coff-h8300.c
coff-h8500.c
coff-i386.c
+coff-i386lynx.c
coff-i960.c
coff-m68k.c
coff-m88k.c
+Fri Oct 1 13:14:17 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * configure.in: i386lynx_coff_vec requires coff-i386lynx.o.
+ * coff-i386lynx.c: New file, defines Lynx target vector and name,
+ includes coff-i386.c.
+ * coff-i386.c (i386coff_vec): Allow redefinition of target vector
+ symbol and name, if TARGET_SYM and/or TARGET_NAME are defined.
+ * i386lynx.c: Remove coff vector definition entirely.
+ (lynx_32_swap_ext_reloc_in): Define.
+ (lynx_32_swap_std_reloc_in): Define, get reloc bits in i386
+ Lynx-specific way.
+ (lynx_32_swap_ext_reloc_out): Define.
+ (lynx_32_swap_std_reloc_out): Define.
+ (lynx_32_slurp_reloc_table): Define, call Lynx swapping fns.
+ (lynx_32_squirt_out_relocs): Define, call Lynx swapping fns.
+ (lynx_32_canonicalize_reloc): Define, call Lynx swapping fns.
+ (WRITE_HEADERS): Define, call Lynx swapping fns.
+
+ * config/i386-lynx.mt (SELECT_VECS): Remove redundant vector.
+
Thu Sep 30 17:50:52 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* reloc.c (bfd_reloc_code_type): Add linkage-table relative
relocations of size 8, 16, 32. Sort generic relocs by type rather
than size. Added a little documentation too.
+ * aoutx.h (howto_table_std): Add BASE16 and BASE32 relocs.
+ (TABLE_SIZE): New macro.
+ (reloc_type_lookup): Handle BFD_RELOC_{16,32}_BASEREL for std
+ relocs.
+ (swap_std_reloc_out): Write baserel relocs correctly.
+ (swap_std_reloc_in): Handle r_baserel field. Assert that
+ r_jmptable and r_relative fields are clear, and that the computed
+ index does refer to a defined entry of the howto table.
+
Tue Sep 28 14:47:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* section.c (bfd_make_section_anyway): New function.
/* BFD back-end for Intel 386 COFF files.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
#include "coff/internal.h"
#include "libcoff.h"
+static bfd_reloc_status_type coff_i386_reloc PARAMS ((bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ PTR data,
+ asection *input_section,
+ bfd *output_bfd));
+
+/* For some reason when using i386 COFF the value stored in the .text
+ section for a reference to a common symbol is the value itself plus
+ any desired offset. Ian Taylor, Cygnus Support. */
+
+/* If we are producing relocateable output, we need to do some
+ adjustments to the object file that are not done by the
+ bfd_perform_relocation function. This function is called by every
+ reloc type to make any required adjustments. */
+
+static bfd_reloc_status_type
+coff_i386_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd)
+ bfd *abfd;
+ arelent *reloc_entry;
+ asymbol *symbol;
+ PTR data;
+ asection *input_section;
+ bfd *output_bfd;
+{
+ symvalue diff;
+
+ if (output_bfd == (bfd *) NULL)
+ return bfd_reloc_continue;
+
+ if (bfd_is_com_section (symbol->section))
+ {
+ /* We are relocating a common symbol. The current value in the
+ object file is ORIG + OFFSET, where ORIG is the value of the
+ common symbol as seen by the object file when it was compiled
+ (this may be zero if the symbol was undefined) and OFFSET is
+ the offset into the common symbol (normally zero, but may be
+ non-zero when referring to a field in a common structure).
+ ORIG is the negative of reloc_entry->addend, which is set by
+ the CALC_ADDEND macro below. We want to replace the value in
+ the object file with NEW + OFFSET, where NEW is the value of
+ the common symbol which we are going to put in the final
+ object file. NEW is symbol->value. */
+ diff = symbol->value + reloc_entry->addend;
+ }
+ else
+ {
+ /* For some reason bfd_perform_relocation always effectively
+ ignores the addend for a COFF target when producing
+ relocateable output. This seems to be always wrong for 386
+ COFF, so we handle the addend here instead. */
+ diff = reloc_entry->addend;
+ }
+
+#define DOIT(x) \
+ x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+
+ if (diff != 0)
+ {
+ reloc_howto_type *howto = reloc_entry->howto;
+ unsigned char *addr = (unsigned char *) data + reloc_entry->address;
+
+ switch (howto->size)
+ {
+ case 0:
+ {
+ char x = bfd_get_8 (abfd, addr);
+ DOIT (x);
+ bfd_put_8 (abfd, x, addr);
+ }
+ break;
+
+ case 1:
+ {
+ short x = bfd_get_16 (abfd, addr);
+ DOIT (x);
+ bfd_put_16 (abfd, x, addr);
+ }
+ break;
+
+ case 2:
+ {
+ long x = bfd_get_32 (abfd, addr);
+ DOIT (x);
+ bfd_put_32 (abfd, x, addr);
+ }
+ break;
+
+ default:
+ abort ();
+ }
+ }
+
+ /* Now let bfd_perform_relocation finish everything up. */
+ return bfd_reloc_continue;
+}
static reloc_howto_type howto_table[] =
{
- {0},
- {1},
- {2},
- {3},
- {4},
- {5},
- HOWTO(R_DIR32, 0, 2, 32, false, 0, true,true,0,"dir32", true, 0xffffffff,0xffffffff, false),
- {7},
- {010},
- {011},
- {012},
- {013},
- {014},
- {015},
- {016},
- HOWTO(R_RELBYTE, 0, 0, 8, false, 0, true, true,0,"8", true, 0x000000ff,0x000000ff, false),
- HOWTO(R_RELWORD, 0, 1, 16, false, 0, true, true,0,"16", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_RELLONG, 0, 2, 32, false, 0, true, true,0,"32", true, 0xffffffff,0xffffffff, false),
- HOWTO(R_PCRBYTE, 0, 0, 8, true, 0, false, true,0,"DISP8", true, 0x000000ff,0x000000ff, false),
- HOWTO(R_PCRWORD, 0, 1, 16, true, 0, false, true,0,"DISP16", true, 0x0000ffff,0x0000ffff, false),
- HOWTO(R_PCRLONG, 0, 2, 32, true, 0, false, true,0,"DISP32", true, 0xffffffff,0xffffffff, false),
+ {0},
+ {1},
+ {2},
+ {3},
+ {4},
+ {5},
+ HOWTO (R_DIR32, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "dir32", /* name */
+ true, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ false), /* pcrel_offset */
+ {7},
+ {010},
+ {011},
+ {012},
+ {013},
+ {014},
+ {015},
+ {016},
+ HOWTO (R_RELBYTE, /* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "8", /* name */
+ true, /* partial_inplace */
+ 0x000000ff, /* src_mask */
+ 0x000000ff, /* dst_mask */
+ false), /* pcrel_offset */
+ HOWTO (R_RELWORD, /* type */
+ 0, /* rightshift */
+ 1, /* size (0 = byte, 1 = short, 2 = long) */
+ 16, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "16", /* name */
+ true, /* partial_inplace */
+ 0x0000ffff, /* src_mask */
+ 0x0000ffff, /* dst_mask */
+ false), /* pcrel_offset */
+ HOWTO (R_RELLONG, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "32", /* name */
+ true, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ false), /* pcrel_offset */
+ HOWTO (R_PCRBYTE, /* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ true, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_signed, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "DISP8", /* name */
+ true, /* partial_inplace */
+ 0x000000ff, /* src_mask */
+ 0x000000ff, /* dst_mask */
+ false), /* pcrel_offset */
+ HOWTO (R_PCRWORD, /* type */
+ 0, /* rightshift */
+ 1, /* size (0 = byte, 1 = short, 2 = long) */
+ 16, /* bitsize */
+ true, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_signed, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "DISP16", /* name */
+ true, /* partial_inplace */
+ 0x0000ffff, /* src_mask */
+ 0x0000ffff, /* dst_mask */
+ false), /* pcrel_offset */
+ HOWTO (R_PCRLONG, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ true, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_signed, /* complain_on_overflow */
+ coff_i386_reloc, /* special_function */
+ "DISP32", /* name */
+ true, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ false) /* pcrel_offset */
};
/* Turn a howto into a reloc nunmber */
#define RTYPE2HOWTO(cache_ptr, dst) \
cache_ptr->howto = howto_table + (dst)->r_type;
-#include "coffcode.h"
+/* On SCO Unix 3.2.2 the native assembler generates two .data
+ sections. We handle that by renaming the second one to .data2. It
+ does no harm to do this for any 386 COFF target. */
+#define TWO_DATA_SECS
+
+/* For 386 COFF a STYP_NOLOAD | STYP_BSS section is part of a shared
+ library. On some other COFF targets STYP_BSS is normally
+ STYP_NOLOAD. */
+#define BSS_NOLOAD_IS_SHARED_LIBRARY
-#define coff_write_armap bsd_write_armap
+/* Compute the addend of a reloc. If the reloc is to a common symbol,
+ the object file contains the value of the common symbol. By the
+ time this is called, the linker may be using a different symbol
+ from a different object file with a different value. Therefore, we
+ hack wildly to locate the original symbol from this file so that we
+ can make the correct adjustment. This macro sets coffsym to the
+ symbol from the original file, and uses it to set the addend value
+ correctly. If this is not a common symbol, the usual addend
+ calculation is done, except that an additional tweak is needed for
+ PC relative relocs.
+ FIXME: This macro refers to symbols and asect; these are from the
+ calling function, not the macro arguments. */
+
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr) \
+ { \
+ coff_symbol_type *coffsym = (coff_symbol_type *) NULL; \
+ if (ptr && bfd_asymbol_bfd (ptr) != abfd) \
+ coffsym = (obj_symbols (abfd) \
+ + (cache_ptr->sym_ptr_ptr - symbols)); \
+ else if (ptr) \
+ coffsym = coff_symbol_from (abfd, ptr); \
+ if (coffsym != (coff_symbol_type *) NULL \
+ && coffsym->native->u.syment.n_scnum == 0) \
+ cache_ptr->addend = - coffsym->native->u.syment.n_value; \
+ else if (ptr && bfd_asymbol_bfd (ptr) == abfd \
+ && ptr->section != (asection *) NULL) \
+ cache_ptr->addend = - (ptr->section->vma + ptr->value); \
+ else \
+ cache_ptr->addend = 0; \
+ if (ptr && howto_table[reloc.r_type].pc_relative) \
+ cache_ptr->addend += asect->vma; \
+ }
+
+#include "coffcode.h"
bfd_target *i3coff_object_p(a)
bfd *a ;
{ return coff_object_p(a); }
-bfd_target i386coff_vec =
+bfd_target
+#ifdef TARGET_SYM
+ TARGET_SYM =
+#else
+ i386coff_vec =
+#endif
{
+#ifdef TARGET_NAME
+ TARGET_NAME,
+#else
"coff-i386", /* name */
+#endif
bfd_target_coff_flavour,
false, /* data byte order is little */
false, /* header byte order is little */
15, /* ar_max_namelen */
2, /* minimum alignment power */
- _do_getl64, _do_putl64, _do_getl32, _do_putl32, _do_getl16, _do_putl16, /* data */
- _do_getl64, _do_putl64, _do_getl32, _do_putl32, _do_getl16, _do_putl16, /* hdrs */
+ bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+ bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+ bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
+ bfd_getl64, bfd_getl_signed_64, bfd_putl64,
+ bfd_getl32, bfd_getl_signed_32, bfd_putl32,
+ bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
/* Note that we allow an object file to be treated as a core file as well. */
{_bfd_dummy_target, i3coff_object_p, /* bfd_check_format */
_bfd_write_archive_contents, bfd_false},
JUMP_TABLE(coff),
- COFF_SWAP_TABLE
- };
+ COFF_SWAP_TABLE,
+};
--- /dev/null
+/* BFD back-end for Intel 386 COFF LynxOS files.
+ Copyright 1993 Free Software Foundation, Inc.
+ Written by Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#define TARGET_SYM i386lynx_coff_vec
+#define TARGET_NAME "coff-i386-lynx"
+
+#include "coff-i386.c"
do
bfd_target=`$srcdir/config.bfd $targ`
- case "$targ" in
- netbsd386) bfd_target=i386-netbsd ;;
- esac
-
if [ "x$bfd_target" = "xall" ]; then
all_targets=true
else
netbsd386_vec) tb="$tb netbsd386.o aout32.o stab-syms.o" ;;
i386coff_vec) tb="$tb coff-i386.o" ;;
i386linux_vec) tb="$tb i386linux.o aout32.o stab-syms.o" ;;
- i386lynx_vec) tb="$tb i386lynx.o aout32.o stab-syms.o" ;;
+ i386lynx_aout_vec) tb="$tb i386lynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ i386lynx_coff_vec) tb="$tb coff-i386lynx.o lynx-core.o stab-syms.o" ;;
icoff_big_vec) tb="$tb coff-i960.o" ;;
icoff_little_vec) tb="$tb coff-i960.o" ;;
ieee_vec) tb="$tb ieee.o" ;;
m68kcoff_vec) tb="$tb coff-m68k.o" ;;
m68kcoffun_vec) tb="$tb coff-u68k.o coff-m68k.o" ;;
+ m68klynx_aout_vec) tb="$tb m68klynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ m68klynx_coff_vec) tb="$tb m68klynx.o lynx-core.o aout32.o stab-syms.o" ;;
m88kbcs_vec) tb="$tb coff-m88k.o" ;;
newsos3_vec) tb="$tb newsos3.o aout32.o stab-syms.o" ;;
nlm32_big_generic_vec) tb="$tb nlm32-gen.o nlm32.o nlm.o" ;;
--- /dev/null
+/* BFD back-end for i386 a.out binaries under Lynx.
+ Copyright (C) 1990, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#define BYTES_IN_WORD 4
+#define ARCH 32
+#define N_SHARED_LIB(x) 0
+
+#define TEXT_START_ADDR 0
+#define PAGE_SIZE 4096
+#define SEGMENT_SIZE PAGE_SIZE
+#define DEFAULT_ARCH bfd_arch_i386
+
+#define MY(OP) CAT(i386lynx_aout_,OP)
+#define TARGETNAME "a.out-i386-lynx"
+
+#include "bfd.h"
+#include "sysdep.h"
+#include "libbfd.h"
+
+#ifndef WRITE_HEADERS
+#define WRITE_HEADERS(abfd, execp) \
+ { \
+ bfd_size_type text_size; /* dummy vars */ \
+ file_ptr text_end; \
+ if (adata(abfd).magic == undecided_magic) \
+ NAME(aout,adjust_sizes_and_vmas) (abfd, &text_size, &text_end); \
+ \
+ execp->a_syms = bfd_get_symcount (abfd) * EXTERNAL_NLIST_SIZE; \
+ execp->a_entry = bfd_get_start_address (abfd); \
+ \
+ execp->a_trsize = ((obj_textsec (abfd)->reloc_count) * \
+ obj_reloc_entry_size (abfd)); \
+ execp->a_drsize = ((obj_datasec (abfd)->reloc_count) * \
+ obj_reloc_entry_size (abfd)); \
+ NAME(aout,swap_exec_header_out) (abfd, execp, &exec_bytes); \
+ \
+ bfd_seek (abfd, (file_ptr) 0, SEEK_SET); \
+ bfd_write ((PTR) &exec_bytes, 1, EXEC_BYTES_SIZE, abfd); \
+ /* Now write out reloc info, followed by syms and strings */ \
+ \
+ if (bfd_get_symcount (abfd) != 0) \
+ { \
+ bfd_seek (abfd, (file_ptr)(N_SYMOFF(*execp)), SEEK_SET); \
+ \
+ NAME(aout,write_syms)(abfd); \
+ \
+ bfd_seek (abfd, (file_ptr)(N_TRELOFF(*execp)), SEEK_SET); \
+ \
+ if (!NAME(lynx,squirt_out_relocs) (abfd, obj_textsec (abfd))) return false; \
+ bfd_seek (abfd, (file_ptr)(N_DRELOFF(*execp)), SEEK_SET); \
+ \
+ if (!NAME(lynx,squirt_out_relocs)(abfd, obj_datasec (abfd))) return false; \
+ } \
+ }
+#endif
+
+#include "libaout.h"
+#include "aout/aout64.h"
+
+#ifdef HOST_LYNX
+
+char *lynx_core_file_failing_command();
+int lynx_core_file_failing_signal();
+boolean lynx_core_file_matches_executable_p();
+bfd_target *lynx_core_file_p();
+
+#define MY_core_file_failing_command lynx_core_file_failing_command
+#define MY_core_file_failing_signal lynx_core_file_failing_signal
+#define MY_core_file_matches_executable_p lynx_core_file_matches_executable_p
+#define MY_core_file_p lynx_core_file_p
+
+#endif /* HOST_LYNX */
+
+\f
+#define KEEPIT flags
+
+extern reloc_howto_type aout_32_ext_howto_table[];
+extern reloc_howto_type aout_32_std_howto_table[];
+
+/* Standard reloc stuff */
+/* Output standard relocation information to a file in target byte order. */
+
+void
+DEFUN(NAME(lynx,swap_std_reloc_out),(abfd, g, natptr),
+ bfd *abfd AND
+ arelent *g AND
+ struct reloc_std_external *natptr)
+{
+ int r_index;
+ asymbol *sym = *(g->sym_ptr_ptr);
+ int r_extern;
+ unsigned int r_length;
+ int r_pcrel;
+ int r_baserel, r_jmptable, r_relative;
+ unsigned int r_addend;
+ asection *output_section = sym->section->output_section;
+
+ PUT_WORD(abfd, g->address, natptr->r_address);
+
+ r_length = g->howto->size ; /* Size as a power of two */
+ r_pcrel = (int) g->howto->pc_relative; /* Relative to PC? */
+ /* r_baserel, r_jmptable, r_relative??? FIXME-soon */
+ r_baserel = 0;
+ r_jmptable = 0;
+ r_relative = 0;
+
+ r_addend = g->addend + (*(g->sym_ptr_ptr))->section->output_section->vma;
+
+ /* name was clobbered by aout_write_syms to be symbol index */
+
+ /* If this relocation is relative to a symbol then set the
+ r_index to the symbols index, and the r_extern bit.
+
+ Absolute symbols can come in in two ways, either as an offset
+ from the abs section, or as a symbol which has an abs value.
+ check for that here
+ */
+
+
+ if (bfd_is_com_section (output_section)
+ || output_section == &bfd_abs_section
+ || output_section == &bfd_und_section)
+ {
+ if (bfd_abs_section.symbol == sym)
+ {
+ /* Whoops, looked like an abs symbol, but is really an offset
+ from the abs section */
+ r_index = 0;
+ r_extern = 0;
+ }
+ else
+ {
+ /* Fill in symbol */
+ r_extern = 1;
+ r_index = stoi((*(g->sym_ptr_ptr))->KEEPIT);
+
+ }
+ }
+ else
+ {
+ /* Just an ordinary section */
+ r_extern = 0;
+ r_index = output_section->target_index;
+ }
+
+ /* now the fun stuff */
+ if (abfd->xvec->header_byteorder_big_p != false) {
+ natptr->r_index[0] = r_index >> 16;
+ natptr->r_index[1] = r_index >> 8;
+ natptr->r_index[2] = r_index;
+ natptr->r_type[0] =
+ (r_extern? RELOC_STD_BITS_EXTERN_BIG: 0)
+ | (r_pcrel? RELOC_STD_BITS_PCREL_BIG: 0)
+ | (r_baserel? RELOC_STD_BITS_BASEREL_BIG: 0)
+ | (r_jmptable? RELOC_STD_BITS_JMPTABLE_BIG: 0)
+ | (r_relative? RELOC_STD_BITS_RELATIVE_BIG: 0)
+ | (r_length << RELOC_STD_BITS_LENGTH_SH_BIG);
+ } else {
+ natptr->r_index[2] = r_index >> 16;
+ natptr->r_index[1] = r_index >> 8;
+ natptr->r_index[0] = r_index;
+ natptr->r_type[0] =
+ (r_extern? RELOC_STD_BITS_EXTERN_LITTLE: 0)
+ | (r_pcrel? RELOC_STD_BITS_PCREL_LITTLE: 0)
+ | (r_baserel? RELOC_STD_BITS_BASEREL_LITTLE: 0)
+ | (r_jmptable? RELOC_STD_BITS_JMPTABLE_LITTLE: 0)
+ | (r_relative? RELOC_STD_BITS_RELATIVE_LITTLE: 0)
+ | (r_length << RELOC_STD_BITS_LENGTH_SH_LITTLE);
+ }
+}
+
+
+/* Extended stuff */
+/* Output extended relocation information to a file in target byte order. */
+
+void
+DEFUN(NAME(lynx,swap_ext_reloc_out),(abfd, g, natptr),
+ bfd *abfd AND
+ arelent *g AND
+ register struct reloc_ext_external *natptr)
+{
+ int r_index;
+ int r_extern;
+ unsigned int r_type;
+ unsigned int r_addend;
+ asymbol *sym = *(g->sym_ptr_ptr);
+ asection *output_section = sym->section->output_section;
+
+ PUT_WORD (abfd, g->address, natptr->r_address);
+
+ r_type = (unsigned int) g->howto->type;
+
+ r_addend = g->addend + (*(g->sym_ptr_ptr))->section->output_section->vma;
+
+
+ /* If this relocation is relative to a symbol then set the
+ r_index to the symbols index, and the r_extern bit.
+
+ Absolute symbols can come in in two ways, either as an offset
+ from the abs section, or as a symbol which has an abs value.
+ check for that here
+ */
+
+ if (bfd_is_com_section (output_section)
+ || output_section == &bfd_abs_section
+ || output_section == &bfd_und_section)
+ {
+ if (bfd_abs_section.symbol == sym)
+ {
+ /* Whoops, looked like an abs symbol, but is really an offset
+ from the abs section */
+ r_index = 0;
+ r_extern = 0;
+ }
+ else
+ {
+ r_extern = 1;
+ r_index = stoi((*(g->sym_ptr_ptr))->KEEPIT);
+ }
+ }
+ else
+ {
+ /* Just an ordinary section */
+ r_extern = 0;
+ r_index = output_section->target_index;
+ }
+
+
+ /* now the fun stuff */
+ if (abfd->xvec->header_byteorder_big_p != false) {
+ natptr->r_index[0] = r_index >> 16;
+ natptr->r_index[1] = r_index >> 8;
+ natptr->r_index[2] = r_index;
+ natptr->r_type[0] =
+ (r_extern? RELOC_EXT_BITS_EXTERN_BIG: 0)
+ | (r_type << RELOC_EXT_BITS_TYPE_SH_BIG);
+ } else {
+ natptr->r_index[2] = r_index >> 16;
+ natptr->r_index[1] = r_index >> 8;
+ natptr->r_index[0] = r_index;
+ natptr->r_type[0] =
+ (r_extern? RELOC_EXT_BITS_EXTERN_LITTLE: 0)
+ | (r_type << RELOC_EXT_BITS_TYPE_SH_LITTLE);
+ }
+
+ PUT_WORD (abfd, r_addend, natptr->r_addend);
+}
+
+/* BFD deals internally with all things based from the section they're
+ in. so, something in 10 bytes into a text section with a base of
+ 50 would have a symbol (.text+10) and know .text vma was 50.
+
+ Aout keeps all it's symbols based from zero, so the symbol would
+ contain 60. This macro subs the base of each section from the value
+ to give the true offset from the section */
+
+
+#define MOVE_ADDRESS(ad) \
+ if (r_extern) { \
+ /* undefined symbol */ \
+ cache_ptr->sym_ptr_ptr = symbols + r_index; \
+ cache_ptr->addend = ad; \
+ } else { \
+ /* defined, section relative. replace symbol with pointer to \
+ symbol which points to section */ \
+ switch (r_index) { \
+ case N_TEXT: \
+ case N_TEXT | N_EXT: \
+ cache_ptr->sym_ptr_ptr = obj_textsec(abfd)->symbol_ptr_ptr; \
+ cache_ptr->addend = ad - su->textsec->vma; \
+ break; \
+ case N_DATA: \
+ case N_DATA | N_EXT: \
+ cache_ptr->sym_ptr_ptr = obj_datasec(abfd)->symbol_ptr_ptr; \
+ cache_ptr->addend = ad - su->datasec->vma; \
+ break; \
+ case N_BSS: \
+ case N_BSS | N_EXT: \
+ cache_ptr->sym_ptr_ptr = obj_bsssec(abfd)->symbol_ptr_ptr; \
+ cache_ptr->addend = ad - su->bsssec->vma; \
+ break; \
+ default: \
+ case N_ABS: \
+ case N_ABS | N_EXT: \
+ cache_ptr->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr; \
+ cache_ptr->addend = ad; \
+ break; \
+ } \
+ } \
+
+void
+DEFUN(NAME(lynx,swap_ext_reloc_in), (abfd, bytes, cache_ptr, symbols),
+ bfd *abfd AND
+ struct reloc_ext_external *bytes AND
+ arelent *cache_ptr AND
+ asymbol **symbols)
+{
+ int r_index;
+ int r_extern;
+ unsigned int r_type;
+ struct aoutdata *su = &(abfd->tdata.aout_data->a);
+
+ cache_ptr->address = (GET_SWORD (abfd, bytes->r_address));
+
+ /* now the fun stuff */
+ if (1 /* abfd->xvec->header_byteorder_big_p != false */) {
+ r_index = (bytes->r_index[0] << 16)
+ | (bytes->r_index[1] << 8)
+ | bytes->r_index[2];
+ r_extern = (0 != (bytes->r_type[0] & RELOC_EXT_BITS_EXTERN_BIG));
+ r_type = (bytes->r_type[0] & RELOC_EXT_BITS_TYPE_BIG)
+ >> RELOC_EXT_BITS_TYPE_SH_BIG;
+ } else {
+ r_index = (bytes->r_index[2] << 16)
+ | (bytes->r_index[1] << 8)
+ | bytes->r_index[0];
+ r_extern = (0 != (bytes->r_type[0] & RELOC_EXT_BITS_EXTERN_LITTLE));
+ r_type = (bytes->r_type[0] & RELOC_EXT_BITS_TYPE_LITTLE)
+ >> RELOC_EXT_BITS_TYPE_SH_LITTLE;
+ }
+
+ cache_ptr->howto = aout_32_ext_howto_table + r_type;
+ MOVE_ADDRESS(GET_SWORD(abfd, bytes->r_addend));
+}
+
+void
+DEFUN(NAME(lynx,swap_std_reloc_in), (abfd, bytes, cache_ptr, symbols),
+ bfd *abfd AND
+ struct reloc_std_external *bytes AND
+ arelent *cache_ptr AND
+ asymbol **symbols)
+{
+ char tmp;
+ int r_index;
+ int r_extern;
+ unsigned int r_length;
+ int r_pcrel;
+ int r_baserel, r_jmptable, r_relative;
+ struct aoutdata *su = &(abfd->tdata.aout_data->a);
+
+ cache_ptr->address = bfd_h_get_32 (abfd, bytes->r_address);
+
+ r_index = (bytes->r_type[0] << 16)
+ | (bytes->r_index[2] << 8)
+ | bytes->r_index[1];
+ r_extern = (0 != (bytes->r_index[0] & RELOC_STD_BITS_EXTERN_BIG));
+ r_pcrel = (0 != (bytes->r_index[0] & RELOC_STD_BITS_PCREL_BIG));
+ r_baserel = (0 != (bytes->r_index[0] & RELOC_STD_BITS_BASEREL_BIG));
+ r_jmptable= (0 != (bytes->r_index[0] & RELOC_STD_BITS_JMPTABLE_BIG));
+ r_relative= (0 != (bytes->r_index[0] & RELOC_STD_BITS_RELATIVE_BIG));
+ r_length = (bytes->r_index[0] & RELOC_STD_BITS_LENGTH_BIG)
+ >> RELOC_STD_BITS_LENGTH_SH_BIG;
+
+ cache_ptr->howto = aout_32_std_howto_table + r_length + 4 * r_pcrel;
+ /* FIXME-soon: Roll baserel, jmptable, relative bits into howto setting */
+
+ MOVE_ADDRESS(0);
+}
+
+/* Reloc hackery */
+
+boolean
+DEFUN(NAME(lynx,slurp_reloc_table),(abfd, asect, symbols),
+ bfd *abfd AND
+ sec_ptr asect AND
+ asymbol **symbols)
+{
+ unsigned int count;
+ bfd_size_type reloc_size;
+ PTR relocs;
+ arelent *reloc_cache;
+ size_t each_size;
+
+ if (asect->relocation) return true;
+
+ if (asect->flags & SEC_CONSTRUCTOR) return true;
+
+ if (asect == obj_datasec (abfd)) {
+ reloc_size = exec_hdr(abfd)->a_drsize;
+ goto doit;
+ }
+
+ if (asect == obj_textsec (abfd)) {
+ reloc_size = exec_hdr(abfd)->a_trsize;
+ goto doit;
+ }
+
+ bfd_error = invalid_operation;
+ return false;
+
+ doit:
+ bfd_seek (abfd, asect->rel_filepos, SEEK_SET);
+ each_size = obj_reloc_entry_size (abfd);
+
+ count = reloc_size / each_size;
+
+
+ reloc_cache = (arelent *) bfd_zalloc (abfd, (size_t)(count * sizeof
+ (arelent)));
+ if (!reloc_cache) {
+nomem:
+ bfd_error = no_memory;
+ return false;
+ }
+
+ relocs = (PTR) bfd_alloc (abfd, reloc_size);
+ if (!relocs) {
+ bfd_release (abfd, reloc_cache);
+ goto nomem;
+ }
+
+ if (bfd_read (relocs, 1, reloc_size, abfd) != reloc_size) {
+ bfd_release (abfd, relocs);
+ bfd_release (abfd, reloc_cache);
+ bfd_error = system_call_error;
+ return false;
+ }
+
+ if (each_size == RELOC_EXT_SIZE) {
+ register struct reloc_ext_external *rptr = (struct reloc_ext_external *) relocs;
+ unsigned int counter = 0;
+ arelent *cache_ptr = reloc_cache;
+
+ for (; counter < count; counter++, rptr++, cache_ptr++) {
+ NAME(lynx,swap_ext_reloc_in)(abfd, rptr, cache_ptr, symbols);
+ }
+ } else {
+ register struct reloc_std_external *rptr = (struct reloc_std_external*) relocs;
+ unsigned int counter = 0;
+ arelent *cache_ptr = reloc_cache;
+
+ for (; counter < count; counter++, rptr++, cache_ptr++) {
+ NAME(lynx,swap_std_reloc_in)(abfd, rptr, cache_ptr, symbols);
+ }
+
+ }
+
+ bfd_release (abfd,relocs);
+ asect->relocation = reloc_cache;
+ asect->reloc_count = count;
+ return true;
+}
+
+
+
+/* Write out a relocation section into an object file. */
+
+boolean
+DEFUN(NAME(lynx,squirt_out_relocs),(abfd, section),
+ bfd *abfd AND
+ asection *section)
+{
+ arelent **generic;
+ unsigned char *native, *natptr;
+ size_t each_size;
+
+ unsigned int count = section->reloc_count;
+ size_t natsize;
+
+ if (count == 0) return true;
+
+ each_size = obj_reloc_entry_size (abfd);
+ natsize = each_size * count;
+ native = (unsigned char *) bfd_zalloc (abfd, natsize);
+ if (!native) {
+ bfd_error = no_memory;
+ return false;
+ }
+
+ generic = section->orelocation;
+
+ if (each_size == RELOC_EXT_SIZE)
+ {
+ for (natptr = native;
+ count != 0;
+ --count, natptr += each_size, ++generic)
+ NAME(lynx,swap_ext_reloc_out) (abfd, *generic, (struct reloc_ext_external *)natptr);
+ }
+ else
+ {
+ for (natptr = native;
+ count != 0;
+ --count, natptr += each_size, ++generic)
+ NAME(lynx,swap_std_reloc_out)(abfd, *generic, (struct reloc_std_external *)natptr);
+ }
+
+ if ( bfd_write ((PTR) native, 1, natsize, abfd) != natsize) {
+ bfd_release(abfd, native);
+ return false;
+ }
+ bfd_release (abfd, native);
+
+ return true;
+}
+
+/* This is stupid. This function should be a boolean predicate */
+unsigned int
+DEFUN(NAME(lynx,canonicalize_reloc),(abfd, section, relptr, symbols),
+ bfd *abfd AND
+ sec_ptr section AND
+ arelent **relptr AND
+ asymbol **symbols)
+{
+ arelent *tblptr = section->relocation;
+ unsigned int count;
+
+ if (!(tblptr || NAME(lynx,slurp_reloc_table)(abfd, section, symbols)))
+ return 0;
+
+ if (section->flags & SEC_CONSTRUCTOR) {
+ arelent_chain *chain = section->constructor_chain;
+ for (count = 0; count < section->reloc_count; count ++) {
+ *relptr ++ = &chain->relent;
+ chain = chain->next;
+ }
+ }
+ else {
+ tblptr = section->relocation;
+ if (!tblptr) return 0;
+
+ for (count = 0; count++ < section->reloc_count;)
+ {
+ *relptr++ = tblptr++;
+ }
+ }
+ *relptr = 0;
+
+ return section->reloc_count;
+}
+
+#define MY_canonicalize_reloc NAME(lynx,canonicalize_reloc)
+
+#include "aout-target.h"
projects / deliverable / binutils-gdb.git / commitdiff
