KVM: x86 emulator: drop unused old-style inline emulation
authorAvi Kivity <avi.kivity@gmail.com>
Sat, 9 Feb 2013 09:31:50 +0000 (11:31 +0200)
committerGleb Natapov <gleb@redhat.com>
Tue, 21 May 2013 12:43:23 +0000 (15:43 +0300)
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
arch/x86/kvm/emulate.c

index 8404dc3509888b136f064dcdfe9ebc204fc43a06..d71aac0bf32f0160a88ef66af8caf093756384f4 100644 (file)
@@ -284,175 +284,18 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
        ctxt->regs_valid = 0;
 }
 
-/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k"              /* force 32-bit operand */
-#define _STK  "%%rsp"          /* stack pointer */
-#elif defined(__i386__)
-#define _LO32 ""               /* force 32-bit operand */
-#define _STK  "%%esp"          /* stack pointer */
-#endif
-
 /*
  * These EFLAGS bits are restored from saved value during emulation, and
  * any changes are written back to the saved value after emulation.
  */
 #define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
 
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp)                                  \
-       /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
-       "movl %"_sav",%"_LO32 _tmp"; "                                  \
-       "push %"_tmp"; "                                                \
-       "push %"_tmp"; "                                                \
-       "movl %"_msk",%"_LO32 _tmp"; "                                  \
-       "andl %"_LO32 _tmp",("_STK"); "                                 \
-       "pushf; "                                                       \
-       "notl %"_LO32 _tmp"; "                                          \
-       "andl %"_LO32 _tmp",("_STK"); "                                 \
-       "andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); "   \
-       "pop  %"_tmp"; "                                                \
-       "orl  %"_LO32 _tmp",("_STK"); "                                 \
-       "popf; "                                                        \
-       "pop  %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
-       /* _sav |= EFLAGS & _msk; */            \
-       "pushf; "                               \
-       "pop  %"_tmp"; "                        \
-       "andl %"_msk",%"_LO32 _tmp"; "          \
-       "orl  %"_LO32 _tmp",%"_sav"; "
-
 #ifdef CONFIG_X86_64
 #define ON64(x) x
 #else
 #define ON64(x)
 #endif
 
-#define ____emulate_2op(ctxt, _op, _x, _y, _suffix, _dsttype)  \
-       do {                                                            \
-               __asm__ __volatile__ (                                  \
-                       _PRE_EFLAGS("0", "4", "2")                      \
-                       _op _suffix " %"_x"3,%1; "                      \
-                       _POST_EFLAGS("0", "4", "2")                     \
-                       : "=m" ((ctxt)->eflags),                        \
-                         "+q" (*(_dsttype*)&(ctxt)->dst.val),          \
-                         "=&r" (_tmp)                                  \
-                       : _y ((ctxt)->src.val), "i" (EFLAGS_MASK));     \
-       } while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(ctxt,_op,_wx,_wy,_lx,_ly,_qx,_qy)         \
-       do {                                                            \
-               unsigned long _tmp;                                     \
-                                                                       \
-               switch ((ctxt)->dst.bytes) {                            \
-               case 2:                                                 \
-                       ____emulate_2op(ctxt,_op,_wx,_wy,"w",u16);      \
-                       break;                                          \
-               case 4:                                                 \
-                       ____emulate_2op(ctxt,_op,_lx,_ly,"l",u32);      \
-                       break;                                          \
-               case 8:                                                 \
-                       ON64(____emulate_2op(ctxt,_op,_qx,_qy,"q",u64)); \
-                       break;                                          \
-               }                                                       \
-       } while (0)
-
-#define __emulate_2op(ctxt,_op,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy)                     \
-       do {                                                                 \
-               unsigned long _tmp;                                          \
-               switch ((ctxt)->dst.bytes) {                                 \
-               case 1:                                                      \
-                       ____emulate_2op(ctxt,_op,_bx,_by,"b",u8);            \
-                       break;                                               \
-               default:                                                     \
-                       __emulate_2op_nobyte(ctxt, _op,                      \
-                                            _wx, _wy, _lx, _ly, _qx, _qy);  \
-                       break;                                               \
-               }                                                            \
-       } while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(ctxt, _op)                                    \
-       __emulate_2op(ctxt, _op, "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(ctxt, _op)                                    \
-       __emulate_2op(ctxt, _op, "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(ctxt, _op)                             \
-       __emulate_2op_nobyte(ctxt, _op, "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(ctxt, _op, _suffix, _type)            \
-       do {                                                            \
-               unsigned long _tmp;                                     \
-               _type _clv  = (ctxt)->src2.val;                         \
-               _type _srcv = (ctxt)->src.val;                          \
-               _type _dstv = (ctxt)->dst.val;                          \
-                                                                       \
-               __asm__ __volatile__ (                                  \
-                       _PRE_EFLAGS("0", "5", "2")                      \
-                       _op _suffix " %4,%1 \n"                         \
-                       _POST_EFLAGS("0", "5", "2")                     \
-                       : "=m" ((ctxt)->eflags), "+r" (_dstv), "=&r" (_tmp) \
-                       : "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK)   \
-                       );                                              \
-                                                                       \
-               (ctxt)->src2.val  = (unsigned long) _clv;               \
-               (ctxt)->src2.val = (unsigned long) _srcv;               \
-               (ctxt)->dst.val = (unsigned long) _dstv;                \
-       } while (0)
-
-#define emulate_2op_cl(ctxt, _op)                                      \
-       do {                                                            \
-               switch ((ctxt)->dst.bytes) {                            \
-               case 2:                                                 \
-                       __emulate_2op_cl(ctxt, _op, "w", u16);          \
-                       break;                                          \
-               case 4:                                                 \
-                       __emulate_2op_cl(ctxt, _op, "l", u32);          \
-                       break;                                          \
-               case 8:                                                 \
-                       ON64(__emulate_2op_cl(ctxt, _op, "q", ulong));  \
-                       break;                                          \
-               }                                                       \
-       } while (0)
-
-#define __emulate_1op(ctxt, _op, _suffix)                              \
-       do {                                                            \
-               unsigned long _tmp;                                     \
-                                                                       \
-               __asm__ __volatile__ (                                  \
-                       _PRE_EFLAGS("0", "3", "2")                      \
-                       _op _suffix " %1; "                             \
-                       _POST_EFLAGS("0", "3", "2")                     \
-                       : "=m" ((ctxt)->eflags), "+m" ((ctxt)->dst.val), \
-                         "=&r" (_tmp)                                  \
-                       : "i" (EFLAGS_MASK));                           \
-       } while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(ctxt, _op)                                         \
-       do {                                                            \
-               switch ((ctxt)->dst.bytes) {                            \
-               case 1: __emulate_1op(ctxt, _op, "b"); break;           \
-               case 2: __emulate_1op(ctxt, _op, "w"); break;           \
-               case 4: __emulate_1op(ctxt, _op, "l"); break;           \
-               case 8: ON64(__emulate_1op(ctxt, _op, "q")); break;     \
-               }                                                       \
-       } while (0)
-
 static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
 
 #define FOP_ALIGN ".align " __stringify(FASTOP_SIZE) " \n\t"
@@ -571,47 +414,6 @@ FOP_END;
 FOP_START(salc) "pushf; sbb %al, %al; popf \n\t" FOP_RET
 FOP_END;
 
-#define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex)                 \
-       do {                                                            \
-               unsigned long _tmp;                                     \
-               ulong *rax = &ctxt->dst.val;                            \
-               ulong *rdx = &ctxt->src.val;                            \
-                                                                       \
-               __asm__ __volatile__ (                                  \
-                       _PRE_EFLAGS("0", "5", "1")                      \
-                       "1: \n\t"                                       \
-                       _op _suffix " %6; "                             \
-                       "2: \n\t"                                       \
-                       _POST_EFLAGS("0", "5", "1")                     \
-                       ".pushsection .fixup,\"ax\" \n\t"               \
-                       "3: movb $1, %4 \n\t"                           \
-                       "jmp 2b \n\t"                                   \
-                       ".popsection \n\t"                              \
-                       _ASM_EXTABLE(1b, 3b)                            \
-                       : "=m" ((ctxt)->eflags), "=&r" (_tmp),          \
-                         "+a" (*rax), "+d" (*rdx), "+qm"(_ex)          \
-                       : "i" (EFLAGS_MASK), "m" ((ctxt)->src2.val));   \
-       } while (0)
-
-/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
-#define emulate_1op_rax_rdx(ctxt, _op, _ex)    \
-       do {                                                            \
-               switch((ctxt)->src.bytes) {                             \
-               case 1:                                                 \
-                       __emulate_1op_rax_rdx(ctxt, _op, "b", _ex);     \
-                       break;                                          \
-               case 2:                                                 \
-                       __emulate_1op_rax_rdx(ctxt, _op, "w", _ex);     \
-                       break;                                          \
-               case 4:                                                 \
-                       __emulate_1op_rax_rdx(ctxt, _op, "l", _ex);     \
-                       break;                                          \
-               case 8: ON64(                                           \
-                       __emulate_1op_rax_rdx(ctxt, _op, "q", _ex));    \
-                       break;                                          \
-               }                                                       \
-       } while (0)
-
 static int emulator_check_intercept(struct x86_emulate_ctxt *ctxt,
                                    enum x86_intercept intercept,
                                    enum x86_intercept_stage stage)
This page took 0.047154 seconds and 5 git commands to generate.