Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
+2016-04-12 Pedro Alves <palves@redhat.com>
+
+ PR gdb/19828
+ * gnu-nat.c (inf_validate_task_sc): Don't call
+ target_terminal_ours / target_terminal_inferior around query.
+ * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
+ call target_terminal_ours / target_terminal_inferior around
+ yquery.
+ * linux-record.c (record_linux_system_call): Don't call
+ target_terminal_ours / target_terminal_inferior around yquery.
+ * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
+ / target_terminal_inferior around query.
+ * record-full.c (record_full_check_insn_num): Remove
+ 'set_terminal' parameter. Don't call target_terminal_ours /
+ target_terminal_inferior around query.
+ (record_full_message, record_full_registers_change)
+ (record_full_xfer_partial): Adjust.
+ * remote.c (interrupt_query): Don't call target_terminal_ours /
+ target_terminal_inferior around query.
+ * utils.c (defaulted_query): Install cleanup to restore target
+ terminal. Put target_terminal_ours_for_output in effect while
+ defaulted producing, and target_terminal_ours in in effect while
+ handling input.
+ (prompt_for_continue): Install cleanup to restore target terminal.
+ Put target_terminal_ours in in effect while handling input.
+
2016-04-12 Pedro Alves <palves@redhat.com>
* utils.c (defaulted_query, prompt_for_continue): Free temporary
if (inf->task->cur_sc < suspend_count)
{
- int abort;
-
- target_terminal_ours (); /* Allow I/O. */
- abort = !query (_("Pid %d has an additional task suspend count of %d;"
- " clear it? "), inf->pid,
- suspend_count - inf->task->cur_sc);
- target_terminal_inferior (); /* Give it back to the child. */
-
- if (abort)
+ if (!query (_("Pid %d has an additional task suspend count of %d;"
+ " clear it? "), inf->pid,
+ suspend_count - inf->task->cur_sc))
error (_("Additional task suspend count left untouched."));
inf->task->cur_sc = suspend_count;
{
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
Process record ignores the memory change of instruction at address %s\n\
because it can't get the value of the segment register.\n\
Do you want to stop the program?"),
- paddress (gdbarch, irp->orig_addr));
- target_terminal_inferior ();
- if (q)
- return -1;
+ paddress (gdbarch, irp->orig_addr)))
+ return -1;
}
return 0;
{
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
Process record ignores the memory change of instruction at address %s\n\
because it can't get the value of the segment register.\n\
Do you want to stop the program?"),
- paddress (gdbarch, ir.orig_addr));
- target_terminal_inferior ();
- if (q)
+ paddress (gdbarch, ir.orig_addr)))
return -1;
}
}
/* addr += ((uint32_t) read_register (I386_ES_REGNUM)) << 4; */
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
Process record ignores the memory change of instruction at address %s\n\
because it can't get the value of the segment register.\n\
Do you want to stop the program?"),
- paddress (gdbarch, ir.orig_addr));
- target_terminal_inferior ();
- if (q)
+ paddress (gdbarch, ir.orig_addr)))
return -1;
}
}
{
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
Process record ignores the memory change of instruction at address %s\n\
because it can't get the value of the segment register.\n\
Do you want to stop the program?"),
- paddress (gdbarch, ir.orig_addr));
- target_terminal_inferior ();
- if (q)
- return -1;
+ paddress (gdbarch, ir.orig_addr)))
+ return -1;
}
}
else
{
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
Process record ignores the memory change of instruction at address %s\n\
because it can't get the value of the segment register.\n\
Do you want to stop the program?"),
- paddress (gdbarch, ir.orig_addr));
- target_terminal_inferior ();
- if (q)
+ paddress (gdbarch, ir.orig_addr)))
return -1;
}
}
break;
case gdb_sys_exit:
- {
- int q;
-
- target_terminal_ours ();
- q = yquery (_("The next instruction is syscall exit. "
- "It will make the program exit. "
- "Do you want to stop the program?"));
- target_terminal_inferior ();
- if (q)
- return 1;
- }
+ if (yquery (_("The next instruction is syscall exit. "
+ "It will make the program exit. "
+ "Do you want to stop the program?")))
+ return 1;
break;
case gdb_sys_fork:
break;
case gdb_sys_reboot:
- {
- int q;
-
- target_terminal_ours ();
- q = yquery (_("The next instruction is syscall reboot. "
- "It will restart the computer. "
- "Do you want to stop the program?"));
- target_terminal_inferior ();
- if (q)
- return 1;
- }
+ if (yquery (_("The next instruction is syscall reboot. "
+ "It will restart the computer. "
+ "Do you want to stop the program?")))
+ return 1;
break;
case gdb_old_readdir:
regcache_raw_read_unsigned (regcache, tdep->arg2, &len);
if (record_full_memory_query)
{
- int q;
-
- target_terminal_ours ();
- q = yquery (_("\
+ if (yquery (_("\
The next instruction is syscall munmap.\n\
It will free the memory addr = 0x%s len = %u.\n\
It will make record target cannot record some memory change.\n\
Do you want to stop the program?"),
- OUTPUT_REG (tmpulongest, tdep->arg1), (int) len);
- target_terminal_inferior ();
- if (q)
+ OUTPUT_REG (tmpulongest, tdep->arg1), (int) len))
return 1;
}
}
break;
case gdb_sys_exit_group:
- {
- int q;
-
- target_terminal_ours ();
- q = yquery (_("The next instruction is syscall exit_group. "
- "It will make the program exit. "
- "Do you want to stop the program?"));
- target_terminal_inferior ();
- if (q)
- return 1;
- }
+ if (yquery (_("The next instruction is syscall exit_group. "
+ "It will make the program exit. "
+ "Do you want to stop the program?")))
+ return 1;
break;
case gdb_sys_lookup_dcookie:
static void
interrupt_query (void)
{
- target_terminal_ours ();
-
if (query (_("Interrupted while waiting for the program.\n\
Give up (and stop debugging it)? ")))
{
target_mourn_inferior ();
quit ();
}
-
- target_terminal_inferior ();
}
/* The user typed ^C twice. */
}
static void
-record_full_check_insn_num (int set_terminal)
+record_full_check_insn_num (void)
{
if (record_full_insn_num == record_full_insn_max_num)
{
/* Ask user what to do. */
if (record_full_stop_at_limit)
{
- int q;
-
- if (set_terminal)
- target_terminal_ours ();
- q = yquery (_("Do you want to auto delete previous execution "
+ if (!yquery (_("Do you want to auto delete previous execution "
"log entries when record/replay buffer becomes "
- "full (record full stop-at-limit)?"));
- if (set_terminal)
- target_terminal_inferior ();
- if (q)
- record_full_stop_at_limit = 0;
- else
+ "full (record full stop-at-limit)?")))
error (_("Process record: stopped by user."));
+ record_full_stop_at_limit = 0;
}
}
}
record_full_arch_list_tail = NULL;
/* Check record_full_insn_num. */
- record_full_check_insn_num (1);
+ record_full_check_insn_num ();
/* If gdb sends a signal value to target_resume,
save it in the 'end' field of the previous instruction.
record_full_registers_change (struct regcache *regcache, int regnum)
{
/* Check record_full_insn_num. */
- record_full_check_insn_num (0);
+ record_full_check_insn_num ();
record_full_arch_list_head = NULL;
record_full_arch_list_tail = NULL;
}
/* Check record_full_insn_num */
- record_full_check_insn_num (0);
+ record_full_check_insn_num ();
/* Record registers change to list as an instruction. */
record_full_arch_list_head = NULL;
interrupt_query (void)
{
struct remote_state *rs = get_remote_state ();
- struct cleanup *old_chain;
-
- old_chain = make_cleanup_restore_target_terminal ();
- target_terminal_ours ();
if (rs->waiting_for_stop_reply && rs->ctrlc_pending_p)
{
"Give up waiting? ")))
quit ();
}
-
- do_cleanups (old_chain);
}
/* Enable/disable target terminal ownership. Most targets can use
if (!confirm || server_command)
return def_value;
+ old_chain = make_cleanup_restore_target_terminal ();
+
/* If input isn't coming from the user directly, just say what
question we're asking, and then answer the default automatically. This
way, important error messages don't get lost when talking to GDB
over a pipe. */
if (! input_from_terminal_p ())
{
+ target_terminal_ours_for_output ();
wrap_here ("");
vfprintf_filtered (gdb_stdout, ctlstr, args);
y_string, n_string, def_answer);
gdb_flush (gdb_stdout);
+ do_cleanups (old_chain);
return def_value;
}
if (deprecated_query_hook)
{
- return deprecated_query_hook (ctlstr, args);
- }
+ int res;
- old_chain = make_cleanup (null_cleanup, NULL);
+ res = deprecated_query_hook (ctlstr, args);
+ do_cleanups (old_chain);
+ return res;
+ }
/* Format the question outside of the loop, to avoid reusing args. */
question = xstrvprintf (ctlstr, args);
/* Used for calculating time spend waiting for user. */
gettimeofday (&prompt_started, NULL);
+ /* We'll need to handle input. */
+ target_terminal_ours ();
+
while (1)
{
char *response, answer;
reinitialize_more_filter ();
/* We'll need to handle input. */
+ make_cleanup_restore_target_terminal ();
target_terminal_ours ();
/* Call gdb_readline_wrapper, not readline, in order to keep an
projects / deliverable / binutils-gdb.git / commitdiff
