void *priv);
};
+/**
+ * enum net_device_priv_flags - &struct net_device priv_flags
+ *
+ * These are the &struct net_device, they are only set internally
+ * by drivers and used in the kernel. These flags are invisible to
+ * userspace, this means that the order of these flags can change
+ * during any kernel release.
+ *
+ * You should have a pretty good reason to be extending these flags.
+ *
+ * @IFF_802_1Q_VLAN: 802.1Q VLAN device
+ * @IFF_EBRIDGE: Ethernet bridging device
+ * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active
+ * @IFF_MASTER_8023AD: bonding master, 802.3ad
+ * @IFF_MASTER_ALB: bonding master, balance-alb
+ * @IFF_BONDING: bonding master or slave
+ * @IFF_SLAVE_NEEDARP: need ARPs for validation
+ * @IFF_ISATAP: ISATAP interface (RFC4214)
+ * @IFF_MASTER_ARPMON: bonding master, ARP mon in use
+ * @IFF_WAN_HDLC: WAN HDLC device
+ * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to
+ * release skb->dst
+ * @IFF_DONT_BRIDGE: disallow bridging this ether dev
+ * @IFF_DISABLE_NETPOLL: disable netpoll at run-time
+ * @IFF_MACVLAN_PORT: device used as macvlan port
+ * @IFF_BRIDGE_PORT: device used as bridge port
+ * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port
+ * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit
+ * @IFF_UNICAST_FLT: Supports unicast filtering
+ * @IFF_TEAM_PORT: device used as team port
+ * @IFF_SUPP_NOFCS: device supports sending custom FCS
+ * @IFF_LIVE_ADDR_CHANGE: device supports hardware address
+ * change when it's running
+ * @IFF_MACVLAN: Macvlan device
+ */
+enum netdev_priv_flags {
+ IFF_802_1Q_VLAN = 1<<0,
+ IFF_EBRIDGE = 1<<1,
+ IFF_SLAVE_INACTIVE = 1<<2,
+ IFF_MASTER_8023AD = 1<<3,
+ IFF_MASTER_ALB = 1<<4,
+ IFF_BONDING = 1<<5,
+ IFF_SLAVE_NEEDARP = 1<<6,
+ IFF_ISATAP = 1<<7,
+ IFF_MASTER_ARPMON = 1<<8,
+ IFF_WAN_HDLC = 1<<9,
+ IFF_XMIT_DST_RELEASE = 1<<10,
+ IFF_DONT_BRIDGE = 1<<11,
+ IFF_DISABLE_NETPOLL = 1<<12,
+ IFF_MACVLAN_PORT = 1<<13,
+ IFF_BRIDGE_PORT = 1<<14,
+ IFF_OVS_DATAPATH = 1<<15,
+ IFF_TX_SKB_SHARING = 1<<16,
+ IFF_UNICAST_FLT = 1<<17,
+ IFF_TEAM_PORT = 1<<18,
+ IFF_SUPP_NOFCS = 1<<19,
+ IFF_LIVE_ADDR_CHANGE = 1<<20,
+ IFF_MACVLAN = 1<<21,
+};
+
+#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
+#define IFF_EBRIDGE IFF_EBRIDGE
+#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE
+#define IFF_MASTER_8023AD IFF_MASTER_8023AD
+#define IFF_MASTER_ALB IFF_MASTER_ALB
+#define IFF_BONDING IFF_BONDING
+#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP
+#define IFF_ISATAP IFF_ISATAP
+#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON
+#define IFF_WAN_HDLC IFF_WAN_HDLC
+#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE
+#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE
+#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL
+#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT
+#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT
+#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH
+#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING
+#define IFF_UNICAST_FLT IFF_UNICAST_FLT
+#define IFF_TEAM_PORT IFF_TEAM_PORT
+#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS
+#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
+#define IFF_MACVLAN IFF_MACVLAN
+
/*
* The DEVICE structure.
* Actually, this whole structure is a big mistake. It mixes I/O
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-/**
- * enum net_device_priv_flags - &struct net_device priv_flags
- *
- * These are the &struct net_device, they are only set internally
- * by drivers and used in the kernel. These flags are invisible to
- * userspace, this means that the order of these flags can change
- * during any kernel release.
- *
- * You should have a pretty good reason to be extending these flags.
- *
- * @IFF_802_1Q_VLAN: 802.1Q VLAN device
- * @IFF_EBRIDGE: Ethernet bridging device
- * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active
- * @IFF_MASTER_8023AD: bonding master, 802.3ad
- * @IFF_MASTER_ALB: bonding master, balance-alb
- * @IFF_BONDING: bonding master or slave
- * @IFF_SLAVE_NEEDARP: need ARPs for validation
- * @IFF_ISATAP: ISATAP interface (RFC4214)
- * @IFF_MASTER_ARPMON: bonding master, ARP mon in use
- * @IFF_WAN_HDLC: WAN HDLC device
- * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to
- * release skb->dst
- * @IFF_DONT_BRIDGE: disallow bridging this ether dev
- * @IFF_DISABLE_NETPOLL: disable netpoll at run-time
- * @IFF_MACVLAN_PORT: device used as macvlan port
- * @IFF_BRIDGE_PORT: device used as bridge port
- * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port
- * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit
- * @IFF_UNICAST_FLT: Supports unicast filtering
- * @IFF_TEAM_PORT: device used as team port
- * @IFF_SUPP_NOFCS: device supports sending custom FCS
- * @IFF_LIVE_ADDR_CHANGE: device supports hardware address
- * change when it's running
- * @IFF_MACVLAN: Macvlan device
- */
-enum netdev_priv_flags {
- IFF_802_1Q_VLAN = 1<<0,
- IFF_EBRIDGE = 1<<1,
- IFF_SLAVE_INACTIVE = 1<<2,
- IFF_MASTER_8023AD = 1<<3,
- IFF_MASTER_ALB = 1<<4,
- IFF_BONDING = 1<<5,
- IFF_SLAVE_NEEDARP = 1<<6,
- IFF_ISATAP = 1<<7,
- IFF_MASTER_ARPMON = 1<<8,
- IFF_WAN_HDLC = 1<<9,
- IFF_XMIT_DST_RELEASE = 1<<10,
- IFF_DONT_BRIDGE = 1<<11,
- IFF_DISABLE_NETPOLL = 1<<12,
- IFF_MACVLAN_PORT = 1<<13,
- IFF_BRIDGE_PORT = 1<<14,
- IFF_OVS_DATAPATH = 1<<15,
- IFF_TX_SKB_SHARING = 1<<16,
- IFF_UNICAST_FLT = 1<<17,
- IFF_TEAM_PORT = 1<<18,
- IFF_SUPP_NOFCS = 1<<19,
- IFF_LIVE_ADDR_CHANGE = 1<<20,
- IFF_MACVLAN = 1<<21,
-};
-
-#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
-#define IFF_EBRIDGE IFF_EBRIDGE
-#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE
-#define IFF_MASTER_8023AD IFF_MASTER_8023AD
-#define IFF_MASTER_ALB IFF_MASTER_ALB
-#define IFF_BONDING IFF_BONDING
-#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP
-#define IFF_ISATAP IFF_ISATAP
-#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON
-#define IFF_WAN_HDLC IFF_WAN_HDLC
-#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE
-#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE
-#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL
-#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT
-#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT
-#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH
-#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING
-#define IFF_UNICAST_FLT IFF_UNICAST_FLT
-#define IFF_TEAM_PORT IFF_TEAM_PORT
-#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS
-#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
-#define IFF_MACVLAN IFF_MACVLAN
-
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
projects / deliverable / linux.git / commitdiff
