gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print" #test set print address -gdb_test "set print address" "" "set print address" +gdb_test_no_output "set print address" "set print address" #test set print array -gdb_test "set print array" "" "set print array" +gdb_test_no_output "set print array" "set print array" #test set print asm-demangle -gdb_test "set print asm-demangle" "" "set print asm-demangle" +gdb_test_no_output "set print asm-demangle" "set print asm-demangle" #test set print demangle -gdb_test "set print demangle" "" "set print demangle" +gdb_test_no_output "set print demangle" "set print demangle" #test set print elements gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements" #test set print object -gdb_test "set print object" "" "set print object" +gdb_test_no_output "set print object" "set print object" #test set print pretty -gdb_test "set print pretty" "" "set print pretty" +gdb_test_no_output "set print pretty" "set print pretty" #test set print sevenbit-strings -gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings" +gdb_test_no_output "set print sevenbit-strings" "set print sevenbit-strings" #test set print union -gdb_test "set print union" "" "set print union" +gdb_test_no_output "set print union" "set print union" #test set print vtbl -gdb_test "set print vtbl" "" "set print vtbl" +gdb_test_no_output "set print vtbl" "set print vtbl" # FIXME -- need a test for "set prompt" #test set radix gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix" -#test set symbol-reloading -gdb_test "set symbol-reloading" "" "set symbol-reloading" #test set variable gdb_test "set variable" "Argument required .expression to compute.*" "set variable" #test set verbose -gdb_test "set verbose" "" "set verbose" +gdb_test_no_output "set verbose" "set verbose" #test set width gdb_test "set width" "Argument required .integer to set it to.*" "set width" #test set write # This is only supported on targets which use exec.o. -gdb_test "set write" "" "set write" +gdb_test_no_output "set write" "set write" #test set gdb_test "set" "Argument required .expression to compute.*" "set" #test shell echo Hi dad! @@ -570,26 +580,69 @@ gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!" gdb_test "show annotate" "Annotation_level is 0." "show annotate" #test show args gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args" -#test show check "c" abbreviation -gdb_test "show c" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation" -#test show check "ch" abbreviation -gdb_test "show ch" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation" -#test show check -gdb_test "show check" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check" + +# test show check abbreviations +foreach x {"c" "ch" "check"} { + gdb_test "show $x" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Strict type checking is on\..*" \ + "show check \"$x\" abbreviation" +} + #test show check range gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range" #test show check type -gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type" +gdb_test "show check type" "Strict type checking is on\." "show check type" #test show commands -gdb_test "show commands" "" "show commands" +gdb_test "show commands" ".*" "show commands" #test show complaints gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints" #test show confirm gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm" + #test show convenience -gdb_test "show convenience" "No debugger convenience variables now defined..*\[\r\n\]+Convenience variables have names starting with \".\";.*\[\r\n\]+use \"set\" as in \"set .foo = 5\" to define them." "show convenience" +# This is trickier as there are multiple internal convenience vars and +# functions and we can't assume any particular order. +# And we have to handle the extra convenience funs provided by Python. +set show_conv_list \ + { \ + {$_sdata = void} \ + {$_siginfo = void} \ + {$_thread = 0} \ + {$_exception = } \ + {$_probe_argc = } \ + {$_probe_arg0 = } \ + {$_probe_arg1 = } \ + {$_probe_arg2 = } \ + {$_probe_arg3 = } \ + {$_probe_arg4 = } \ + {$_probe_arg5 = } \ + {$_probe_arg6 = } \ + {$_probe_arg7 = } \ + {$_probe_arg8 = } \ + {$_probe_arg9 = } \ + {$_probe_arg10 = } \ + {$_probe_arg11 = } \ + {$_isvoid = } \ + } +if ![skip_python_tests] { + append show_conv_list \ + { + {$_memeq = } \ + {$_regex = } \ + {$_streq = } \ + {$_strlen = } \ + {$_caller_is = } \ + {$_caller_matches = } \ + {$_any_caller_is = } \ + {$_any_caller_matches = } \ + } +} +gdb_test_list_exact "show convenience" "show convenience" \ + "\[^\r\n\]+\[\r\n\]+" \ + "\[^\r\n\]+" \ + $show_conv_list + #test show directories -gdb_test "show directories" "Source directories searched: .cdir:.cwd" "show directories" +gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories" #test show editing gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing" #test show height @@ -603,7 +656,7 @@ gdb_test "show history save" "Saving of the history record on exit is on." "show #test show history size gdb_test "show history size" "The size of the command history is.*" "show history size" #test show history -gdb_test "show history" "expansion: *History expansion on command input is o.*\[\r\n\]+filename: *The filename in which to record the command history is.*.gdb_history.*\[\r\n\]+save: *Saving of the history record on exit is o.*\[\r\n\]+size: * The size of the command history is.*" "show history" +gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history" #test show language gdb_test "show language" "The current source language is \"auto; currently c\"." "show language" #test show listsize @@ -613,23 +666,23 @@ gdb_test "show p" ".*" "show p" #test show print "pr" abbreviation gdb_test "show pr" ".*" "show pr" #test show print -gdb_test "show print" "" "show print" +gdb_test "show print" ".*" "show print" #test show paths gdb_test "show paths" "Executable and object file path:.*" "show paths" #test show print address gdb_test "show print address" "Printing of addresses is on." "show print address" #test show print array -gdb_test "show print array" "Prettyprinting of arrays is on." "show print array" +gdb_test "show print array" "Pretty formatting of arrays is on." "show print array" #test show print asm-demangle -gdb_test "show print asm-demangle" "Demangling of C\[+\]+ names in disassembly listings is on." "show print asm-demangle" +gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle" #test show print demangle -gdb_test "show print demangle" "Demangling of encoded C\[+\]+ names when displaying symbols is on." "show print demangle" +gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle" #test show print elements gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements" #test show print object gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object" #test show print pretty -gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty" +gdb_test "show print pretty" "Pretty formatting of structures is on." "show print pretty" #test show print sevenbit-strings gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings" #test show print union @@ -643,49 +696,62 @@ gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt" #test show radix gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix" -#test show symbol-reloading -gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading" #test show user -gdb_test "show user" "" "show user" +gdb_test_no_output "show user" "show user" #test show values -gdb_test "show values" "" "show values" +gdb_test_no_output "show values" "show values" #test show verbose gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose" #test show version -setup_xfail "hppa*-hp-hpux*" -gdb_test "show version" "GNU gdb \[0-9\.\]*.*\[\r\n\]+Copyright \[0-9\]* Free Software Foundation, Inc.*\[\r\n\]+GDB is free software, covered by the GNU General Public License, and you are.*\[\r\n\]+welcome to change it and/or distribute copies of it under certain conditions.*\[\r\n\]+Type \"show copying\" to see the conditions.*\[\r\n\]+There is absolutely no warranty for GDB. Type \"show warranty\" for details.*\[\r\n\]+This GDB was configured as .*|GDB is free software and you are welcome to distribute copies of it.*\[\r\n\]+ under certain conditions; type \"show copying\" to see the conditions..*\[\r\n\]+There is absolutely no warranty for GDB; type \"show warranty\" for details..*\[\r\n\]+GDB.*Copyright \[0-9\]* Free Software Foundation, Inc.*" "show version" +gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later (\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version" #test show width gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width" #test show write # This is only supported on targets which use exec.o. gdb_test "show write" "Writing into executable and core files is o.*" "show write" #test show -gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename: *The filename in which to record the command history is .*\[\r\n\]+history save: *Saving of the history record on exit is on..*\[\r\n\]+history size: *The size of the command history is.*\[\r\n\]+listsize: *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements: *Limit on string chars or array elements to print is 200..*" "show" +set show_confirm_seen 0 +set show_prompt_seen 0 +gdb_test_multiple "show" "show" { + -re "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200." { + verbose "Confirm dislayed" + set show_confirm_seen 1 + exp_continue + } + -re "Gdb's prompt is \"$gdb_prompt \"" { + verbose "GDB prompt displayed" + set show_prompt_seen 1 + exp_continue + } + -re "Writing into executable.*$gdb_prompt $" { + verbose "write displayed" + if { $show_prompt_seen && $show_confirm_seen } { + pass "show" + } else { + verbose "prompt $show_prompt_seen confirm $show_confirm_seen" + fail "show (incomplete output)" + } + } +} +#history saving should stay disabled +gdb_test_no_output "set history save off" "set history save off" #test stepi "si" abbreviation -setup_xfail "a29k-*-udi" gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation" #test stepi -setup_xfail "a29k-*-udi" gdb_test "stepi" "The program is not being run." "stepi" #test signal -setup_xfail "a29k-*-udi" gdb_test "signal" "The program is not being run." "signal" #test source -gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source" +gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source" #test step "s" abbreviation -setup_xfail "a29k-*-udi" gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2" #test step -setup_xfail "a29k-*-udi" gdb_test "step" "The program is not being run." "step #2" #test symbol-file -gdb_test "symbol-file" "" "symbol-file" - -#test target child -gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child" +gdb_test "symbol-file" ".*" "symbol-file" -#test target procfs -gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs" +#test target native +gdb_test "target native" "Use the \"run\" command to start a process.*|Undefined target command: \"native\". *Try \"help target\".*" "target native" #test target core send_gdb "target core\n" @@ -725,7 +791,7 @@ gdb_expect { if ![istarget "*-*-udi*"] then { send_gdb "target remote\n" gdb_expect { - -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system .e.g. /dev/ttya.*$gdb_prompt $"\ + -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\ { pass "target remote" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" @@ -744,47 +810,39 @@ if ![istarget "*-*-udi*"] then { gdb_test "target" "Argument required .target name.*" "target" #test tbreak gdb_test "tbreak" "No default breakpoint address now." "tbreak" +#test thread +gdb_test "thread" "No thread selected" "thread" +#test thread apply +gdb_test "thread apply" "Please specify a thread ID list" "thread apply" +#test thread find +gdb_test "thread find" "Command requires an argument." "thread find" +#test thread name +gdb_test "thread name" "No thread selected" "thread name" #test tty -gdb_test "tty" "Argument required .terminal name for running target process.*" "tty" +gdb_test "tty" "Argument required .filename to set it to\..*" "tty" #test until "u" abbreviation -setup_xfail "a29k-*-udi" -gdb_test "u" "The program is not running." "until \"u\" abbreviation" +gdb_test "u" "The program is not being run." "until \"u\" abbreviation" #test until -setup_xfail "a29k-*-udi" -gdb_test "until" "The program is not running." "until" +gdb_test "until" "The program is not being run." "until" #test undisplay # FIXME -- need to dump full output to detailed log -send_gdb "undisplay\n" -gdb_expect { - -re "Delete all auto-display expressions.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "$gdb_prompt $" { pass "undisplay prompt" } - timeout { fail "(timeout) (timeout) undisplay prompt" } - } - } - timeout { fail "(timeout) (timeout) undisplay prompt" } -} + +gdb_test "undisplay" \ + "" \ + "undisplay prompt" \ + "Delete all auto-display expressions.*y or n. $" \ + "y" #test unset environment -send_gdb "unset environment\n" -gdb_expect { - -re "Delete all environment variables?.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "$gdb_prompt $" { pass "unset environmentprompt" } - timeout { - fail "(timeout) (timeout) unset environment prompt" - } - } - } - timeout { - fail "(timeout) (timeout) unset environment prompt" - } -} + +gdb_test "unset environment" \ + "" \ + "unset environment prompt" \ + "Delete all environment variables?.*y or n. $" \ + "y" #test unset -gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand..*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "unset" +gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset" #test up #test up-silently gdb_test "up-silently" "No stack." "up-silently" @@ -793,20 +851,10 @@ gdb_test "watch" "Argument required .expression to compute.*" "watch" #test whatis gdb_test "whatis" "The history is empty." "whatis" #test where -setup_xfail "a29k-*-udi" gdb_test "where" "No stack." "where" #test x -#The case in which it prints a number is for vxgdb. -send_gdb "x\n" -gdb_expect { - -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" { - pass "x" - } - -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" { - pass "x" - } - -re ".*$gdb_prompt $" { fail "x" } - timeout { fail "(timeout) x" } -} +gdb_test "x" "Argument required .starting display address.*" "x" gdb_exit + +set timeout $prev_timeout