+2004-09-17 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9.
+ (CONFIG_STATUS_DEPENDENCIES): New.
+ (Makefile): Removed.
+ (config.status): Likewise.
+ * Makefile.in: Regenerated.
+
2004-09-17 Paul Brook <paul@codesourcery.com>
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add prototype.
## Process this file with automake to generate Makefile.in
-AUTOMAKE_OPTIONS = cygnus
+AUTOMAKE_OPTIONS = 1.9 cygnus
# Uncomment the following line when doing a release.
# RELEASE=y
trad-core.c \
cisco-core.c
+# We want to rerun configure if configure.in, config.bfd or
+# configure.host change. configure.in is needed since the version
+# number in Makefile comes from configure.in.
+CONFIG_STATUS_DEPENDENCIES = \
+ $(srcdir)/configure.in \
+ $(srcdir)/config.bfd \
+ $(srcdir)/configure.host
+
# These are defined by configure.in:
WORDSIZE = @wordsize@
ALL_BACKENDS = @all_backends@
rm -f $(DESTDIR)$(bfdincludedir)/symcat.h
rm -f $(DESTDIR)$(bfdincludedir)/bfdlink.h
-Makefile: $(srcdir)/configure.in
-
# Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
DEP: dep.sed $(CFILES) $(HFILES) bfd.h
rm -f DEP1
DISTCLEANFILES = $(BUILD_CFILES) $(BUILD_HFILES)
-# We want to rerun configure if configure, config.bfd or configure.host change.
-config.status: $(srcdir)/configure $(srcdir)/config.bfd $(srcdir)/configure.host
- $(SHELL) ./config.status --recheck
-
bfdver.h: $(srcdir)/version.h $(srcdir)/Makefile.in
@echo "creating $@"
@bfd_version=`echo "$(VERSION)" | sed -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\
target_vendor = @target_vendor@
tdefaults = @tdefaults@
wordsize = @wordsize@
-AUTOMAKE_OPTIONS = cygnus
+AUTOMAKE_OPTIONS = 1.9 cygnus
# Uncomment the following line when doing a release.
# RELEASE=y
cisco-core.c
+# We want to rerun configure if configure.in, config.bfd or
+# configure.host change. configure.in is needed since the version
+# number in Makefile comes from configure.in.
+CONFIG_STATUS_DEPENDENCIES = \
+ $(srcdir)/configure.in \
+ $(srcdir)/config.bfd \
+ $(srcdir)/configure.host
+
+
# These are defined by configure.in:
WORDSIZE = @wordsize@
ALL_BACKENDS = @all_backends@
cd $(top_srcdir) && \
$(AUTOMAKE) --cygnus Makefile
.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
rm -f $(DESTDIR)$(bfdincludedir)/symcat.h
rm -f $(DESTDIR)$(bfdincludedir)/bfdlink.h
-Makefile: $(srcdir)/configure.in
-
# Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
DEP: dep.sed $(CFILES) $(HFILES) bfd.h
rm -f DEP1
$(SHELL) $(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
touch stmp-lcoff-h
-# We want to rerun configure if configure, config.bfd or configure.host change.
-config.status: $(srcdir)/configure $(srcdir)/config.bfd $(srcdir)/configure.host
- $(SHELL) ./config.status --recheck
-
bfdver.h: $(srcdir)/version.h $(srcdir)/Makefile.in
@echo "creating $@"
@bfd_version=`echo "$(VERSION)" | sed -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\
+2004-09-17 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9.
+ (CONFIG_STATUS_DEPENDENCIES): New.
+ (Makefile): Removed.
+ (config.status): Likewise.
+ * Makefile.in: Regenerated.
+
2004-09-17 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Run "make dep-am".
## Process this file with automake to generate Makefile.in
-AUTOMAKE_OPTIONS = cygnus
+AUTOMAKE_OPTIONS = 1.9 cygnus
SUBDIRS = po
OFILES = @BFD_MACHINES@
+# We should reconfigure whenever bfd/configure.in changes, because
+# that's where the version number in Makefile comes from.
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+
INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl
disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h
for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
-# We should reconfigure whenever bfd/configure.in changes, because
-# that's where the version number comes from.
-config.status: $(srcdir)/configure $(srcdir)/../bfd/configure.in
- $(SHELL) ./config.status --recheck
-
install-bfdlibLTLIBRARIES: @INSTALL_LIBBFD_TRUE@install_libopcodes
@$(NORMAL_INSTALL)
sh-dis.lo: sh-dis.c
$(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $<
-Makefile: $(BFDDIR)/configure.in
-
# This dependency stuff is copied from BFD.
DEP: dep.sed $(CFILES) $(HFILES) config.h
target_noncanonical = @target_noncanonical@
target_os = @target_os@
target_vendor = @target_vendor@
-AUTOMAKE_OPTIONS = cygnus
+AUTOMAKE_OPTIONS = 1.9 cygnus
SUBDIRS = po
INCDIR = $(srcdir)/../include
BFDDIR = $(srcdir)/../bfd
z8k-dis.lo
OFILES = @BFD_MACHINES@
+
+# We should reconfigure whenever bfd/configure.in changes, because
+# that's where the version number in Makefile comes from.
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl
libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c
# It's desirable to list ../bfd/libbfd.la in DEPENDENCIES and LIBADD.
cd $(top_srcdir) && \
$(AUTOMAKE) --cygnus Makefile
.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
-# We should reconfigure whenever bfd/configure.in changes, because
-# that's where the version number comes from.
-config.status: $(srcdir)/configure $(srcdir)/../bfd/configure.in
- $(SHELL) ./config.status --recheck
-
install-bfdlibLTLIBRARIES: @INSTALL_LIBBFD_TRUE@install_libopcodes
@$(NORMAL_INSTALL)
sh-dis.lo: sh-dis.c
$(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $<
-Makefile: $(BFDDIR)/configure.in
-
# This dependency stuff is copied from BFD.
DEP: dep.sed $(CFILES) $(HFILES) config.h