+2002-04-19 Nathanael Nerode <neroden@twcny.rr.com>
+
+ * configure.in: remove references to dead files
+
2002-04-17 Nathanael Nerode <neroden@twcny.rr.com>
* configure.in: Move default CC setting out of config/mh-* fragments
+2002-04-19 Nathanael Nerode <neroden@twcny.rr.com>
+
+ * mh-a68bsd: clean out dead code
+ * mh-apollo68: clean out dead code
+ * mh-cxux: clean out dead code
+ * mh-decstation: clean out dead code
+ * mh-dgux: clean out dead code
+ * mh-dgux386: clean out dead code
+ * mh-hp300: clean out dead code
+ * mh-hpux: clean out dead code
+ * mh-hpux8: clean out dead code
+ * mh-interix: clean out dead code
+ * mh-irix4: clean out dead code
+ * mh-lynxrs6k: clean out dead code
+ * mh-mingw32: clean out dead code
+ * mh-ncr3000: clean out dead code
+ * mh-ncrsvr43: clean out dead code
+ * mh-necv4: clean out dead code
+ * mh-openedition: clean out dead code
+ * mh-riscos: clean out dead code
+ * mh-sco: clean out dead code
+ * mh-sysv4: clean out dead code
+ * mh-lynxos: removed, contained only dead code
+ * mh-vaxult2: removed, contained only dead code
+ * mh-sun3: removed, contained only dead code
+
2002-04-15 Keith Seitz <keiths@redhat.com>
* acinclude.m4 (CYG_AC_PATH_TCLCONFIG): Search the win/ directory,
RANLIB=true
-
-#None of the Apollo compilers can compile gas or binutils. The preprocessor
-# chokes on bfd, the compiler won't let you assign integers to enums, and
-# other problems. Defining CC to gcc is a questionable way to say "don't use
-# the apollo compiler" (the preferred version of GCC could be called cc,
-# or whatever), but I'm not sure leaving CC as cc is any better...
-
-#CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
-CC=gcc
-
BISON=yacc
HDEFINES = -DUSG
RANLIB=true
-CC= cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG
SYSV = -DSYSV -DSVR4
RANLIB = true
-# C++ debugging is not yet supported under SVR4 (DWARF)
-CXXFLAGS=-O
-
# The l flag generates a warning from the SVR4 archiver, remove it.
AR_FLAGS = cq
-# Under CX/UX, we want to tell the compiler to use ANSI mode.
-CC=cc -Xa
-CC = cc -Wf,-XNg1000
-
# for X11, since the native DECwindows include files are really broken when
# it comes to function prototypes.
X11_EXTRA_CFLAGS = "-DNeedFunctionPrototypes=0"
HDEFINES=-DHOST_SYS=DGUX_SYS
-CC=gcc -Wall -ansi -D__using_DGUX
RANLIB=true
# from mh-dgux
HDEFINES=-DHOST_SYS=DGUX_SYS
-CC=gcc -Wall -ansi -D__using_DGUX
RANLIB = true
# from mh-sysv4
SYSV = -DSYSV -DSVR4
RANLIB = true
-# C++ debugging is not yet supported under SVR4 (DWARF)
-CXXFLAGS=-O
-
# The l flag generates a warning from the SVR4 archiver, remove it.
AR_FLAGS = cr
X11_EXTRA_LIBS = -lnsl
-# from angela
-# no debugging due to broken compiler, use BSD style timeofday
-CFLAGS=-O -D_BSD_TIMEOFDAY_FLAVOR
-
# Define SYSV as -DSYSV if you are using a System V operating system.
SYSV = -DSYSV
-# Avoid "too much defining" errors from HPUX compiler.
-CC = cc -Wp,-H256000
# If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
# If it's HP/UX ar, this should be harmless.
RANLIB = ar ts
-
-# Native cc can't bootstrap gcc with -g. Defining CFLAGS here loses (a)
-# for non-gcc directories, (b) if we are compiling with gcc, not
-# native cc. Neither (a) nor (b) has a trivial fix though.
-
-CFLAGS =
# Define SYSV as -DSYSV if you are using a System V operating system.
-CC = cc -Wp,-H256000
SYSV = -DSYSV
RANLIB = true
# Define SYSV as -DSYSV if you are using a System V operating system.
-CC = cc -Wp,-H256000
SYSV = -DSYSV
RANLIB = true
SHELL = sh
RANLIB = true
-# We don't want debugging info in Interix-hosted toolchains.
-# Accomplish this by overriding CFLAGS. This is also a workaround
-# for LD crash when building shared libstdc++.
-CFLAGS=-O2
-CXXFLAGS=-O2
-
# We also need to override LIBGCC2_DEBUG_CFLAGS so libgcc2 will be
# built without debugging information
# Makefile changes for SGI's running IRIX-4.x.
-# Tell compiler to use K&R C. We can't compile under the SGI Ansi
-# environment. Also bump switch table size so that cp-parse will
-# compile. Bump string length limit so linker builds.
-
-CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192
SYSV = -DSYSV
+++ /dev/null
-# /bin/cc is less than useful for our purposes. Always use GCC
-CC = /bin/gcc
# LynxOS running on the rs6000 doesn't have ranlib
RANLIB = true
-# /bin/cc is less than useful for our purposes. Always use GCC
-CC = /usr/cygnus/progressive/bin/gcc
-
# /bin/sh is too buggy, so use /bin/bash instead.
SHELL = /bin/bash
-# We don't want debugging info in Win32-hosted toolchains.
-# Accomplish this by overriding CFLAGS.
-CFLAGS=-O2
-CXXFLAGS=-O2
-
# We also need to override LIBGCC2_DEBUG_CFLAGS so libgcc2 will be
# built without debugging information
# Host configuration file for an NCR 3000 (i486/SVR4) system.
-# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
-# This compiler not only emits obnoxious copyright messages every time
-# you run it, but it chokes and dies on a whole bunch of GNU source
-# files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
-# Unfortunately though, the AT&T compiler sometimes generates code that
-# the assembler barfs on if -g is used, so disable it by default as well.
-CC = /usr/ccs/ATT/cc
-CFLAGS =
-
# Define SYSV as -DSYSV if you are using a System V operating system.
SYSV = -DSYSV -DSVR4
RANLIB = true
# Host configuration file for an NCR 3000 (i486/SVR43) system.
-# The MetaWare compiler will generate a copyright message unless you
-# turn it off by adding the -Hnocopyr flag.
-CC = cc -Hnocopyr
-
# Define SYSV as -DSYSV if you are using a System V operating system.
SYSV = -DSYSV -DSVR4
RANLIB = true
# Host Makefile fragment for NEC MIPS SVR4.
-# The C compiler on NEC MIPS SVR4 needs bigger tables.
-CC = cc -ZXNd=5000 -ZXNg=1000
-
# Define SYSV as -DSYSV if you are using a System V operating system.
SYSV = -DSYSV -DSVR4
RANLIB = true
# This is for a MIPS running RISC/os 4.52C.
-# This is needed for GDB, but needs to be in the top-level make because
-# if a library is compiled with the bsd headers and gets linked with the
-# sysv system libraries all hell can break loose (e.g. a jmp_buf might be
-# a different size).
-# ptrace(2) apparently has problems in the BSD environment. No workaround is
-# known except to select the sysv environment. Could we use /proc instead?
-# These "sysv environments" and "bsd environments" often end up being a pain.
-#
-# This is not part of CFLAGS because perhaps not all C compilers have this
-# option.
-CC= cc -systype sysv
-
RANLIB = true
RANLIB = true
# You may need this if you don't have bison.
# BISON = yacc -Sm10400
-# The native C compiler botches some simple uses of const. Unfortunately,
-# it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
-CC = cc -Dconst=
X11_EXTRA_LIBS = -lsocket -lm -lintl -lmalloc
+++ /dev/null
-# Sun's C compiler needs the -J flag to be able to compile cp-parse.c
-# without overflowing the jump tables (-J says to use a 32 bit table)
-CC = cc -J
SYSV = -DSYSV -DSVR4
RANLIB = true
-# C++ debugging is not yet supported under SVR4 (DWARF)
-CXXFLAGS=-O
-
# The l flag generates a warning from the SVR4 archiver, remove it.
AR_FLAGS = cr
+++ /dev/null
-# The old BSD pcc isn't up to compiling parts of gdb so use gcc
-CC = gcc
vax-*-ultrix2*)
# The old BSD pcc isn't up to compiling parts of gdb so use gcc
tentative_cc=gcc
- host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
;;
*-*-solaris2*)
host_makefile_frag="${host_makefile_frag} config/mh-solaris"
# Sun's C compiler needs the -J flag to be able to compile cp-parse.c
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
- host_makefile_frag="${host_makefile_frag} config/mh-sun3"
;;
*-hp-hpux[78]*)
tentative_cc="cc -Wp,-H256000"
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
- host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
;;
*-*-sysv4*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
projects / deliverable / binutils-gdb.git / commitdiff
