# default_binutils_run
# run a program, returning the output
# sets binutils_run_failed if the program does not exist
+# sets binutils_run_status to the exit status of the program
#
proc default_binutils_run { prog progargs } {
global binutils_run_failed
+ global binutils_run_status
global host_triplet
set binutils_run_failed 0
+ if [info exists binutils_run_status] {
+ unset binutils_run_status
+ }
if ![is_remote host] {
if {[which $prog] == 0} then {
regsub -all "\\$" "$progargs" "\\$" progargs
set state [remote_exec host $prog $progargs]
+ set binutils_run_status [lindex $state 0]
set exec_output [prune_warnings [lindex $state 1]]
if {![string match "" $exec_output]} then {
send_log "$exec_output\n"
#
# error: REGEX
# An error with message matching REGEX must be emitted for the test
-# to pass. The PROG, objdump, nm and objcopy options have no
-# meaning and need not supplied if this is present.
+# to pass. The DUMPPROG, addr2line, nm, objdump, readelf and size
+# options have no meaning and need not supplied if this is present.
+# Multiple "error" directives append to the expected error message.
#
-# warning: REGEX
-# Expect a gas warning matching REGEX. It is an error to issue
-# both "error" and "warning".
+# error_output: FILE
+# Means the same as 'error', except the regular expression lines
+# are contains in FILE.
#
-# stderr: FILE
-# FILE contains regexp lines to be matched against the diagnostic
-# output of the assembler. This does not preclude the use of
-# PROG, nm, objdump, or objcopy.
+# warning: REGEX
+# Expect a warning matching REGEX. It is an error to issue both
+# "error" and "warning". Multiple "warning" directives append to
+# the expected linker warning message.
#
-# error-output: FILE
-# Means the same as 'stderr', but also indicates that the assembler
-# is expected to exit unsuccessfully (therefore PROG, objdump, nm,
-# and objcopy have no meaning and should not be supplied).
+# warning_output: FILE
+# Means the same as 'warning', except the regular expression
+# lines are contains in FILE.
#
# Each option may occur at most once.
#
global OBJDUMP NM OBJCOPY READELF STRIP
global OBJDUMPFLAGS NMFLAGS OBJCOPYFLAGS READELFFLAGS STRIPFLAGS
global ELFEDIT ELFEDITFLAGS
+ global binutils_run_status
global host_triplet
global env
global copyfile
set opts(DUMPPROG) {}
set opts(source) {}
set opts(dump) {}
+ set opts(error) {}
+ set opts(warning) {}
+ set opts(error_output) {}
+ set opts(warning_output) {}
set opts(target) {}
set opts(not-target) {}
set opts(skip) {}
# directory.
regsub -all "\\\$srcdir" "$opt_val" "$srcdir/$subdir" opt_val
- if [string length $opts($opt_name)] {
- perror "option $opt_name multiply set in $file.d"
- unresolved $subdir/$name
- return
+ switch -- $opt_name {
+ warning {}
+ error {}
+ default {
+ if [string length $opts($opt_name)] {
+ perror "option $opt_name multiply set in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ }
}
- set opts($opt_name) $opt_val
+ append opts($opt_name) $opt_val
}
foreach i $extra_options {
# add extra option to end of existing option, adding space
# if necessary.
- if [string length $opts($opt_name)] {
+ if { ![regexp "warning|error" $opt_name]
+ && [string length $opts($opt_name)] } {
append opts($opt_name) " "
}
append opts($opt_name) $opt_val
}
set dumpprogram ""
- if { $opts(DUMPPROG) != "" } {
- switch -- $opts(DUMPPROG) {
- addr2line { set dumpprogram addr2line }
- nm { set dumpprogram nm }
- objdump { set dumpprogram objdump }
- readelf { set dumpprogram readelf }
- size { set dumpprogram size }
- default {
- perror "unrecognized dump program option $opts(DUMPPROG) in $file.d"
- unresolved $testname
- return }
- }
- } else {
- # Guess which program to run, by seeing which option was specified.
- foreach p {addr2line nm objdump readelf size} {
- if {$opts($p) != ""} {
- if {$dumpprogram != ""} {
- perror "more than one possible dump program specified in $file.d"
+ # It's meaningless to require an output-testing method when we
+ # expect an error.
+ if { $opts(error) == "" && $opts(error_output) == "" } {
+ if { $opts(DUMPPROG) != "" } {
+ switch -- $opts(DUMPPROG) {
+ addr2line { set dumpprogram addr2line }
+ nm { set dumpprogram nm }
+ objdump { set dumpprogram objdump }
+ readelf { set dumpprogram readelf }
+ size { set dumpprogram size }
+ default {
+ perror "unrecognized dump program option $opts(DUMPPROG)\
+ in $file.d"
unresolved $testname
return
- } else {
- set dumpprogram $p
+ }
+ }
+ } else {
+ # Guess which program to run, by seeing which option was specified.
+ foreach p {addr2line nm objdump readelf size} {
+ if {$opts($p) != ""} {
+ if {$dumpprogram != ""} {
+ perror "more than one possible dump program specified\
+ in $file.d"
+ unresolved $testname
+ return
+ } else {
+ set dumpprogram $p
+ }
}
}
}
}
}
+ if { (($opts(warning) != "") && ($opts(error) != "")) \
+ || (($opts(warning) != "") && ($opts(error_output) != "")) \
+ || (($opts(warning) != "") && ($opts(warning_output) != "")) \
+ || (($opts(error) != "") && ($opts(warning_output) != "")) \
+ || (($opts(error) != "") && ($opts(error_output) != "")) \
+ || (($opts(warning_output) != "") && ($opts(error_output) != "")) } {
+ perror "bad mix of warning, error, warning_output, and error_output\
+ test-directives"
+ unresolved $testname
+ return
+ }
+
+ set check_prog(source) ""
+ set check_prog(terminal) 0
+ if { $opts(error) != "" \
+ || $opts(warning) != "" \
+ || $opts(error_output) != "" \
+ || $opts(warning_output) != "" } {
+
+ if { $opts(error) != "" || $opts(error_output) != "" } {
+ set check_prog(terminal) 1
+ } else {
+ set check_prog(terminal) 0
+ }
+
+ if { $opts(error) != "" || $opts(warning) != "" } {
+ set check_prog(source) "regex"
+ if { $opts(error) != "" } {
+ set check_prog(regex) $opts(error)
+ } else {
+ set check_prog(regex) $opts(warning)
+ }
+ } else {
+ set check_prog(source) "file"
+ if { $opts(error_output) != "" } {
+ set check_prog(file) $opts(error_output)
+ } else {
+ set check_prog(file) $opts(warning_output)
+ }
+ }
+ }
+
set progopts1 $opts($program)
eval set progopts \$[string toupper $program]FLAGS
eval set binary \$[string toupper $program]
set exec_output [binutils_run $binary "$progopts $progopts1 $tempfile $destopt ${copyfile}.o"]
- if ![string match "" $exec_output] {
- send_log "$exec_output\n"
+ set cmdret 0
+ if [info exists binutils_run_status] {
+ set cmdret $binutils_run_status
+ }
+
+ regsub "\n$" $exec_output "" exec_output
+ if { $cmdret != 0 || $exec_output != "" || $check_prog(source) != "" } {
+ set exitstat "succeeded"
+ if { $cmdret != 0 } {
+ set exitstat "failed"
+ }
+
+ if { $check_prog(source) == "regex" } {
+ verbose -log "$exitstat with: <$exec_output>,\
+ expected: <$check_prog(regex)>"
+ } elseif { $check_prog(source) == "file" } {
+ verbose -log "$exitstat with: <$exec_output>,\
+ expected in file $check_prog(file)"
+ set_file_contents "tmpdir/prog.messages" "$exec_output"
+ } else {
+ verbose -log "$exitstat with: <$exec_output>, no expected output"
+ }
+ send_log -- "$exec_output\n"
verbose "$exec_output"
- fail $testname
- return
+
+ if { (($check_prog(source) == "") == ($exec_output == "")) \
+ && (($cmdret == 0) == ($check_prog(terminal) == 0)) \
+ && ((($check_prog(source) == "regex") \
+ && ($check_prog(regex) == "") == ($exec_output == "") \
+ && [regexp -- $check_prog(regex) $exec_output]) \
+ || (($check_prog(source) == "file") \
+ && (![regexp_diff "tmpdir/prog.messages" \
+ "$srcdir/$subdir/$check_prog(file)"]))) } {
+ # We have the expected output from prog.
+ if { $check_prog(terminal) || $program == "" } {
+ pass $testname
+ return
+ }
+ } else {
+ fail $testname
+ return
+ }
}
set progopts1 $opts($dumpprogram)
projects / deliverable / binutils-gdb.git / commitdiff
