arm/dts: Add initial DT support for AM33XX SoC family

Add device tree source include file for the AM33XX SoC family.
An additional .dtsi file is created to describe the generic
AM33XX CPU module like intc, ocp.

Actual selection of available peripherals is handled in seperate
.dts files using this am33xx.dtsi generic header file.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
new file mode 100644 (file)
index 0000000..f46e353
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -0,0 +1,189 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+       compatible = "ti,am33xx";
+
+       aliases {
+               serial0 = &uart1;
+               serial1 = &uart2;
+               serial2 = &uart3;
+               serial3 = &uart4;
+               serial4 = &uart5;
+               serial5 = &uart6;
+       };
+
+       cpus {
+               cpu@0 {
+                       compatible = "arm,cortex-a8";
+               };
+       };
+
+       /*
+        * The soc node represents the soc top level view. It is uses for IPs
+        * that are not memory mapped in the MPU view or for the MPU itself.
+        */
+       soc {
+               compatible = "ti,omap-infra";
+               mpu {
+                       compatible = "ti,omap3-mpu";
+                       ti,hwmods = "mpu";
+               };
+       };
+
+       /*
+        * XXX: Use a flat representation of the AM33XX interconnect.
+        * The real AM33XX interconnect network is quite complex.Since
+        * that will not bring real advantage to represent that in DT
+        * for the moment, just use a fake OCP bus entry to represent
+        * the whole bus hierarchy.
+        */
+       ocp {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               ti,hwmods = "l3_main";
+
+               intc: interrupt-controller@48200000 {
+                       compatible = "ti,omap2-intc";
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+                       ti,intc-size = <128>;
+                       reg = <0x48200000 0x1000>;
+               };
+
+               gpio1: gpio@44e07000 {
+                       compatible = "ti,omap4-gpio";
+                       ti,hwmods = "gpio1";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               gpio2: gpio@4804C000 {
+                       compatible = "ti,omap4-gpio";
+                       ti,hwmods = "gpio2";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               gpio3: gpio@481AC000 {
+                       compatible = "ti,omap4-gpio";
+                       ti,hwmods = "gpio3";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               gpio4: gpio@481AE000 {
+                       compatible = "ti,omap4-gpio";
+                       ti,hwmods = "gpio4";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               uart1: serial@44E09000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart1";
+                       clock-frequency = <48000000>;
+               };
+
+               uart2: serial@48022000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart2";
+                       clock-frequency = <48000000>;
+               };
+
+               uart3: serial@48024000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart3";
+                       clock-frequency = <48000000>;
+               };
+
+               uart4: serial@481A6000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart4";
+                       clock-frequency = <48000000>;
+               };
+
+               uart5: serial@481A8000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart5";
+                       clock-frequency = <48000000>;
+               };
+
+               uart6: serial@481AA000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart6";
+                       clock-frequency = <48000000>;
+               };
+
+               i2c1: i2c@44E0B000 {
+                       compatible = "ti,omap4-i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "i2c1";
+               };
+
+               i2c2: i2c@4802A000 {
+                       compatible = "ti,omap4-i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "i2c2";
+               };
+
+               i2c3: i2c@4819C000 {
+                       compatible = "ti,omap4-i2c";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "i2c3";
+               };
+
+               mcspi1: spi@48030000 {
+                       compatible = "ti,omap2-mcspi";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "spi0";
+                       ti,spi-num-cs = <4>;
+               };
+
+               mcspi2: spi@481Aa000 {
+                       compatible = "ti,omap2-mcspi";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "spi1";
+                       ti,spi-num-cs = <2>;
+               };
+
+               mmc1: mmc@48060000 {
+                       compatible = "ti,omap3-hsmmc";
+                       ti,hwmods = "mmc1";
+               };
+
+               mmc2: mmc@481D8000 {
+                       compatible = "ti,omap3-hsmmc";
+                       ti,hwmods = "mmc2";
+               };
+
+               mmc3: mmc@47810000 {
+                       compatible = "ti,omap3-hsmmc";
+                       ti,hwmods = "mmc3";
+               };
+       };
+};