mxc_gpio_mode checks for invalid pins and so it returns zero for
success, -EINVAL for invalid pins.
While at it, remove definitions of GPIO_PORT_MAX removed as they are
unused now.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-CFLAGS_iomux-v1.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
MXC_GPIO_IRQ_START)
(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
MXC_GPIO_IRQ_START)
-/*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
#define MXC_SWR(x) (0x3c + ((x) << 8))
#define MXC_PUEN(x) (0x40 + ((x) << 8))
#define MXC_SWR(x) (0x3c + ((x) << 8))
#define MXC_PUEN(x) (0x40 + ((x) << 8))
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX 3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX 5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
+#define MX1_NUM_GPIO_PORT 4
+#define MX21_NUM_GPIO_PORT 6
+#define MX27_NUM_GPIO_PORT 6
#define GPIO_PIN_MASK 0x1f
#define GPIO_PIN_MASK 0x1f
#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
-extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
#endif /* __MACH_IOMUX_V1_H__ */
extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
#endif /* __MACH_IOMUX_V1_H__ */
#include <mach/iomux-v1.h>
static void __iomem *imx_iomuxv1_baseaddr;
#include <mach/iomux-v1.h>
static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
static inline unsigned long imx_iomuxv1_readl(unsigned offset)
{
static inline unsigned long imx_iomuxv1_readl(unsigned offset)
{
imx_iomuxv1_rmwl(offset, mask, value);
}
imx_iomuxv1_rmwl(offset, mask, value);
}
-void mxc_gpio_mode(int gpio_mode)
+int mxc_gpio_mode(int gpio_mode)
{
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
{
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+ if (port >= imx_iomuxv1_numports)
+ return -EINVAL;
+
/* Pullup enable */
imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
/* Pullup enable */
imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
imx_iomuxv1_set_iconfa(port, pin, aout);
imx_iomuxv1_set_iconfb(port, pin, bout);
imx_iomuxv1_set_iconfa(port, pin, aout);
imx_iomuxv1_set_iconfb(port, pin, bout);
}
EXPORT_SYMBOL(mxc_gpio_mode);
}
EXPORT_SYMBOL(mxc_gpio_mode);
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+ size_t i;
+ int ret;
+
+ for (i = 0; i < count; ++i) {
+ ret = mxc_gpio_mode(list[i]);
+
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label)
{
int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label)
{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
- int ret = -EINVAL;
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
+ for (i = 0; i < count; ++i) {
+ unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
ret = gpio_request(gpio, label);
if (ret)
ret = gpio_request(gpio, label);
if (ret)
+ goto err_gpio_request;
+ }
- mxc_gpio_mode(gpio | mode);
+ ret = imx_iomuxv1_setup_multiple(pin_list, count);
+ if (ret)
+ goto err_setup;
+err_setup:
+ BUG_ON(i != count);
+
+err_gpio_request:
mxc_gpio_release_multiple_pins(pin_list, i);
mxc_gpio_release_multiple_pins(pin_list, i);
return ret;
}
EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
{
return ret;
}
EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
{
- const int *p = pin_list;
- int i;
+ size_t i;
+
+ for (i = 0; i < count; ++i) {
+ unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- for (i = 0; i < count; i++) {
- unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
}
}
EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
}
}
EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
static int imx_iomuxv1_init(void)
{
#ifdef CONFIG_ARCH_MX1
static int imx_iomuxv1_init(void)
{
#ifdef CONFIG_ARCH_MX1
imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+ } else
#endif
#ifdef CONFIG_MACH_MX21
#endif
#ifdef CONFIG_MACH_MX21
imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+ } else
#endif
#ifdef CONFIG_MACH_MX27
#endif
#ifdef CONFIG_MACH_MX27
imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+ } else