Removed, no longer used.

diff --git a/gdb/testsuite/config/sparclet-old.exp b/gdb/testsuite/config/sparclet-old.exp
deleted file mode 100644 (file)
index 5a9dd91..0000000
--- a/gdb/testsuite/config/sparclet-old.exp
+++ /dev/null
@@ -1,461 +0,0 @@
-#   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# DejaGnu@cygnus.com
-
-# This file was written by Michael Snyder <msnyder@cygnus.com>.
-
-# GDB support routines for a board using the sparclet remote debugging
-# protocol.
-
-load_lib remote.exp
-load_lib gdb.exp
-set gdb_prompt "\\(gdbslet\\)"
-
-
-#
-# Sparclet remote run command.
-#
-# This requires that we beep the user and ask him to push the board reset!
-# Then we will switch to the monitor target, run the program, use 2 ^C's
-# to interrupt the monitor target, and switch back to the remote target.
-# Then we have to do a continue to get past the stub breakpoint.
-#
-
-proc gdb_run_cmd {} {
-    global gdb_prompt
-
-    set timeout 60
-    verbose "Timeout is now $timeout seconds, starting remote stub" 2
-    send_user "\aPlease reset the board now...\a\n"
-    sleep 1
-    send_user "\a\n"
-    sleep 1
-    send_user "\a\n"
-    sleep 1
-    send_user "\a\n"
-
-    # go back to monitor, run the program, interrupt it, and start remote.
-
-    if [target_info exists gdb_protocol] {
-       set protocol [target_info gdb_protocol];
-    } else {
-       set protocol "sparclet"
-    }
-    if [target_info exists serial] {
-       set targetname [target_info serial];
-       send_gdb "target $protocol [target_info serial]\n";
-    } else {
-       if ![target_info exists netport] {
-           perror "Need either netport or gdb_serial entry for [target_info name].";
-           return -1;
-       }
-       set targetname [target_info netport];
-       send_gdb "target $protocol udp [target_info netport]\n";
-    }
-
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "Remote target.*$gdb_prompt $" { }
-        -re ".*SPARCLET appears to be alive.*$gdb_prompt $" {
-           if $verbose>1 then {
-               send_user "Set target to $targetname\n"
-           }
-       }
-        timeout { 
-           set timeout 10
-           verbose "Timeout is now $timeout seconds" 2
-           perror "Couldn't set SPARCLET target."
-           return -1
-       }
-    }
-
-    send_gdb "disable\n";
-    gdb_expect {
-        -re ".*$gdb_prompt $" {
-           verbose "Breakpoints disabled" 2
-       }
-        timeout { 
-           perror "(timeout) disabling breakpoints";
-           return -1 
-       }
-        default {
-           perror "error disabling breakpoints";
-       }
-    }
-    send_gdb "run\n";
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "The program being debugged .*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*Starting program:.*$" { 
-           verbose "Starting remote stub succeeded" 
-       }
-        timeout { 
-           perror "(timeout) starting the remote stub" ; 
-           return -1 
-       }
-        default {
-           perror "error starting the remote stub";
-       }
-    }
-    sleep 2;
-    send_gdb "\ 3"
-    sleep 1;
-    send_gdb "\ 3"
-    verbose "Sent ^C^C"
-    gdb_expect {
-        -re ".*Give up .and stop debugging it.*$" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*$gdb_prompt $" { 
-           verbose "interrupting remote stub succeeded"
-       }
-        timeout { 
-           perror "(timeout) interrupting the remote stub";
-           return -1 
-       }
-        default {
-           perror "error interrupting the remote stub";
-       }
-    }
-
-    if [target_info exists gdb_serial] {
-       send_gdb "target remote [target_info gdb_serial]\n"
-       gdb_expect {
-            -re ".*Kill it?.*y or n.*" {
-               send_gdb "y\n";
-               exp_continue
-           }
-            -re ".*$gdb_prompt $"      {
-               verbose "connected to stub at [target_info gdb_serial]" 2
-           }
-            timeout { 
-               set timeout 10
-               verbose "Timeout is now $timeout seconds" 2
-               perror "Couldn't set remote target."
-               return -1
-           }
-       }
-    }
-
-    send_gdb "enable\n";
-    gdb_expect {
-        -re ".*$gdb_prompt $" {
-           verbose "Breakpoints enabled" 2
-       }
-        timeout { 
-           perror "(timeout) enabling breakpoints";
-           return -1 
-       }
-        default {
-           perror "error enabling breakpoints";
-       }
-    }
-    send_gdb "continue\n";
-    return
-}
-
-
-#
-# gdb_load -- load a file into the GDB. 
-#             Returns a 0 if there was an error,
-#                       1 if it load successfully.
-#
-proc gdb_load { arg } {
-    global verbose
-    global loadpath
-    global loadfile
-    global gdb_prompt
-    global GDB
-    global expect_out
-
-    set loadfile [file tail $arg]
-    set loadpath [file dirname $arg]
-
-    if [target_info exists gdb_protocol] {
-       set protocol [target_info gdb_protocol];
-    } else {
-       set protocol "sparclet"
-    }
-
-    # get the stub-based loader for faster loading
-    send_gdb "file [target_info gdb_loader]\n"
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-         -re "Load new symbol table.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "Reading symbols from.*done..*$gdb_prompt $" {}
-        -re "$gdb_prompt $" { perror "GDB couldn't find loader" }
-        timeout { 
-           perror "(timeout) read symbol file" ; 
-           return -1
-       }
-    }
-
-    if [target_info exists serial] {
-       set targetname [target_info serial];
-       send_gdb "target $protocol [target_info serial]\n";
-    } else {
-       if ![target_info exists netport] {
-           perror "Need either netport or gdb_serial entry for [target_info name].";
-           return -1;
-       }
-       set targetname [target_info netport];
-       send_gdb "target $protocol udp [target_info netport]\n";
-    }
-    gdb_expect {
-        -re "Remote target.*$gdb_prompt $" { }
-        -re ".*SPARCLET appears to be alive.*$gdb_prompt $" {
-           if $verbose>1 then {
-               send_user "Set target to $targetname\n"
-           }
-       }
-        timeout { 
-           set timeout 10
-           verbose "Timeout is now $timeout seconds" 2
-           perror "Couldn't set SPARCLET target."
-           return -1
-       }
-    }
-
-    send_gdb "run\n";
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "The program being debugged .*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*Starting program:.*loader.*$" { 
-           verbose "Starting loader succeeded" 
-       }
-        timeout { 
-           perror "(timeout) starting the loader" ; 
-           return -1 
-       }
-        default {
-           perror "error starting the loader";
-       }
-    }
-    sleep 2;
-    send_gdb "\ 3"
-    sleep 1;
-    send_gdb "\ 3"
-    verbose "Sent ^C^C"
-    gdb_expect {
-        -re ".*Give up .and stop debugging it.*$" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*$gdb_prompt $" { 
-           verbose "Running loader succeeded" 
-       }
-        timeout { 
-           perror "(timeout) interrupting the loader" ; 
-           return -1 
-       }
-        default {
-           perror "error interrupting the loader";
-       }
-    }
-
-    # Now ready to actually load the file:
-
-    send_gdb "file $arg\n"
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-         -re "Load new symbol table.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "Reading symbols from.*done..*$gdb_prompt $" {}
-        -re "$gdb_prompt $" { perror "GDB couldn't read file" }
-        timeout { 
-           perror "(timeout) read symbol file" ; 
-           return -1 
-       }
-    }
-
-    if [target_info exists gdb_serial] {
-       send_gdb "target remote [target_info gdb_serial]\n"
-       gdb_expect {
-            -re ".*Kill it?.*y or n.*" {
-               send_gdb "y\n";
-               exp_continue
-           }
-            -re ".*$gdb_prompt $"      {
-               verbose "Set remote target to [target_info serial]" 2
-           }
-            timeout { 
-               set timeout 10
-               verbose "Timeout is now $timeout seconds" 2
-               perror "Couldn't set remote target."
-               return -1
-           }
-       }
-    }
-    if [target_info exists gdb_load_offset] {
-       set offset "[target_info gdb_load_offset]";
-    } else {
-       set offset "";
-    }
-    send_gdb "load $arg $offset\n"
-    verbose "Loading $arg into $GDB" 2
-    set timeout 1200
-    verbose "Timeout is now $timeout seconds" 2
-    gdb_expect {
-        -re "Loading.*$gdb_prompt $" {
-           verbose "Loaded $arg into $GDB" 1
-           set timeout 60
-           verbose "Timeout is now $timeout seconds" 2
-       }
-        -re "$gdb_prompt $"     {
-           if $verbose>1 then {
-               perror "GDB couldn't load."
-           }
-       }
-        timeout {
-           if $verbose>1 then {
-               perror "Timed out trying to load $arg."
-           }
-       }
-    }
-
-    send_user "\aPlease reset the board now...\a\n"
-    sleep 1
-    send_user "\a\n"
-    sleep 1
-    send_user "\a\n"
-    sleep 1
-    send_user "\a\n"
-
-    # go back to monitor, run the program, interrupt it, and start remote.
-
-    if [target_info exists serial] {
-       set targetname [target_info serial];
-       send_gdb "target $protocol [target_info serial]\n";
-    } else {
-       if ![target_info exists netport] {
-           perror "Need either netport or gdb_serial entry for [target_info name].";
-           return -1;
-       }
-       set targetname [target_info netport];
-       send_gdb "target $protocol udp [target_info netport]\n";
-    }
-
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "Remote target.*$gdb_prompt $" { }
-        -re ".*SPARCLET appears to be alive.*$gdb_prompt $" {
-           if $verbose>1 then {
-               send_user "Set target to $targetname\n"
-           }
-       }
-        timeout { 
-           set timeout 10
-           verbose "Timeout is now $timeout seconds" 2
-           perror "Couldn't set SPARCLET target."
-           return -1
-       }
-    }
-
-    send_gdb "run\n";
-    gdb_expect {
-        -re "A program is being debug.*Kill it.*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re "The program being debugged .*y or n. $" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*Starting program:.*$" { 
-           verbose "Starting remote stub succeeded" 
-       }
-        timeout { 
-           perror "(timeout) starting the remote stub" ; 
-           return -1 
-       }
-        default {
-           perror "error starting the remote stub";
-       }
-    }
-    sleep 2;
-    send_gdb "\ 3"
-    sleep 1;
-    send_gdb "\ 3"
-    verbose "Sent ^C^C"
-    gdb_expect {
-        -re ".*Give up .and stop debugging it.*$" {
-           send_gdb "y\n"
-           exp_continue
-       }
-        -re ".*$gdb_prompt $" { 
-           verbose "interrupting remote stub succeeded"
-       }
-        timeout { 
-           perror "(timeout) interrupting the remote stub";
-           return -1 
-       }
-        default {
-           perror "error interrupting the remote stub";
-       }
-    }
-
-    if [target_info exists gdb_serial] {
-       send_gdb "target remote [target_info gdb_serial]\n"
-       gdb_expect {
-            -re ".*Kill it?.*y or n.*" {
-               send_gdb "y\n";
-               exp_continue
-           }
-            -re ".*$gdb_prompt $"      {
-               verbose "connected to stub at [target_info gdb_serial]" 2
-           }
-            timeout { 
-               set timeout 10
-               verbose "Timeout is now $timeout seconds" 2
-               perror "Couldn't set remote target."
-               return -1
-           }
-       }
-    }
-    return 0
-}