X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=sound%2Fsoc%2Fcodecs%2Fnau8825.c;h=5c9707ac4bbff20e1240d9961ea28bcc8d5af82f;hb=ee65e18206f5b430d71c39f72fa85a8d1f2b999d;hp=683769f0f24693bae0ce89eee8938b815721a6fd;hpb=0df88121fb56d7ab902335c05292346fbe0acd06;p=deliverable%2Flinux.git diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 683769f0f246..5c9707ac4bbf 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -30,10 +31,22 @@ #include "nau8825.h" + +#define NUVOTON_CODEC_DAI "nau8825-hifi" + #define NAU_FREF_MAX 13500000 -#define NAU_FVCO_MAX 100000000 +#define NAU_FVCO_MAX 124000000 #define NAU_FVCO_MIN 90000000 +/* cross talk suppression detection */ +#define LOG10_MAGIC 646456993 +#define GAIN_AUGMENT 22500 +#define SIDETONE_BASE 207000 + + +static int nau8825_configure_sysclk(struct nau8825 *nau8825, + int clk_id, unsigned int freq); + struct nau8825_fll { int mclk_src; int ratio; @@ -156,6 +169,661 @@ static const struct reg_default nau8825_reg_defaults[] = { { NAU8825_REG_CHARGE_PUMP, 0x0 }, }; +/* register backup table when cross talk detection */ +static struct reg_default nau8825_xtalk_baktab[] = { + { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, + { NAU8825_REG_HSVOL_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0 }, + { NAU8825_REG_DACR_CTRL, 0 }, +}; + +static const unsigned short logtable[256] = { + 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, + 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, + 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, + 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, + 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, + 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, + 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, + 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, + 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, + 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, + 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, + 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, + 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, + 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, + 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, + 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, + 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, + 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, + 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, + 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, + 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, + 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, + 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, + 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, + 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, + 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, + 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, + 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, + 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, + 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, + 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, + 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 +}; + +static struct snd_soc_dai *nau8825_get_codec_dai(struct nau8825 *nau8825) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); + struct snd_soc_component *component = &codec->component; + struct snd_soc_dai *codec_dai, *_dai; + + list_for_each_entry_safe(codec_dai, _dai, &component->dai_list, list) { + if (!strncmp(codec_dai->name, NUVOTON_CODEC_DAI, + strlen(NUVOTON_CODEC_DAI))) + return codec_dai; + } + return NULL; +} + +static bool nau8825_dai_is_active(struct nau8825 *nau8825) +{ + struct snd_soc_dai *codec_dai = nau8825_get_codec_dai(nau8825); + + if (codec_dai) { + if (codec_dai->playback_active || codec_dai->capture_active) + return true; + } + return false; +} + +/** + * nau8825_sema_acquire - acquire the semaphore of nau88l25 + * @nau8825: component to register the codec private data with + * @timeout: how long in jiffies to wait before failure or zero to wait + * until release + * + * Attempts to acquire the semaphore with number of jiffies. If no more + * tasks are allowed to acquire the semaphore, calling this function will + * put the task to sleep. If the semaphore is not released within the + * specified number of jiffies, this function returns. + * Acquires the semaphore without jiffies. If no more tasks are allowed + * to acquire the semaphore, calling this function will put the task to + * sleep until the semaphore is released. + * It returns if the semaphore was acquired. + */ +static void nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) +{ + int ret; + + if (timeout) + ret = down_timeout(&nau8825->xtalk_sem, timeout); + else + ret = down_interruptible(&nau8825->xtalk_sem); + + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphone fail\n"); +} + +/** + * nau8825_sema_release - release the semaphore of nau88l25 + * @nau8825: component to register the codec private data with + * + * Release the semaphore which may be called from any context and + * even by tasks which have never called down(). + */ +static inline void nau8825_sema_release(struct nau8825 *nau8825) +{ + up(&nau8825->xtalk_sem); +} + +/** + * nau8825_sema_reset - reset the semaphore for nau88l25 + * @nau8825: component to register the codec private data with + * + * Reset the counter of the semaphore. Call this function to restart + * a new round task management. + */ +static inline void nau8825_sema_reset(struct nau8825 *nau8825) +{ + nau8825->xtalk_sem.count = 1; +} + +/** + * Ramp up the headphone volume change gradually to target level. + * + * @nau8825: component to register the codec private data with + * @vol_from: the volume to start up + * @vol_to: the target volume + * @step: the volume span to move on + * + * The headphone volume is from 0dB to minimum -54dB and -1dB per step. + * If the volume changes sharp, there is a pop noise heard in headphone. We + * provide the function to ramp up the volume up or down by delaying 10ms + * per step. + */ +static void nau8825_hpvol_ramp(struct nau8825 *nau8825, + unsigned int vol_from, unsigned int vol_to, unsigned int step) +{ + unsigned int value, volume, ramp_up, from, to; + + if (vol_from == vol_to || step == 0) { + return; + } else if (vol_from < vol_to) { + ramp_up = true; + from = vol_from; + to = vol_to; + } else { + ramp_up = false; + from = vol_to; + to = vol_from; + } + /* only handle volume from 0dB to minimum -54dB */ + if (to > NAU8825_HP_VOL_MIN) + to = NAU8825_HP_VOL_MIN; + + for (volume = from; volume < to; volume += step) { + if (ramp_up) + value = volume; + else + value = to - volume + from; + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, + (value << NAU8825_HPL_VOL_SFT) | value); + usleep_range(10000, 10500); + } + if (ramp_up) + value = to; + else + value = from; + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, + (value << NAU8825_HPL_VOL_SFT) | value); +} + +/** + * Computes log10 of a value; the result is round off to 3 decimal. This func- + * tion takes reference to dvb-math. The source code locates as the following. + * Linux/drivers/media/dvb-core/dvb_math.c + * + * return log10(value) * 1000 + */ +static u32 nau8825_intlog10_dec3(u32 value) +{ + u32 msb, logentry, significand, interpolation, log10val; + u64 log2val; + + /* first detect the msb (count begins at 0) */ + msb = fls(value) - 1; + /** + * now we use a logtable after the following method: + * + * log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24 + * where x = msb and therefore 1 <= y < 2 + * first y is determined by shifting the value left + * so that msb is bit 31 + * 0x00231f56 -> 0x8C7D5800 + * the result is y * 2^31 -> "significand" + * then the highest 9 bits are used for a table lookup + * the highest bit is discarded because it's always set + * the highest nine bits in our example are 100011000 + * so we would use the entry 0x18 + */ + significand = value << (31 - msb); + logentry = (significand >> 23) & 0xff; + /** + * last step we do is interpolation because of the + * limitations of the log table the error is that part of + * the significand which isn't used for lookup then we + * compute the ratio between the error and the next table entry + * and interpolate it between the log table entry used and the + * next one the biggest error possible is 0x7fffff + * (in our example it's 0x7D5800) + * needed value for next table entry is 0x800000 + * so the interpolation is + * (error / 0x800000) * (logtable_next - logtable_current) + * in the implementation the division is moved to the end for + * better accuracy there is also an overflow correction if + * logtable_next is 256 + */ + interpolation = ((significand & 0x7fffff) * + ((logtable[(logentry + 1) & 0xff] - + logtable[logentry]) & 0xffff)) >> 15; + + log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation); + /** + * log10(x) = log2(x) * log10(2) + */ + log10val = (log2val * LOG10_MAGIC) >> 31; + /** + * the result is round off to 3 decimal + */ + return log10val / ((1 << 24) / 1000); +} + +/** + * computes cross talk suppression sidetone gain. + * + * @sig_org: orignal signal level + * @sig_cros: cross talk signal level + * + * The orignal and cross talk signal vlues need to be characterized. + * Once these values have been characterized, this sidetone value + * can be converted to decibel with the equation below. + * sidetone = 20 * log (original signal level / crosstalk signal level) + * + * return cross talk sidetone gain + */ +static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros) +{ + u32 gain, sidetone; + + if (unlikely(sig_org == 0) || unlikely(sig_cros == 0)) { + WARN_ON(1); + return 0; + } + + sig_org = nau8825_intlog10_dec3(sig_org); + sig_cros = nau8825_intlog10_dec3(sig_cros); + if (sig_org >= sig_cros) + gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT; + else + gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT; + sidetone = SIDETONE_BASE - gain * 2; + sidetone /= 1000; + + return sidetone; +} + +static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++) + if (nau8825_xtalk_baktab[index].reg == reg) + return index; + return -EINVAL; +} + +static void nau8825_xtalk_backup(struct nau8825 *nau8825) +{ + int i; + + /* Backup some register values to backup table */ + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + &nau8825_xtalk_baktab[i].def); +} + +static void nau8825_xtalk_restore(struct nau8825 *nau8825) +{ + int i, volume; + + /* Restore register values from backup table; When the driver restores + * the headphone volumem, it needs recover to original level gradually + * with 3dB per step for less pop noise. + */ + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) { + if (nau8825_xtalk_baktab[i].reg == NAU8825_REG_HSVOL_CTRL) { + /* Ramping up the volume change to reduce pop noise */ + volume = nau8825_xtalk_baktab[i].def & + NAU8825_HPR_VOL_MASK; + nau8825_hpvol_ramp(nau8825, 0, volume, 3); + continue; + } + regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + nau8825_xtalk_baktab[i].def); + } +} + +static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) +{ + /* Enable power of DAC path */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK | + NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR | + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK); + /* Prevent startup click by letting charge pump to ramp up and + * change bump enable + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN); + /* Enable clock sync of DAC and DAC clock */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN | + NAU8825_RDAC_FS_BCLK_ENB, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN); + /* Power up output driver with 2 stage */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L); + /* HP outputs not shouted to ground */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0); + /* Enable HP boost driver */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + /* Enable class G compare path to supply 1.8V or 0.9V. */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN); +} + +static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825) +{ + /* Power up left ADC and raise 5dB than Vmid for Vref */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB); +} + +static void nau8825_xtalk_clock(struct nau8825 *nau8825) +{ + /* Recover FLL default value */ + regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0); + regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126); + regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008); + regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010); + regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0); + regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000); + /* Enable internal VCO clock for detection signal generated */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, + NAU8825_DCO_EN); + /* Given specific clock frequency of internal clock to + * generate signal. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_MCLK_SRC_MASK, 0xf); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, + NAU8825_FLL_RATIO_MASK, 0x10); +} + +static void nau8825_xtalk_prepare(struct nau8825 *nau8825) +{ + int volume, index; + + /* Backup those registers changed by cross talk detection */ + nau8825_xtalk_backup(nau8825); + /* Config IIS as master to output signal by codec */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER | + (0x2 << NAU8825_I2S_DRV_SFT) | 0x1); + /* Ramp up headphone volume to 0dB to get better performance and + * avoid pop noise in headphone. + */ + index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL); + if (index != -EINVAL) { + volume = nau8825_xtalk_baktab[index].def & + NAU8825_HPR_VOL_MASK; + nau8825_hpvol_ramp(nau8825, volume, 0, 3); + } + nau8825_xtalk_clock(nau8825); + nau8825_xtalk_prepare_dac(nau8825); + nau8825_xtalk_prepare_adc(nau8825); + /* Config channel path and digital gain */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK, + NAU8825_DACL_CH_SEL_L | 0xab); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK, + NAU8825_DACR_CH_SEL_R | 0xab); + /* Config cross talk parameters and generate the 23Hz sine wave with + * 1/16 full scale of signal level for impedance measurement. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK | + NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK, + (0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th | + NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN); + /* RMS intrruption enable */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); + /* Power up left and right DAC */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); +} + +static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) +{ + /* Disable HP boost driver */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, 0); + /* HP outputs shouted to ground */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + /* Power down left and right DAC */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + /* Enable the TESTDAC and disable L/R HP impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); + /* Power down output driver with 2 stage */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0); + /* Disable clock sync of DAC and DAC clock */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0); + /* Disable charge pump ramp up function and change bump */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0); + /* Disable power of DAC path */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0); + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); +} + +static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) +{ + /* Power down left ADC and restore voltage to Vmid */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); +} + +static void nau8825_xtalk_clean(struct nau8825 *nau8825) +{ + /* Enable internal VCO needed for interruptions */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); + nau8825_xtalk_clean_dac(nau8825); + nau8825_xtalk_clean_adc(nau8825); + /* Clear cross talk parameters and disable */ + regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0); + /* RMS intrruption disable */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); + /* Recover default value for IIS */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); + /* Restore value of specific register for cross talk */ + nau8825_xtalk_restore(nau8825); +} + +static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) +{ + /* Apply ADC volume for better cross talk performance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL, + NAU8825_ADC_DIG_VOL_MASK, vol); + /* Disables JKTIP(HPL) DAC channel for right to left measurement. + * Do it before sending signal in order to erase pop noise. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN, + NAU8825_BIAS_TESTDACL_EN); + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_HPR_R2L: + /* Enable right headphone impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPR_IMP); + break; + case NAU8825_XTALK_HPL_R2L: + /* Enable left headphone impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPL_IMP); + break; + default: + break; + } + msleep(100); + /* Impedance measurement mode enable */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_EN, NAU8825_IMM_EN); +} + +static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825) +{ + /* Impedance measurement mode disable */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0); +} + +/* The cross talk measurement function can reduce cross talk across the + * JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal + * level to determine what cross talk reduction gain is. This system works by + * sending a 23Hz -24dBV sine wave into the headset output DAC and through + * the PGA. The output of the PGA is then connected to an internal current + * sense which measures the attenuated 23Hz signal and passing the output to + * an ADC which converts the measurement to a binary code. With two separated + * measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data + * can be separated read in IMM_RMS_L for HSR and HSL after each measurement. + * Thus, the measurement function has four states to complete whole sequence. + * 1. Prepare state : Prepare the resource for detection and transfer to HPR + * IMM stat to make JKR1(HPR) impedance measure. + * 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer + * to HPL IMM state to make JKTIP(HPL) impedance measure. + * 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and + * transfer to IMM state to determine suppression sidetone gain. + * 4. IMM state : Computes cross talk suppression sidetone gain with orignal + * and cross talk signal level. Apply this gain and then restore codec + * configuration. Then transfer to Done state for ending. + */ +static void nau8825_xtalk_measure(struct nau8825 *nau8825) +{ + u32 sidetone; + + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_PREPARE: + /* In prepare state, set up clock, intrruption, DAC path, ADC + * path and cross talk detection parameters for preparation. + */ + nau8825_xtalk_prepare(nau8825); + msleep(280); + /* Trigger right headphone impedance detection */ + nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00d2); + break; + case NAU8825_XTALK_HPR_R2L: + /* In right headphone IMM state, read out right headphone + * impedance measure result, and then start up left side. + */ + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + /* Disable then re-enable IMM mode to update */ + nau8825_xtalk_imm_stop(nau8825); + /* Trigger left headphone impedance detection */ + nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00ff); + break; + case NAU8825_XTALK_HPL_R2L: + /* In left headphone IMM state, read out left headphone + * impedance measure result, and delay some time to wait + * detection sine wave output finish. Then, we can calculate + * the cross talk suppresstion side tone according to the L/R + * headphone imedance. + */ + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + nau8825_xtalk_imm_stop(nau8825); + msleep(150); + nau8825->xtalk_state = NAU8825_XTALK_IMM; + break; + case NAU8825_XTALK_IMM: + /* In impedance measure state, the orignal and cross talk + * signal level vlues are ready. The side tone gain is deter- + * mined with these signal level. After all, restore codec + * configuration. + */ + sidetone = nau8825_xtalk_sidetone( + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L], + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone); + regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, + (sidetone << 8) | sidetone); + nau8825_xtalk_clean(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + break; + default: + break; + } +} + +static void nau8825_xtalk_work(struct work_struct *work) +{ + struct nau8825 *nau8825 = container_of( + work, struct nau8825, xtalk_work); + + nau8825_xtalk_measure(nau8825); + /* To determine the cross talk side tone gain when reach + * the impedance measure state. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_IMM) + nau8825_xtalk_measure(nau8825); + + /* Delay jack report until cross talk detection process + * completed. It can avoid application to do playback + * preparation before cross talk detection is still working. + * Meanwhile, the protection of the cross talk detection + * is released. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_DONE) { + snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event, + nau8825->xtalk_event_mask); + nau8825_sema_release(nau8825); + nau8825->xtalk_protect = false; + } +} + +static void nau8825_xtalk_cancel(struct nau8825 *nau8825) +{ + /* If the xtalk_protect is true, that means the process is still + * on going. The driver forces to cancel the cross talk task and + * restores the configuration to original status. + */ + if (nau8825->xtalk_protect) { + cancel_work_sync(&nau8825->xtalk_work); + nau8825_xtalk_clean(nau8825); + } + /* Reset parameters for cross talk suppression function */ + nau8825_sema_reset(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + nau8825->xtalk_protect = false; +} + static bool nau8825_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -217,12 +885,36 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) case NAU8825_REG_SARDOUT_RAM_STATUS: case NAU8825_REG_CHARGE_PUMP_INPUT_READ: case NAU8825_REG_GENERAL_STATUS: + case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: return true; default: return false; } } +static int nau8825_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); + break; + case SND_SOC_DAPM_POST_PMD: + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + static int nau8825_pump_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -270,6 +962,54 @@ static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w, return 0; } +static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + + if (!component->regmap) + return -EINVAL; + + regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1, + ucontrol->value.bytes.data, params->max); + return 0; +} + +static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + void *data; + + if (!component->regmap) + return -EINVAL; + + data = kmemdup(ucontrol->value.bytes.data, + params->max, GFP_KERNEL | GFP_DMA); + if (!data) + return -ENOMEM; + + regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, + NAU8825_BIQ_WRT_EN, 0); + regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1, + data, params->max); + regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, + NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN); + + kfree(data); + return 0; +} + +static const char * const nau8825_biq_path[] = { + "ADC", "DAC" +}; + +static const struct soc_enum nau8825_biq_path_enum = + SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT, + ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path); + static const char * const nau8825_adc_decimation[] = { "32", "64", "128", "256" }; @@ -306,6 +1046,10 @@ static const struct snd_kcontrol_new nau8825_controls[] = { SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum), SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum), + /* programmable biquad filter */ + SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum), + SND_SOC_BYTES_EXT("BIQ Coefficients", 20, + nau8825_biq_coeff_get, nau8825_biq_coeff_put), }; /* DAC Mux 0x33[9] and 0x34[9] */ @@ -338,7 +1082,9 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0, NULL, 0), - SND_SOC_DAPM_ADC("ADC", NULL, NAU8825_REG_ENA_CTRL, 8, 0), + SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0, + nau8825_adc_event, SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, 0), @@ -592,9 +1338,6 @@ int nau8825_enable_jack_detect(struct snd_soc_codec *codec, NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); - regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, - NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0); - return 0; } EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect); @@ -602,24 +1345,21 @@ EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect); static bool nau8825_is_jack_inserted(struct regmap *regmap) { - int status; + bool active_high, is_high; + int status, jkdet; + regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet); + active_high = jkdet & NAU8825_JACK_POLARITY; regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status); - return !(status & NAU8825_GPIO2JD1); + is_high = status & NAU8825_GPIO2JD1; + /* return jack connection status according to jack insertion logic + * active high or active low. + */ + return active_high == is_high; } static void nau8825_restart_jack_detection(struct regmap *regmap) { - /* Chip needs one FSCLK cycle in order to generate interrupts, - * as we cannot guarantee one will be provided by the system. Turning - * master mode on then off enables us to generate that FSCLK cycle - * with a minimum of contention on the clock bus. - */ - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); - /* this will restart the entire jack detection process including MIC/GND * switching and create interrupts. We have to go from 0 to 1 and back * to 0 to restart. @@ -630,11 +1370,30 @@ static void nau8825_restart_jack_detection(struct regmap *regmap) NAU8825_JACK_DET_RESTART, 0); } +static void nau8825_int_status_clear_all(struct regmap *regmap) +{ + int active_irq, clear_irq, i; + + /* Reset the intrruption status from rightmost bit if the corres- + * ponding irq event occurs. + */ + regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); + for (i = 0; i < NAU8825_REG_DATA_LEN; i++) { + clear_irq = (0x1 << i); + if (active_irq & clear_irq) + regmap_write(regmap, + NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); + } +} + static void nau8825_eject_jack(struct nau8825 *nau8825) { struct snd_soc_dapm_context *dapm = nau8825->dapm; struct regmap *regmap = nau8825->regmap; + /* Force to cancel the cross talk detection process */ + nau8825_xtalk_cancel(nau8825); + snd_soc_dapm_disable_pin(dapm, "SAR"); snd_soc_dapm_disable_pin(dapm, "MICBIAS"); /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ @@ -644,6 +1403,69 @@ static void nau8825_eject_jack(struct nau8825 *nau8825) regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf); snd_soc_dapm_sync(dapm); + + /* Clear all interruption status */ + nau8825_int_status_clear_all(regmap); + + /* Enable the insertion interruption, disable the ejection inter- + * ruption, and then bypass de-bounce circuit. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS, + NAU8825_IRQ_EJECT_DIS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | + NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | + NAU8825_IRQ_HEADSET_COMPLETE_EN); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); + + /* Disable ADC needed for interruptions at audo mode */ + regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, 0); + + /* Close clock for jack type detection at manual mode */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); +} + +/* Enable audo mode interruptions with internal clock. */ +static void nau8825_setup_auto_irq(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* Enable headset jack type detection complete interruption and + * jack ejection interruption. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0); + + /* Enable internal VCO needed for interruptions */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); + + /* Enable ADC needed for interruptions */ + regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); + + /* Chip needs one FSCLK cycle in order to generate interruptions, + * as we cannot guarantee one will be provided by the system. Turning + * master mode on then off enables us to generate that FSCLK cycle + * with a minimum of contention on the clock bus. + */ + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + + /* Not bypass de-bounce circuit */ + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, 0); + + /* Unmask all interruptions */ + regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); + + /* Restart the jack detection process at auto mode */ + nau8825_restart_jack_detection(regmap); } static int nau8825_button_decode(int value) @@ -676,6 +1498,11 @@ static int nau8825_jack_insert(struct nau8825 *nau8825) regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); mic_detected = (jack_status_reg >> 10) & 3; + /* The JKSLV and JKR2 all detected in high impedance headset */ + if (mic_detected == 0x3) + nau8825->high_imped = true; + else + nau8825->high_imped = false; switch (mic_detected) { case 0: @@ -773,6 +1600,33 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { if (nau8825_is_jack_inserted(regmap)) { event |= nau8825_jack_insert(nau8825); + if (!nau8825->high_imped) { + /* Apply the cross talk suppression in the + * headset without high impedance. + */ + if (!nau8825->xtalk_protect) { + /* Raise protection for cross talk de- + * tection if no protection before. + * The driver has to cancel the pro- + * cess and restore changes if process + * is ongoing when ejection. + */ + nau8825->xtalk_protect = true; + nau8825_sema_acquire(nau8825, 0); + } + /* Startup cross talk detection process */ + nau8825->xtalk_state = NAU8825_XTALK_PREPARE; + schedule_work(&nau8825->xtalk_work); + } else { + /* The cross talk suppression shouldn't apply + * in the headset with high impedance. Thus, + * relieve the protection raised before. + */ + if (nau8825->xtalk_protect) { + nau8825_sema_release(nau8825); + nau8825->xtalk_protect = false; + } + } } else { dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); nau8825_eject_jack(nau8825); @@ -780,6 +1634,37 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) event_mask |= SND_JACK_HEADSET; clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; + /* Record the interruption report event for driver to report + * the event later. The jack report will delay until cross + * talk detection process is done. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) { + nau8825->xtalk_event = event; + nau8825->xtalk_event_mask = event_mask; + } + } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { + schedule_work(&nau8825->xtalk_work); + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; + } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == + NAU8825_JACK_INSERTION_DETECTED) { + /* One more step to check GPIO status directly. Thus, the + * driver can confirm the real insertion interruption because + * the intrruption at manual mode has bypassed debounce + * circuit which can get rid of unstable status. + */ + if (nau8825_is_jack_inserted(regmap)) { + /* Turn off insertion interruption at manual mode */ + regmap_update_bits(regmap, + NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_INSERT_DIS, + NAU8825_IRQ_INSERT_DIS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN); + /* Enable interruption for jack type detection at audo + * mode which can detect microphone and jack type. + */ + nau8825_setup_auto_irq(nau8825); + } } if (!clear_irq) @@ -787,7 +1672,12 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) /* clears the rightmost interruption */ regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); - if (event_mask) + /* Delay jack report until cross talk detection is done. It can avoid + * application to do playback preparation when cross talk detection + * process is still working. Otherwise, the resource like clock and + * power will be issued by them at the same time and conflict happens. + */ + if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE) snd_soc_jack_report(nau8825->jack, event, event_mask); return IRQ_HANDLED; @@ -921,11 +1811,16 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK, (0x2 << NAU8825_RDAC_CLK_DELAY_SFT) | (0x3 << NAU8825_RDAC_VREF_SFT)); + /* Config L/R channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R); } static const struct regmap_config nau8825_regmap_config = { - .val_bits = 16, - .reg_bits = 16, + .val_bits = NAU8825_REG_DATA_LEN, + .reg_bits = NAU8825_REG_ADDR_LEN, .max_register = NAU8825_REG_MAX, .readable_reg = nau8825_readable_reg, @@ -944,18 +1839,15 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) nau8825->dapm = dapm; - /* The interrupt clock is gated by x1[10:8], - * one of them needs to be enabled all the time for - * interrupts to happen. - */ - snd_soc_dapm_force_enable_pin(dapm, "DDACR"); - snd_soc_dapm_sync(dapm); + return 0; +} - /* Unmask interruptions. Handler uses dapm object so we can enable - * interruptions only after dapm is fully initialized. - */ - regmap_write(nau8825->regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); - nau8825_restart_jack_detection(nau8825->regmap); +static int nau8825_codec_remove(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + /* Cancel and reset cross tak suppresstion detection funciton */ + nau8825_xtalk_cancel(nau8825); return 0; } @@ -973,8 +1865,8 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, struct nau8825_fll *fll_param) { - u64 fvco; - unsigned int fref, i; + u64 fvco, fvco_max; + unsigned int fref, i, fvco_sel; /* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing * freq_in by 1, 2, 4, or 8 using FLL pre-scalar. @@ -999,18 +1891,23 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, fll_param->ratio = fll_ratio[i].val; /* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs. - * FDCO must be within the 90MHz - 100MHz or the FFL cannot be + * FDCO must be within the 90MHz - 124MHz or the FFL cannot be * guaranteed across the full range of operation. * FDCO = freq_out * 2 * mclk_src_scaling */ + fvco_max = 0; + fvco_sel = ARRAY_SIZE(mclk_src_scaling); for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { fvco = 256 * fs * 2 * mclk_src_scaling[i].param; - if (NAU_FVCO_MIN < fvco && fvco < NAU_FVCO_MAX) - break; + if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && + fvco_max < fvco) { + fvco_max = fvco; + fvco_sel = i; + } } - if (i == ARRAY_SIZE(mclk_src_scaling)) + if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel) return -EINVAL; - fll_param->mclk_src = mclk_src_scaling[i].val; + fll_param->mclk_src = mclk_src_scaling[fvco_sel].val; /* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional * input based on FDCO, FREF and FLL ratio. @@ -1025,7 +1922,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, struct nau8825_fll *fll_param) { regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, - NAU8825_CLK_MCLK_SRC_MASK, fll_param->mclk_src); + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_MCLK | fll_param->mclk_src); regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, NAU8825_FLL_RATIO_MASK, fll_param->ratio); /* FLL 16-bit fractional input */ @@ -1038,10 +1936,25 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div); /* select divided VCO input */ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, - NAU8825_FLL_FILTER_SW_MASK, 0x0000); - /* FLL sigma delta modulator enable */ - regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, - NAU8825_SDM_EN_MASK, NAU8825_SDM_EN); + NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); + /* Disable free-running mode */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); + if (fll_param->fll_frac) { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_FILTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN, NAU8825_SDM_EN); + } else { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU); + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_SDM_EN, 0); + } } /* freq_out must be 256*Fs in order to achieve the best performance */ @@ -1069,6 +1982,45 @@ static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source, return 0; } +static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq) +{ + int ret = 0; + + nau8825->mclk = devm_clk_get(nau8825->dev, "mclk"); + if (IS_ERR(nau8825->mclk)) { + dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally"); + return 0; + } + + if (!nau8825->mclk_freq) { + ret = clk_prepare_enable(nau8825->mclk); + if (ret) { + dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); + return ret; + } + } + + if (nau8825->mclk_freq != freq) { + freq = clk_round_rate(nau8825->mclk, freq); + ret = clk_set_rate(nau8825->mclk, freq); + if (ret) { + dev_err(nau8825->dev, "Unable to set mclk rate\n"); + return ret; + } + nau8825->mclk_freq = freq; + } + + return 0; +} + +static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap) +{ + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, 0); +} + static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, unsigned int freq) { @@ -1076,40 +2028,106 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, int ret; switch (clk_id) { + case NAU8825_CLK_DIS: + /* Clock provided externally and disable internal VCO clock */ + nau8825_configure_mclk_as_sysclk(regmap); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; case NAU8825_CLK_MCLK: + /* Acquire the semaphone to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 2 * HZ); + nau8825_configure_mclk_as_sysclk(regmap); + /* MCLK not changed by clock tree */ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, - NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); - regmap_update_bits(regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); + NAU8825_CLK_MCLK_SRC_MASK, 0); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); - /* We selected MCLK source but the clock itself managed externally */ - if (!nau8825->mclk) - break; + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; - if (!nau8825->mclk_freq) { - ret = clk_prepare_enable(nau8825->mclk); - if (ret) { - dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); - return ret; - } + break; + case NAU8825_CLK_INTERNAL: + if (nau8825_is_jack_inserted(nau8825->regmap)) { + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, NAU8825_DCO_EN); + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + /* Decrease the VCO frequency for power saving */ + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_MCLK_SRC_MASK, 0xf); + regmap_update_bits(regmap, NAU8825_REG_FLL1, + NAU8825_FLL_RATIO_MASK, 0x10); + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN, NAU8825_SDM_EN); + } else { + /* The clock turns off intentionally for power saving + * when no headset connected. + */ + nau8825_configure_mclk_as_sysclk(regmap); + dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n"); + } + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; } - if (nau8825->mclk_freq != freq) { - nau8825->mclk_freq = freq; + break; + case NAU8825_CLK_FLL_MCLK: + /* Acquire the semaphone to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 2 * HZ); + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_MCLK); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); - freq = clk_round_rate(nau8825->mclk, freq); - ret = clk_set_rate(nau8825->mclk, freq); - if (ret) { - dev_err(nau8825->dev, "Unable to set mclk rate\n"); - return ret; - } + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; + + break; + case NAU8825_CLK_FLL_BLK: + /* Acquire the semaphone to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 2 * HZ); + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_BLK); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); + + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; } break; - case NAU8825_CLK_INTERNAL: - regmap_update_bits(regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, - NAU8825_DCO_EN); - regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, - NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + case NAU8825_CLK_FLL_FS: + /* Acquire the semaphone to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 2 * HZ); + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_FS); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); if (nau8825->mclk_freq) { clk_disable_unprepare(nau8825->mclk); @@ -1135,6 +2153,31 @@ static int nau8825_set_sysclk(struct snd_soc_codec *codec, int clk_id, return nau8825_configure_sysclk(nau8825, clk_id, freq); } +static int nau8825_resume_setup(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* Close clock when jack type detection at manual mode */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); + + /* Clear all interruption status */ + nau8825_int_status_clear_all(regmap); + + /* Enable both insertion and ejection interruptions, and then + * bypass de-bounce circuit. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN | + NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0); + + return 0; +} + static int nau8825_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -1157,10 +2200,22 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, return ret; } } + /* Setup codec configuration after resume */ + nau8825_resume_setup(nau8825); } break; case SND_SOC_BIAS_OFF: + /* Cancel and reset cross talk detection funciton */ + nau8825_xtalk_cancel(nau8825); + /* Turn off all interruptions before system shutdown. Keep the + * interruption quiet before resume setup completes. + */ + regmap_write(nau8825->regmap, + NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff); + /* Disable ADC needed for interruptions at audo mode */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, 0); if (nau8825->mclk_freq) clk_disable_unprepare(nau8825->mclk); break; @@ -1168,57 +2223,46 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, return 0; } -#ifdef CONFIG_PM -static int nau8825_suspend(struct snd_soc_codec *codec) +static int __maybe_unused nau8825_suspend(struct snd_soc_codec *codec) { struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); disable_irq(nau8825->irq); + snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_OFF); regcache_cache_only(nau8825->regmap, true); regcache_mark_dirty(nau8825->regmap); return 0; } -static int nau8825_resume(struct snd_soc_codec *codec) +static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) { struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); - /* The chip may lose power and reset in S3. regcache_sync restores - * register values including configurations for sysclk, irq, and - * jack/button detection. - */ regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); - - /* Check the jack plug status directly. If the headset is unplugged - * during S3 when the chip has no power, there will be no jack - * detection irq even after the nau8825_restart_jack_detection below, - * because the chip just thinks no headset has ever been plugged in. - */ - if (!nau8825_is_jack_inserted(nau8825->regmap)) { - nau8825_eject_jack(nau8825); - snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET); + if (nau8825_is_jack_inserted(nau8825->regmap)) { + /* If the jack is inserted, we need to check whether the play- + * back is active before suspend. If active, the driver has to + * raise the protection for cross talk function to avoid the + * playback recovers before cross talk process finish. Other- + * wise, the playback will be interfered by cross talk func- + * tion. It is better to apply hardware related parameters + * before starting playback or record. + */ + if (nau8825_dai_is_active(nau8825)) { + nau8825->xtalk_protect = true; + nau8825_sema_acquire(nau8825, 0); + } } - enable_irq(nau8825->irq); - /* Run jack detection to check the type (OMTP or CTIA) of the headset - * if there is one. This handles the case where a different type of - * headset is plugged in during S3. This triggers an IRQ iff a headset - * is already plugged in. - */ - nau8825_restart_jack_detection(nau8825->regmap); - return 0; } -#else -#define nau8825_suspend NULL -#define nau8825_resume NULL -#endif static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, + .remove = nau8825_codec_remove, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, @@ -1318,22 +2362,8 @@ static int nau8825_read_device_properties(struct device *dev, static int nau8825_setup_irq(struct nau8825 *nau8825) { - struct regmap *regmap = nau8825->regmap; int ret; - /* IRQ Output Enable */ - regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, - NAU8825_IRQ_OUTPUT_EN, NAU8825_IRQ_OUTPUT_EN); - - /* Enable internal VCO needed for interruptions */ - nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); - - /* Enable DDACR needed for interrupts - * It is the same as force_enable_pin("DDACR") we do later - */ - regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, - NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR); - ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "nau8825", nau8825); @@ -1370,6 +2400,13 @@ static int nau8825_i2c_probe(struct i2c_client *i2c, return PTR_ERR(nau8825->regmap); nau8825->dev = dev; nau8825->irq = i2c->irq; + /* Initiate parameters, semaphone and work queue which are needed in + * cross talk suppression measurment function. + */ + nau8825->xtalk_state = NAU8825_XTALK_DONE; + nau8825->xtalk_protect = false; + sema_init(&nau8825->xtalk_sem, 1); + INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); nau8825_print_device_properties(nau8825); @@ -1405,6 +2442,7 @@ static const struct i2c_device_id nau8825_i2c_ids[] = { { "nau8825", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids); #ifdef CONFIG_OF static const struct of_device_id nau8825_of_ids[] = {