--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ Portions of this file are based on the sample_* files provided by Wireless
+ Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
+ <jt@hpl.hp.com>
+
+ Portions of this file are based on the Host AP project,
+ Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ <jkmaline@cc.hut.fi>
+ Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+ Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
+ ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
+ available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
+
+******************************************************************************/
+/*
+
+ Initial driver on which this is based was developed by Janusz Gorycki,
+ Maciej Urbaniak, and Maciej Sosnowski.
+
+ Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
+
+Theory of Operation
+
+Tx - Commands and Data
+
+Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
+Each TBD contains a pointer to the physical (dma_addr_t) address of data being
+sent to the firmware as well as the length of the data.
+
+The host writes to the TBD queue at the WRITE index. The WRITE index points
+to the _next_ packet to be written and is advanced when after the TBD has been
+filled.
+
+The firmware pulls from the TBD queue at the READ index. The READ index points
+to the currently being read entry, and is advanced once the firmware is
+done with a packet.
+
+When data is sent to the firmware, the first TBD is used to indicate to the
+firmware if a Command or Data is being sent. If it is Command, all of the
+command information is contained within the physical address referred to by the
+TBD. If it is Data, the first TBD indicates the type of data packet, number
+of fragments, etc. The next TBD then referrs to the actual packet location.
+
+The Tx flow cycle is as follows:
+
+1) ipw2100_tx() is called by kernel with SKB to transmit
+2) Packet is move from the tx_free_list and appended to the transmit pending
+ list (tx_pend_list)
+3) work is scheduled to move pending packets into the shared circular queue.
+4) when placing packet in the circular queue, the incoming SKB is DMA mapped
+ to a physical address. That address is entered into a TBD. Two TBDs are
+ filled out. The first indicating a data packet, the second referring to the
+ actual payload data.
+5) the packet is removed from tx_pend_list and placed on the end of the
+ firmware pending list (fw_pend_list)
+6) firmware is notified that the WRITE index has
+7) Once the firmware has processed the TBD, INTA is triggered.
+8) For each Tx interrupt received from the firmware, the READ index is checked
+ to see which TBDs are done being processed.
+9) For each TBD that has been processed, the ISR pulls the oldest packet
+ from the fw_pend_list.
+10)The packet structure contained in the fw_pend_list is then used
+ to unmap the DMA address and to free the SKB originally passed to the driver
+ from the kernel.
+11)The packet structure is placed onto the tx_free_list
+
+The above steps are the same for commands, only the msg_free_list/msg_pend_list
+are used instead of tx_free_list/tx_pend_list
+
+...
+
+Critical Sections / Locking :
+
+There are two locks utilized. The first is the low level lock (priv->low_lock)
+that protects the following:
+
+- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
+
+ tx_free_list : Holds pre-allocated Tx buffers.
+ TAIL modified in __ipw2100_tx_process()
+ HEAD modified in ipw2100_tx()
+
+ tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
+ TAIL modified ipw2100_tx()
+ HEAD modified by X__ipw2100_tx_send_data()
+
+ msg_free_list : Holds pre-allocated Msg (Command) buffers
+ TAIL modified in __ipw2100_tx_process()
+ HEAD modified in ipw2100_hw_send_command()
+
+ msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
+ TAIL modified in ipw2100_hw_send_command()
+ HEAD modified in X__ipw2100_tx_send_commands()
+
+ The flow of data on the TX side is as follows:
+
+ MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
+ TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
+
+ The methods that work on the TBD ring are protected via priv->low_lock.
+
+- The internal data state of the device itself
+- Access to the firmware read/write indexes for the BD queues
+ and associated logic
+
+All external entry functions are locked with the priv->action_lock to ensure
+that only one external action is invoked at a time.
+
+
+*/
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#define __KERNEL_SYSCALLS__
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/unistd.h>
+#include <linux/stringify.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/time.h>
+#include <linux/firmware.h>
+#include <linux/acpi.h>
+#include <linux/ctype.h>
+
+#include "ipw2100.h"
+
+#define IPW2100_VERSION "1.1.0"
+
+#define DRV_NAME "ipw2100"
+#define DRV_VERSION IPW2100_VERSION
+#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation"
+
+
+/* Debugging stuff */
+#ifdef CONFIG_IPW_DEBUG
+#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
+#endif
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+static int mode = 0;
+static int channel = 0;
+static int associate = 1;
+static int disable = 0;
+#ifdef CONFIG_PM
+static struct ipw2100_fw ipw2100_firmware;
+#endif
+
+#include <linux/moduleparam.h>
+module_param(debug, int, 0444);
+module_param(mode, int, 0444);
+module_param(channel, int, 0444);
+module_param(associate, int, 0444);
+module_param(disable, int, 0444);
+
+MODULE_PARM_DESC(debug, "debug level");
+MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
+MODULE_PARM_DESC(channel, "channel");
+MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
+MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
+
+u32 ipw2100_debug_level = IPW_DL_NONE;
+
+#ifdef CONFIG_IPW_DEBUG
+static const char *command_types[] = {
+ "undefined",
+ "unused", /* HOST_ATTENTION */
+ "HOST_COMPLETE",
+ "unused", /* SLEEP */
+ "unused", /* HOST_POWER_DOWN */
+ "unused",
+ "SYSTEM_CONFIG",
+ "unused", /* SET_IMR */
+ "SSID",
+ "MANDATORY_BSSID",
+ "AUTHENTICATION_TYPE",
+ "ADAPTER_ADDRESS",
+ "PORT_TYPE",
+ "INTERNATIONAL_MODE",
+ "CHANNEL",
+ "RTS_THRESHOLD",
+ "FRAG_THRESHOLD",
+ "POWER_MODE",
+ "TX_RATES",
+ "BASIC_TX_RATES",
+ "WEP_KEY_INFO",
+ "unused",
+ "unused",
+ "unused",
+ "unused",
+ "WEP_KEY_INDEX",
+ "WEP_FLAGS",
+ "ADD_MULTICAST",
+ "CLEAR_ALL_MULTICAST",
+ "BEACON_INTERVAL",
+ "ATIM_WINDOW",
+ "CLEAR_STATISTICS",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "TX_POWER_INDEX",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "BROADCAST_SCAN",
+ "CARD_DISABLE",
+ "PREFERRED_BSSID",
+ "SET_SCAN_OPTIONS",
+ "SCAN_DWELL_TIME",
+ "SWEEP_TABLE",
+ "AP_OR_STATION_TABLE",
+ "GROUP_ORDINALS",
+ "SHORT_RETRY_LIMIT",
+ "LONG_RETRY_LIMIT",
+ "unused", /* SAVE_CALIBRATION */
+ "unused", /* RESTORE_CALIBRATION */
+ "undefined",
+ "undefined",
+ "undefined",
+ "HOST_PRE_POWER_DOWN",
+ "unused", /* HOST_INTERRUPT_COALESCING */
+ "undefined",
+ "CARD_DISABLE_PHY_OFF",
+ "MSDU_TX_RATES"
+ "undefined",
+ "undefined",
+ "SET_STATION_STAT_BITS",
+ "CLEAR_STATIONS_STAT_BITS",
+ "LEAP_ROGUE_MODE",
+ "SET_SECURITY_INFORMATION",
+ "DISASSOCIATION_BSSID",
+ "SET_WPA_ASS_IE"
+};
+#endif
+
+
+/* Pre-decl until we get the code solid and then we can clean it up */
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv);
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv);
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
+
+static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
+static void ipw2100_queues_free(struct ipw2100_priv *priv);
+static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
+
+
+static inline void read_register(struct net_device *dev, u32 reg, u32 *val)
+{
+ *val = readl((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
+}
+
+static inline void write_register(struct net_device *dev, u32 reg, u32 val)
+{
+ writel(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
+}
+
+static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val)
+{
+ *val = readw((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
+}
+
+static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val)
+{
+ *val = readb((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
+}
+
+static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
+{
+ writew(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
+}
+
+
+static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
+{
+ writeb(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
+}
+
+static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
+{
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+}
+
+static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
+{
+ write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
+}
+
+static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
+ const u8 *buf)
+{
+ u32 aligned_addr;
+ u32 aligned_len;
+ u32 dif_len;
+ u32 i;
+
+ /* read first nibble byte by byte */
+ aligned_addr = addr & (~0x3);
+ dif_len = addr - aligned_addr;
+ if (dif_len) {
+ /* Start reading at aligned_addr + dif_len */
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ write_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
+ *buf);
+
+ len -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* read DWs through autoincrement registers */
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ aligned_addr);
+ aligned_len = len & (~0x3);
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ write_register(
+ dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf);
+
+ /* copy the last nibble */
+ dif_len = len - aligned_len;
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ write_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf);
+}
+
+static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
+ u8 *buf)
+{
+ u32 aligned_addr;
+ u32 aligned_len;
+ u32 dif_len;
+ u32 i;
+
+ /* read first nibble byte by byte */
+ aligned_addr = addr & (~0x3);
+ dif_len = addr - aligned_addr;
+ if (dif_len) {
+ /* Start reading at aligned_addr + dif_len */
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ read_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
+
+ len -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* read DWs through autoincrement registers */
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ aligned_addr);
+ aligned_len = len & (~0x3);
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ read_register(dev, IPW_REG_AUTOINCREMENT_DATA,
+ (u32 *)buf);
+
+ /* copy the last nibble */
+ dif_len = len - aligned_len;
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA +
+ i, buf);
+}
+
+static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
+{
+ return (dev->base_addr &&
+ (readl((void *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START))
+ == IPW_DATA_DOA_DEBUG_VALUE));
+}
+
+int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
+ void *val, u32 *len)
+{
+ struct ipw2100_ordinals *ordinals = &priv->ordinals;
+ u32 addr;
+ u32 field_info;
+ u16 field_len;
+ u16 field_count;
+ u32 total_length;
+
+ if (ordinals->table1_addr == 0) {
+ IPW_DEBUG_WARNING(DRV_NAME ": attempt to use fw ordinals "
+ "before they have been loaded.\n");
+ return -EINVAL;
+ }
+
+ if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+ if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": ordinal buffer length too small, need %d\n",
+ IPW_ORD_TAB_1_ENTRY_SIZE);
+
+ return -EINVAL;
+ }
+
+ read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+ &addr);
+ read_nic_dword(priv->net_dev, addr, val);
+
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ return 0;
+ }
+
+ if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
+
+ ord -= IPW_START_ORD_TAB_2;
+
+ /* get the address of statistic */
+ read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3),
+ &addr);
+
+ /* get the second DW of statistics ;
+ * two 16-bit words - first is length, second is count */
+ read_nic_dword(priv->net_dev,
+ ordinals->table2_addr + (ord << 3) + sizeof(u32),
+ &field_info);
+
+ /* get each entry length */
+ field_len = *((u16 *)&field_info);
+
+ /* get number of entries */
+ field_count = *(((u16 *)&field_info) + 1);
+
+ /* abort if no enought memory */
+ total_length = field_len * field_count;
+ if (total_length > *len) {
+ *len = total_length;
+ return -EINVAL;
+ }
+
+ *len = total_length;
+ if (!total_length)
+ return 0;
+
+ /* read the ordinal data from the SRAM */
+ read_nic_memory(priv->net_dev, addr, total_length, val);
+
+ return 0;
+ }
+
+ IPW_DEBUG_WARNING(DRV_NAME ": ordinal %d neither in table 1 nor "
+ "in table 2\n", ord);
+
+ return -EINVAL;
+}
+
+static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val,
+ u32 *len)
+{
+ struct ipw2100_ordinals *ordinals = &priv->ordinals;
+ u32 addr;
+
+ if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+ if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+ IPW_DEBUG_INFO("wrong size\n");
+ return -EINVAL;
+ }
+
+ read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+ &addr);
+
+ write_nic_dword(priv->net_dev, addr, *val);
+
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ return 0;
+ }
+
+ IPW_DEBUG_INFO("wrong table\n");
+ if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
+ return -EINVAL;
+
+ return -EINVAL;
+}
+
+static char *snprint_line(char *buf, size_t count,
+ const u8 *data, u32 len, u32 ofs)
+{
+ int out, i, j, l;
+ char c;
+
+ out = snprintf(buf, count, "%08X", ofs);
+
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++)
+ out += snprintf(buf + out, count - out, "%02X ",
+ data[(i * 8 + j)]);
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ out += snprintf(buf + out, count - out, " ");
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++) {
+ c = data[(i * 8 + j)];
+ if (!isascii(c) || !isprint(c))
+ c = '.';
+
+ out += snprintf(buf + out, count - out, "%c", c);
+ }
+
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ return buf;
+}
+
+static void printk_buf(int level, const u8 *data, u32 len)
+{
+ char line[81];
+ u32 ofs = 0;
+ if (!(ipw2100_debug_level & level))
+ return;
+
+ while (len) {
+ printk(KERN_DEBUG "%s\n",
+ snprint_line(line, sizeof(line), &data[ofs],
+ min(len, 16U), ofs));
+ ofs += 16;
+ len -= min(len, 16U);
+ }
+}
+
+
+
+#define MAX_RESET_BACKOFF 10
+
+static inline void schedule_reset(struct ipw2100_priv *priv)
+{
+ unsigned long now = get_seconds();
+
+ /* If we haven't received a reset request within the backoff period,
+ * then we can reset the backoff interval so this reset occurs
+ * immediately */
+ if (priv->reset_backoff &&
+ (now - priv->last_reset > priv->reset_backoff))
+ priv->reset_backoff = 0;
+
+ priv->last_reset = get_seconds();
+
+ if (!(priv->status & STATUS_RESET_PENDING)) {
+ IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
+ priv->net_dev->name, priv->reset_backoff);
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+ priv->status |= STATUS_RESET_PENDING;
+ if (priv->reset_backoff)
+ queue_delayed_work(priv->workqueue, &priv->reset_work,
+ priv->reset_backoff * HZ);
+ else
+ queue_work(priv->workqueue, &priv->reset_work);
+
+ if (priv->reset_backoff < MAX_RESET_BACKOFF)
+ priv->reset_backoff++;
+
+ wake_up_interruptible(&priv->wait_command_queue);
+ } else
+ IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
+ priv->net_dev->name);
+
+}
+
+#define HOST_COMPLETE_TIMEOUT (2 * HZ)
+static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
+ struct host_command * cmd)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ unsigned long flags;
+ int err = 0;
+
+ IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
+ command_types[cmd->host_command], cmd->host_command,
+ cmd->host_command_length);
+ printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters,
+ cmd->host_command_length);
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n");
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ if (!(priv->status & STATUS_RUNNING)) {
+ IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n");
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ if (priv->status & STATUS_CMD_ACTIVE) {
+ IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n");
+ err = -EBUSY;
+ goto fail_unlock;
+ }
+
+ if (list_empty(&priv->msg_free_list)) {
+ IPW_DEBUG_INFO("no available msg buffers\n");
+ goto fail_unlock;
+ }
+
+ priv->status |= STATUS_CMD_ACTIVE;
+ priv->messages_sent++;
+
+ element = priv->msg_free_list.next;
+
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+ packet->jiffy_start = jiffies;
+
+ /* initialize the firmware command packet */
+ packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
+ packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
+ packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length;
+ packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
+
+ memcpy(packet->info.c_struct.cmd->host_command_params_reg,
+ cmd->host_command_parameters,
+ sizeof(packet->info.c_struct.cmd->host_command_params_reg));
+
+ list_del(element);
+ DEC_STAT(&priv->msg_free_stat);
+
+ list_add_tail(element, &priv->msg_pend_list);
+ INC_STAT(&priv->msg_pend_stat);
+
+ X__ipw2100_tx_send_commands(priv);
+ X__ipw2100_tx_send_data(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ /*
+ * We must wait for this command to complete before another
+ * command can be sent... but if we wait more than 3 seconds
+ * then there is a problem.
+ */
+
+ err = wait_event_interruptible_timeout(
+ priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE),
+ HOST_COMPLETE_TIMEOUT);
+
+ if (err == 0) {
+ IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
+ HOST_COMPLETE_TIMEOUT / (HZ / 100));
+ priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
+ priv->status &= ~STATUS_CMD_ACTIVE;
+ schedule_reset(priv);
+ return -EIO;
+ }
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_WARNING("%s: firmware fatal error\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* !!!!! HACK TEST !!!!!
+ * When lots of debug trace statements are enabled, the driver
+ * doesn't seem to have as many firmware restart cycles...
+ *
+ * As a test, we're sticking in a 1/100s delay here */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ / 100);
+
+ return 0;
+
+ fail_unlock:
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ return err;
+}
+
+
+/*
+ * Verify the values and data access of the hardware
+ * No locks needed or used. No functions called.
+ */
+static int ipw2100_verify(struct ipw2100_priv *priv)
+{
+ u32 data1, data2;
+ u32 address;
+
+ u32 val1 = 0x76543210;
+ u32 val2 = 0xFEDCBA98;
+
+ /* Domain 0 check - all values should be DOA_DEBUG */
+ for (address = IPW_REG_DOA_DEBUG_AREA_START;
+ address < IPW_REG_DOA_DEBUG_AREA_END;
+ address += sizeof(u32)) {
+ read_register(priv->net_dev, address, &data1);
+ if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
+ return -EIO;
+ }
+
+ /* Domain 1 check - use arbitrary read/write compare */
+ for (address = 0; address < 5; address++) {
+ /* The memory area is not used now */
+ write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+ val1);
+ write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+ val2);
+ read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+ &data1);
+ read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+ &data2);
+ if (val1 == data1 && val2 == data2)
+ return 0;
+ }
+
+ return -EIO;
+}
+
+/*
+ *
+ * Loop until the CARD_DISABLED bit is the same value as the
+ * supplied parameter
+ *
+ * TODO: See if it would be more efficient to do a wait/wake
+ * cycle and have the completion event trigger the wakeup
+ *
+ */
+#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
+static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
+{
+ int i;
+ u32 card_state;
+ u32 len = sizeof(card_state);
+ int err;
+
+ for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
+ err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
+ &card_state, &len);
+ if (err) {
+ IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
+ "failed.\n");
+ return 0;
+ }
+
+ /* We'll break out if either the HW state says it is
+ * in the state we want, or if HOST_COMPLETE command
+ * finishes */
+ if ((card_state == state) ||
+ ((priv->status & STATUS_ENABLED) ?
+ IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
+ if (state == IPW_HW_STATE_ENABLED)
+ priv->status |= STATUS_ENABLED;
+ else
+ priv->status &= ~STATUS_ENABLED;
+
+ return 0;
+ }
+
+ udelay(50);
+ }
+
+ IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
+ state ? "DISABLED" : "ENABLED");
+ return -EIO;
+}
+
+
+/*********************************************************************
+ Procedure : sw_reset_and_clock
+ Purpose : Asserts s/w reset, asserts clock initialization
+ and waits for clock stabilization
+ ********************************************************************/
+static int sw_reset_and_clock(struct ipw2100_priv *priv)
+{
+ int i;
+ u32 r;
+
+ // assert s/w reset
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+ // wait for clock stabilization
+ for (i = 0; i < 1000; i++) {
+ udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
+
+ // check clock ready bit
+ read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
+ if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
+ break;
+ }
+
+ if (i == 1000)
+ return -EIO; // TODO: better error value
+
+ /* set "initialization complete" bit to move adapter to
+ * D0 state */
+ write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+ IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
+
+ /* wait for clock stabilization */
+ for (i = 0; i < 10000; i++) {
+ udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
+
+ /* check clock ready bit */
+ read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+ if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
+ break;
+ }
+
+ if (i == 10000)
+ return -EIO; /* TODO: better error value */
+
+//#if CONFIG_IPW2100_D0ENABLED
+ /* set D0 standby bit */
+ read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+ write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+ r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
+//#endif
+
+ return 0;
+}
+
+/*********************************************************************
+ Procedure : ipw2100_ipw2100_download_firmware
+ Purpose : Initiaze adapter after power on.
+ The sequence is:
+ 1. assert s/w reset first!
+ 2. awake clocks & wait for clock stabilization
+ 3. hold ARC (don't ask me why...)
+ 4. load Dino ucode and reset/clock init again
+ 5. zero-out shared mem
+ 6. download f/w
+ *******************************************************************/
+static int ipw2100_download_firmware(struct ipw2100_priv *priv)
+{
+ u32 address;
+ int err;
+
+#ifndef CONFIG_PM
+ /* Fetch the firmware and microcode */
+ struct ipw2100_fw ipw2100_firmware;
+#endif
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
+ "fatal error %d. Interface must be brought down.\n",
+ priv->net_dev->name, priv->fatal_error);
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_PM
+ if (!ipw2100_firmware.version) {
+ err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+ priv->net_dev->name, err);
+ priv->fatal_error = IPW2100_ERR_FW_LOAD;
+ goto fail;
+ }
+ }
+#else
+ err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+ priv->net_dev->name, err);
+ priv->fatal_error = IPW2100_ERR_FW_LOAD;
+ goto fail;
+ }
+#endif
+ priv->firmware_version = ipw2100_firmware.version;
+
+ /* s/w reset and clock stabilization */
+ err = sw_reset_and_clock(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ err = ipw2100_verify(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* Hold ARC */
+ write_nic_dword(priv->net_dev,
+ IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+ 0x80000000);
+
+ /* allow ARC to run */
+ write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+ /* load microcode */
+ err = ipw2100_ucode_download(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Error loading microcode: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* release ARC */
+ write_nic_dword(priv->net_dev,
+ IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+ 0x00000000);
+
+ /* s/w reset and clock stabilization (again!!!) */
+ err = sw_reset_and_clock(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* load f/w */
+ err = ipw2100_fw_download(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+#ifndef CONFIG_PM
+ /*
+ * When the .resume method of the driver is called, the other
+ * part of the system, i.e. the ide driver could still stay in
+ * the suspend stage. This prevents us from loading the firmware
+ * from the disk. --YZ
+ */
+
+ /* free any storage allocated for firmware image */
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+
+ /* zero out Domain 1 area indirectly (Si requirement) */
+ for (address = IPW_HOST_FW_SHARED_AREA0;
+ address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA1;
+ address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA2;
+ address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA3;
+ address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_INTERRUPT_AREA;
+ address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+
+ return 0;
+
+ fail:
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+ return err;
+}
+
+static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
+{
+ if (priv->status & STATUS_INT_ENABLED)
+ return;
+ priv->status |= STATUS_INT_ENABLED;
+ write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
+}
+
+static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
+{
+ if (!(priv->status & STATUS_INT_ENABLED))
+ return;
+ priv->status &= ~STATUS_INT_ENABLED;
+ write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
+}
+
+
+static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
+{
+ struct ipw2100_ordinals *ord = &priv->ordinals;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
+ &ord->table1_addr);
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
+ &ord->table2_addr);
+
+ read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
+ read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
+
+ ord->table2_size &= 0x0000FFFF;
+
+ IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
+ IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
+{
+ u32 reg = 0;
+ /*
+ * Set GPIO 3 writable by FW; GPIO 1 writable
+ * by driver and enable clock
+ */
+ reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
+ IPW_BIT_GPIO_LED_OFF);
+ write_register(priv->net_dev, IPW_REG_GPIO, reg);
+}
+
+static inline int rf_kill_active(struct ipw2100_priv *priv)
+{
+#define MAX_RF_KILL_CHECKS 5
+#define RF_KILL_CHECK_DELAY 40
+#define RF_KILL_CHECK_THRESHOLD 3
+
+ unsigned short value = 0;
+ u32 reg = 0;
+ int i;
+
+ if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
+ priv->status &= ~STATUS_RF_KILL_HW;
+ return 0;
+ }
+
+ for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
+ udelay(RF_KILL_CHECK_DELAY);
+ read_register(priv->net_dev, IPW_REG_GPIO, ®);
+ value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
+ }
+
+ if (value == 0)
+ priv->status |= STATUS_RF_KILL_HW;
+ else
+ priv->status &= ~STATUS_RF_KILL_HW;
+
+ return (value == 0);
+}
+
+static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
+{
+ u32 addr, len;
+ u32 val;
+
+ /*
+ * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
+ */
+ len = sizeof(addr);
+ if (ipw2100_get_ordinal(
+ priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
+ &addr, &len)) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return -EIO;
+ }
+
+ IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
+
+ /*
+ * EEPROM version is the byte at offset 0xfd in firmware
+ * We read 4 bytes, then shift out the byte we actually want */
+ read_nic_dword(priv->net_dev, addr + 0xFC, &val);
+ priv->eeprom_version = (val >> 24) & 0xFF;
+ IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
+
+ /*
+ * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
+ *
+ * notice that the EEPROM bit is reverse polarity, i.e.
+ * bit = 0 signifies HW RF kill switch is supported
+ * bit = 1 signifies HW RF kill switch is NOT supported
+ */
+ read_nic_dword(priv->net_dev, addr + 0x20, &val);
+ if (!((val >> 24) & 0x01))
+ priv->hw_features |= HW_FEATURE_RFKILL;
+
+ IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
+ (priv->hw_features & HW_FEATURE_RFKILL) ?
+ "" : "not ");
+
+ return 0;
+}
+
+/*
+ * Start firmware execution after power on and intialization
+ * The sequence is:
+ * 1. Release ARC
+ * 2. Wait for f/w initialization completes;
+ */
+static int ipw2100_start_adapter(struct ipw2100_priv *priv)
+{
+#define IPW_WAIT_FW_INIT_COMPLETE_DELAY (40 * HZ / 1000)
+ int i;
+ u32 inta, inta_mask, gpio;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->status & STATUS_RUNNING)
+ return 0;
+
+ /*
+ * Initialize the hw - drive adapter to DO state by setting
+ * init_done bit. Wait for clk_ready bit and Download
+ * fw & dino ucode
+ */
+ if (ipw2100_download_firmware(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to power on the adapter.\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* Clear the Tx, Rx and Msg queues and the r/w indexes
+ * in the firmware RBD and TBD ring queue */
+ ipw2100_queues_initialize(priv);
+
+ ipw2100_hw_set_gpio(priv);
+
+ /* TODO -- Look at disabling interrupts here to make sure none
+ * get fired during FW initialization */
+
+ /* Release ARC - clear reset bit */
+ write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+ /* wait for f/w intialization complete */
+ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
+ i = 5000;
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(IPW_WAIT_FW_INIT_COMPLETE_DELAY);
+ /* Todo... wait for sync command ... */
+
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+ /* check "init done" bit */
+ if (inta & IPW2100_INTA_FW_INIT_DONE) {
+ /* reset "init done" bit */
+ write_register(priv->net_dev, IPW_REG_INTA,
+ IPW2100_INTA_FW_INIT_DONE);
+ break;
+ }
+
+ /* check error conditions : we check these after the firmware
+ * check so that if there is an error, the interrupt handler
+ * will see it and the adapter will be reset */
+ if (inta &
+ (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
+ /* clear error conditions */
+ write_register(priv->net_dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR);
+ }
+ } while (i--);
+
+ /* Clear out any pending INTAs since we aren't supposed to have
+ * interrupts enabled at this point... */
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+ read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+ inta &= IPW_INTERRUPT_MASK;
+ /* Clear out any pending interrupts */
+ if (inta & inta_mask)
+ write_register(priv->net_dev, IPW_REG_INTA, inta);
+
+ IPW_DEBUG_FW("f/w initialization complete: %s\n",
+ i ? "SUCCESS" : "FAILED");
+
+ if (!i) {
+ IPW_DEBUG_WARNING("%s: Firmware did not initialize.\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* allow firmware to write to GPIO1 & GPIO3 */
+ read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
+
+ gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
+
+ write_register(priv->net_dev, IPW_REG_GPIO, gpio);
+
+ /* Ready to receive commands */
+ priv->status |= STATUS_RUNNING;
+
+ /* The adapter has been reset; we are not associated */
+ priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
+{
+ if (!priv->fatal_error)
+ return;
+
+ priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
+ priv->fatal_index %= IPW2100_ERROR_QUEUE;
+ priv->fatal_error = 0;
+}
+
+
+/* NOTE: Our interrupt is disabled when this method is called */
+static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
+{
+ u32 reg;
+ int i;
+
+ IPW_DEBUG_INFO("Power cycling the hardware.\n");
+
+ ipw2100_hw_set_gpio(priv);
+
+ /* Step 1. Stop Master Assert */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+ /* Step 2. Wait for stop Master Assert
+ * (not more then 50us, otherwise ret error */
+ i = 5;
+ do {
+ udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ } while(i--);
+
+ priv->status &= ~STATUS_RESET_PENDING;
+
+ if (!i) {
+ IPW_DEBUG_INFO("exit - waited too long for master assert stop\n");
+ return -EIO;
+ }
+
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+
+ /* Reset any fatal_error conditions */
+ ipw2100_reset_fatalerror(priv);
+
+ /* At this point, the adapter is now stopped and disabled */
+ priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
+ STATUS_ASSOCIATED | STATUS_ENABLED);
+
+ return 0;
+}
+
+/*
+ * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
+ *
+ * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
+ *
+ * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
+ * if STATUS_ASSN_LOST is sent.
+ */
+static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
+{
+
+#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
+
+ struct host_command cmd = {
+ .host_command = CARD_DISABLE_PHY_OFF,
+ .host_command_sequence = 0,
+ .host_command_length = 0,
+ };
+ int err, i;
+ u32 val1, val2;
+
+ IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
+
+ /* Turn off the radio */
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ for (i = 0; i < 2500; i++) {
+ read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
+ read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
+
+ if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
+ (val2 & IPW2100_COMMAND_PHY_OFF))
+ return 0;
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
+ }
+
+ return -EIO;
+}
+
+
+static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = HOST_COMPLETE,
+ .host_command_sequence = 0,
+ .host_command_length = 0
+ };
+ int err = 0;
+
+ IPW_DEBUG_HC("HOST_COMPLETE\n");
+
+ if (priv->status & STATUS_ENABLED)
+ return 0;
+
+ down(&priv->adapter_sem);
+
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
+ if (err) {
+ IPW_DEBUG_INFO(
+ "%s: card not responding to init command.\n",
+ priv->net_dev->name);
+ goto fail_up;
+ }
+
+ if (priv->stop_hang_check) {
+ priv->stop_hang_check = 0;
+ queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+ }
+
+fail_up:
+ up(&priv->adapter_sem);
+ return err;
+}
+
+static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
+{
+#define HW_POWER_DOWN_DELAY (HZ / 10)
+
+ struct host_command cmd = {
+ .host_command = HOST_PRE_POWER_DOWN,
+ .host_command_sequence = 0,
+ .host_command_length = 0,
+ };
+ int err, i;
+ u32 reg;
+
+ if (!(priv->status & STATUS_RUNNING))
+ return 0;
+
+ priv->status |= STATUS_STOPPING;
+
+ /* We can only shut down the card if the firmware is operational. So,
+ * if we haven't reset since a fatal_error, then we can not send the
+ * shutdown commands. */
+ if (!priv->fatal_error) {
+ /* First, make sure the adapter is enabled so that the PHY_OFF
+ * command can shut it down */
+ ipw2100_enable_adapter(priv);
+
+ err = ipw2100_hw_phy_off(priv);
+ if (err)
+ IPW_DEBUG_WARNING("Error disabling radio %d\n", err);
+
+ /*
+ * If in D0-standby mode going directly to D3 may cause a
+ * PCI bus violation. Therefore we must change out of the D0
+ * state.
+ *
+ * Sending the PREPARE_FOR_POWER_DOWN will restrict the
+ * hardware from going into standby mode and will transition
+ * out of D0-standy if it is already in that state.
+ *
+ * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
+ * driver upon completion. Once received, the driver can
+ * proceed to the D3 state.
+ *
+ * Prepare for power down command to fw. This command would
+ * take HW out of D0-standby and prepare it for D3 state.
+ *
+ * Currently FW does not support event notification for this
+ * event. Therefore, skip waiting for it. Just wait a fixed
+ * 100ms
+ */
+ IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ IPW_DEBUG_WARNING(
+ "%s: Power down command failed: Error %d\n",
+ priv->net_dev->name, err);
+ else {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HW_POWER_DOWN_DELAY);
+ }
+ }
+
+ priv->status &= ~STATUS_ENABLED;
+
+ /*
+ * Set GPIO 3 writable by FW; GPIO 1 writable
+ * by driver and enable clock
+ */
+ ipw2100_hw_set_gpio(priv);
+
+ /*
+ * Power down adapter. Sequence:
+ * 1. Stop master assert (RESET_REG[9]=1)
+ * 2. Wait for stop master (RESET_REG[8]==1)
+ * 3. S/w reset assert (RESET_REG[7] = 1)
+ */
+
+ /* Stop master assert */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+ /* wait stop master not more than 50 usec.
+ * Otherwise return error. */
+ for (i = 5; i > 0; i--) {
+ udelay(10);
+
+ /* Check master stop bit */
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ }
+
+ if (i == 0)
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": %s: Could now power down adapter.\n",
+ priv->net_dev->name);
+
+ /* assert s/w reset */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+ priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
+
+ return 0;
+}
+
+
+static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = CARD_DISABLE,
+ .host_command_sequence = 0,
+ .host_command_length = 0
+ };
+ int err = 0;
+
+ IPW_DEBUG_HC("CARD_DISABLE\n");
+
+ if (!(priv->status & STATUS_ENABLED))
+ return 0;
+
+ /* Make sure we clear the associated state */
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+ if (!priv->stop_hang_check) {
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+ }
+
+ down(&priv->adapter_sem);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_WARNING("exit - failed to send CARD_DISABLE command\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
+ if (err) {
+ IPW_DEBUG_WARNING("exit - card failed to change to DISABLED\n");
+ goto fail_up;
+ }
+
+ IPW_DEBUG_INFO("TODO: implement scan state machine\n");
+
+fail_up:
+ up(&priv->adapter_sem);
+ return err;
+}
+
+int ipw2100_set_scan_options(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = SET_SCAN_OPTIONS,
+ .host_command_sequence = 0,
+ .host_command_length = 8
+ };
+ int err;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ IPW_DEBUG_SCAN("setting scan options\n");
+
+ cmd.host_command_parameters[0] = 0;
+
+ if (!(priv->config & CFG_ASSOCIATE))
+ cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
+ if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled)
+ cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
+ if (priv->config & CFG_PASSIVE_SCAN)
+ cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
+
+ cmd.host_command_parameters[1] = priv->channel_mask;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
+ cmd.host_command_parameters[0]);
+
+ return err;
+}
+
+int ipw2100_start_scan(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = BROADCAST_SCAN,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ IPW_DEBUG_HC("START_SCAN\n");
+
+ cmd.host_command_parameters[0] = 0;
+
+ /* No scanning if in monitor mode */
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ return 1;
+
+ if (priv->status & STATUS_SCANNING) {
+ IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
+ return 0;
+ }
+
+ IPW_DEBUG_INFO("enter\n");
+
+ /* Not clearing here; doing so makes iwlist always return nothing...
+ *
+ * We should modify the table logic to use aging tables vs. clearing
+ * the table on each scan start.
+ */
+ IPW_DEBUG_SCAN("starting scan\n");
+
+ priv->status |= STATUS_SCANNING;
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ priv->status &= ~STATUS_SCANNING;
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return err;
+}
+
+static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
+{
+ unsigned long flags;
+ int rc = 0;
+ u32 lock;
+ u32 ord_len = sizeof(lock);
+
+ /* Quite if manually disabled. */
+ if (priv->status & STATUS_RF_KILL_SW) {
+ IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
+ "switch\n", priv->net_dev->name);
+ return 0;
+ }
+
+ /* If the interrupt is enabled, turn it off... */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+
+ /* Reset any fatal_error conditions */
+ ipw2100_reset_fatalerror(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ if (priv->status & STATUS_POWERED ||
+ (priv->status & STATUS_RESET_PENDING)) {
+ /* Power cycle the card ... */
+ if (ipw2100_power_cycle_adapter(priv)) {
+ IPW_DEBUG_WARNING("%s: Could not cycle adapter.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+ } else
+ priv->status |= STATUS_POWERED;
+
+ /* Load the firmeware, start the clocks, etc. */
+ if (ipw2100_start_adapter(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to start the firmware.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ ipw2100_initialize_ordinals(priv);
+
+ /* Determine capabilities of this particular HW configuration */
+ if (ipw2100_get_hw_features(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to determine HW features.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ lock = LOCK_NONE;
+ if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
+ IPW_DEBUG_ERROR("%s: Failed to clear ordinal lock.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ priv->status &= ~STATUS_SCANNING;
+
+ if (rf_kill_active(priv)) {
+ printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
+ priv->net_dev->name);
+
+ if (priv->stop_rf_kill) {
+ priv->stop_rf_kill = 0;
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+ }
+
+ deferred = 1;
+ }
+
+ /* Turn on the interrupt so that commands can be processed */
+ ipw2100_enable_interrupts(priv);
+
+ /* Send all of the commands that must be sent prior to
+ * HOST_COMPLETE */
+ if (ipw2100_adapter_setup(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to start the card.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ if (!deferred) {
+ /* Enable the adapter - sends HOST_COMPLETE */
+ if (ipw2100_enable_adapter(priv)) {
+ IPW_DEBUG_ERROR(
+ "%s: failed in call to enable adapter.\n",
+ priv->net_dev->name);
+ ipw2100_hw_stop_adapter(priv);
+ rc = 1;
+ goto exit;
+ }
+
+
+ /* Start a scan . . . */
+ ipw2100_set_scan_options(priv);
+ ipw2100_start_scan(priv);
+ }
+
+ exit:
+ return rc;
+}
+
+/* Called by register_netdev() */
+static int ipw2100_net_init(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ipw2100_up(priv, 1);
+}
+
+static void ipw2100_down(struct ipw2100_priv *priv)
+{
+ unsigned long flags;
+ union iwreq_data wrqu = {
+ .ap_addr = {
+ .sa_family = ARPHRD_ETHER
+ }
+ };
+ int associated = priv->status & STATUS_ASSOCIATED;
+
+ /* Kill the RF switch timer */
+ if (!priv->stop_rf_kill) {
+ priv->stop_rf_kill = 1;
+ cancel_delayed_work(&priv->rf_kill);
+ }
+
+ /* Kill the firmare hang check timer */
+ if (!priv->stop_hang_check) {
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+ }
+
+ /* Kill any pending resets */
+ if (priv->status & STATUS_RESET_PENDING)
+ cancel_delayed_work(&priv->reset_work);
+
+ /* Make sure the interrupt is on so that FW commands will be
+ * processed correctly */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_enable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ if (ipw2100_hw_stop_adapter(priv))
+ IPW_DEBUG_ERROR("%s: Error stopping adapter.\n",
+ priv->net_dev->name);
+
+ /* Do not disable the interrupt until _after_ we disable
+ * the adaptor. Otherwise the CARD_DISABLE command will never
+ * be ack'd by the firmware */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ if (priv->config & CFG_C3_DISABLED) {
+ IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+ acpi_set_cstate_limit(priv->cstate_limit);
+ priv->config &= ~CFG_C3_DISABLED;
+ }
+#endif
+
+ /* We have to signal any supplicant if we are disassociating */
+ if (associated)
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+}
+
+void ipw2100_reset_adapter(struct ipw2100_priv *priv)
+{
+ unsigned long flags;
+ union iwreq_data wrqu = {
+ .ap_addr = {
+ .sa_family = ARPHRD_ETHER
+ }
+ };
+ int associated = priv->status & STATUS_ASSOCIATED;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n",
+ priv->net_dev->name);
+ priv->resets++;
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+ priv->status |= STATUS_SECURITY_UPDATED;
+
+ /* Force a power cycle even if interface hasn't been opened
+ * yet */
+ cancel_delayed_work(&priv->reset_work);
+ priv->status |= STATUS_RESET_PENDING;
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ down(&priv->action_sem);
+ /* stop timed checks so that they don't interfere with reset */
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+
+ /* We have to signal any supplicant if we are disassociating */
+ if (associated)
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+ ipw2100_up(priv, 0);
+ up(&priv->action_sem);
+
+}
+
+
+static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
+{
+
+#define MAC_ASSOCIATION_READ_DELAY (HZ)
+ int ret, len, essid_len;
+ char essid[IW_ESSID_MAX_SIZE];
+ u32 txrate;
+ u32 chan;
+ char *txratename;
+ u8 bssid[ETH_ALEN];
+
+ /*
+ * TBD: BSSID is usually 00:00:00:00:00:00 here and not
+ * an actual MAC of the AP. Seems like FW sets this
+ * address too late. Read it later and expose through
+ * /proc or schedule a later task to query and update
+ */
+
+ essid_len = IW_ESSID_MAX_SIZE;
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
+ essid, &essid_len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+
+ len = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE,
+ &txrate, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+
+ len = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+ len = ETH_ALEN;
+ ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+ memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
+
+
+ switch (txrate) {
+ case TX_RATE_1_MBIT:
+ txratename = "1Mbps";
+ break;
+ case TX_RATE_2_MBIT:
+ txratename = "2Mbsp";
+ break;
+ case TX_RATE_5_5_MBIT:
+ txratename = "5.5Mbps";
+ break;
+ case TX_RATE_11_MBIT:
+ txratename = "11Mbps";
+ break;
+ default:
+ IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
+ txratename = "unknown rate";
+ break;
+ }
+
+ IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
+ MAC_FMT ")\n",
+ priv->net_dev->name, escape_essid(essid, essid_len),
+ txratename, chan, MAC_ARG(bssid));
+
+ /* now we copy read ssid into dev */
+ if (!(priv->config & CFG_STATIC_ESSID)) {
+ priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE);
+ memcpy(priv->essid, essid, priv->essid_len);
+ }
+ priv->channel = chan;
+ memcpy(priv->bssid, bssid, ETH_ALEN);
+
+ priv->status |= STATUS_ASSOCIATING;
+ priv->connect_start = get_seconds();
+
+ queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
+}
+
+
+int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
+ int length, int batch_mode)
+{
+ int ssid_len = min(length, IW_ESSID_MAX_SIZE);
+ struct host_command cmd = {
+ .host_command = SSID,
+ .host_command_sequence = 0,
+ .host_command_length = ssid_len
+ };
+ int err;
+
+ IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
+
+ if (ssid_len)
+ memcpy((char*)cmd.host_command_parameters,
+ essid, ssid_len);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
+ * disable auto association -- so we cheat by setting a bogus SSID */
+ if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
+ int i;
+ u8 *bogus = (u8*)cmd.host_command_parameters;
+ for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
+ bogus[i] = 0x18 + i;
+ cmd.host_command_length = IW_ESSID_MAX_SIZE;
+ }
+
+ /* NOTE: We always send the SSID command even if the provided ESSID is
+ * the same as what we currently think is set. */
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (!err) {
+ memset(priv->essid + ssid_len, 0,
+ IW_ESSID_MAX_SIZE - ssid_len);
+ memcpy(priv->essid, essid, ssid_len);
+ priv->essid_len = ssid_len;
+ }
+
+ if (!batch_mode) {
+ if (ipw2100_enable_adapter(priv))
+ err = -EIO;
+ }
+
+ return err;
+}
+
+static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "disassociated: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+ if (priv->status & STATUS_STOPPING) {
+ IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
+ return;
+ }
+
+ memset(priv->bssid, 0, ETH_ALEN);
+ memset(priv->ieee->bssid, 0, ETH_ALEN);
+
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+
+ if (!(priv->status & STATUS_RUNNING))
+ return;
+
+ if (priv->status & STATUS_SECURITY_UPDATED)
+ queue_work(priv->workqueue, &priv->security_work);
+
+ queue_work(priv->workqueue, &priv->wx_event_work);
+}
+
+static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
+ priv->net_dev->name);
+
+ /* RF_KILL is now enabled (else we wouldn't be here) */
+ priv->status |= STATUS_RF_KILL_HW;
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ if (priv->config & CFG_C3_DISABLED) {
+ IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+ acpi_set_cstate_limit(priv->cstate_limit);
+ priv->config &= ~CFG_C3_DISABLED;
+ }
+#endif
+
+ /* Make sure the RF Kill check timer is running */
+ priv->stop_rf_kill = 0;
+ cancel_delayed_work(&priv->rf_kill);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+}
+
+static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_SCAN("scan complete\n");
+ /* Age the scan results... */
+ priv->ieee->scans++;
+ priv->status &= ~STATUS_SCANNING;
+}
+
+#ifdef CONFIG_IPW_DEBUG
+#define IPW2100_HANDLER(v, f) { v, f, # v }
+struct ipw2100_status_indicator {
+ int status;
+ void (*cb)(struct ipw2100_priv *priv, u32 status);
+ char *name;
+};
+#else
+#define IPW2100_HANDLER(v, f) { v, f }
+struct ipw2100_status_indicator {
+ int status;
+ void (*cb)(struct ipw2100_priv *priv, u32 status);
+};
+#endif /* CONFIG_IPW_DEBUG */
+
+static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_SCAN("Scanning...\n");
+ priv->status |= STATUS_SCANNING;
+}
+
+const struct ipw2100_status_indicator status_handlers[] = {
+ IPW2100_HANDLER(IPW_STATE_INITIALIZED, 0),
+ IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, 0),
+ IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
+ IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
+ IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, 0),
+ IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
+ IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, 0),
+ IPW2100_HANDLER(IPW_STATE_LEFT_PSP, 0),
+ IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
+ IPW2100_HANDLER(IPW_STATE_DISABLED, 0),
+ IPW2100_HANDLER(IPW_STATE_POWER_DOWN, 0),
+ IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
+ IPW2100_HANDLER(-1, 0)
+};
+
+
+static void isr_status_change(struct ipw2100_priv *priv, int status)
+{
+ int i;
+
+ if (status == IPW_STATE_SCANNING &&
+ priv->status & STATUS_ASSOCIATED &&
+ !(priv->status & STATUS_SCANNING)) {
+ IPW_DEBUG_INFO("Scan detected while associated, with "
+ "no scan request. Restarting firmware.\n");
+
+ /* Wake up any sleeping jobs */
+ schedule_reset(priv);
+ }
+
+ for (i = 0; status_handlers[i].status != -1; i++) {
+ if (status == status_handlers[i].status) {
+ IPW_DEBUG_NOTIF("Status change: %s\n",
+ status_handlers[i].name);
+ if (status_handlers[i].cb)
+ status_handlers[i].cb(priv, status);
+ priv->wstats.status = status;
+ return;
+ }
+ }
+
+ IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
+}
+
+static void isr_rx_complete_command(
+ struct ipw2100_priv *priv,
+ struct ipw2100_cmd_header *cmd)
+{
+#ifdef CONFIG_IPW_DEBUG
+ if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
+ IPW_DEBUG_HC("Command completed '%s (%d)'\n",
+ command_types[cmd->host_command_reg],
+ cmd->host_command_reg);
+ }
+#endif
+ if (cmd->host_command_reg == HOST_COMPLETE)
+ priv->status |= STATUS_ENABLED;
+
+ if (cmd->host_command_reg == CARD_DISABLE)
+ priv->status &= ~STATUS_ENABLED;
+
+ priv->status &= ~STATUS_CMD_ACTIVE;
+
+ wake_up_interruptible(&priv->wait_command_queue);
+}
+
+#ifdef CONFIG_IPW_DEBUG
+const char *frame_types[] = {
+ "COMMAND_STATUS_VAL",
+ "STATUS_CHANGE_VAL",
+ "P80211_DATA_VAL",
+ "P8023_DATA_VAL",
+ "HOST_NOTIFICATION_VAL"
+};
+#endif
+
+
+static inline int ipw2100_alloc_skb(
+ struct ipw2100_priv *priv,
+ struct ipw2100_rx_packet *packet)
+{
+ packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
+ if (!packet->skb)
+ return -ENOMEM;
+
+ packet->rxp = (struct ipw2100_rx *)packet->skb->data;
+ packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+ /* NOTE: pci_map_single does not return an error code, and 0 is a valid
+ * dma_addr */
+
+ return 0;
+}
+
+
+#define SEARCH_ERROR 0xffffffff
+#define SEARCH_FAIL 0xfffffffe
+#define SEARCH_SUCCESS 0xfffffff0
+#define SEARCH_DISCARD 0
+#define SEARCH_SNAPSHOT 1
+
+#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
+static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
+{
+ int i;
+ if (priv->snapshot[0])
+ return 1;
+ for (i = 0; i < 0x30; i++) {
+ priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC);
+ if (!priv->snapshot[i]) {
+ IPW_DEBUG_INFO("%s: Error allocating snapshot "
+ "buffer %d\n", priv->net_dev->name, i);
+ while (i > 0)
+ kfree(priv->snapshot[--i]);
+ priv->snapshot[0] = NULL;
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv)
+{
+ int i;
+ if (!priv->snapshot[0])
+ return;
+ for (i = 0; i < 0x30; i++)
+ kfree(priv->snapshot[i]);
+ priv->snapshot[0] = NULL;
+}
+
+static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf,
+ size_t len, int mode)
+{
+ u32 i, j;
+ u32 tmp;
+ u8 *s, *d;
+ u32 ret;
+
+ s = in_buf;
+ if (mode == SEARCH_SNAPSHOT) {
+ if (!ipw2100_snapshot_alloc(priv))
+ mode = SEARCH_DISCARD;
+ }
+
+ for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
+ read_nic_dword(priv->net_dev, i, &tmp);
+ if (mode == SEARCH_SNAPSHOT)
+ *(u32 *)SNAPSHOT_ADDR(i) = tmp;
+ if (ret == SEARCH_FAIL) {
+ d = (u8*)&tmp;
+ for (j = 0; j < 4; j++) {
+ if (*s != *d) {
+ s = in_buf;
+ continue;
+ }
+
+ s++;
+ d++;
+
+ if ((s - in_buf) == len)
+ ret = (i + j) - len + 1;
+ }
+ } else if (mode == SEARCH_DISCARD)
+ return ret;
+ }
+
+ return ret;
+}
+
+/*
+ *
+ * 0) Disconnect the SKB from the firmware (just unmap)
+ * 1) Pack the ETH header into the SKB
+ * 2) Pass the SKB to the network stack
+ *
+ * When packet is provided by the firmware, it contains the following:
+ *
+ * . ieee80211_hdr
+ * . ieee80211_snap_hdr
+ *
+ * The size of the constructed ethernet
+ *
+ */
+#ifdef CONFIG_IPW2100_RX_DEBUG
+u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
+#endif
+
+static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv,
+ int i)
+{
+#ifdef CONFIG_IPW_DEBUG_C3
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ u32 match, reg;
+ int j;
+#endif
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ int limit;
+#endif
+
+ IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at "
+ "0x%04X.\n", i * sizeof(struct ipw2100_status));
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n");
+ limit = acpi_get_cstate_limit();
+ if (limit > 2) {
+ priv->cstate_limit = limit;
+ acpi_set_cstate_limit(2);
+ priv->config |= CFG_C3_DISABLED;
+ }
+#endif
+
+#ifdef CONFIG_IPW_DEBUG_C3
+ /* Halt the fimrware so we can get a good image */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+ j = 5;
+ do {
+ udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ } while (j--);
+
+ match = ipw2100_match_buf(priv, (u8*)status,
+ sizeof(struct ipw2100_status),
+ SEARCH_SNAPSHOT);
+ if (match < SEARCH_SUCCESS)
+ IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
+ "offset 0x%06X, length %d:\n",
+ priv->net_dev->name, match,
+ sizeof(struct ipw2100_status));
+ else
+ IPW_DEBUG_INFO("%s: No DMA status match in "
+ "Firmware.\n", priv->net_dev->name);
+
+ printk_buf((u8*)priv->status_queue.drv,
+ sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
+#endif
+
+ priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
+ priv->ieee->stats.rx_errors++;
+ schedule_reset(priv);
+}
+
+static inline void isr_rx(struct ipw2100_priv *priv, int i,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+ IPW_DEBUG_RX("Handler...\n");
+
+ if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
+ IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
+ " Dropping.\n",
+ priv->net_dev->name,
+ status->frame_size, skb_tailroom(packet->skb));
+ priv->ieee->stats.rx_errors++;
+ return;
+ }
+
+ if (unlikely(!netif_running(priv->net_dev))) {
+ priv->ieee->stats.rx_errors++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
+ return;
+ }
+
+ if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR &&
+ status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
+ IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
+ priv->ieee->stats.rx_errors++;
+ return;
+ }
+
+ if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
+ !(priv->status & STATUS_ASSOCIATED))) {
+ IPW_DEBUG_DROP("Dropping packet while not associated.\n");
+ priv->wstats.discard.misc++;
+ return;
+ }
+
+
+ pci_unmap_single(priv->pci_dev,
+ packet->dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+
+ skb_put(packet->skb, status->frame_size);
+
+#ifdef CONFIG_IPW2100_RX_DEBUG
+ /* Make a copy of the frame so we can dump it to the logs if
+ * ieee80211_rx fails */
+ memcpy(packet_data, packet->skb->data,
+ min(status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
+#endif
+
+ if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
+#ifdef CONFIG_IPW2100_RX_DEBUG
+ IPW_DEBUG_DROP("%s: Non consumed packet:\n",
+ priv->net_dev->name);
+ printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
+#endif
+ priv->ieee->stats.rx_errors++;
+
+ /* ieee80211_rx failed, so it didn't free the SKB */
+ dev_kfree_skb_any(packet->skb);
+ packet->skb = NULL;
+ }
+
+ /* We need to allocate a new SKB and attach it to the RDB. */
+ if (unlikely(ipw2100_alloc_skb(priv, packet))) {
+ IPW_DEBUG_WARNING(
+ "%s: Unable to allocate SKB onto RBD ring - disabling "
+ "adapter.\n", priv->net_dev->name);
+ /* TODO: schedule adapter shutdown */
+ IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
+ }
+
+ /* Update the RDB entry */
+ priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+}
+
+static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
+{
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
+ u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
+
+ switch (frame_type) {
+ case COMMAND_STATUS_VAL:
+ return (status->frame_size != sizeof(u->rx_data.command));
+ case STATUS_CHANGE_VAL:
+ return (status->frame_size != sizeof(u->rx_data.status));
+ case HOST_NOTIFICATION_VAL:
+ return (status->frame_size < sizeof(u->rx_data.notification));
+ case P80211_DATA_VAL:
+ case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+ return 0;
+#else
+ switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ case IEEE80211_FTYPE_CTL:
+ return 0;
+ case IEEE80211_FTYPE_DATA:
+ return (status->frame_size >
+ IPW_MAX_802_11_PAYLOAD_LENGTH);
+ }
+#endif
+ }
+
+ return 1;
+}
+
+/*
+ * ipw2100 interrupts are disabled at this point, and the ISR
+ * is the only code that calls this method. So, we do not need
+ * to play with any locks.
+ *
+ * RX Queue works as follows:
+ *
+ * Read index - firmware places packet in entry identified by the
+ * Read index and advances Read index. In this manner,
+ * Read index will always point to the next packet to
+ * be filled--but not yet valid.
+ *
+ * Write index - driver fills this entry with an unused RBD entry.
+ * This entry has not filled by the firmware yet.
+ *
+ * In between the W and R indexes are the RBDs that have been received
+ * but not yet processed.
+ *
+ * The process of handling packets will start at WRITE + 1 and advance
+ * until it reaches the READ index.
+ *
+ * The WRITE index is cached in the variable 'priv->rx_queue.next'.
+ *
+ */
+static inline void __ipw2100_rx_process(struct ipw2100_priv *priv)
+{
+ struct ipw2100_bd_queue *rxq = &priv->rx_queue;
+ struct ipw2100_status_queue *sq = &priv->status_queue;
+ struct ipw2100_rx_packet *packet;
+ u16 frame_type;
+ u32 r, w, i, s;
+ struct ipw2100_rx *u;
+ struct ieee80211_rx_stats stats = {
+ .mac_time = jiffies,
+ };
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
+
+ if (r >= rxq->entries) {
+ IPW_DEBUG_RX("exit - bad read index\n");
+ return;
+ }
+
+ i = (rxq->next + 1) % rxq->entries;
+ s = i;
+ while (i != r) {
+ /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
+ r, rxq->next, i); */
+
+ packet = &priv->rx_buffers[i];
+
+ /* Sync the DMA for the STATUS buffer so CPU is sure to get
+ * the correct values */
+ pci_dma_sync_single_for_cpu(
+ priv->pci_dev,
+ sq->nic + sizeof(struct ipw2100_status) * i,
+ sizeof(struct ipw2100_status),
+ PCI_DMA_FROMDEVICE);
+
+ /* Sync the DMA for the RX buffer so CPU is sure to get
+ * the correct values */
+ pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+
+ if (unlikely(ipw2100_corruption_check(priv, i))) {
+ ipw2100_corruption_detected(priv, i);
+ goto increment;
+ }
+
+ u = packet->rxp;
+ frame_type = sq->drv[i].status_fields &
+ STATUS_TYPE_MASK;
+ stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
+ stats.len = sq->drv[i].frame_size;
+
+ stats.mask = 0;
+ if (stats.rssi != 0)
+ stats.mask |= IEEE80211_STATMASK_RSSI;
+ stats.freq = IEEE80211_24GHZ_BAND;
+
+ IPW_DEBUG_RX(
+ "%s: '%s' frame type received (%d).\n",
+ priv->net_dev->name, frame_types[frame_type],
+ stats.len);
+
+ switch (frame_type) {
+ case COMMAND_STATUS_VAL:
+ /* Reset Rx watchdog */
+ isr_rx_complete_command(
+ priv, &u->rx_data.command);
+ break;
+
+ case STATUS_CHANGE_VAL:
+ isr_status_change(priv, u->rx_data.status);
+ break;
+
+ case P80211_DATA_VAL:
+ case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ isr_rx(priv, i, &stats);
+ break;
+ }
+#endif
+ if (stats.len < sizeof(u->rx_data.header))
+ break;
+ switch (WLAN_FC_GET_TYPE(u->rx_data.header.
+ frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ ieee80211_rx_mgt(priv->ieee,
+ &u->rx_data.header,
+ &stats);
+ break;
+
+ case IEEE80211_FTYPE_CTL:
+ break;
+
+ case IEEE80211_FTYPE_DATA:
+ isr_rx(priv, i, &stats);
+ break;
+
+ }
+ break;
+ }
+
+ increment:
+ /* clear status field associated with this RBD */
+ rxq->drv[i].status.info.field = 0;
+
+ i = (i + 1) % rxq->entries;
+ }
+
+ if (i != s) {
+ /* backtrack one entry, wrapping to end if at 0 */
+ rxq->next = (i ? i : rxq->entries) - 1;
+
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_RX_WRITE_INDEX,
+ rxq->next);
+ }
+}
+
+
+/*
+ * __ipw2100_tx_process
+ *
+ * This routine will determine whether the next packet on
+ * the fw_pend_list has been processed by the firmware yet.
+ *
+ * If not, then it does nothing and returns.
+ *
+ * If so, then it removes the item from the fw_pend_list, frees
+ * any associated storage, and places the item back on the
+ * free list of its source (either msg_free_list or tx_free_list)
+ *
+ * TX Queue works as follows:
+ *
+ * Read index - points to the next TBD that the firmware will
+ * process. The firmware will read the data, and once
+ * done processing, it will advance the Read index.
+ *
+ * Write index - driver fills this entry with an constructed TBD
+ * entry. The Write index is not advanced until the
+ * packet has been configured.
+ *
+ * In between the W and R indexes are the TBDs that have NOT been
+ * processed. Lagging behind the R index are packets that have
+ * been processed but have not been freed by the driver.
+ *
+ * In order to free old storage, an internal index will be maintained
+ * that points to the next packet to be freed. When all used
+ * packets have been freed, the oldest index will be the same as the
+ * firmware's read index.
+ *
+ * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
+ *
+ * Because the TBD structure can not contain arbitrary data, the
+ * driver must keep an internal queue of cached allocations such that
+ * it can put that data back into the tx_free_list and msg_free_list
+ * for use by future command and data packets.
+ *
+ */
+static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
+{
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ int descriptors_used;
+ int e, i;
+ u32 r, w, frag_num = 0;
+
+ if (list_empty(&priv->fw_pend_list))
+ return 0;
+
+ element = priv->fw_pend_list.next;
+
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+ tbd = &txq->drv[packet->index];
+
+ /* Determine how many TBD entries must be finished... */
+ switch (packet->type) {
+ case COMMAND:
+ /* COMMAND uses only one slot; don't advance */
+ descriptors_used = 1;
+ e = txq->oldest;
+ break;
+
+ case DATA:
+ /* DATA uses two slots; advance and loop position. */
+ descriptors_used = tbd->num_fragments;
+ frag_num = tbd->num_fragments - 1;
+ e = txq->oldest + frag_num;
+ e %= txq->entries;
+ break;
+
+ default:
+ IPW_DEBUG_WARNING("%s: Bad fw_pend_list entry!\n",
+ priv->net_dev->name);
+ return 0;
+ }
+
+ /* if the last TBD is not done by NIC yet, then packet is
+ * not ready to be released.
+ *
+ */
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+ &r);
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ &w);
+ if (w != txq->next)
+ IPW_DEBUG_WARNING("%s: write index mismatch\n",
+ priv->net_dev->name);
+
+ /*
+ * txq->next is the index of the last packet written txq->oldest is
+ * the index of the r is the index of the next packet to be read by
+ * firmware
+ */
+
+
+ /*
+ * Quick graphic to help you visualize the following
+ * if / else statement
+ *
+ * ===>| s---->|===============
+ * e>|
+ * | a | b | c | d | e | f | g | h | i | j | k | l
+ * r---->|
+ * w
+ *
+ * w - updated by driver
+ * r - updated by firmware
+ * s - start of oldest BD entry (txq->oldest)
+ * e - end of oldest BD entry
+ *
+ */
+ if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
+ IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
+ return 0;
+ }
+
+ list_del(element);
+ DEC_STAT(&priv->fw_pend_stat);
+
+#ifdef CONFIG_IPW_DEBUG
+ {
+ int i = txq->oldest;
+ IPW_DEBUG_TX(
+ "TX%d V=%p P=%p T=%p L=%d\n", i,
+ &txq->drv[i],
+ (void*)txq->nic + i * sizeof(struct ipw2100_bd),
+ (void*)txq->drv[i].host_addr,
+ txq->drv[i].buf_length);
+
+ if (packet->type == DATA) {
+ i = (i + 1) % txq->entries;
+
+ IPW_DEBUG_TX(
+ "TX%d V=%p P=%p T=%p L=%d\n", i,
+ &txq->drv[i],
+ (void*)txq->nic + i *
+ sizeof(struct ipw2100_bd),
+ (void*)txq->drv[i].host_addr,
+ txq->drv[i].buf_length);
+ }
+ }
+#endif
+
+ switch (packet->type) {
+ case DATA:
+ if (txq->drv[txq->oldest].status.info.fields.txType != 0)
+ IPW_DEBUG_WARNING("%s: Queue mismatch. "
+ "Expecting DATA TBD but pulled "
+ "something else: ids %d=%d.\n",
+ priv->net_dev->name, txq->oldest, packet->index);
+
+ /* DATA packet; we have to unmap and free the SKB */
+ priv->ieee->stats.tx_packets++;
+ for (i = 0; i < frag_num; i++) {
+ tbd = &txq->drv[(packet->index + 1 + i) %
+ txq->entries];
+
+ IPW_DEBUG_TX(
+ "TX%d P=%08x L=%d\n",
+ (packet->index + 1 + i) % txq->entries,
+ tbd->host_addr, tbd->buf_length);
+
+ pci_unmap_single(priv->pci_dev,
+ tbd->host_addr,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+ }
+
+ priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size;
+ ieee80211_txb_free(packet->info.d_struct.txb);
+ packet->info.d_struct.txb = NULL;
+
+ list_add_tail(element, &priv->tx_free_list);
+ INC_STAT(&priv->tx_free_stat);
+
+ /* We have a free slot in the Tx queue, so wake up the
+ * transmit layer if it is stopped. */
+ if (priv->status & STATUS_ASSOCIATED &&
+ netif_queue_stopped(priv->net_dev)) {
+ IPW_DEBUG_INFO(KERN_INFO
+ "%s: Waking net queue.\n",
+ priv->net_dev->name);
+ netif_wake_queue(priv->net_dev);
+ }
+
+ /* A packet was processed by the hardware, so update the
+ * watchdog */
+ priv->net_dev->trans_start = jiffies;
+
+ break;
+
+ case COMMAND:
+ if (txq->drv[txq->oldest].status.info.fields.txType != 1)
+ IPW_DEBUG_WARNING("%s: Queue mismatch. "
+ "Expecting COMMAND TBD but pulled "
+ "something else: ids %d=%d.\n",
+ priv->net_dev->name, txq->oldest, packet->index);
+
+#ifdef CONFIG_IPW_DEBUG
+ if (packet->info.c_struct.cmd->host_command_reg <
+ sizeof(command_types) / sizeof(*command_types))
+ IPW_DEBUG_TX(
+ "Command '%s (%d)' processed: %d.\n",
+ command_types[packet->info.c_struct.cmd->host_command_reg],
+ packet->info.c_struct.cmd->host_command_reg,
+ packet->info.c_struct.cmd->cmd_status_reg);
+#endif
+
+ list_add_tail(element, &priv->msg_free_list);
+ INC_STAT(&priv->msg_free_stat);
+ break;
+ }
+
+ /* advance oldest used TBD pointer to start of next entry */
+ txq->oldest = (e + 1) % txq->entries;
+ /* increase available TBDs number */
+ txq->available += descriptors_used;
+ SET_STAT(&priv->txq_stat, txq->available);
+
+ IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
+ jiffies - packet->jiffy_start);
+
+ return (!list_empty(&priv->fw_pend_list));
+}
+
+
+static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
+{
+ int i = 0;
+
+ while (__ipw2100_tx_process(priv) && i < 200) i++;
+
+ if (i == 200) {
+ IPW_DEBUG_WARNING(
+ "%s: Driver is running slow (%d iters).\n",
+ priv->net_dev->name, i);
+ }
+}
+
+
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ int next = txq->next;
+
+ while (!list_empty(&priv->msg_pend_list)) {
+ /* if there isn't enough space in TBD queue, then
+ * don't stuff a new one in.
+ * NOTE: 3 are needed as a command will take one,
+ * and there is a minimum of 2 that must be
+ * maintained between the r and w indexes
+ */
+ if (txq->available <= 3) {
+ IPW_DEBUG_TX("no room in tx_queue\n");
+ break;
+ }
+
+ element = priv->msg_pend_list.next;
+ list_del(element);
+ DEC_STAT(&priv->msg_pend_stat);
+
+ packet = list_entry(element,
+ struct ipw2100_tx_packet, list);
+
+ IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
+ &txq->drv[txq->next],
+ (void*)(txq->nic + txq->next *
+ sizeof(struct ipw2100_bd)));
+
+ packet->index = txq->next;
+
+ tbd = &txq->drv[txq->next];
+
+ /* initialize TBD */
+ tbd->host_addr = packet->info.c_struct.cmd_phys;
+ tbd->buf_length = sizeof(struct ipw2100_cmd_header);
+ /* not marking number of fragments causes problems
+ * with f/w debug version */
+ tbd->num_fragments = 1;
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_COMMAND |
+ IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+
+ /* update TBD queue counters */
+ txq->next++;
+ txq->next %= txq->entries;
+ txq->available--;
+ DEC_STAT(&priv->txq_stat);
+
+ list_add_tail(element, &priv->fw_pend_list);
+ INC_STAT(&priv->fw_pend_stat);
+ }
+
+ if (txq->next != next) {
+ /* kick off the DMA by notifying firmware the
+ * write index has moved; make sure TBD stores are sync'd */
+ wmb();
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ txq->next);
+ }
+}
+
+
+/*
+ * X__ipw2100_tx_send_data
+ *
+ */
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ int next = txq->next;
+ int i = 0;
+ struct ipw2100_data_header *ipw_hdr;
+ struct ieee80211_hdr *hdr;
+
+ while (!list_empty(&priv->tx_pend_list)) {
+ /* if there isn't enough space in TBD queue, then
+ * don't stuff a new one in.
+ * NOTE: 4 are needed as a data will take two,
+ * and there is a minimum of 2 that must be
+ * maintained between the r and w indexes
+ */
+ element = priv->tx_pend_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
+ IPW_MAX_BDS)) {
+ /* TODO: Support merging buffers if more than
+ * IPW_MAX_BDS are used */
+ IPW_DEBUG_INFO(
+ "%s: Maximum BD theshold exceeded. "
+ "Increase fragmentation level.\n",
+ priv->net_dev->name);
+ }
+
+ if (txq->available <= 3 +
+ packet->info.d_struct.txb->nr_frags) {
+ IPW_DEBUG_TX("no room in tx_queue\n");
+ break;
+ }
+
+ list_del(element);
+ DEC_STAT(&priv->tx_pend_stat);
+
+ tbd = &txq->drv[txq->next];
+
+ packet->index = txq->next;
+
+ ipw_hdr = packet->info.d_struct.data;
+ hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb->
+ fragments[0]->data;
+
+ if (priv->ieee->iw_mode == IW_MODE_INFRA) {
+ /* To DS: Addr1 = BSSID, Addr2 = SA,
+ Addr3 = DA */
+ memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
+ } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ /* not From/To DS: Addr1 = DA, Addr2 = SA,
+ Addr3 = BSSID */
+ memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
+ }
+
+ ipw_hdr->host_command_reg = SEND;
+ ipw_hdr->host_command_reg1 = 0;
+
+ /* For now we only support host based encryption */
+ ipw_hdr->needs_encryption = 0;
+ ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
+ if (packet->info.d_struct.txb->nr_frags > 1)
+ ipw_hdr->fragment_size =
+ packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN;
+ else
+ ipw_hdr->fragment_size = 0;
+
+ tbd->host_addr = packet->info.d_struct.data_phys;
+ tbd->buf_length = sizeof(struct ipw2100_data_header);
+ tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+ txq->next++;
+ txq->next %= txq->entries;
+
+ IPW_DEBUG_TX(
+ "data header tbd TX%d P=%08x L=%d\n",
+ packet->index, tbd->host_addr,
+ tbd->buf_length);
+#ifdef CONFIG_IPW_DEBUG
+ if (packet->info.d_struct.txb->nr_frags > 1)
+ IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
+ packet->info.d_struct.txb->nr_frags);
+#endif
+
+ for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
+ tbd = &txq->drv[txq->next];
+ if (i == packet->info.d_struct.txb->nr_frags - 1)
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+ else
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+
+ tbd->buf_length = packet->info.d_struct.txb->
+ fragments[i]->len - IEEE80211_3ADDR_LEN;
+
+ tbd->host_addr = pci_map_single(
+ priv->pci_dev,
+ packet->info.d_struct.txb->fragments[i]->data +
+ IEEE80211_3ADDR_LEN,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+
+ IPW_DEBUG_TX(
+ "data frag tbd TX%d P=%08x L=%d\n",
+ txq->next, tbd->host_addr, tbd->buf_length);
+
+ pci_dma_sync_single_for_device(
+ priv->pci_dev, tbd->host_addr,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+
+ txq->next++;
+ txq->next %= txq->entries;
+ }
+
+ txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
+ SET_STAT(&priv->txq_stat, txq->available);
+
+ list_add_tail(element, &priv->fw_pend_list);
+ INC_STAT(&priv->fw_pend_stat);
+ }
+
+ if (txq->next != next) {
+ /* kick off the DMA by notifying firmware the
+ * write index has moved; make sure TBD stores are sync'd */
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ txq->next);
+ }
+ return;
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
+{
+ struct net_device *dev = priv->net_dev;
+ unsigned long flags;
+ u32 inta, tmp;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+
+ read_register(dev, IPW_REG_INTA, &inta);
+
+ IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
+ (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+ priv->in_isr++;
+ priv->interrupts++;
+
+ /* We do not loop and keep polling for more interrupts as this
+ * is frowned upon and doesn't play nicely with other potentially
+ * chained IRQs */
+ IPW_DEBUG_ISR("INTA: 0x%08lX\n",
+ (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+ if (inta & IPW2100_INTA_FATAL_ERROR) {
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": Fatal interrupt. Scheduling firmware restart.\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR);
+
+ read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
+ IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
+ priv->net_dev->name, priv->fatal_error);
+
+ read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
+ IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
+ priv->net_dev->name, tmp);
+
+ /* Wake up any sleeping jobs */
+ schedule_reset(priv);
+ }
+
+ if (inta & IPW2100_INTA_PARITY_ERROR) {
+ IPW_DEBUG_ERROR("***** PARITY ERROR INTERRUPT !!!! \n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_PARITY_ERROR);
+ }
+
+ if (inta & IPW2100_INTA_RX_TRANSFER) {
+ IPW_DEBUG_ISR("RX interrupt\n");
+
+ priv->rx_interrupts++;
+
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_RX_TRANSFER);
+
+ __ipw2100_rx_process(priv);
+ __ipw2100_tx_complete(priv);
+ }
+
+ if (inta & IPW2100_INTA_TX_TRANSFER) {
+ IPW_DEBUG_ISR("TX interrupt\n");
+
+ priv->tx_interrupts++;
+
+ write_register(dev, IPW_REG_INTA,
+ IPW2100_INTA_TX_TRANSFER);
+
+ __ipw2100_tx_complete(priv);
+ X__ipw2100_tx_send_commands(priv);
+ X__ipw2100_tx_send_data(priv);
+ }
+
+ if (inta & IPW2100_INTA_TX_COMPLETE) {
+ IPW_DEBUG_ISR("TX complete\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_TX_COMPLETE);
+
+ __ipw2100_tx_complete(priv);
+ }
+
+ if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
+ /* ipw2100_handle_event(dev); */
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_EVENT_INTERRUPT);
+ }
+
+ if (inta & IPW2100_INTA_FW_INIT_DONE) {
+ IPW_DEBUG_ISR("FW init done interrupt\n");
+ priv->inta_other++;
+
+ read_register(dev, IPW_REG_INTA, &tmp);
+ if (tmp & (IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR)) {
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR);
+ }
+
+ write_register(dev, IPW_REG_INTA,
+ IPW2100_INTA_FW_INIT_DONE);
+ }
+
+ if (inta & IPW2100_INTA_STATUS_CHANGE) {
+ IPW_DEBUG_ISR("Status change interrupt\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_STATUS_CHANGE);
+ }
+
+ if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
+ IPW_DEBUG_ISR("slave host mode interrupt\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
+ }
+
+ priv->in_isr--;
+ ipw2100_enable_interrupts(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ IPW_DEBUG_ISR("exit\n");
+}
+
+
+static irqreturn_t ipw2100_interrupt(int irq, void *data,
+ struct pt_regs *regs)
+{
+ struct ipw2100_priv *priv = data;
+ u32 inta, inta_mask;
+
+ if (!data)
+ return IRQ_NONE;
+
+ spin_lock(&priv->low_lock);
+
+ /* We check to see if we should be ignoring interrupts before
+ * we touch the hardware. During ucode load if we try and handle
+ * an interrupt we can cause keyboard problems as well as cause
+ * the ucode to fail to initialize */
+ if (!(priv->status & STATUS_INT_ENABLED)) {
+ /* Shared IRQ */
+ goto none;
+ }
+
+ read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+ if (inta == 0xFFFFFFFF) {
+ /* Hardware disappeared */
+ IPW_DEBUG_WARNING("IRQ INTA == 0xFFFFFFFF\n");
+ goto none;
+ }
+
+ inta &= IPW_INTERRUPT_MASK;
+
+ if (!(inta & inta_mask)) {
+ /* Shared interrupt */
+ goto none;
+ }
+
+ /* We disable the hardware interrupt here just to prevent unneeded
+ * calls to be made. We disable this again within the actual
+ * work tasklet, so if another part of the code re-enables the
+ * interrupt, that is fine */
+ ipw2100_disable_interrupts(priv);
+
+ tasklet_schedule(&priv->irq_tasklet);
+ spin_unlock(&priv->low_lock);
+
+ return IRQ_HANDLED;
+ none:
+ spin_unlock(&priv->low_lock);
+ return IRQ_NONE;
+}
+
+static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ IPW_DEBUG_INFO("Can not transmit when not connected.\n");
+ priv->ieee->stats.tx_carrier_errors++;
+ netif_stop_queue(dev);
+ goto fail_unlock;
+ }
+
+ if (list_empty(&priv->tx_free_list))
+ goto fail_unlock;
+
+ element = priv->tx_free_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ packet->info.d_struct.txb = txb;
+
+ IPW_DEBUG_TX("Sending fragment (%d bytes):\n",
+ txb->fragments[0]->len);
+ printk_buf(IPW_DL_TX, txb->fragments[0]->data,
+ txb->fragments[0]->len);
+
+ packet->jiffy_start = jiffies;
+
+ list_del(element);
+ DEC_STAT(&priv->tx_free_stat);
+
+ list_add_tail(element, &priv->tx_pend_list);
+ INC_STAT(&priv->tx_pend_stat);
+
+ X__ipw2100_tx_send_data(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+ return 0;
+
+ fail_unlock:
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+ return 1;
+}
+
+
+static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+ void *v;
+ dma_addr_t p;
+
+ priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc(
+ IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
+ GFP_KERNEL);
+ if (!priv->msg_buffers) {
+ IPW_DEBUG_ERROR("%s: PCI alloc failed for msg "
+ "buffers.\n", priv->net_dev->name);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+ v = pci_alloc_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ &p);
+ if (!v) {
+ IPW_DEBUG_ERROR(
+ "%s: PCI alloc failed for msg "
+ "buffers.\n",
+ priv->net_dev->name);
+ err = -ENOMEM;
+ break;
+ }
+
+ memset(v, 0, sizeof(struct ipw2100_cmd_header));
+
+ priv->msg_buffers[i].type = COMMAND;
+ priv->msg_buffers[i].info.c_struct.cmd =
+ (struct ipw2100_cmd_header*)v;
+ priv->msg_buffers[i].info.c_struct.cmd_phys = p;
+ }
+
+ if (i == IPW_COMMAND_POOL_SIZE)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ priv->msg_buffers[j].info.c_struct.cmd,
+ priv->msg_buffers[j].info.c_struct.cmd_phys);
+ }
+
+ kfree(priv->msg_buffers);
+ priv->msg_buffers = NULL;
+
+ return err;
+}
+
+static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
+{
+ int i;
+
+ INIT_LIST_HEAD(&priv->msg_free_list);
+ INIT_LIST_HEAD(&priv->msg_pend_list);
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
+ list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
+ SET_STAT(&priv->msg_free_stat, i);
+
+ return 0;
+}
+
+static void ipw2100_msg_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ if (!priv->msg_buffers)
+ return;
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+ pci_free_consistent(priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ priv->msg_buffers[i].info.c_struct.cmd,
+ priv->msg_buffers[i].info.c_struct.cmd_phys);
+ }
+
+ kfree(priv->msg_buffers);
+ priv->msg_buffers = NULL;
+}
+
+static ssize_t show_pci(struct device *d, char *buf)
+{
+ struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
+ char *out = buf;
+ int i, j;
+ u32 val;
+
+ for (i = 0; i < 16; i++) {
+ out += sprintf(out, "[%08X] ", i * 16);
+ for (j = 0; j < 16; j += 4) {
+ pci_read_config_dword(pci_dev, i * 16 + j, &val);
+ out += sprintf(out, "%08X ", val);
+ }
+ out += sprintf(out, "\n");
+ }
+
+ return out - buf;
+}
+static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
+
+static ssize_t show_cfg(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->config);
+}
+static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
+
+static ssize_t show_status(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->status);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static ssize_t show_capability(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->capability);
+}
+static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
+
+
+#define IPW2100_REG(x) { IPW_ ##x, #x }
+const struct {
+ u32 addr;
+ const char *name;
+} hw_data[] = {
+ IPW2100_REG(REG_GP_CNTRL),
+ IPW2100_REG(REG_GPIO),
+ IPW2100_REG(REG_INTA),
+ IPW2100_REG(REG_INTA_MASK),
+ IPW2100_REG(REG_RESET_REG),
+};
+#define IPW2100_NIC(x, s) { x, #x, s }
+const struct {
+ u32 addr;
+ const char *name;
+ size_t size;
+} nic_data[] = {
+ IPW2100_NIC(IPW2100_CONTROL_REG, 2),
+ IPW2100_NIC(0x210014, 1),
+ IPW2100_NIC(0x210000, 1),
+};
+#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
+const struct {
+ u8 index;
+ const char *name;
+ const char *desc;
+} ord_data[] = {
+ IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_DIR_DATA, "successful Directed Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_DIR_DATA1, "successful Directed Tx's (MSDU) @ 1MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA2, "successful Directed Tx's (MSDU) @ 2MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA5_5, "successful Directed Tx's (MSDU) @ 5_5MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA11, "successful Directed Tx's (MSDU) @ 11MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA1, "successful Non_Directed Tx's (MSDU) @ 1MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA2, "successful Non_Directed Tx's (MSDU) @ 2MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA11, "successful Non_Directed Tx's (MSDU) @ 11MB"),
+ IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
+ IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
+ IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
+ IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
+ IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
+ IPW2100_ORD(STAT_TX_ASSN_RESP, "successful Association response Tx's"),
+ IPW2100_ORD(STAT_TX_REASSN, "successful Reassociation Tx's"),
+ IPW2100_ORD(STAT_TX_REASSN_RESP, "successful Reassociation response Tx's"),
+ IPW2100_ORD(STAT_TX_PROBE, "probes successfully transmitted"),
+ IPW2100_ORD(STAT_TX_PROBE_RESP, "probe responses successfully transmitted"),
+ IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
+ IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
+ IPW2100_ORD(STAT_TX_DISASSN, "successful Disassociation TX"),
+ IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
+ IPW2100_ORD(STAT_TX_DEAUTH, "successful Deauthentication TX"),
+ IPW2100_ORD(STAT_TX_TOTAL_BYTES, "Total successful Tx data bytes"),
+ IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
+ IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
+ IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
+ IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"),
+ IPW2100_ORD(STAT_TX_DISASSN_FAIL, "times disassociation failed"),
+ IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
+ IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
+ IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
+ IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
+ IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA5_5, "directed packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA1, "nondirected packets at 1MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA2, "nondirected packets at 2MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA5_5, "nondirected packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA11, "nondirected packets at 11MB"),
+ IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
+ IPW2100_ORD(STAT_RX_RTS, "Rx RTS"),
+ IPW2100_ORD(STAT_RX_CTS, "Rx CTS"),
+ IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
+ IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
+ IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
+ IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
+ IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
+ IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
+ IPW2100_ORD(STAT_RX_REASSN_RESP, "Reassociation response Rx's"),
+ IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
+ IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
+ IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
+ IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
+ IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
+ IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
+ IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
+ IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"),
+ IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
+ IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE2, "duplicate rx packets at 2MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE5_5, "duplicate rx packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE11, "duplicate rx packets at 11MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
+ IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
+ IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
+ IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
+ IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, "rx frames with invalid protocol"),
+ IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
+ IPW2100_ORD(STAT_RX_NO_BUFFER, "rx frames rejected due to no buffer"),
+ IPW2100_ORD(STAT_RX_MISSING_FRAG, "rx frames dropped due to missing fragment"),
+ IPW2100_ORD(STAT_RX_ORPHAN_FRAG, "rx frames dropped due to non-sequential fragment"),
+ IPW2100_ORD(STAT_RX_ORPHAN_FRAME, "rx frames dropped due to unmatched 1st frame"),
+ IPW2100_ORD(STAT_RX_FRAG_AGEOUT, "rx frames dropped due to uncompleted frame"),
+ IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"),
+ IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"),
+ IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
+ IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, "poll response timeouts"),
+ IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"),
+ IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
+ IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
+ IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"),
+ IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
+ IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"),
+ IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"),
+ IPW2100_ORD(ASSOCIATED_AP_PTR, "0 if not associated, else pointer to AP table entry"),
+ IPW2100_ORD(AVAILABLE_AP_CNT, "AP's decsribed in the AP table"),
+ IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
+ IPW2100_ORD(STAT_AP_ASSNS, "associations"),
+ IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
+ IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"),
+ IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
+ IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
+ IPW2100_ORD(STAT_ROAM_INHIBIT, "times roaming was inhibited due to activity"),
+ IPW2100_ORD(RSSI_AT_ASSN, "RSSI of associated AP at time of association"),
+ IPW2100_ORD(STAT_ASSN_CAUSE1, "reassociation: no probe response or TX on hop"),
+ IPW2100_ORD(STAT_ASSN_CAUSE2, "reassociation: poor tx/rx quality"),
+ IPW2100_ORD(STAT_ASSN_CAUSE3, "reassociation: tx/rx quality (excessive AP load"),
+ IPW2100_ORD(STAT_ASSN_CAUSE4, "reassociation: AP RSSI level"),
+ IPW2100_ORD(STAT_ASSN_CAUSE5, "reassociations due to load leveling"),
+ IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
+ IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"),
+ IPW2100_ORD(STATION_TABLE_CNT, "entries in association table"),
+ IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
+ IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
+ IPW2100_ORD(COUNTRY_CODE, "IEEE country code as recv'd from beacon"),
+ IPW2100_ORD(COUNTRY_CHANNELS, "channels suported by country"),
+ IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
+ IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
+ IPW2100_ORD(ANTENNA_DIVERSITY, "TRUE if antenna diversity is disabled"),
+ IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
+ IPW2100_ORD(OUR_FREQ, "current radio freq lower digits - channel ID"),
+ IPW2100_ORD(RTC_TIME, "current RTC time"),
+ IPW2100_ORD(PORT_TYPE, "operating mode"),
+ IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
+ IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
+ IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
+ IPW2100_ORD(BASIC_RATES, "basic tx rates"),
+ IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
+ IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
+ IPW2100_ORD(CAPABILITIES, "Management frame capability field"),
+ IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
+ IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
+ IPW2100_ORD(RTS_THRESHOLD, "Min packet length for RTS handshaking"),
+ IPW2100_ORD(INT_MODE, "International mode"),
+ IPW2100_ORD(FRAGMENTATION_THRESHOLD, "protocol frag threshold"),
+ IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"),
+ IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, "EEPROM size in SRAM"),
+ IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
+ IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, "EEPROM IBSS 11b channel set"),
+ IPW2100_ORD(MAC_VERSION, "MAC Version"),
+ IPW2100_ORD(MAC_REVISION, "MAC Revision"),
+ IPW2100_ORD(RADIO_VERSION, "Radio Version"),
+ IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
+ IPW2100_ORD(UCODE_VERSION, "Ucode Version"),
+};
+
+
+static ssize_t show_registers(struct device *d, char *buf)
+{
+ int i;
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char * out = buf;
+ u32 val = 0;
+
+ out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
+
+ for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
+ read_register(dev, hw_data[i].addr, &val);
+ out += sprintf(out, "%30s [%08X] : %08X\n",
+ hw_data[i].name, hw_data[i].addr, val);
+ }
+
+ return out - buf;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+
+static ssize_t show_hardware(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char * out = buf;
+ int i;
+
+ out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
+
+ for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
+ u8 tmp8;
+ u16 tmp16;
+ u32 tmp32;
+
+ switch (nic_data[i].size) {
+ case 1:
+ read_nic_byte(dev, nic_data[i].addr, &tmp8);
+ out += sprintf(out, "%30s [%08X] : %02X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp8);
+ break;
+ case 2:
+ read_nic_word(dev, nic_data[i].addr, &tmp16);
+ out += sprintf(out, "%30s [%08X] : %04X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp16);
+ break;
+ case 4:
+ read_nic_dword(dev, nic_data[i].addr, &tmp32);
+ out += sprintf(out, "%30s [%08X] : %08X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp32);
+ break;
+ }
+ }
+ return out - buf;
+}
+static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
+
+
+static ssize_t show_memory(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ static unsigned long loop = 0;
+ int len = 0;
+ u32 buffer[4];
+ int i;
+ char line[81];
+
+ if (loop >= 0x30000)
+ loop = 0;
+
+ /* sysfs provides us PAGE_SIZE buffer */
+ while (len < PAGE_SIZE - 128 && loop < 0x30000) {
+
+ if (priv->snapshot[0]) for (i = 0; i < 4; i++)
+ buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4);
+ else for (i = 0; i < 4; i++)
+ read_nic_dword(dev, loop + i * 4, &buffer[i]);
+
+ if (priv->dump_raw)
+ len += sprintf(buf + len,
+ "%c%c%c%c"
+ "%c%c%c%c"
+ "%c%c%c%c"
+ "%c%c%c%c",
+ ((u8*)buffer)[0x0],
+ ((u8*)buffer)[0x1],
+ ((u8*)buffer)[0x2],
+ ((u8*)buffer)[0x3],
+ ((u8*)buffer)[0x4],
+ ((u8*)buffer)[0x5],
+ ((u8*)buffer)[0x6],
+ ((u8*)buffer)[0x7],
+ ((u8*)buffer)[0x8],
+ ((u8*)buffer)[0x9],
+ ((u8*)buffer)[0xa],
+ ((u8*)buffer)[0xb],
+ ((u8*)buffer)[0xc],
+ ((u8*)buffer)[0xd],
+ ((u8*)buffer)[0xe],
+ ((u8*)buffer)[0xf]);
+ else
+ len += sprintf(buf + len, "%s\n",
+ snprint_line(line, sizeof(line),
+ (u8*)buffer, 16, loop));
+ loop += 16;
+ }
+
+ return len;
+}
+
+static ssize_t store_memory(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ const char *p = buf;
+
+ if (count < 1)
+ return count;
+
+ if (p[0] == '1' ||
+ (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
+ IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
+ dev->name);
+ priv->dump_raw = 1;
+
+ } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
+ tolower(p[1]) == 'f')) {
+ IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
+ dev->name);
+ priv->dump_raw = 0;
+
+ } else if (tolower(p[0]) == 'r') {
+ IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n",
+ dev->name);
+ ipw2100_snapshot_free(priv);
+
+ } else
+ IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
+ "reset = clear memory snapshot\n",
+ dev->name);
+
+ return count;
+}
+static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory);
+
+
+static ssize_t show_ordinals(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ u32 val = 0;
+ int len = 0;
+ u32 val_len;
+ static int loop = 0;
+
+ if (loop >= sizeof(ord_data) / sizeof(*ord_data))
+ loop = 0;
+
+ /* sysfs provides us PAGE_SIZE buffer */
+ while (len < PAGE_SIZE - 128 &&
+ loop < (sizeof(ord_data) / sizeof(*ord_data))) {
+
+ val_len = sizeof(u32);
+
+ if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
+ &val_len))
+ len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
+ ord_data[loop].index,
+ ord_data[loop].desc);
+ else
+ len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
+ ord_data[loop].index, val,
+ ord_data[loop].desc);
+ loop++;
+ }
+
+ return len;
+}
+static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
+
+
+static ssize_t show_stats(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char * out = buf;
+
+ out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
+ priv->interrupts, priv->tx_interrupts,
+ priv->rx_interrupts, priv->inta_other);
+ out += sprintf(out, "firmware resets: %d\n", priv->resets);
+ out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
+#ifdef CONFIG_IPW_DEBUG
+ out += sprintf(out, "packet mismatch image: %s\n",
+ priv->snapshot[0] ? "YES" : "NO");
+#endif
+
+ return out - buf;
+}
+static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
+
+
+int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
+{
+ int err;
+
+ if (mode == priv->ieee->iw_mode)
+ return 0;
+
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+
+ switch (mode) {
+ case IW_MODE_INFRA:
+ priv->net_dev->type = ARPHRD_ETHER;
+ break;
+ case IW_MODE_ADHOC:
+ priv->net_dev->type = ARPHRD_ETHER;
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ priv->last_mode = priv->ieee->iw_mode;
+ priv->net_dev->type = ARPHRD_IEEE80211;
+ break;
+#endif /* CONFIG_IPW2100_MONITOR */
+ }
+
+ priv->ieee->iw_mode = mode;
+
+#ifdef CONFIG_PM
+ /* Indicate ipw2100_download_firmware download firmware
+ * from disk instead of memory. */
+ ipw2100_firmware.version = 0;
+#endif
+
+ printk(KERN_INFO "%s: Reseting on mode change.\n",
+ priv->net_dev->name);
+ priv->reset_backoff = 0;
+ schedule_reset(priv);
+
+ return 0;
+}
+
+static ssize_t show_internals(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ int len = 0;
+
+#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x)
+
+ if (priv->status & STATUS_ASSOCIATED)
+ len += sprintf(buf + len, "connected: %lu\n",
+ get_seconds() - priv->connect_start);
+ else
+ len += sprintf(buf + len, "not connected\n");
+
+ DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p);
+ DUMP_VAR(status, 08lx);
+ DUMP_VAR(config, 08lx);
+ DUMP_VAR(capability, 08lx);
+
+ len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc);
+
+ DUMP_VAR(fatal_error, d);
+ DUMP_VAR(stop_hang_check, d);
+ DUMP_VAR(stop_rf_kill, d);
+ DUMP_VAR(messages_sent, d);
+
+ DUMP_VAR(tx_pend_stat.value, d);
+ DUMP_VAR(tx_pend_stat.hi, d);
+
+ DUMP_VAR(tx_free_stat.value, d);
+ DUMP_VAR(tx_free_stat.lo, d);
+
+ DUMP_VAR(msg_free_stat.value, d);
+ DUMP_VAR(msg_free_stat.lo, d);
+
+ DUMP_VAR(msg_pend_stat.value, d);
+ DUMP_VAR(msg_pend_stat.hi, d);
+
+ DUMP_VAR(fw_pend_stat.value, d);
+ DUMP_VAR(fw_pend_stat.hi, d);
+
+ DUMP_VAR(txq_stat.value, d);
+ DUMP_VAR(txq_stat.lo, d);
+
+ DUMP_VAR(ieee->scans, d);
+ DUMP_VAR(reset_backoff, d);
+
+ return len;
+}
+static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
+
+
+static ssize_t show_bssinfo(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char essid[IW_ESSID_MAX_SIZE + 1];
+ u8 bssid[ETH_ALEN];
+ u32 chan = 0;
+ char * out = buf;
+ int length;
+ int ret;
+
+ memset(essid, 0, sizeof(essid));
+ memset(bssid, 0, sizeof(bssid));
+
+ length = IW_ESSID_MAX_SIZE;
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ length = sizeof(bssid);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+ bssid, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ length = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ out += sprintf(out, "ESSID: %s\n", essid);
+ out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ bssid[0], bssid[1], bssid[2],
+ bssid[3], bssid[4], bssid[5]);
+ out += sprintf(out, "Channel: %d\n", chan);
+
+ return out - buf;
+}
+static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
+
+
+
+
+#ifdef CONFIG_IPW_DEBUG
+static ssize_t show_debug_level(struct device_driver *d, char *buf)
+{
+ return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
+}
+
+static ssize_t store_debug_level(struct device_driver *d, const char *buf,
+ size_t count)
+{
+ char *p = (char *)buf;
+ u32 val;
+
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buf)
+ IPW_DEBUG_INFO(DRV_NAME
+ ": %s is not in hex or decimal form.\n", buf);
+ else
+ ipw2100_debug_level = val;
+
+ return strnlen(buf, count);
+}
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
+ store_debug_level);
+#endif /* CONFIG_IPW_DEBUG */
+
+
+static ssize_t show_fatal_error(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char *out = buf;
+ int i;
+
+ if (priv->fatal_error)
+ out += sprintf(out, "0x%08X\n",
+ priv->fatal_error);
+ else
+ out += sprintf(out, "0\n");
+
+ for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
+ if (!priv->fatal_errors[(priv->fatal_index - i) %
+ IPW2100_ERROR_QUEUE])
+ continue;
+
+ out += sprintf(out, "%d. 0x%08X\n", i,
+ priv->fatal_errors[(priv->fatal_index - i) %
+ IPW2100_ERROR_QUEUE]);
+ }
+
+ return out - buf;
+}
+
+static ssize_t store_fatal_error(struct device *d, const char *buf,
+ size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ schedule_reset(priv);
+ return count;
+}
+static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error);
+
+
+static ssize_t show_scan_age(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "%d\n", priv->ieee->scan_age);
+}
+
+static ssize_t store_scan_age(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char buffer[] = "00000000";
+ unsigned long len =
+ (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
+ unsigned long val;
+ char *p = buffer;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ strncpy(buffer, buf, len);
+ buffer[len] = 0;
+
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buffer) {
+ IPW_DEBUG_INFO("%s: user supplied invalid value.\n",
+ dev->name);
+ } else {
+ priv->ieee->scan_age = val;
+ IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+ return len;
+}
+static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
+
+
+static ssize_t show_rf_kill(struct device *d, char *buf)
+{
+ /* 0 - RF kill not enabled
+ 1 - SW based RF kill active (sysfs)
+ 2 - HW based RF kill active
+ 3 - Both HW and SW baed RF kill active */
+ struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+ int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
+ (rf_kill_active(priv) ? 0x2 : 0x0);
+ return sprintf(buf, "%i\n", val);
+}
+
+static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
+{
+ if ((disable_radio ? 1 : 0) ==
+ (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
+ return 0 ;
+
+ IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
+ disable_radio ? "OFF" : "ON");
+
+ down(&priv->action_sem);
+
+ if (disable_radio) {
+ priv->status |= STATUS_RF_KILL_SW;
+ ipw2100_down(priv);
+ } else {
+ priv->status &= ~STATUS_RF_KILL_SW;
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("Can not turn radio back on - "
+ "disabled by HW switch\n");
+ /* Make sure the RF_KILL check timer is running */
+ priv->stop_rf_kill = 0;
+ cancel_delayed_work(&priv->rf_kill);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill,
+ HZ);
+ } else
+ schedule_reset(priv);
+ }
+
+ up(&priv->action_sem);
+ return 1;
+}
+
+static ssize_t store_rf_kill(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ ipw_radio_kill_sw(priv, buf[0] == '1');
+ return count;
+}
+static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill);
+
+
+static struct attribute *ipw2100_sysfs_entries[] = {
+ &dev_attr_hardware.attr,
+ &dev_attr_registers.attr,
+ &dev_attr_ordinals.attr,
+ &dev_attr_pci.attr,
+ &dev_attr_stats.attr,
+ &dev_attr_internals.attr,
+ &dev_attr_bssinfo.attr,
+ &dev_attr_memory.attr,
+ &dev_attr_scan_age.attr,
+ &dev_attr_fatal_error.attr,
+ &dev_attr_rf_kill.attr,
+ &dev_attr_cfg.attr,
+ &dev_attr_status.attr,
+ &dev_attr_capability.attr,
+ NULL,
+};
+
+static struct attribute_group ipw2100_attribute_group = {
+ .attrs = ipw2100_sysfs_entries,
+};
+
+
+static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
+{
+ struct ipw2100_status_queue *q = &priv->status_queue;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ q->size = entries * sizeof(struct ipw2100_status);
+ q->drv = (struct ipw2100_status *)pci_alloc_consistent(
+ priv->pci_dev, q->size, &q->nic);
+ if (!q->drv) {
+ IPW_DEBUG_WARNING(
+ "Can not allocate status queue.\n");
+ return -ENOMEM;
+ }
+
+ memset(q->drv, 0, q->size);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static void status_queue_free(struct ipw2100_priv *priv)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->status_queue.drv) {
+ pci_free_consistent(
+ priv->pci_dev, priv->status_queue.size,
+ priv->status_queue.drv, priv->status_queue.nic);
+ priv->status_queue.drv = NULL;
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static int bd_queue_allocate(struct ipw2100_priv *priv,
+ struct ipw2100_bd_queue *q, int entries)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ memset(q, 0, sizeof(struct ipw2100_bd_queue));
+
+ q->entries = entries;
+ q->size = entries * sizeof(struct ipw2100_bd);
+ q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
+ if (!q->drv) {
+ IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n");
+ return -ENOMEM;
+ }
+ memset(q->drv, 0, q->size);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static void bd_queue_free(struct ipw2100_priv *priv,
+ struct ipw2100_bd_queue *q)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ if (!q)
+ return;
+
+ if (q->drv) {
+ pci_free_consistent(priv->pci_dev,
+ q->size, q->drv, q->nic);
+ q->drv = NULL;
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void bd_queue_initialize(
+ struct ipw2100_priv *priv, struct ipw2100_bd_queue * q,
+ u32 base, u32 size, u32 r, u32 w)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, q->nic);
+
+ write_register(priv->net_dev, base, q->nic);
+ write_register(priv->net_dev, size, q->entries);
+ write_register(priv->net_dev, r, q->oldest);
+ write_register(priv->net_dev, w, q->next);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
+{
+ if (priv->workqueue) {
+ priv->stop_rf_kill = 1;
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->reset_work);
+ cancel_delayed_work(&priv->security_work);
+ cancel_delayed_work(&priv->wx_event_work);
+ cancel_delayed_work(&priv->hang_check);
+ cancel_delayed_work(&priv->rf_kill);
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
+ }
+}
+
+static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+ void *v;
+ dma_addr_t p;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
+ priv->net_dev->name);
+ return err;
+ }
+
+ priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc(
+ TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
+ GFP_ATOMIC);
+ if (!priv->tx_buffers) {
+ IPW_DEBUG_ERROR("%s: alloc failed form tx buffers.\n",
+ priv->net_dev->name);
+ bd_queue_free(priv, &priv->tx_queue);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ v = pci_alloc_consistent(
+ priv->pci_dev, sizeof(struct ipw2100_data_header), &p);
+ if (!v) {
+ IPW_DEBUG_ERROR("%s: PCI alloc failed for tx "
+ "buffers.\n", priv->net_dev->name);
+ err = -ENOMEM;
+ break;
+ }
+
+ priv->tx_buffers[i].type = DATA;
+ priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v;
+ priv->tx_buffers[i].info.d_struct.data_phys = p;
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+
+ if (i == TX_PENDED_QUEUE_LENGTH)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_data_header),
+ priv->tx_buffers[j].info.d_struct.data,
+ priv->tx_buffers[j].info.d_struct.data_phys);
+ }
+
+ kfree(priv->tx_buffers);
+ priv->tx_buffers = NULL;
+
+ return err;
+}
+
+static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ /*
+ * reinitialize packet info lists
+ */
+ INIT_LIST_HEAD(&priv->fw_pend_list);
+ INIT_STAT(&priv->fw_pend_stat);
+
+ /*
+ * reinitialize lists
+ */
+ INIT_LIST_HEAD(&priv->tx_pend_list);
+ INIT_LIST_HEAD(&priv->tx_free_list);
+ INIT_STAT(&priv->tx_pend_stat);
+ INIT_STAT(&priv->tx_free_stat);
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ /* We simply drop any SKBs that have been queued for
+ * transmit */
+ if (priv->tx_buffers[i].info.d_struct.txb) {
+ ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+
+ list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
+ }
+
+ SET_STAT(&priv->tx_free_stat, i);
+
+ priv->tx_queue.oldest = 0;
+ priv->tx_queue.available = priv->tx_queue.entries;
+ priv->tx_queue.next = 0;
+ INIT_STAT(&priv->txq_stat);
+ SET_STAT(&priv->txq_stat, priv->tx_queue.available);
+
+ bd_queue_initialize(priv, &priv->tx_queue,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
+
+ IPW_DEBUG_INFO("exit\n");
+
+}
+
+static void ipw2100_tx_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ bd_queue_free(priv, &priv->tx_queue);
+
+ if (!priv->tx_buffers)
+ return;
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ if (priv->tx_buffers[i].info.d_struct.txb) {
+ ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+ if (priv->tx_buffers[i].info.d_struct.data)
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_data_header),
+ priv->tx_buffers[i].info.d_struct.data,
+ priv->tx_buffers[i].info.d_struct.data_phys);
+ }
+
+ kfree(priv->tx_buffers);
+ priv->tx_buffers = NULL;
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+
+
+static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_INFO("failed bd_queue_allocate\n");
+ return err;
+ }
+
+ err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_INFO("failed status_queue_allocate\n");
+ bd_queue_free(priv, &priv->rx_queue);
+ return err;
+ }
+
+ /*
+ * allocate packets
+ */
+ priv->rx_buffers = (struct ipw2100_rx_packet *)
+ kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
+ GFP_KERNEL);
+ if (!priv->rx_buffers) {
+ IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
+
+ bd_queue_free(priv, &priv->rx_queue);
+
+ status_queue_free(priv);
+
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+ struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+ err = ipw2100_alloc_skb(priv, packet);
+ if (unlikely(err)) {
+ err = -ENOMEM;
+ break;
+ }
+
+ /* The BD holds the cache aligned address */
+ priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+ priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
+ priv->status_queue.drv[i].status_fields = 0;
+ }
+
+ if (i == RX_QUEUE_LENGTH)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
+ sizeof(struct ipw2100_rx_packet),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(priv->rx_buffers[j].skb);
+ }
+
+ kfree(priv->rx_buffers);
+ priv->rx_buffers = NULL;
+
+ bd_queue_free(priv, &priv->rx_queue);
+
+ status_queue_free(priv);
+
+ return err;
+}
+
+static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ priv->rx_queue.oldest = 0;
+ priv->rx_queue.available = priv->rx_queue.entries - 1;
+ priv->rx_queue.next = priv->rx_queue.entries - 1;
+
+ INIT_STAT(&priv->rxq_stat);
+ SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
+
+ bd_queue_initialize(priv, &priv->rx_queue,
+ IPW_MEM_HOST_SHARED_RX_BD_BASE,
+ IPW_MEM_HOST_SHARED_RX_BD_SIZE,
+ IPW_MEM_HOST_SHARED_RX_READ_INDEX,
+ IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
+
+ /* set up the status queue */
+ write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
+ priv->status_queue.nic);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_rx_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ bd_queue_free(priv, &priv->rx_queue);
+ status_queue_free(priv);
+
+ if (!priv->rx_buffers)
+ return;
+
+ for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+ if (priv->rx_buffers[i].rxp) {
+ pci_unmap_single(priv->pci_dev,
+ priv->rx_buffers[i].dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(priv->rx_buffers[i].skb);
+ }
+ }
+
+ kfree(priv->rx_buffers);
+ priv->rx_buffers = NULL;
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
+{
+ u32 length = ETH_ALEN;
+ u8 mac[ETH_ALEN];
+
+ int err;
+
+ err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC,
+ mac, &length);
+ if (err) {
+ IPW_DEBUG_INFO("MAC address read failed\n");
+ return -EIO;
+ }
+ IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+
+ memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
+
+ return 0;
+}
+
+/********************************************************************
+ *
+ * Firmware Commands
+ *
+ ********************************************************************/
+
+int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = ADAPTER_ADDRESS,
+ .host_command_sequence = 0,
+ .host_command_length = ETH_ALEN
+ };
+ int err;
+
+ IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->config & CFG_CUSTOM_MAC) {
+ memcpy(cmd.host_command_parameters, priv->mac_addr,
+ ETH_ALEN);
+ memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+ } else
+ memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
+ ETH_ALEN);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ IPW_DEBUG_INFO("exit\n");
+ return err;
+}
+
+int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = PORT_TYPE,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(u32)
+ };
+ int err;
+
+ switch (port_type) {
+ case IW_MODE_INFRA:
+ cmd.host_command_parameters[0] = IPW_BSS;
+ break;
+ case IW_MODE_ADHOC:
+ cmd.host_command_parameters[0] = IPW_IBSS;
+ break;
+ }
+
+ IPW_DEBUG_HC("PORT_TYPE: %s\n",
+ port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+
+int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = CHANNEL,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(u32)
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = channel;
+
+ IPW_DEBUG_HC("CHANNEL: %d\n", channel);
+
+ /* If BSS then we don't support channel selection */
+ if (priv->ieee->iw_mode == IW_MODE_INFRA)
+ return 0;
+
+ if ((channel != 0) &&
+ ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
+ return -EINVAL;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_INFO("Failed to set channel to %d",
+ channel);
+ return err;
+ }
+
+ if (channel)
+ priv->config |= CFG_STATIC_CHANNEL;
+ else
+ priv->config &= ~CFG_STATIC_CHANNEL;
+
+ priv->channel = channel;
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SYSTEM_CONFIG,
+ .host_command_sequence = 0,
+ .host_command_length = 12,
+ };
+ u32 ibss_mask, len = sizeof(u32);
+ int err;
+
+ /* Set system configuration */
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+ cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
+
+ cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
+ IPW_CFG_BSS_MASK |
+ IPW_CFG_802_1x_ENABLE;
+
+ if (!(priv->config & CFG_LONG_PREAMBLE))
+ cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
+
+ err = ipw2100_get_ordinal(priv,
+ IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
+ &ibss_mask, &len);
+ if (err)
+ ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
+
+ cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
+ cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
+
+ /* 11b only */
+ /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+/* If IPv6 is configured in the kernel then we don't want to filter out all
+ * of the multicast packets as IPv6 needs some. */
+#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
+ cmd.host_command = ADD_MULTICAST;
+ cmd.host_command_sequence = 0;
+ cmd.host_command_length = 0;
+
+ ipw2100_hw_send_command(priv, &cmd);
+#endif
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = BASIC_TX_RATES,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ /* Set BASIC TX Rate first */
+ ipw2100_hw_send_command(priv, &cmd);
+
+ /* Set TX Rate */
+ cmd.host_command = TX_RATES;
+ ipw2100_hw_send_command(priv, &cmd);
+
+ /* Set MSDU TX Rate */
+ cmd.host_command = MSDU_TX_RATES;
+ ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ priv->tx_rates = rate;
+
+ return 0;
+}
+
+int ipw2100_set_power_mode(struct ipw2100_priv *priv,
+ int power_level)
+{
+ struct host_command cmd = {
+ .host_command = POWER_MODE,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = power_level;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ if (power_level == IPW_POWER_MODE_CAM)
+ priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+ else
+ priv->power_mode = IPW_POWER_ENABLED | power_level;
+
+#ifdef CONFIG_IPW2100_TX_POWER
+ if (priv->port_type == IBSS &&
+ priv->adhoc_power != DFTL_IBSS_TX_POWER) {
+ /* Set beacon interval */
+ cmd.host_command = TX_POWER_INDEX;
+ cmd.host_command_parameters[0] = (u32)priv->adhoc_power;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+ }
+#endif
+
+ return 0;
+}
+
+
+int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
+{
+ struct host_command cmd = {
+ .host_command = RTS_THRESHOLD,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ if (threshold & RTS_DISABLED)
+ cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
+ else
+ cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->rts_threshold = threshold;
+
+ return 0;
+}
+
+#if 0
+int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
+ u32 threshold, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = FRAG_THRESHOLD,
+ .host_command_sequence = 0,
+ .host_command_length = 4,
+ .host_command_parameters[0] = 0,
+ };
+ int err;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (threshold == 0)
+ threshold = DEFAULT_FRAG_THRESHOLD;
+ else {
+ threshold = max(threshold, MIN_FRAG_THRESHOLD);
+ threshold = min(threshold, MAX_FRAG_THRESHOLD);
+ }
+
+ cmd.host_command_parameters[0] = threshold;
+
+ IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ if (!err)
+ priv->frag_threshold = threshold;
+
+ return err;
+}
+#endif
+
+int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
+{
+ struct host_command cmd = {
+ .host_command = SHORT_RETRY_LIMIT,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = retry;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->short_retry_limit = retry;
+
+ return 0;
+}
+
+int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
+{
+ struct host_command cmd = {
+ .host_command = LONG_RETRY_LIMIT,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = retry;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->long_retry_limit = retry;
+
+ return 0;
+}
+
+
+int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = MANDATORY_BSSID,
+ .host_command_sequence = 0,
+ .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
+ };
+ int err;
+
+#ifdef CONFIG_IPW_DEBUG
+ if (bssid != NULL)
+ IPW_DEBUG_HC(
+ "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
+ bssid[5]);
+ else
+ IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
+#endif
+ /* if BSSID is empty then we disable mandatory bssid mode */
+ if (bssid != NULL)
+ memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+#ifdef CONFIG_IEEE80211_WPA
+static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = DISASSOCIATION_BSSID,
+ .host_command_sequence = 0,
+ .host_command_length = ETH_ALEN
+ };
+ int err;
+ int len;
+
+ IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
+
+ len = ETH_ALEN;
+ /* The Firmware currently ignores the BSSID and just disassociates from
+ * the currently associated AP -- but in the off chance that a future
+ * firmware does use the BSSID provided here, we go ahead and try and
+ * set it to the currently associated AP's BSSID */
+ memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ return err;
+}
+#endif
+
+/*
+ * Pseudo code for setting up wpa_frame:
+ */
+#if 0
+void x(struct ieee80211_assoc_frame *wpa_assoc)
+{
+ struct ipw2100_wpa_assoc_frame frame;
+ frame->fixed_ie_mask = IPW_WPA_CAPABILTIES |
+ IPW_WPA_LISTENINTERVAL |
+ IPW_WPA_AP_ADDRESS;
+ frame->capab_info = wpa_assoc->capab_info;
+ frame->lisen_interval = wpa_assoc->listent_interval;
+ memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN);
+
+ /* UNKNOWN -- I'm not postivive about this part; don't have any WPA
+ * setup here to test it with.
+ *
+ * Walk the IEs in the wpa_assoc and figure out the total size of all
+ * that data. Stick that into frame->var_ie_len. Then memcpy() all of
+ * the IEs from wpa_frame into frame.
+ */
+ frame->var_ie_len = calculate_ie_len(wpa_assoc);
+ memcpy(frame->var_ie, wpa_assoc->variable, frame->var_ie_len);
+
+ ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+#endif
+
+
+
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
+ struct ipw2100_wpa_assoc_frame *, int)
+__attribute__ ((unused));
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
+ struct ipw2100_wpa_assoc_frame *wpa_frame,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SET_WPA_IE,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
+ };
+ int err;
+
+ IPW_DEBUG_HC("SET_WPA_IE\n");
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ memcpy(cmd.host_command_parameters, wpa_frame,
+ sizeof(struct ipw2100_wpa_assoc_frame));
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ if (ipw2100_enable_adapter(priv))
+ err = -EIO;
+ }
+
+ return err;
+}
+
+struct security_info_params {
+ u32 allowed_ciphers;
+ u16 version;
+ u8 auth_mode;
+ u8 replay_counters_number;
+ u8 unicast_using_group;
+} __attribute__ ((packed));
+
+int ipw2100_set_security_information(struct ipw2100_priv *priv,
+ int auth_mode,
+ int security_level,
+ int unicast_using_group,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SET_SECURITY_INFORMATION,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct security_info_params)
+ };
+ struct security_info_params *security =
+ (struct security_info_params *)&cmd.host_command_parameters;
+ int err;
+ memset(security, 0, sizeof(*security));
+
+ /* If shared key AP authentication is turned on, then we need to
+ * configure the firmware to try and use it.
+ *
+ * Actual data encryption/decryption is handled by the host. */
+ security->auth_mode = auth_mode;
+ security->unicast_using_group = unicast_using_group;
+
+ switch (security_level) {
+ default:
+ case SEC_LEVEL_0:
+ security->allowed_ciphers = IPW_NONE_CIPHER;
+ break;
+ case SEC_LEVEL_1:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER;
+ break;
+ case SEC_LEVEL_2:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
+ break;
+ case SEC_LEVEL_2_CKIP:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
+ break;
+ case SEC_LEVEL_3:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
+ break;
+ }
+
+ IPW_DEBUG_HC(
+ "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
+ security->auth_mode, security->allowed_ciphers, security_level);
+
+ security->replay_counters_number = 0;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+int ipw2100_set_tx_power(struct ipw2100_priv *priv,
+ u32 tx_power)
+{
+ struct host_command cmd = {
+ .host_command = TX_POWER_INDEX,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err = 0;
+
+ cmd.host_command_parameters[0] = tx_power;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (!err)
+ priv->tx_power = tx_power;
+
+ return 0;
+}
+
+int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
+ u32 interval, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = BEACON_INTERVAL,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = interval;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+void ipw2100_queues_initialize(struct ipw2100_priv *priv)
+{
+ ipw2100_tx_initialize(priv);
+ ipw2100_rx_initialize(priv);
+ ipw2100_msg_initialize(priv);
+}
+
+void ipw2100_queues_free(struct ipw2100_priv *priv)
+{
+ ipw2100_tx_free(priv);
+ ipw2100_rx_free(priv);
+ ipw2100_msg_free(priv);
+}
+
+int ipw2100_queues_allocate(struct ipw2100_priv *priv)
+{
+ if (ipw2100_tx_allocate(priv) ||
+ ipw2100_rx_allocate(priv) ||
+ ipw2100_msg_allocate(priv))
+ goto fail;
+
+ return 0;
+
+ fail:
+ ipw2100_tx_free(priv);
+ ipw2100_rx_free(priv);
+ ipw2100_msg_free(priv);
+ return -ENOMEM;
+}
+
+#define IPW_PRIVACY_CAPABLE 0x0008
+
+static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = WEP_FLAGS,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = flags;
+
+ IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+struct ipw2100_wep_key {
+ u8 idx;
+ u8 len;
+ u8 key[13];
+};
+
+/* Macros to ease up priting WEP keys */
+#define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
+#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
+#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
+#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
+
+
+/**
+ * Set a the wep key
+ *
+ * @priv: struct to work on
+ * @idx: index of the key we want to set
+ * @key: ptr to the key data to set
+ * @len: length of the buffer at @key
+ * @batch_mode: FIXME perform the operation in batch mode, not
+ * disabling the device.
+ *
+ * @returns 0 if OK, < 0 errno code on error.
+ *
+ * Fill out a command structure with the new wep key, length an
+ * index and send it down the wire.
+ */
+static int ipw2100_set_key(struct ipw2100_priv *priv,
+ int idx, char *key, int len, int batch_mode)
+{
+ int keylen = len ? (len <= 5 ? 5 : 13) : 0;
+ struct host_command cmd = {
+ .host_command = WEP_KEY_INFO,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct ipw2100_wep_key),
+ };
+ struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters;
+ int err;
+
+ IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
+ idx, keylen, len);
+
+ /* NOTE: We don't check cached values in case the firmware was reset
+ * or some other problem is occuring. If the user is setting the key,
+ * then we push the change */
+
+ wep_key->idx = idx;
+ wep_key->len = keylen;
+
+ if (keylen) {
+ memcpy(wep_key->key, key, len);
+ memset(wep_key->key + len, 0, keylen - len);
+ }
+
+ /* Will be optimized out on debug not being configured in */
+ if (keylen == 0)
+ IPW_DEBUG_WEP("%s: Clearing key %d\n",
+ priv->net_dev->name, wep_key->idx);
+ else if (keylen == 5)
+ IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
+ priv->net_dev->name, wep_key->idx, wep_key->len,
+ WEP_STR_64(wep_key->key));
+ else
+ IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
+ "\n",
+ priv->net_dev->name, wep_key->idx, wep_key->len,
+ WEP_STR_128(wep_key->key));
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ int err2 = ipw2100_enable_adapter(priv);
+ if (err == 0)
+ err = err2;
+ }
+ return err;
+}
+
+static int ipw2100_set_key_index(struct ipw2100_priv *priv,
+ int idx, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = WEP_KEY_INDEX,
+ .host_command_sequence = 0,
+ .host_command_length = 4,
+ .host_command_parameters[0] = idx,
+ };
+ int err;
+
+ IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
+
+ if (idx < 0 || idx > 3)
+ return -EINVAL;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+
+static int ipw2100_configure_security(struct ipw2100_priv *priv,
+ int batch_mode)
+{
+ int i, err, auth_mode, sec_level, use_group;
+
+ if (!(priv->status & STATUS_RUNNING))
+ return 0;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (!priv->sec.enabled) {
+ err = ipw2100_set_security_information(
+ priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1);
+ } else {
+ auth_mode = IPW_AUTH_OPEN;
+ if ((priv->sec.flags & SEC_AUTH_MODE) &&
+ (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
+ auth_mode = IPW_AUTH_SHARED;
+
+ sec_level = SEC_LEVEL_0;
+ if (priv->sec.flags & SEC_LEVEL)
+ sec_level = priv->sec.level;
+
+ use_group = 0;
+ if (priv->sec.flags & SEC_UNICAST_GROUP)
+ use_group = priv->sec.unicast_uses_group;
+
+ err = ipw2100_set_security_information(
+ priv, auth_mode, sec_level, use_group, 1);
+ }
+
+ if (err)
+ goto exit;
+
+ if (priv->sec.enabled) {
+ for (i = 0; i < 4; i++) {
+ if (!(priv->sec.flags & (1 << i))) {
+ memset(priv->sec.keys[i], 0, WEP_KEY_LEN);
+ priv->sec.key_sizes[i] = 0;
+ } else {
+ err = ipw2100_set_key(priv, i,
+ priv->sec.keys[i],
+ priv->sec.key_sizes[i],
+ 1);
+ if (err)
+ goto exit;
+ }
+ }
+
+ ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
+ }
+
+ /* Always enable privacy so the Host can filter WEP packets if
+ * encrypted data is sent up */
+ err = ipw2100_set_wep_flags(
+ priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
+ if (err)
+ goto exit;
+
+ priv->status &= ~STATUS_SECURITY_UPDATED;
+
+ exit:
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+static void ipw2100_security_work(struct ipw2100_priv *priv)
+{
+ /* If we happen to have reconnected before we get a chance to
+ * process this, then update the security settings--which causes
+ * a disassociation to occur */
+ if (!(priv->status & STATUS_ASSOCIATED) &&
+ priv->status & STATUS_SECURITY_UPDATED)
+ ipw2100_configure_security(priv, 0);
+}
+
+static void shim__set_security(struct net_device *dev,
+ struct ieee80211_security *sec)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int i, force_update = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED))
+ goto done;
+
+ for (i = 0; i < 4; i++) {
+ if (sec->flags & (1 << i)) {
+ priv->sec.key_sizes[i] = sec->key_sizes[i];
+ if (sec->key_sizes[i] == 0)
+ priv->sec.flags &= ~(1 << i);
+ else
+ memcpy(priv->sec.keys[i], sec->keys[i],
+ sec->key_sizes[i]);
+ priv->sec.flags |= (1 << i);
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+ }
+
+ if ((sec->flags & SEC_ACTIVE_KEY) &&
+ priv->sec.active_key != sec->active_key) {
+ if (sec->active_key <= 3) {
+ priv->sec.active_key = sec->active_key;
+ priv->sec.flags |= SEC_ACTIVE_KEY;
+ } else
+ priv->sec.flags &= ~SEC_ACTIVE_KEY;
+
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if ((sec->flags & SEC_AUTH_MODE) &&
+ (priv->sec.auth_mode != sec->auth_mode)) {
+ priv->sec.auth_mode = sec->auth_mode;
+ priv->sec.flags |= SEC_AUTH_MODE;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if (sec->flags & SEC_ENABLED &&
+ priv->sec.enabled != sec->enabled) {
+ priv->sec.flags |= SEC_ENABLED;
+ priv->sec.enabled = sec->enabled;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ force_update = 1;
+ }
+
+ if (sec->flags & SEC_LEVEL &&
+ priv->sec.level != sec->level) {
+ priv->sec.level = sec->level;
+ priv->sec.flags |= SEC_LEVEL;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
+ priv->sec.flags & (1<<8) ? '1' : '0',
+ priv->sec.flags & (1<<7) ? '1' : '0',
+ priv->sec.flags & (1<<6) ? '1' : '0',
+ priv->sec.flags & (1<<5) ? '1' : '0',
+ priv->sec.flags & (1<<4) ? '1' : '0',
+ priv->sec.flags & (1<<3) ? '1' : '0',
+ priv->sec.flags & (1<<2) ? '1' : '0',
+ priv->sec.flags & (1<<1) ? '1' : '0',
+ priv->sec.flags & (1<<0) ? '1' : '0');
+
+/* As a temporary work around to enable WPA until we figure out why
+ * wpa_supplicant toggles the security capability of the driver, which
+ * forces a disassocation with force_update...
+ *
+ * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
+ if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
+ ipw2100_configure_security(priv, 0);
+done:
+ up(&priv->action_sem);
+}
+
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
+{
+ int err;
+ int batch_mode = 1;
+ u8 *bssid;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+ if (err)
+ return err;
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+ }
+#endif /* CONFIG_IPW2100_MONITOR */
+
+ err = ipw2100_read_mac_address(priv);
+ if (err)
+ return -EIO;
+
+ err = ipw2100_set_mac_address(priv, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_system_config(priv, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
+ if (err)
+ return err;
+
+ /* Default to power mode OFF */
+ err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+ if (err)
+ return err;
+
+ err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
+ if (err)
+ return err;
+
+ if (priv->config & CFG_STATIC_BSSID)
+ bssid = priv->bssid;
+ else
+ bssid = NULL;
+ err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->config & CFG_STATIC_ESSID)
+ err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
+ batch_mode);
+ else
+ err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_configure_security(priv, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ err = ipw2100_set_ibss_beacon_interval(
+ priv, priv->beacon_interval, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_tx_power(priv, priv->tx_power);
+ if (err)
+ return err;
+ }
+
+ /*
+ err = ipw2100_set_fragmentation_threshold(
+ priv, priv->frag_threshold, batch_mode);
+ if (err)
+ return err;
+ */
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+/*************************************************************************
+ *
+ * EXTERNALLY CALLED METHODS
+ *
+ *************************************************************************/
+
+/* This method is called by the network layer -- not to be confused with
+ * ipw2100_set_mac_address() declared above called by this driver (and this
+ * method as well) to talk to the firmware */
+static int ipw2100_set_address(struct net_device *dev, void *p)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct sockaddr *addr = p;
+ int err = 0;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ down(&priv->action_sem);
+
+ priv->config |= CFG_CUSTOM_MAC;
+ memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
+
+ err = ipw2100_set_mac_address(priv, 0);
+ if (err)
+ goto done;
+
+ priv->reset_backoff = 0;
+ up(&priv->action_sem);
+ ipw2100_reset_adapter(priv);
+ return 0;
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_open(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ unsigned long flags;
+ IPW_DEBUG_INFO("dev->open\n");
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ if (priv->status & STATUS_ASSOCIATED)
+ netif_start_queue(dev);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ return 0;
+}
+
+static int ipw2100_close(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ unsigned long flags;
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->status & STATUS_ASSOCIATED)
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+
+ /* Flush the TX queue ... */
+ while (!list_empty(&priv->tx_pend_list)) {
+ element = priv->tx_pend_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ list_del(element);
+ DEC_STAT(&priv->tx_pend_stat);
+
+ ieee80211_txb_free(packet->info.d_struct.txb);
+ packet->info.d_struct.txb = NULL;
+
+ list_add_tail(element, &priv->tx_free_list);
+ INC_STAT(&priv->tx_free_stat);
+ }
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+
+/*
+ * TODO: Fix this function... its just wrong
+ */
+static void ipw2100_tx_timeout(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ priv->ieee->stats.tx_errors++;
+
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ return;
+#endif
+
+ IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
+ dev->name);
+ schedule_reset(priv);
+}
+
+
+/*
+ * TODO: reimplement it so that it reads statistics
+ * from the adapter using ordinal tables
+ * instead of/in addition to collecting them
+ * in the driver
+ */
+static struct net_device_stats *ipw2100_stats(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ return &priv->ieee->stats;
+}
+
+/* Support for wpa_supplicant. Will be replaced with WEXT once
+ * they get WPA support. */
+#ifdef CONFIG_IEEE80211_WPA
+
+/* following definitions must match definitions in driver_ipw2100.c */
+
+#define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30
+
+#define IPW2100_CMD_SET_WPA_PARAM 1
+#define IPW2100_CMD_SET_WPA_IE 2
+#define IPW2100_CMD_SET_ENCRYPTION 3
+#define IPW2100_CMD_MLME 4
+
+#define IPW2100_PARAM_WPA_ENABLED 1
+#define IPW2100_PARAM_TKIP_COUNTERMEASURES 2
+#define IPW2100_PARAM_DROP_UNENCRYPTED 3
+#define IPW2100_PARAM_PRIVACY_INVOKED 4
+#define IPW2100_PARAM_AUTH_ALGS 5
+#define IPW2100_PARAM_IEEE_802_1X 6
+
+#define IPW2100_MLME_STA_DEAUTH 1
+#define IPW2100_MLME_STA_DISASSOC 2
+
+#define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2
+#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3
+#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5
+#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7
+
+#define IPW2100_CRYPT_ALG_NAME_LEN 16
+
+struct ipw2100_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 name;
+ u32 value;
+ } wpa_param;
+ struct {
+ u32 len;
+ u8 *data;
+ } wpa_ie;
+ struct{
+ int command;
+ int reason_code;
+ } mlme;
+ struct {
+ u8 alg[IPW2100_CRYPT_ALG_NAME_LEN];
+ u8 set_tx;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+
+ } u;
+};
+
+/* end of driver_ipw2100.c code */
+
+static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){
+
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_security sec = {
+ .flags = SEC_LEVEL | SEC_ENABLED,
+ };
+ int ret = 0;
+
+ ieee->wpa_enabled = value;
+
+ if (value){
+ sec.level = SEC_LEVEL_3;
+ sec.enabled = 1;
+ } else {
+ sec.level = SEC_LEVEL_0;
+ sec.enabled = 0;
+ }
+
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+ else
+ ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+#define AUTH_ALG_OPEN_SYSTEM 0x1
+#define AUTH_ALG_SHARED_KEY 0x2
+
+static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){
+
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_security sec = {
+ .flags = SEC_AUTH_MODE,
+ };
+ int ret = 0;
+
+ if (value & AUTH_ALG_SHARED_KEY){
+ sec.auth_mode = WLAN_AUTH_SHARED_KEY;
+ ieee->open_wep = 0;
+ } else {
+ sec.auth_mode = WLAN_AUTH_OPEN;
+ ieee->open_wep = 1;
+ }
+
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+ else
+ ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+
+static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int ret=0;
+
+ switch(name){
+ case IPW2100_PARAM_WPA_ENABLED:
+ ret = ipw2100_wpa_enable(priv, value);
+ break;
+
+ case IPW2100_PARAM_TKIP_COUNTERMEASURES:
+ priv->ieee->tkip_countermeasures=value;
+ break;
+
+ case IPW2100_PARAM_DROP_UNENCRYPTED:
+ priv->ieee->drop_unencrypted=value;
+ break;
+
+ case IPW2100_PARAM_PRIVACY_INVOKED:
+ priv->ieee->privacy_invoked=value;
+ break;
+
+ case IPW2100_PARAM_AUTH_ALGS:
+ ret = ipw2100_wpa_set_auth_algs(priv, value);
+ break;
+
+ case IPW2100_PARAM_IEEE_802_1X:
+ priv->ieee->ieee802_1x=value;
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown WPA param: %d\n",
+ dev->name, name);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int ret=0;
+
+ switch(command){
+ case IPW2100_MLME_STA_DEAUTH:
+ // silently ignore
+ break;
+
+ case IPW2100_MLME_STA_DISASSOC:
+ ipw2100_disassociate_bssid(priv);
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown MLME request: %d\n",
+ dev->name, command);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+
+void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
+ char *wpa_ie, int wpa_ie_len){
+
+ struct ipw2100_wpa_assoc_frame frame;
+
+ frame.fixed_ie_mask = 0;
+
+ /* copy WPA IE */
+ memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
+ frame.var_ie_len = wpa_ie_len;
+
+ /* make sure WPA is enabled */
+ ipw2100_wpa_enable(priv, 1);
+ ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+
+
+static int ipw2100_wpa_set_wpa_ie(struct net_device *dev,
+ struct ipw2100_param *param, int plen){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee;
+ u8 *buf;
+
+ if (! ieee->wpa_enabled)
+ return -EOPNOTSUPP;
+
+ if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
+ (param->u.wpa_ie.len &&
+ param->u.wpa_ie.data==NULL))
+ return -EINVAL;
+
+ if (param->u.wpa_ie.len){
+ buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
+
+ kfree(ieee->wpa_ie);
+ ieee->wpa_ie = buf;
+ ieee->wpa_ie_len = param->u.wpa_ie.len;
+
+ } else {
+ kfree(ieee->wpa_ie);
+ ieee->wpa_ie = NULL;
+ ieee->wpa_ie_len = 0;
+ }
+
+ ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
+
+ return 0;
+}
+
+/* implementation borrowed from hostap driver */
+
+static int ipw2100_wpa_set_encryption(struct net_device *dev,
+ struct ipw2100_param *param, int param_len){
+
+ int ret = 0;
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_crypto_ops *ops;
+ struct ieee80211_crypt_data **crypt;
+
+ struct ieee80211_security sec = {
+ .flags = 0,
+ };
+
+ param->u.crypt.err = 0;
+ param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0';
+
+ if (param_len !=
+ (int) ((char *) param->u.crypt.key - (char *) param) +
+ param->u.crypt.key_len){
+ IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len);
+ return -EINVAL;
+ }
+ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+ if (param->u.crypt.idx >= WEP_KEYS)
+ return -EINVAL;
+ crypt = &ieee->crypt[param->u.crypt.idx];
+ } else {
+ return -EINVAL;
+ }
+
+ if (strcmp(param->u.crypt.alg, "none") == 0) {
+ if (crypt){
+ sec.enabled = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ }
+ goto done;
+ }
+ sec.enabled = 1;
+ sec.flags |= SEC_ENABLED;
+
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
+ request_module("ieee80211_crypt_wep");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
+ request_module("ieee80211_crypt_tkip");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
+ request_module("ieee80211_crypt_ccmp");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ }
+ if (ops == NULL) {
+ IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n",
+ dev->name, param->u.crypt.alg);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (*crypt == NULL || (*crypt)->ops != ops) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ new_crypt = (struct ieee80211_crypt_data *)
+ kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL);
+ if (new_crypt == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ops;
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx);
+
+ if (new_crypt->priv == NULL) {
+ kfree(new_crypt);
+ param->u.crypt.err =
+ IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ *crypt = new_crypt;
+ }
+
+ if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
+ (*crypt)->ops->set_key(param->u.crypt.key,
+ param->u.crypt.key_len, param->u.crypt.seq,
+ (*crypt)->priv) < 0) {
+ IPW_DEBUG_INFO("%s: key setting failed\n",
+ dev->name);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (param->u.crypt.set_tx){
+ ieee->tx_keyidx = param->u.crypt.idx;
+ sec.active_key = param->u.crypt.idx;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+
+ if (ops->name != NULL){
+
+ if (strcmp(ops->name, "WEP") == 0) {
+ memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len);
+ sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
+ sec.flags |= (1 << param->u.crypt.idx);
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1;
+ } else if (strcmp(ops->name, "TKIP") == 0) {
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_2;
+ } else if (strcmp(ops->name, "CCMP") == 0) {
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_3;
+ }
+ }
+ done:
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+
+ /* Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack. */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port &&
+ ieee->reset_port(dev)) {
+ IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED;
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+
+static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){
+
+ struct ipw2100_param *param;
+ int ret=0;
+
+ IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length);
+
+ if (p->length < sizeof(struct ipw2100_param) || !p->pointer)
+ return -EINVAL;
+
+ param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL);
+ if (param == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(param, p->pointer, p->length)){
+ kfree(param);
+ return -EFAULT;
+ }
+
+ switch (param->cmd){
+
+ case IPW2100_CMD_SET_WPA_PARAM:
+ ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name,
+ param->u.wpa_param.value);
+ break;
+
+ case IPW2100_CMD_SET_WPA_IE:
+ ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length);
+ break;
+
+ case IPW2100_CMD_SET_ENCRYPTION:
+ ret = ipw2100_wpa_set_encryption(dev, param, p->length);
+ break;
+
+ case IPW2100_CMD_MLME:
+ ret = ipw2100_wpa_mlme(dev, param->u.mlme.command,
+ param->u.mlme.reason_code);
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown WPA supplicant request: %d\n",
+ dev->name, param->cmd);
+ ret = -EOPNOTSUPP;
+
+ }
+
+ if (ret == 0 && copy_to_user(p->pointer, param, p->length))
+ ret = -EFAULT;
+
+ kfree(param);
+ return ret;
+}
+#endif /* CONFIG_IEEE80211_WPA */
+
+static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+#ifdef CONFIG_IEEE80211_WPA
+ struct iwreq *wrq = (struct iwreq *) rq;
+ int ret=-1;
+ switch (cmd){
+ case IPW2100_IOCTL_WPA_SUPPLICANT:
+ ret = ipw2100_wpa_supplicant(dev, &wrq->u.data);
+ return ret;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+#endif /* CONFIG_IEEE80211_WPA */
+
+ return -EOPNOTSUPP;
+}
+
+
+static void ipw_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ char fw_ver[64], ucode_ver[64];
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+
+ ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
+ ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
+
+ snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
+ fw_ver, priv->eeprom_version, ucode_ver);
+
+ strcpy(info->bus_info, pci_name(priv->pci_dev));
+}
+
+static u32 ipw2100_ethtool_get_link(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
+}
+
+
+static struct ethtool_ops ipw2100_ethtool_ops = {
+ .get_link = ipw2100_ethtool_get_link,
+ .get_drvinfo = ipw_ethtool_get_drvinfo,
+};
+
+static void ipw2100_hang_check(void *adapter)
+{
+ struct ipw2100_priv *priv = adapter;
+ unsigned long flags;
+ u32 rtc = 0xa5a5a5a5;
+ u32 len = sizeof(rtc);
+ int restart = 0;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->fatal_error != 0) {
+ /* If fatal_error is set then we need to restart */
+ IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
+ priv->net_dev->name);
+
+ restart = 1;
+ } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
+ (rtc == priv->last_rtc)) {
+ /* Check if firmware is hung */
+ IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
+ priv->net_dev->name);
+
+ restart = 1;
+ }
+
+ if (restart) {
+ /* Kill timer */
+ priv->stop_hang_check = 1;
+ priv->hangs++;
+
+ /* Restart the NIC */
+ schedule_reset(priv);
+ }
+
+ priv->last_rtc = rtc;
+
+ if (!priv->stop_hang_check)
+ queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+
+static void ipw2100_rf_kill(void *adapter)
+{
+ struct ipw2100_priv *priv = adapter;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
+ if (!priv->stop_rf_kill)
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+ goto exit_unlock;
+ }
+
+ /* RF Kill is now disabled, so bring the device back up */
+
+ if (!(priv->status & STATUS_RF_KILL_MASK)) {
+ IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
+ "device\n");
+ schedule_reset(priv);
+ } else
+ IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
+ "enabled\n");
+
+ exit_unlock:
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
+
+/* Look into using netdev destructor to shutdown ieee80211? */
+
+static struct net_device *ipw2100_alloc_device(
+ struct pci_dev *pci_dev,
+ char *base_addr,
+ unsigned long mem_start,
+ unsigned long mem_len)
+{
+ struct ipw2100_priv *priv;
+ struct net_device *dev;
+
+ dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
+ if (!dev)
+ return NULL;
+ priv = ieee80211_priv(dev);
+ priv->ieee = netdev_priv(dev);
+ priv->pci_dev = pci_dev;
+ priv->net_dev = dev;
+
+ priv->ieee->hard_start_xmit = ipw2100_tx;
+ priv->ieee->set_security = shim__set_security;
+
+ dev->open = ipw2100_open;
+ dev->stop = ipw2100_close;
+ dev->init = ipw2100_net_init;
+ dev->do_ioctl = ipw2100_ioctl;
+ dev->get_stats = ipw2100_stats;
+ dev->ethtool_ops = &ipw2100_ethtool_ops;
+ dev->tx_timeout = ipw2100_tx_timeout;
+ dev->wireless_handlers = &ipw2100_wx_handler_def;
+ dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+ dev->set_mac_address = ipw2100_set_address;
+ dev->watchdog_timeo = 3*HZ;
+ dev->irq = 0;
+
+ dev->base_addr = (unsigned long)base_addr;
+ dev->mem_start = mem_start;
+ dev->mem_end = dev->mem_start + mem_len - 1;
+
+ /* NOTE: We don't use the wireless_handlers hook
+ * in dev as the system will start throwing WX requests
+ * to us before we're actually initialized and it just
+ * ends up causing problems. So, we just handle
+ * the WX extensions through the ipw2100_ioctl interface */
+
+
+ /* memset() puts everything to 0, so we only have explicitely set
+ * those values that need to be something else */
+
+ /* If power management is turned on, default to AUTO mode */
+ priv->power_mode = IPW_POWER_AUTO;
+
+
+
+#ifdef CONFIG_IEEE80211_WPA
+ priv->ieee->wpa_enabled = 0;
+ priv->ieee->tkip_countermeasures = 0;
+ priv->ieee->drop_unencrypted = 0;
+ priv->ieee->privacy_invoked = 0;
+ priv->ieee->ieee802_1x = 1;
+#endif /* CONFIG_IEEE80211_WPA */
+
+ /* Set module parameters */
+ switch (mode) {
+ case 1:
+ priv->ieee->iw_mode = IW_MODE_ADHOC;
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case 2:
+ priv->ieee->iw_mode = IW_MODE_MONITOR;
+ break;
+#endif
+ default:
+ case 0:
+ priv->ieee->iw_mode = IW_MODE_INFRA;
+ break;
+ }
+
+ if (disable == 1)
+ priv->status |= STATUS_RF_KILL_SW;
+
+ if (channel != 0 &&
+ ((channel >= REG_MIN_CHANNEL) &&
+ (channel <= REG_MAX_CHANNEL))) {
+ priv->config |= CFG_STATIC_CHANNEL;
+ priv->channel = channel;
+ }
+
+ if (associate)
+ priv->config |= CFG_ASSOCIATE;
+
+ priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
+ priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
+ priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
+ priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
+ priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
+ priv->tx_power = IPW_TX_POWER_DEFAULT;
+ priv->tx_rates = DEFAULT_TX_RATES;
+
+ strcpy(priv->nick, "ipw2100");
+
+ spin_lock_init(&priv->low_lock);
+ sema_init(&priv->action_sem, 1);
+ sema_init(&priv->adapter_sem, 1);
+
+ init_waitqueue_head(&priv->wait_command_queue);
+
+ netif_carrier_off(dev);
+
+ INIT_LIST_HEAD(&priv->msg_free_list);
+ INIT_LIST_HEAD(&priv->msg_pend_list);
+ INIT_STAT(&priv->msg_free_stat);
+ INIT_STAT(&priv->msg_pend_stat);
+
+ INIT_LIST_HEAD(&priv->tx_free_list);
+ INIT_LIST_HEAD(&priv->tx_pend_list);
+ INIT_STAT(&priv->tx_free_stat);
+ INIT_STAT(&priv->tx_pend_stat);
+
+ INIT_LIST_HEAD(&priv->fw_pend_list);
+ INIT_STAT(&priv->fw_pend_stat);
+
+
+#ifdef CONFIG_SOFTWARE_SUSPEND2
+ priv->workqueue = create_workqueue(DRV_NAME, 0);
+#else
+ priv->workqueue = create_workqueue(DRV_NAME);
+#endif
+ INIT_WORK(&priv->reset_work,
+ (void (*)(void *))ipw2100_reset_adapter, priv);
+ INIT_WORK(&priv->security_work,
+ (void (*)(void *))ipw2100_security_work, priv);
+ INIT_WORK(&priv->wx_event_work,
+ (void (*)(void *))ipw2100_wx_event_work, priv);
+ INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
+ INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
+
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ ipw2100_irq_tasklet, (unsigned long)priv);
+
+ /* NOTE: We do not start the deferred work for status checks yet */
+ priv->stop_rf_kill = 1;
+ priv->stop_hang_check = 1;
+
+ return dev;
+}
+
+
+
+#define PCI_DMA_32BIT 0x00000000ffffffffULL
+
+static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
+ const struct pci_device_id *ent)
+{
+ unsigned long mem_start, mem_len, mem_flags;
+ char *base_addr = NULL;
+ struct net_device *dev = NULL;
+ struct ipw2100_priv *priv = NULL;
+ int err = 0;
+ int registered = 0;
+ u32 val;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ mem_start = pci_resource_start(pci_dev, 0);
+ mem_len = pci_resource_len(pci_dev, 0);
+ mem_flags = pci_resource_flags(pci_dev, 0);
+
+ if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
+ IPW_DEBUG_INFO("weird - resource type is not memory\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ base_addr = ioremap_nocache(mem_start, mem_len);
+ if (!base_addr) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling ioremap_nocache.\n");
+ err = -EIO;
+ goto fail;
+ }
+
+ /* allocate and initialize our net_device */
+ dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
+ if (!dev) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling ipw2100_alloc_device.\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* set up PCI mappings for device */
+ err = pci_enable_device(pci_dev);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_enable_device.\n");
+ return err;
+ }
+
+ priv = ieee80211_priv(dev);
+
+ pci_set_master(pci_dev);
+ pci_set_drvdata(pci_dev, priv);
+
+ err = pci_set_dma_mask(pci_dev, PCI_DMA_32BIT);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_set_dma_mask.\n");
+ pci_disable_device(pci_dev);
+ return err;
+ }
+
+ err = pci_request_regions(pci_dev, DRV_NAME);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_request_regions.\n");
+ pci_disable_device(pci_dev);
+ return err;
+ }
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(pci_dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+ pci_set_power_state(pci_dev, 0);
+
+ if (!ipw2100_hw_is_adapter_in_system(dev)) {
+ printk(KERN_WARNING DRV_NAME
+ "Device not found via register read.\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ SET_NETDEV_DEV(dev, &pci_dev->dev);
+
+ /* Force interrupts to be shut off on the device */
+ priv->status |= STATUS_INT_ENABLED;
+ ipw2100_disable_interrupts(priv);
+
+ /* Allocate and initialize the Tx/Rx queues and lists */
+ if (ipw2100_queues_allocate(priv)) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calilng ipw2100_queues_allocate.\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+ ipw2100_queues_initialize(priv);
+
+ err = request_irq(pci_dev->irq,
+ ipw2100_interrupt, SA_SHIRQ,
+ dev->name, priv);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling request_irq: %d.\n",
+ pci_dev->irq);
+ goto fail;
+ }
+ dev->irq = pci_dev->irq;
+
+ IPW_DEBUG_INFO("Attempting to register device...\n");
+
+ SET_MODULE_OWNER(dev);
+
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel PRO/Wireless 2100 Network Connection\n");
+
+ /* Bring up the interface. Pre 0.46, after we registered the
+ * network device we would call ipw2100_up. This introduced a race
+ * condition with newer hotplug configurations (network was coming
+ * up and making calls before the device was initialized).
+ *
+ * If we called ipw2100_up before we registered the device, then the
+ * device name wasn't registered. So, we instead use the net_dev->init
+ * member to call a function that then just turns and calls ipw2100_up.
+ * net_dev->init is called after name allocation but before the
+ * notifier chain is called */
+ down(&priv->action_sem);
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling register_netdev.\n");
+ goto fail_unlock;
+ }
+ registered = 1;
+
+ IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
+
+ /* perform this after register_netdev so that dev->name is set */
+ sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+ netif_carrier_off(dev);
+
+ /* If the RF Kill switch is disabled, go ahead and complete the
+ * startup sequence */
+ if (!(priv->status & STATUS_RF_KILL_MASK)) {
+ /* Enable the adapter - sends HOST_COMPLETE */
+ if (ipw2100_enable_adapter(priv)) {
+ printk(KERN_WARNING DRV_NAME
+ ": %s: failed in call to enable adapter.\n",
+ priv->net_dev->name);
+ ipw2100_hw_stop_adapter(priv);
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ /* Start a scan . . . */
+ ipw2100_set_scan_options(priv);
+ ipw2100_start_scan(priv);
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+
+ priv->status |= STATUS_INITIALIZED;
+
+ up(&priv->action_sem);
+
+ return 0;
+
+ fail_unlock:
+ up(&priv->action_sem);
+
+ fail:
+ if (dev) {
+ if (registered)
+ unregister_netdev(dev);
+
+ ipw2100_hw_stop_adapter(priv);
+
+ ipw2100_disable_interrupts(priv);
+
+ if (dev->irq)
+ free_irq(dev->irq, priv);
+
+ ipw2100_kill_workqueue(priv);
+
+ /* These are safe to call even if they weren't allocated */
+ ipw2100_queues_free(priv);
+ sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+ free_ieee80211(dev);
+ pci_set_drvdata(pci_dev, NULL);
+ }
+
+ if (base_addr)
+ iounmap((char*)base_addr);
+
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+
+ return err;
+}
+
+static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev;
+
+ if (priv) {
+ down(&priv->action_sem);
+
+ priv->status &= ~STATUS_INITIALIZED;
+
+ dev = priv->net_dev;
+ sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+#ifdef CONFIG_PM
+ if (ipw2100_firmware.version)
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+ /* Take down the hardware */
+ ipw2100_down(priv);
+
+ /* Release the semaphore so that the network subsystem can
+ * complete any needed calls into the driver... */
+ up(&priv->action_sem);
+
+ /* Unregister the device first - this results in close()
+ * being called if the device is open. If we free storage
+ * first, then close() will crash. */
+ unregister_netdev(dev);
+
+ /* ipw2100_down will ensure that there is no more pending work
+ * in the workqueue's, so we can safely remove them now. */
+ ipw2100_kill_workqueue(priv);
+
+ ipw2100_queues_free(priv);
+
+ /* Free potential debugging firmware snapshot */
+ ipw2100_snapshot_free(priv);
+
+ if (dev->irq)
+ free_irq(dev->irq, priv);
+
+ if (dev->base_addr)
+ iounmap((unsigned char *)dev->base_addr);
+
+ free_ieee80211(dev);
+ }
+
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+
+#ifdef CONFIG_PM
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state)
+#else
+static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
+#endif
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev = priv->net_dev;
+
+ IPW_DEBUG_INFO("%s: Going into suspend...\n",
+ dev->name);
+
+ down(&priv->action_sem);
+ if (priv->status & STATUS_INITIALIZED) {
+ /* Take down the device; powers it off, etc. */
+ ipw2100_down(priv);
+ }
+
+ /* Remove the PRESENT state of the device */
+ netif_device_detach(dev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_save_state(pci_dev, priv->pm_state);
+#else
+ pci_save_state(pci_dev);
+#endif
+ pci_disable_device (pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+ pci_set_power_state(pci_dev, state);
+#else
+ pci_set_power_state(pci_dev, PCI_D3hot);
+#endif
+
+ up(&priv->action_sem);
+
+ return 0;
+}
+
+static int ipw2100_resume(struct pci_dev *pci_dev)
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev = priv->net_dev;
+ u32 val;
+
+ if (IPW2100_PM_DISABLED)
+ return 0;
+
+ down(&priv->action_sem);
+
+ IPW_DEBUG_INFO("%s: Coming out of suspend...\n",
+ dev->name);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+ pci_set_power_state(pci_dev, 0);
+#else
+ pci_set_power_state(pci_dev, PCI_D0);
+#endif
+ pci_enable_device(pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_restore_state(pci_dev, priv->pm_state);
+#else
+ pci_restore_state(pci_dev);
+#endif
+
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+ * from interfering with C3 CPU state. pci_restore_state won't help
+ * here since it only restores the first 64 bytes pci config header.
+ */
+ pci_read_config_dword(pci_dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+ /* Set the device back into the PRESENT state; this will also wake
+ * the queue of needed */
+ netif_device_attach(dev);
+
+ /* Bring the device back up */
+ if (!(priv->status & STATUS_RF_KILL_SW))
+ ipw2100_up(priv, 0);
+
+ up(&priv->action_sem);
+
+ return 0;
+}
+#endif
+
+
+#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
+
+static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
+ IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
+ IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
+
+ IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
+
+ IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
+
+static struct pci_driver ipw2100_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ipw2100_pci_id_table,
+ .probe = ipw2100_pci_init_one,
+ .remove = __devexit_p(ipw2100_pci_remove_one),
+#ifdef CONFIG_PM
+ .suspend = ipw2100_suspend,
+ .resume = ipw2100_resume,
+#endif
+};
+
+
+/**
+ * Initialize the ipw2100 driver/module
+ *
+ * @returns 0 if ok, < 0 errno node con error.
+ *
+ * Note: we cannot init the /proc stuff until the PCI driver is there,
+ * or we risk an unlikely race condition on someone accessing
+ * uninitialized data in the PCI dev struct through /proc.
+ */
+static int __init ipw2100_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
+
+#ifdef CONFIG_IEEE80211_NOWEP
+ IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n");
+#endif
+
+ ret = pci_module_init(&ipw2100_pci_driver);
+
+#ifdef CONFIG_IPW_DEBUG
+ ipw2100_debug_level = debug;
+ driver_create_file(&ipw2100_pci_driver.driver,
+ &driver_attr_debug_level);
+#endif
+
+ return ret;
+}
+
+
+/**
+ * Cleanup ipw2100 driver registration
+ */
+static void __exit ipw2100_exit(void)
+{
+ /* FIXME: IPG: check that we have no instances of the devices open */
+#ifdef CONFIG_IPW_DEBUG
+ driver_remove_file(&ipw2100_pci_driver.driver,
+ &driver_attr_debug_level);
+#endif
+ pci_unregister_driver(&ipw2100_pci_driver);
+}
+
+module_init(ipw2100_init);
+module_exit(ipw2100_exit);
+
+#define WEXT_USECHANNELS 1
+
+const long ipw2100_frequencies[] = {
+ 2412, 2417, 2422, 2427,
+ 2432, 2437, 2442, 2447,
+ 2452, 2457, 2462, 2467,
+ 2472, 2484
+};
+
+#define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
+ sizeof(ipw2100_frequencies[0]))
+
+const long ipw2100_rates_11b[] = {
+ 1000000,
+ 2000000,
+ 5500000,
+ 11000000
+};
+
+#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
+
+static int ipw2100_wx_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ if (!(priv->status & STATUS_ASSOCIATED))
+ strcpy(wrqu->name, "unassociated");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
+
+ IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+ return 0;
+}
+
+
+static int ipw2100_wx_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_freq *fwrq = &wrqu->freq;
+ int err = 0;
+
+ if (priv->ieee->iw_mode == IW_MODE_INFRA)
+ return -EOPNOTSUPP;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ /* if setting by freq convert to channel */
+ if (fwrq->e == 1) {
+ if ((fwrq->m >= (int) 2.412e8 &&
+ fwrq->m <= (int) 2.487e8)) {
+ int f = fwrq->m / 100000;
+ int c = 0;
+
+ while ((c < REG_MAX_CHANNEL) &&
+ (f != ipw2100_frequencies[c]))
+ c++;
+
+ /* hack to fall through */
+ fwrq->e = 0;
+ fwrq->m = c + 1;
+ }
+ }
+
+ if (fwrq->e > 0 || fwrq->m > 1000)
+ return -EOPNOTSUPP;
+ else { /* Set the channel */
+ IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
+ err = ipw2100_set_channel(priv, fwrq->m, 0);
+ }
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+
+static int ipw2100_wx_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->freq.e = 0;
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured CHANNEL then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_CHANNEL ||
+ priv->status & STATUS_ASSOCIATED)
+ wrqu->freq.m = priv->channel;
+ else
+ wrqu->freq.m = 0;
+
+ IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
+ return 0;
+
+}
+
+static int ipw2100_wx_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
+
+ if (wrqu->mode == priv->ieee->iw_mode)
+ return 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ switch (wrqu->mode) {
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+ break;
+#endif /* CONFIG_IPW2100_MONITOR */
+ case IW_MODE_ADHOC:
+ err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
+ break;
+ case IW_MODE_INFRA:
+ case IW_MODE_AUTO:
+ default:
+ err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
+ break;
+ }
+
+done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->mode = priv->ieee->iw_mode;
+ IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
+
+ return 0;
+}
+
+
+#define POWER_MODES 5
+
+/* Values are in microsecond */
+const s32 timeout_duration[POWER_MODES] = {
+ 350000,
+ 250000,
+ 75000,
+ 37000,
+ 25000,
+};
+
+const s32 period_duration[POWER_MODES] = {
+ 400000,
+ 700000,
+ 1000000,
+ 1000000,
+ 1000000
+};
+
+static int ipw2100_wx_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_range *range = (struct iw_range *)extra;
+ u16 val;
+ int i, level;
+
+ wrqu->data.length = sizeof(*range);
+ memset(range, 0, sizeof(*range));
+
+ /* Let's try to keep this struct in the same order as in
+ * linux/include/wireless.h
+ */
+
+ /* TODO: See what values we can set, and remove the ones we can't
+ * set, or fill them with some default data.
+ */
+
+ /* ~5 Mb/s real (802.11b) */
+ range->throughput = 5 * 1000 * 1000;
+
+// range->sensitivity; /* signal level threshold range */
+
+ range->max_qual.qual = 100;
+ /* TODO: Find real max RSSI and stick here */
+ range->max_qual.level = 0;
+ range->max_qual.noise = 0;
+ range->max_qual.updated = 7; /* Updated all three */
+
+ range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
+ /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = 7; /* Updated all three */
+
+ range->num_bitrates = RATE_COUNT;
+
+ for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
+ range->bitrate[i] = ipw2100_rates_11b[i];
+ }
+
+ range->min_rts = MIN_RTS_THRESHOLD;
+ range->max_rts = MAX_RTS_THRESHOLD;
+ range->min_frag = MIN_FRAG_THRESHOLD;
+ range->max_frag = MAX_FRAG_THRESHOLD;
+
+ range->min_pmp = period_duration[0]; /* Minimal PM period */
+ range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */
+ range->min_pmt = timeout_duration[POWER_MODES-1]; /* Minimal PM timeout */
+ range->max_pmt = timeout_duration[0];/* Maximal PM timeout */
+
+ /* How to decode max/min PM period */
+ range->pmp_flags = IW_POWER_PERIOD;
+ /* How to decode max/min PM period */
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ /* What PM options are supported */
+ range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13; /* Different token sizes */
+ range->num_encoding_sizes = 2; /* Number of entry in the list */
+ range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
+// range->encoding_login_index; /* token index for login token */
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ range->txpower_capa = IW_TXPOW_DBM;
+ range->num_txpower = IW_MAX_TXPOWER;
+ for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER;
+ i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) /
+ (IW_MAX_TXPOWER - 1))
+ range->txpower[i] = level / 16;
+ } else {
+ range->txpower_capa = 0;
+ range->num_txpower = 0;
+ }
+
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 16;
+
+// range->retry_capa; /* What retry options are supported */
+// range->retry_flags; /* How to decode max/min retry limit */
+// range->r_time_flags; /* How to decode max/min retry life */
+// range->min_retry; /* Minimal number of retries */
+// range->max_retry; /* Maximal number of retries */
+// range->min_r_time; /* Minimal retry lifetime */
+// range->max_r_time; /* Maximal retry lifetime */
+
+ range->num_channels = FREQ_COUNT;
+
+ val = 0;
+ for (i = 0; i < FREQ_COUNT; i++) {
+ // TODO: Include only legal frequencies for some countries
+// if (local->channel_mask & (1 << i)) {
+ range->freq[val].i = i + 1;
+ range->freq[val].m = ipw2100_frequencies[i] * 100000;
+ range->freq[val].e = 1;
+ val++;
+// }
+ if (val == IW_MAX_FREQUENCIES)
+ break;
+ }
+ range->num_frequency = val;
+
+ IPW_DEBUG_WX("GET Range\n");
+
+ return 0;
+}
+
+static int ipw2100_wx_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ static const unsigned char any[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+ static const unsigned char off[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ // sanity checks
+ if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
+ !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+ /* we disable mandatory BSSID association */
+ IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
+ priv->config &= ~CFG_STATIC_BSSID;
+ err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
+ goto done;
+ }
+
+ priv->config |= CFG_STATIC_BSSID;
+ memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
+
+ err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
+
+ IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
+ wrqu->ap_addr.sa_data[0] & 0xff,
+ wrqu->ap_addr.sa_data[1] & 0xff,
+ wrqu->ap_addr.sa_data[2] & 0xff,
+ wrqu->ap_addr.sa_data[3] & 0xff,
+ wrqu->ap_addr.sa_data[4] & 0xff,
+ wrqu->ap_addr.sa_data[5] & 0xff);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured BSSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_BSSID ||
+ priv->status & STATUS_ASSOCIATED) {
+ wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN);
+ } else
+ memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+
+ IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
+ MAC_ARG(wrqu->ap_addr.sa_data));
+ return 0;
+}
+
+static int ipw2100_wx_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ char *essid = ""; /* ANY */
+ int length = 0;
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->essid.flags && wrqu->essid.length) {
+ length = wrqu->essid.length - 1;
+ essid = extra;
+ }
+
+ if (length == 0) {
+ IPW_DEBUG_WX("Setting ESSID to ANY\n");
+ priv->config &= ~CFG_STATIC_ESSID;
+ err = ipw2100_set_essid(priv, NULL, 0, 0);
+ goto done;
+ }
+
+ length = min(length, IW_ESSID_MAX_SIZE);
+
+ priv->config |= CFG_STATIC_ESSID;
+
+ if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
+ IPW_DEBUG_WX("ESSID set to current ESSID.\n");
+ err = 0;
+ goto done;
+ }
+
+ IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
+ length);
+
+ priv->essid_len = length;
+ memcpy(priv->essid, essid, priv->essid_len);
+
+ err = ipw2100_set_essid(priv, essid, length, 0);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured ESSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_ESSID ||
+ priv->status & STATUS_ASSOCIATED) {
+ IPW_DEBUG_WX("Getting essid: '%s'\n",
+ escape_essid(priv->essid, priv->essid_len));
+ memcpy(extra, priv->essid, priv->essid_len);
+ wrqu->essid.length = priv->essid_len;
+ wrqu->essid.flags = 1; /* active */
+ } else {
+ IPW_DEBUG_WX("Getting essid: ANY\n");
+ wrqu->essid.length = 0;
+ wrqu->essid.flags = 0; /* active */
+ }
+
+ return 0;
+}
+
+static int ipw2100_wx_set_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (wrqu->data.length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick));
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, extra, wrqu->data.length);
+
+ IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
+
+ return 0;
+}
+
+static int ipw2100_wx_get_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->data.length = strlen(priv->nick) + 1;
+ memcpy(extra, priv->nick, wrqu->data.length);
+ wrqu->data.flags = 1; /* active */
+
+ IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ u32 target_rate = wrqu->bitrate.value;
+ u32 rate;
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ rate = 0;
+
+ if (target_rate == 1000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 1000000))
+ rate |= TX_RATE_1_MBIT;
+ if (target_rate == 2000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 2000000))
+ rate |= TX_RATE_2_MBIT;
+ if (target_rate == 5500000 ||
+ (!wrqu->bitrate.fixed && target_rate > 5500000))
+ rate |= TX_RATE_5_5_MBIT;
+ if (target_rate == 11000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 11000000))
+ rate |= TX_RATE_11_MBIT;
+ if (rate == 0)
+ rate = DEFAULT_TX_RATES;
+
+ err = ipw2100_set_tx_rates(priv, rate, 0);
+
+ IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+
+static int ipw2100_wx_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int val;
+ int len = sizeof(val);
+ int err = 0;
+
+ if (!(priv->status & STATUS_ENABLED) ||
+ priv->status & STATUS_RF_KILL_MASK ||
+ !(priv->status & STATUS_ASSOCIATED)) {
+ wrqu->bitrate.value = 0;
+ return 0;
+ }
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
+ if (err) {
+ IPW_DEBUG_WX("failed querying ordinals.\n");
+ return err;
+ }
+
+ switch (val & TX_RATE_MASK) {
+ case TX_RATE_1_MBIT:
+ wrqu->bitrate.value = 1000000;
+ break;
+ case TX_RATE_2_MBIT:
+ wrqu->bitrate.value = 2000000;
+ break;
+ case TX_RATE_5_5_MBIT:
+ wrqu->bitrate.value = 5500000;
+ break;
+ case TX_RATE_11_MBIT:
+ wrqu->bitrate.value = 11000000;
+ break;
+ default:
+ wrqu->bitrate.value = 0;
+ }
+
+ IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int value, err;
+
+ /* Auto RTS not yet supported */
+ if (wrqu->rts.fixed == 0)
+ return -EINVAL;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->rts.disabled)
+ value = priv->rts_threshold | RTS_DISABLED;
+ else {
+ if (wrqu->rts.value < 1 ||
+ wrqu->rts.value > 2304) {
+ err = -EINVAL;
+ goto done;
+ }
+ value = wrqu->rts.value;
+ }
+
+ err = ipw2100_set_rts_threshold(priv, value);
+
+ IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
+ wrqu->rts.fixed = 1; /* no auto select */
+
+ /* If RTS is set to the default value, then it is disabled */
+ wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
+
+ IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0, value;
+
+ if (priv->ieee->iw_mode != IW_MODE_ADHOC)
+ return -EINVAL;
+
+ if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
+ value = IPW_TX_POWER_DEFAULT;
+ else {
+ if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
+ wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
+ return -EINVAL;
+
+ value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 /
+ (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
+ }
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ err = ipw2100_set_tx_power(priv, value);
+
+ IPW_DEBUG_WX("SET TX Power -> %d \n", value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
+ wrqu->power.disabled = 1;
+ return 0;
+ }
+
+ if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
+ wrqu->power.fixed = 0;
+ wrqu->power.value = IPW_TX_POWER_MAX_DBM;
+ wrqu->power.disabled = 1;
+ } else {
+ wrqu->power.disabled = 0;
+ wrqu->power.fixed = 1;
+ wrqu->power.value =
+ (priv->tx_power *
+ (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) /
+ (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) +
+ IPW_TX_POWER_MIN_DBM;
+ }
+
+ wrqu->power.flags = IW_TXPOW_DBM;
+
+ IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (!wrqu->frag.fixed)
+ return -EINVAL;
+
+ if (wrqu->frag.disabled) {
+ priv->frag_threshold |= FRAG_DISABLED;
+ priv->ieee->fts = DEFAULT_FTS;
+ } else {
+ if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
+ wrqu->frag.value > MAX_FRAG_THRESHOLD)
+ return -EINVAL;
+
+ priv->ieee->fts = wrqu->frag.value & ~0x1;
+ priv->frag_threshold = priv->ieee->fts;
+ }
+
+ IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
+
+ return 0;
+}
+
+static int ipw2100_wx_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
+ wrqu->frag.fixed = 0; /* no auto select */
+ wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
+
+ IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
+ wrqu->retry.disabled)
+ return -EINVAL;
+
+ if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
+ return 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->retry.flags & IW_RETRY_MIN) {
+ err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+ IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
+ wrqu->retry.value);
+ goto done;
+ }
+
+ if (wrqu->retry.flags & IW_RETRY_MAX) {
+ err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+ IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
+ wrqu->retry.value);
+ goto done;
+ }
+
+ err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+ if (!err)
+ err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+
+ IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->retry.disabled = 0; /* can't be disabled */
+
+ if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
+ IW_RETRY_LIFETIME)
+ return -EINVAL;
+
+ if (wrqu->retry.flags & IW_RETRY_MAX) {
+ wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX;
+ wrqu->retry.value = priv->long_retry_limit;
+ } else {
+ wrqu->retry.flags =
+ (priv->short_retry_limit !=
+ priv->long_retry_limit) ?
+ IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT;
+
+ wrqu->retry.value = priv->short_retry_limit;
+ }
+
+ IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ IPW_DEBUG_WX("Initiating scan...\n");
+ if (ipw2100_set_scan_options(priv) ||
+ ipw2100_start_scan(priv)) {
+ IPW_DEBUG_WX("Start scan failed.\n");
+
+ /* TODO: Mark a scan as pending so when hardware initialized
+ * a scan starts */
+ }
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+}
+
+
+/*
+ * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
+ */
+static int ipw2100_wx_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ /*
+ * No check of STATUS_INITIALIZED required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->power.disabled) {
+ priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+ err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+ IPW_DEBUG_WX("SET Power Management Mode -> off\n");
+ goto done;
+ }
+
+ switch (wrqu->power.flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ break;
+ default: /* Otherwise we don't support it */
+ IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
+ wrqu->power.flags);
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
+ /* If the user hasn't specified a power management mode yet, default
+ * to BATTERY */
+ priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
+ err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
+
+ IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n",
+ priv->power_mode);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+
+}
+
+static int ipw2100_wx_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+ wrqu->power.disabled = 1;
+ } else {
+ wrqu->power.disabled = 0;
+ wrqu->power.flags = 0;
+ }
+
+ IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
+
+ return 0;
+}
+
+
+/*
+ *
+ * IWPRIV handlers
+ *
+ */
+#ifdef CONFIG_IPW2100_MONITOR
+static int ipw2100_wx_set_promisc(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int *parms = (int *)extra;
+ int enable = (parms[0] > 0);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (enable) {
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ err = ipw2100_set_channel(priv, parms[1], 0);
+ goto done;
+ }
+ priv->channel = parms[1];
+ err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+ } else {
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ err = ipw2100_switch_mode(priv, priv->last_mode);
+ }
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ if (priv->status & STATUS_INITIALIZED)
+ schedule_reset(priv);
+ return 0;
+}
+
+#endif
+
+static int ipw2100_wx_set_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0, mode = *(int *)extra;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if ((mode < 1) || (mode > POWER_MODES))
+ mode = IPW_POWER_AUTO;
+
+ if (priv->power_mode != mode)
+ err = ipw2100_set_power_mode(priv, mode);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+#define MAX_POWER_STRING 80
+static int ipw2100_wx_get_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int level = IPW_POWER_LEVEL(priv->power_mode);
+ s32 timeout, period;
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (Off)", level);
+ } else {
+ switch (level) {
+ case IPW_POWER_MODE_CAM:
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (None)", level);
+ break;
+ case IPW_POWER_AUTO:
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (Auto)", 0);
+ break;
+ default:
+ timeout = timeout_duration[level - 1] / 1000;
+ period = period_duration[level - 1] / 1000;
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d "
+ "(Timeout %dms, Period %dms)",
+ level, timeout, period);
+ }
+ }
+
+ wrqu->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+
+static int ipw2100_wx_set_preamble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err, mode = *(int *)extra;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (mode == 1)
+ priv->config |= CFG_LONG_PREAMBLE;
+ else if (mode == 0)
+ priv->config &= ~CFG_LONG_PREAMBLE;
+ else {
+ err = -EINVAL;
+ goto done;
+ }
+
+ err = ipw2100_system_config(priv, 0);
+
+done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_preamble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (priv->config & CFG_LONG_PREAMBLE)
+ snprintf(wrqu->name, IFNAMSIZ, "long (1)");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
+
+ return 0;
+}
+
+static iw_handler ipw2100_wx_handlers[] =
+{
+ NULL, /* SIOCSIWCOMMIT */
+ ipw2100_wx_get_name, /* SIOCGIWNAME */
+ NULL, /* SIOCSIWNWID */
+ NULL, /* SIOCGIWNWID */
+ ipw2100_wx_set_freq, /* SIOCSIWFREQ */
+ ipw2100_wx_get_freq, /* SIOCGIWFREQ */
+ ipw2100_wx_set_mode, /* SIOCSIWMODE */
+ ipw2100_wx_get_mode, /* SIOCGIWMODE */
+ NULL, /* SIOCSIWSENS */
+ NULL, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ ipw2100_wx_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ NULL, /* SIOCSIWSPY */
+ NULL, /* SIOCGIWSPY */
+ NULL, /* SIOCGIWTHRSPY */
+ NULL, /* SIOCWIWTHRSPY */
+ ipw2100_wx_set_wap, /* SIOCSIWAP */
+ ipw2100_wx_get_wap, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST -- depricated */
+ ipw2100_wx_set_scan, /* SIOCSIWSCAN */
+ ipw2100_wx_get_scan, /* SIOCGIWSCAN */
+ ipw2100_wx_set_essid, /* SIOCSIWESSID */
+ ipw2100_wx_get_essid, /* SIOCGIWESSID */
+ ipw2100_wx_set_nick, /* SIOCSIWNICKN */
+ ipw2100_wx_get_nick, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ ipw2100_wx_set_rate, /* SIOCSIWRATE */
+ ipw2100_wx_get_rate, /* SIOCGIWRATE */
+ ipw2100_wx_set_rts, /* SIOCSIWRTS */
+ ipw2100_wx_get_rts, /* SIOCGIWRTS */
+ ipw2100_wx_set_frag, /* SIOCSIWFRAG */
+ ipw2100_wx_get_frag, /* SIOCGIWFRAG */
+ ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
+ ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
+ ipw2100_wx_set_retry, /* SIOCSIWRETRY */
+ ipw2100_wx_get_retry, /* SIOCGIWRETRY */
+ ipw2100_wx_set_encode, /* SIOCSIWENCODE */
+ ipw2100_wx_get_encode, /* SIOCGIWENCODE */
+ ipw2100_wx_set_power, /* SIOCSIWPOWER */
+ ipw2100_wx_get_power, /* SIOCGIWPOWER */
+};
+
+#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
+#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
+#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
+#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
+#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
+#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
+
+static const struct iw_priv_args ipw2100_private_args[] = {
+
+#ifdef CONFIG_IPW2100_MONITOR
+ {
+ IPW2100_PRIV_SET_MONITOR,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"
+ },
+ {
+ IPW2100_PRIV_RESET,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"
+ },
+#endif /* CONFIG_IPW2100_MONITOR */
+
+ {
+ IPW2100_PRIV_SET_POWER,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"
+ },
+ {
+ IPW2100_PRIV_GET_POWER,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power"
+ },
+ {
+ IPW2100_PRIV_SET_LONGPREAMBLE,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"
+ },
+ {
+ IPW2100_PRIV_GET_LONGPREAMBLE,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"
+ },
+};
+
+static iw_handler ipw2100_private_handler[] = {
+#ifdef CONFIG_IPW2100_MONITOR
+ ipw2100_wx_set_promisc,
+ ipw2100_wx_reset,
+#else /* CONFIG_IPW2100_MONITOR */
+ NULL,
+ NULL,
+#endif /* CONFIG_IPW2100_MONITOR */
+ ipw2100_wx_set_powermode,
+ ipw2100_wx_get_powermode,
+ ipw2100_wx_set_preamble,
+ ipw2100_wx_get_preamble,
+};
+
+struct iw_handler_def ipw2100_wx_handler_def =
+{
+ .standard = ipw2100_wx_handlers,
+ .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+ .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+ .num_private_args = sizeof(ipw2100_private_args) /
+ sizeof(struct iw_priv_args),
+ .private = (iw_handler *)ipw2100_private_handler,
+ .private_args = (struct iw_priv_args *)ipw2100_private_args,
+};
+
+/*
+ * Get wireless statistics.
+ * Called by /proc/net/wireless
+ * Also called by SIOCGIWSTATS
+ */
+struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev)
+{
+ enum {
+ POOR = 30,
+ FAIR = 60,
+ GOOD = 80,
+ VERY_GOOD = 90,
+ EXCELLENT = 95,
+ PERFECT = 100
+ };
+ int rssi_qual;
+ int tx_qual;
+ int beacon_qual;
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_statistics *wstats;
+ u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
+ u32 ord_len = sizeof(u32);
+
+ if (!priv)
+ return (struct iw_statistics *) NULL;
+
+ wstats = &priv->wstats;
+
+ /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
+ * ipw2100_wx_wireless_stats seems to be called before fw is
+ * initialized. STATUS_ASSOCIATED will only be set if the hw is up
+ * and associated; if not associcated, the values are all meaningless
+ * anyway, so set them all to NULL and INVALID */
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ wstats->miss.beacon = 0;
+ wstats->discard.retries = 0;
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
+ IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
+ return wstats;
+ }
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
+ &missed_beacons, &ord_len))
+ goto fail_get_ordinal;
+
+ /* If we don't have a connection the quality and level is 0*/
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ } else {
+ if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
+ &rssi, &ord_len))
+ goto fail_get_ordinal;
+ wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+ if (rssi < 10)
+ rssi_qual = rssi * POOR / 10;
+ else if (rssi < 15)
+ rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
+ else if (rssi < 20)
+ rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
+ else if (rssi < 30)
+ rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
+ 10 + GOOD;
+ else
+ rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
+ 10 + VERY_GOOD;
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
+ &tx_retries, &ord_len))
+ goto fail_get_ordinal;
+
+ if (tx_retries > 75)
+ tx_qual = (90 - tx_retries) * POOR / 15;
+ else if (tx_retries > 70)
+ tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
+ else if (tx_retries > 65)
+ tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
+ else if (tx_retries > 50)
+ tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
+ 15 + GOOD;
+ else
+ tx_qual = (50 - tx_retries) *
+ (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
+
+ if (missed_beacons > 50)
+ beacon_qual = (60 - missed_beacons) * POOR / 10;
+ else if (missed_beacons > 40)
+ beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
+ 10 + POOR;
+ else if (missed_beacons > 32)
+ beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
+ 18 + FAIR;
+ else if (missed_beacons > 20)
+ beacon_qual = (32 - missed_beacons) *
+ (VERY_GOOD - GOOD) / 20 + GOOD;
+ else
+ beacon_qual = (20 - missed_beacons) *
+ (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
+
+ quality = min(beacon_qual, min(tx_qual, rssi_qual));
+
+#ifdef CONFIG_IPW_DEBUG
+ if (beacon_qual == quality)
+ IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
+ else if (tx_qual == quality)
+ IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
+ else if (quality != 100)
+ IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
+ else
+ IPW_DEBUG_WX("Quality not clamped.\n");
+#endif
+
+ wstats->qual.qual = quality;
+ wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+ }
+
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
+
+ /* FIXME: this is percent and not a # */
+ wstats->miss.beacon = missed_beacons;
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
+ &tx_failures, &ord_len))
+ goto fail_get_ordinal;
+ wstats->discard.retries = tx_failures;
+
+ return wstats;
+
+ fail_get_ordinal:
+ IPW_DEBUG_WX("failed querying ordinals.\n");
+
+ return (struct iw_statistics *) NULL;
+}
+
+void ipw2100_wx_event_work(struct ipw2100_priv *priv)
+{
+ union iwreq_data wrqu;
+ int len = ETH_ALEN;
+
+ if (priv->status & STATUS_STOPPING)
+ return;
+
+ down(&priv->action_sem);
+
+ IPW_DEBUG_WX("enter\n");
+
+ up(&priv->action_sem);
+
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Fetch BSSID from the hardware */
+ if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
+ priv->status & STATUS_RF_KILL_MASK ||
+ ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+ &priv->bssid, &len)) {
+ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+ } else {
+ /* We now have the BSSID, so can finish setting to the full
+ * associated state */
+ memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
+ memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN);
+ priv->status &= ~STATUS_ASSOCIATING;
+ priv->status |= STATUS_ASSOCIATED;
+ netif_carrier_on(priv->net_dev);
+ if (netif_queue_stopped(priv->net_dev)) {
+ IPW_DEBUG_INFO("Waking net queue.\n");
+ netif_wake_queue(priv->net_dev);
+ } else {
+ IPW_DEBUG_INFO("Starting net queue.\n");
+ netif_start_queue(priv->net_dev);
+ }
+ }
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ IPW_DEBUG_WX("Configuring ESSID\n");
+ down(&priv->action_sem);
+ /* This is a disassociation event, so kick the firmware to
+ * look for another AP */
+ if (priv->config & CFG_STATIC_ESSID)
+ ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0);
+ else
+ ipw2100_set_essid(priv, NULL, 0, 0);
+ up(&priv->action_sem);
+ }
+
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+#define IPW2100_FW_MAJOR_VERSION 1
+#define IPW2100_FW_MINOR_VERSION 3
+
+#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
+#define IPW2100_FW_MAJOR(x) (x & 0xff)
+
+#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
+ IPW2100_FW_MAJOR_VERSION)
+
+#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
+"." __stringify(IPW2100_FW_MINOR_VERSION)
+
+#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
+
+
+/*
+
+BINARY FIRMWARE HEADER FORMAT
+
+offset length desc
+0 2 version
+2 2 mode == 0:BSS,1:IBSS,2:MONITOR
+4 4 fw_len
+8 4 uc_len
+C fw_len firmware data
+12 + fw_len uc_len microcode data
+
+*/
+
+struct ipw2100_fw_header {
+ short version;
+ short mode;
+ unsigned int fw_size;
+ unsigned int uc_size;
+} __attribute__ ((packed));
+
+
+
+static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
+{
+ struct ipw2100_fw_header *h =
+ (struct ipw2100_fw_header *)fw->fw_entry->data;
+
+ if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
+ IPW_DEBUG_WARNING("Firmware image not compatible "
+ "(detected version id of %u). "
+ "See Documentation/networking/README.ipw2100\n",
+ h->version);
+ return 1;
+ }
+
+ fw->version = h->version;
+ fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
+ fw->fw.size = h->fw_size;
+ fw->uc.data = fw->fw.data + h->fw_size;
+ fw->uc.size = h->uc_size;
+
+ return 0;
+}
+
+
+int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ char *fw_name;
+ int rc;
+
+ IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
+ priv->net_dev->name);
+
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ fw_name = IPW2100_FW_NAME("-i");
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ fw_name = IPW2100_FW_NAME("-p");
+ break;
+#endif
+ case IW_MODE_INFRA:
+ default:
+ fw_name = IPW2100_FW_NAME("");
+ break;
+ }
+
+ rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
+
+ if (rc < 0) {
+ IPW_DEBUG_ERROR(
+ "%s: Firmware '%s' not available or load failed.\n",
+ priv->net_dev->name, fw_name);
+ return rc;
+ }
+ IPW_DEBUG_INFO("firmware data %p size %d\n", fw->fw_entry->data,
+ fw->fw_entry->size);
+
+ ipw2100_mod_firmware_load(fw);
+
+ return 0;
+}
+
+void ipw2100_release_firmware(struct ipw2100_priv *priv,
+ struct ipw2100_fw *fw)
+{
+ fw->version = 0;
+ if (fw->fw_entry)
+ release_firmware(fw->fw_entry);
+ fw->fw_entry = NULL;
+}
+
+
+int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+ char ver[MAX_FW_VERSION_LEN];
+ u32 len = MAX_FW_VERSION_LEN;
+ u32 tmp;
+ int i;
+ /* firmware version is an ascii string (max len of 14) */
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM,
+ ver, &len))
+ return -EIO;
+ tmp = max;
+ if (len >= max)
+ len = max - 1;
+ for (i = 0; i < len; i++)
+ buf[i] = ver[i];
+ buf[i] = '\0';
+ return tmp;
+}
+
+int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+ u32 ver;
+ u32 len = sizeof(ver);
+ /* microcode version is a 32 bit integer */
+ if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION,
+ &ver, &len))
+ return -EIO;
+ return snprintf(buf, max, "%08X", ver);
+}
+
+/*
+ * On exit, the firmware will have been freed from the fw list
+ */
+int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ /* firmware is constructed of N contiguous entries, each entry is
+ * structured as:
+ *
+ * offset sie desc
+ * 0 4 address to write to
+ * 4 2 length of data run
+ * 6 length data
+ */
+ unsigned int addr;
+ unsigned short len;
+
+ const unsigned char *firmware_data = fw->fw.data;
+ unsigned int firmware_data_left = fw->fw.size;
+
+ while (firmware_data_left > 0) {
+ addr = *(u32 *)(firmware_data);
+ firmware_data += 4;
+ firmware_data_left -= 4;
+
+ len = *(u16 *)(firmware_data);
+ firmware_data += 2;
+ firmware_data_left -= 2;
+
+ if (len > 32) {
+ IPW_DEBUG_ERROR(
+ "Invalid firmware run-length of %d bytes\n",
+ len);
+ return -EINVAL;
+ }
+
+ write_nic_memory(priv->net_dev, addr, len, firmware_data);
+ firmware_data += len;
+ firmware_data_left -= len;
+ }
+
+ return 0;
+}
+
+struct symbol_alive_response {
+ u8 cmd_id;
+ u8 seq_num;
+ u8 ucode_rev;
+ u8 eeprom_valid;
+ u16 valid_flags;
+ u8 IEEE_addr[6];
+ u16 flags;
+ u16 pcb_rev;
+ u16 clock_settle_time; // 1us LSB
+ u16 powerup_settle_time; // 1us LSB
+ u16 hop_settle_time; // 1us LSB
+ u8 date[3]; // month, day, year
+ u8 time[2]; // hours, minutes
+ u8 ucode_valid;
+};
+
+int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ struct net_device *dev = priv->net_dev;
+ const unsigned char *microcode_data = fw->uc.data;
+ unsigned int microcode_data_left = fw->uc.size;
+
+ struct symbol_alive_response response;
+ int i, j;
+ u8 data;
+
+ /* Symbol control */
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+ readl((void *)(dev->base_addr));
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+ readl((void *)(dev->base_addr));
+
+ /* HW config */
+ write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
+ readl((void *)(dev->base_addr));
+
+ /* EN_CS_ACCESS bit to reset control store pointer */
+ write_nic_byte(dev, 0x210000, 0x40);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x40);
+ readl((void *)(dev->base_addr));
+
+ /* copy microcode from buffer into Symbol */
+
+ while (microcode_data_left > 0) {
+ write_nic_byte(dev, 0x210010, *microcode_data++);
+ write_nic_byte(dev, 0x210010, *microcode_data++);
+ microcode_data_left -= 2;
+ }
+
+ /* EN_CS_ACCESS bit to reset the control store pointer */
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+
+ /* Enable System (Reg 0)
+ * first enable causes garbage in RX FIFO */
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x80);
+ readl((void *)(dev->base_addr));
+
+ /* Reset External Baseband Reg */
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+ readl((void *)(dev->base_addr));
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+ readl((void *)(dev->base_addr));
+
+ /* HW Config (Reg 5) */
+ write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
+ readl((void *)(dev->base_addr));
+
+ /* Enable System (Reg 0)
+ * second enable should be OK */
+ write_nic_byte(dev, 0x210000, 0x00); // clear enable system
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x80); // set enable system
+
+ /* check Symbol is enabled - upped this from 5 as it wasn't always
+ * catching the update */
+ for (i = 0; i < 10; i++) {
+ udelay(10);
+
+ /* check Dino is enabled bit */
+ read_nic_byte(dev, 0x210000, &data);
+ if (data & 0x1)
+ break;
+ }
+
+ if (i == 10) {
+ IPW_DEBUG_ERROR("%s: Error initializing Symbol\n",
+ dev->name);
+ return -EIO;
+ }
+
+ /* Get Symbol alive response */
+ for (i = 0; i < 30; i++) {
+ /* Read alive response structure */
+ for (j = 0;
+ j < (sizeof(struct symbol_alive_response) >> 1);
+ j++)
+ read_nic_word(dev, 0x210004,
+ ((u16 *)&response) + j);
+
+ if ((response.cmd_id == 1) &&
+ (response.ucode_valid == 0x1))
+ break;
+ udelay(10);
+ }
+
+ if (i == 30) {
+ IPW_DEBUG_ERROR("%s: No response from Symbol - hw not alive\n",
+ dev->name);
+ printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response));
+ return -EIO;
+ }
+
+ return 0;
+}
projects / deliverable / linux.git / commitdiff
