Complement commit
ffe54b3798db ("Pad sections according to current
script FILL.") and add a FILL script statement test for targets that
impose the minimum alignment of more than 2**2 for the `.text' section.
These targets include IA-64 targets, MIPS targets other than bare-metal
ELF and VxWorks, TILE-Gx targets, TILEPro targets and X86-64 PE targets.
Use the `notarget' tag for configuration triplets that are incompatible
with the new test, but are supported by the existing FILL test, and
`xfail' for ones that have issues due to section alignment or padding
with both tests. Make a complementary change to the existing FILL test,
removing the following test issues:
arm-epoc-pe -FAIL: ld-scripts/fill
mips-elf -XPASS: ld-scripts/fill
mips-img-elf -XPASS: ld-scripts/fill
mips-mti-elf -XPASS: ld-scripts/fill
mips-sde-elf -XPASS: ld-scripts/fill
mips-vxworks -XPASS: ld-scripts/fill
mipsel-elf -XPASS: ld-scripts/fill
mipsel-img-elf -XPASS: ld-scripts/fill
mipsel-mti-elf -XPASS: ld-scripts/fill
mipsel-vxworks -XPASS: ld-scripts/fill
mipsisa32-elf -XPASS: ld-scripts/fill
mipsisa32el-elf -XPASS: ld-scripts/fill
mipsisa64-elf -XPASS: ld-scripts/fill
mipsisa64el-elf -XPASS: ld-scripts/fill
tilegx-linux -FAIL: ld-scripts/fill
tilepro-elf -FAIL: ld-scripts/fill
tx39-elf -XPASS: ld-scripts/fill
ld/
* testsuite/ld-scripts/fill.d: Adjust `xfail' entries. Add
`notarget' entries. Update comments.
* testsuite/ld-scripts/fill16.d: New test.
* testsuite/ld-scripts/fill16_0.s: New test source.
* testsuite/ld-scripts/fill16_1.s: New test source.
* testsuite/ld-scripts/fill16_2.s: New test source.
* testsuite/ld-scripts/data.exp: Run the new test.
+2017-07-19 Maciej W. Rozycki <macro@imgtec.com>
+
+ * testsuite/ld-scripts/fill.d: Adjust `xfail' entries. Add
+ `notarget' entries. Update comments.
+ * testsuite/ld-scripts/fill16.d: New test.
+ * testsuite/ld-scripts/fill16_0.s: New test source.
+ * testsuite/ld-scripts/fill16_1.s: New test source.
+ * testsuite/ld-scripts/fill16_2.s: New test source.
+ * testsuite/ld-scripts/data.exp: Run the new test.
+
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
run_dump_test data
run_dump_test fill
+run_dump_test fill16
#source: fill_2.s
#ld: -T fill.t
#objdump: -s -j .text
-#xfail: ia64-*-* alpha-*-*ecoff m32c-*-* mips*-*-* sh-*-pe sparc*-*-coff
+#notarget: ia64-*-*
+#notarget: mips*-*-irix* mips*-*-linux* mips*-*-freebsd* mips*-*-gnu*
+#notarget: mips*-*-kfreebsd* mips*-*-netbsd* mips*-*-openbsd* mips*-*-sysv4*
+#notarget: tilegx*-*-*
+#notarget: tilepro-*-*
+#notarget: x86_64-*-cygwin x86_64-*-mingw* x86_64-*-pe*
+#xfail: alpha*-*-*ecoff
+#xfail: arm-epoc-pe
+#xfail: m32c-*-*
+#xfail: sh-*-pe
+#xfail: sparc*-*-coff
#xfail: tic30-*-coff tic4x-*-* tic54x-*-*
-#xfail: x86_64-*-pe* x86_64-*-mingw* x86_64-*-cygwin z8k-*-*
-# Breaks on ia64 due to minimum alignment of code. The section alignment
-# could be increased to suit ia64 but then we'd break many coff targets
-# that don't support alignment other than 4 bytes.
-# alpha-linuxecoff always aligns code to 16 bytes.
-# m32c pads out code sections to 8 bytes.
-# mips aligns to 16 bytes
+#xfail: z8k-*-*
+#
+# See also fill16.d. We use `notarget' for configurations unsupported
+# here that are covered there, and `xfail' for configurations that work
+# in neither place. See below for details as to why individual
+# configurations are listed above.
+#
+# alpha-linuxecoff pads out code to 16 bytes.
+# arm-epoc-pe always pads out code to 512 bytes.
+# ia64 aligns code to minimum 16 bytes.
+# m32c pads out code sections with 4 NOPs (see `m32c_md_end').
+# mips aligns to minimum 16 bytes (except for bare-metal ELF and VxWorks).
# sh-pe pads out code sections to 16 bytes
# sparc-coff aligns to 8 bytes
# tic30-coff aligns to 2 bytes
# tic4x has 4 octet bytes
# tic54x doesn't support .p2align
+# tilegx aligns code to minimum 8 bytes.
+# tilepro aligns code to minimum 8 bytes.
# x86_64-pe aligns to 16 bytes
# z8k-coff aligns to 2 bytes
--- /dev/null
+#source: fill16_0.s
+#source: fill16_1.s
+#source: fill16_2.s
+#ld: -T fill.t
+#objdump: -s -j .text
+#notarget: arm-*-coff
+#notarget: i[3-7]86-*-coff
+#xfail: alpha*-*-*ecoff
+#xfail: arm-epoc-pe
+#xfail: m32c-*-*
+#xfail: sh-*-pe
+#xfail: sparc*-*-coff
+#xfail: tic30-*-coff tic4x-*-* tic54x-*-*
+#xfail: z8k-*-*
+#
+# See also fill.d. We use `notarget' for configurations unsupported
+# here that are covered there, and `xfail' for configurations that work
+# with neither place. See below for details as to why individual
+# configurations are listed above.
+#
+# alpha-linuxecoff pads out code to 16 bytes.
+# arm-epoc-pe always pads out code to 512 bytes.
+# arm-coff always aligns code to 4 bytes.
+# i386-coff always aligns code to 4 bytes.
+# m32c pads out code sections with 4 NOPs (see `m32c_md_end').
+# sh-pe pads out code sections to 16 bytes
+# sparc-coff aligns to 8 bytes
+# tic30-coff aligns to 2 bytes
+# tic4x has 4 octet bytes
+# tic54x doesn't support .p2align
+# z8k-coff aligns to 2 bytes
+
+.*: file format .*
+
+Contents of section .text:
+ [0-9a-f]+ cafebabe cafebabe cafebabe cafebabe .*
+ [0-9a-f]+ 01010101 01010101 01010101 01010101 .*
+ [0-9a-f]+ 02020202 02020202 02020202 02020202 .*
+ [0-9a-f]+ 12232323 23232323 23232323 23232323 .*
+ [0-9a-f]+ 03030303 03030303 03030303 03030303 .*
+ [0-9a-f]+ 00345600 00004567 000089ab (deadbeef|efbeadde) .*
+ [0-9a-f]+ 00004567 000089ab 0000cdef 00004567 .*
+ [0-9a-f]+ 000089ab 0000cdef 00000123 .*
--- /dev/null
+ .text
+ .p2align 4, 0
+ .byte 1,1,1,1
+ .byte 1,1,1,1
+ .byte 1,1,1,1
+ .byte 1,1,1,1
--- /dev/null
+ .text
+ .p2align 4, 0
+ .byte 2,2,2,2
+ .byte 2,2,2,2
+ .byte 2,2,2,2
+ .byte 2,2,2,2
--- /dev/null
+ .text
+ .p2align 4, 0
+ .byte 3,3,3,3
+ .byte 3,3,3,3
+ .byte 3,3,3,3
+ .byte 3,3,3,3
projects / deliverable / binutils-gdb.git / commitdiff
