Update for hppa*w -> hppa*64* configure name change.

diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index db46e0aeb1f6fa4b8fb24c1a0b2ba076f57854d9..25beca9c3dddf27e2e792048aaf98dfded2104a2 100644 (file)
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,5 +1,9 @@
 2000-09-28  Alan Modra  <alan@linuxcare.com.au>
 
+       * gas/hppa/parse/parse.exp: Replace "hppa*w-*-*" with "hppa*64*-*-*"
+       * gas/hppa/reloc/reloc.exp: Likewise.
+       * gas/hppa/unsorted/unsorted.exp: Likewise.
+
        * gas/hppa/reloc/reduce.s: Modify .PARAM so we need an arg reloc.
 
 2000-09-22  Jim Wilson  <wilson@cygnus.com>

diff --git a/gas/testsuite/gas/hppa/parse/parse.exp b/gas/testsuite/gas/hppa/parse/parse.exp
index 641a679ff5579135efc8d9dbec23da9fddcd1272..e9bfede9e1302172a436eb4e7a296d2862c937dc 100644 (file)
--- a/gas/testsuite/gas/hppa/parse/parse.exp
+++ b/gas/testsuite/gas/hppa/parse/parse.exp
@@ -187,7 +187,7 @@ if [istarget hppa*-*-*] then {
 
     # Bad things happen in the PA ELF backend (others too?) if a non-default
     # section is created...
-    setup_xfail "hppa*-*-*elf*" "hppa*-*-linux*" "hppa*w-*-*"
+    setup_xfail "hppa*-*-*elf*" "hppa*-*-linux*" "hppa*64*-*-*"
     gas_test "ssbug.s" "" "" "Check for acceptance of non-default subspaces"
 
     # To be compatable with certain "features" of the HP compiler

diff --git a/gas/testsuite/gas/hppa/reloc/reloc.exp b/gas/testsuite/gas/hppa/reloc/reloc.exp
index f64bda543918d89de96567cb1eedc5d7d075f32b..889e318c7d4bf73a156b527e35bd54155beb8a39 100644 (file)
--- a/gas/testsuite/gas/hppa/reloc/reloc.exp
+++ b/gas/testsuite/gas/hppa/reloc/reloc.exp
@@ -27,12 +27,14 @@ proc do_ble_relocation_test {} {
     if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
        objdump_start_no_subdir "a.out" "-r"
 
-        if ![istarget hppa*-*-*elf*] then {
+        if {[istarget hppa*64*-*-*]
+           || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
            # At one time both versions of the assembler would incorrectly use 
            # a PC-relative relocation for a BLE instruction.
            while 1 {
                expect {
-                   -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n"        { set x 1 }
+                   -re "^0+\[^\n\]*DIR21L\[^\n\]*\n"   { set x 1 }
+                   -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n"  { set x 1 }
                    -re "\[^\n\]*\n"                            { }
                    timeout                     { perror "timeout\n"; break }
                    eof                         { break }
@@ -43,8 +45,7 @@ proc do_ble_relocation_test {} {
            # a PC-relative relocation for a BLE instruction.
            while 1 {
                expect {
-                   -re "^0+\[^\n\]*DIR21L\[^\n\]*\n"   { set x 1 }
-                   -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n"  { set x 1 }
+                   -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n"        { set x 1 }
                    -re "\[^\n\]*\n"                            { }
                    timeout                     { perror "timeout\n"; break }
                    eof                         { break }
@@ -65,7 +66,7 @@ proc do_relocation_reduction_tests {} {
     set testname "reduce.s: Test relocation reductions (part 2)"
     set x 0
 
-    if {[istarget hppa*w-*-*]
+    if {[istarget hppa*64*-*-*]
         || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
       return;
     }
@@ -243,7 +244,7 @@ proc do_selector_scope_test {} {
     set testname "selectorbug.s: Test scope of field selector" 
     set x 0
 
-    if [istarget hppa*w-*-*] then {
+    if [istarget hppa*64*-*-*] then {
       return;
     }
 
@@ -325,7 +326,8 @@ proc do_exit_relocation_test {} {
     # Elf (osf) does not use ENTRY/EXIT relocations.
     # I guess we could look at the unwind subspaces it builds...
     # Until then, make sure it still assembles.
-    if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
        gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
        return;
     }
@@ -357,12 +359,9 @@ proc do_cross_space_fixup_test_1 {} {
     set testname "fixupbug.s: Test cross space jump/call fixup bug (part 2)"
     set x 0
 
-    if [istarget hppa*w-*-*] then {
-      return;
-    }
-
-    # ELF (osf) doesn't really handle extra sections too well...
-    if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+    # ELF doesn't really handle extra sections too well...
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
        return;
     }
 
@@ -394,12 +393,9 @@ proc do_cross_space_fixup_test_2 {} {
     set testname "fixupbug.s: Test cross space jump/call fixup bug (part 3)"
     set x 0
 
-    if [istarget hppa*w-*-*] then {
-      return;
-    }
-
-    # ELF (osf) doesn't really handle extra sections too well...
-    if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+    # ELF doesn't really handle extra sections too well...
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
        return;
     }
 
@@ -432,7 +428,8 @@ proc do_round_mode_test {} {
        # Make sure GAS generated correct relocations to switch rounding modes.
        # Also make sure (for SOM) that redundant rounding mode relocations
        # were eliminated.
-       if { [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*] || [istarget hppa*w-*-*] } then {
+       if {[istarget hppa*64*-*-*]
+           || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
            while 1 {
                expect {
                    -re "^0+\[^\n\]*DIR21L\[^\n\]*\n"
@@ -485,7 +482,8 @@ proc do_round_mode_test {} {
        objdump_finish
 
        # Did we find what we were looking for?  If not, flunk it.
-       if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*] || [istarget hppa*w-*-*] } then {
+       if {[istarget hppa*64*-*-*]
+           || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
            if [expr $x==8] then { pass $testname } else { fail $testname }
        } else {
            if [expr $x==3] then { pass $testname } else { fail $testname }
@@ -580,12 +578,9 @@ proc do_pic_relocation_test {} {
     set testname "picreloc.s: Test for proper PIC relocation (part 2)"
     set x 0
 
-    if [istarget hppa*w-*-*] then {
-      return;
-    }
-
-    # ELF (osf) doesn't really handle extra sections too well...
-    if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+    # ELF doesn't really handle extra sections too well...
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
        return;
     }
 
@@ -609,11 +604,12 @@ proc do_pic_relocation_test {} {
 }
 
 proc do_apply_test {} {
-    set testname "applybug.s: Test for proper fixup appliation (part 2)"
+    set testname "applybug.s: Test for proper fixup application (part 2)"
     set x 0
 
-    # ELF (osf) doesn't really handle extra sections too well...
-    if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+    # ELF doesn't really handle extra sections too well...
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
        return;
     }
 
@@ -637,6 +633,7 @@ proc do_apply_test {} {
     # Did we find what we were looking for?  If not, flunk it.
     if [expr $x==3] then { pass $testname } else { fail $testname }
 }
+
 if [istarget hppa*-*-*] then {
     # Make sure we put the right relocation entry on a BLE instruction.
     do_ble_relocation_test

diff --git a/gas/testsuite/gas/hppa/unsorted/unsorted.exp b/gas/testsuite/gas/hppa/unsorted/unsorted.exp
index 320f63781f385013f4dc6f30c2a14e770ec98ea0..7db8045de4f796bbbdf1b4fd94b1ecf071f4958d 100644 (file)
--- a/gas/testsuite/gas/hppa/unsorted/unsorted.exp
+++ b/gas/testsuite/gas/hppa/unsorted/unsorted.exp
@@ -24,7 +24,8 @@ proc do_subspace_align_test {} {
     set testname "ss_align.s: Test subspace alignment (part 2)"
     set x 0
 
-    if { [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*] || [istarget hppa*w-*-*] } then {
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
       return 
     }
 
@@ -107,7 +108,8 @@ proc do_align3_test {} {
     set testname "align3.s: Test for alignment bug when switching subspaces (part2)"
     set x 0
 
-    if { [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*] || [istarget hppa*w-*-*] } then {
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
       return 
     }
 
@@ -138,8 +140,9 @@ proc do_align4_test {} {
     set testname "align4.s: More subspace alignment tests (part2)"
     set x 0
 
-    if { [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*] || [istarget hppa*w-*-*] } then {
-       return
+    if {[istarget hppa*64*-*-*]
+       || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+      return 
     }
 
     if [gas_test_old "align4.s" "" "More subspace alignment tests (part1)"] {
@@ -255,6 +258,4 @@ if [istarget hppa*-*-*] then {
 
     # Test for an off-by-2 bug in range check for conditional branches
     gas_test_error "brlenbug.s" "" "Check for error(s) in branch length"
-
 }
-