/* A global or weak symbol is treated as external. */
&& (!S_IS_WEAK (sym) && !S_IS_EXTERNAL (sym)));
}
+\f
+/* Given a MIPS16 variant frag FRAGP and PC-relative operand PCREL_OP
+ convert a section-relative value VAL to the equivalent PC-relative
+ value. */
+
+static offsetT
+mips16_pcrel_val (fragS *fragp, const struct mips_pcrel_operand *pcrel_op,
+ offsetT val, long stretch)
+{
+ fragS *sym_frag;
+ addressT addr;
+
+ gas_assert (pcrel_op->root.root.type == OP_PCREL);
+
+ sym_frag = symbol_get_frag (fragp->fr_symbol);
+
+ /* If the relax_marker of the symbol fragment differs from the
+ relax_marker of this fragment, we have not yet adjusted the
+ symbol fragment fr_address. We want to add in STRETCH in
+ order to get a better estimate of the address. This
+ particularly matters because of the shift bits. */
+ if (stretch != 0 && sym_frag->relax_marker != fragp->relax_marker)
+ {
+ fragS *f;
+
+ /* Adjust stretch for any alignment frag. Note that if have
+ been expanding the earlier code, the symbol may be
+ defined in what appears to be an earlier frag. FIXME:
+ This doesn't handle the fr_subtype field, which specifies
+ a maximum number of bytes to skip when doing an
+ alignment. */
+ for (f = fragp; f != NULL && f != sym_frag; f = f->fr_next)
+ {
+ if (f->fr_type == rs_align || f->fr_type == rs_align_code)
+ {
+ if (stretch < 0)
+ stretch = -(-stretch & ~((1 << (int) f->fr_offset) - 1));
+ else
+ stretch &= ~((1 << (int) f->fr_offset) - 1);
+ if (stretch == 0)
+ break;
+ }
+ }
+ if (f != NULL)
+ val += stretch;
+ }
+
+ addr = fragp->fr_address + fragp->fr_fix;
+
+ /* The base address rules are complicated. The base address of
+ a branch is the following instruction. The base address of a
+ PC relative load or add is the instruction itself, but if it
+ is in a delay slot (in which case it can not be extended) use
+ the address of the instruction whose delay slot it is in. */
+ if (pcrel_op->include_isa_bit)
+ {
+ addr += 2;
+
+ /* If we are currently assuming that this frag should be
+ extended, then the current address is two bytes higher. */
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ addr += 2;
+
+ /* Ignore the low bit in the target, since it will be set
+ for a text label. */
+ val &= -2;
+ }
+ else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
+ addr -= 4;
+ else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
+ addr -= 2;
+ val -= addr & -(1 << pcrel_op->align_log2);
+
+ return val;
+}
/* Given a mips16 variant frag FRAGP, return non-zero if it needs an
extended opcode. SEC is the section the frag is in. */
static int
mips16_extended_frag (fragS *fragp, asection *sec, long stretch)
{
- int type;
const struct mips_int_operand *operand;
offsetT val;
segT symsec;
- fragS *sym_frag;
+ int type;
if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype))
return 0;
: !bfd_is_abs_section (symsec)))
return 1;
- sym_frag = symbol_get_frag (fragp->fr_symbol);
val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
if (operand->root.type == OP_PCREL)
{
const struct mips_pcrel_operand *pcrel_op;
- addressT addr;
offsetT maxtiny;
if (RELAX_MIPS16_ALWAYS_EXTENDED (fragp->fr_subtype))
return 1;
pcrel_op = (const struct mips_pcrel_operand *) operand;
-
- /* If the relax_marker of the symbol fragment differs from the
- relax_marker of this fragment, we have not yet adjusted the
- symbol fragment fr_address. We want to add in STRETCH in
- order to get a better estimate of the address. This
- particularly matters because of the shift bits. */
- if (stretch != 0
- && sym_frag->relax_marker != fragp->relax_marker)
- {
- fragS *f;
-
- /* Adjust stretch for any alignment frag. Note that if have
- been expanding the earlier code, the symbol may be
- defined in what appears to be an earlier frag. FIXME:
- This doesn't handle the fr_subtype field, which specifies
- a maximum number of bytes to skip when doing an
- alignment. */
- for (f = fragp; f != NULL && f != sym_frag; f = f->fr_next)
- {
- if (f->fr_type == rs_align || f->fr_type == rs_align_code)
- {
- if (stretch < 0)
- stretch = - ((- stretch)
- & ~ ((1 << (int) f->fr_offset) - 1));
- else
- stretch &= ~ ((1 << (int) f->fr_offset) - 1);
- if (stretch == 0)
- break;
- }
- }
- if (f != NULL)
- val += stretch;
- }
-
- addr = fragp->fr_address + fragp->fr_fix;
-
- /* The base address rules are complicated. The base address of
- a branch is the following instruction. The base address of a
- PC relative load or add is the instruction itself, but if it
- is in a delay slot (in which case it can not be extended) use
- the address of the instruction whose delay slot it is in. */
- if (pcrel_op->include_isa_bit)
- {
- addr += 2;
-
- /* If we are currently assuming that this frag should be
- extended, then, the current address is two bytes
- higher. */
- if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
- addr += 2;
-
- /* Ignore the low bit in the target, since it will be set
- for a text label. */
- val &= -2;
- }
- else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
- addr -= 4;
- else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
- addr -= 2;
-
- val -= addr & -(1 << pcrel_op->align_log2);
+ val = mips16_pcrel_val (fragp, pcrel_op, val, stretch);
/* If any of the shifted bits are set, we must use an extended
opcode. If the address depends on the size of this
if (operand->root.type == OP_PCREL)
{
const struct mips_pcrel_operand *pcrel_op;
- addressT addr;
pcrel_op = (const struct mips_pcrel_operand *) operand;
- addr = fragp->fr_address + fragp->fr_fix;
- /* The rules for the base address of a PC relative reloc are
- complicated; see mips16_extended_frag. */
- if (pcrel_op->include_isa_bit)
+ if (pcrel_op->include_isa_bit && !need_reloc)
{
- if (!need_reloc)
- {
- if (!ELF_ST_IS_MIPS16 (S_GET_OTHER (fragp->fr_symbol)))
- as_bad_where (fragp->fr_file, fragp->fr_line,
- _("branch to a symbol in another ISA mode"));
- else if ((fragp->fr_offset & 0x1) != 0)
- as_bad_where (fragp->fr_file, fragp->fr_line,
- _("branch to misaligned address (0x%lx)"),
- (long) val);
- }
- addr += 2;
- if (ext)
- addr += 2;
- /* Ignore the low bit in the target, since it will be
- set for a text label. */
- val &= -2;
+ if (!ELF_ST_IS_MIPS16 (S_GET_OTHER (fragp->fr_symbol)))
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("branch to a symbol in another ISA mode"));
+ else if ((fragp->fr_offset & 0x1) != 0)
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("branch to misaligned address (0x%lx)"),
+ (long) val);
}
- else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
- addr -= 4;
- else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
- addr -= 2;
- addr &= -(1 << pcrel_op->align_log2);
- val -= addr;
+ val = mips16_pcrel_val (fragp, pcrel_op, val, 0);
/* Make sure the section winds up with the alignment we have
assumed. */
projects / deliverable / binutils-gdb.git / commitdiff
